Changing Canvas size to be smaller, is actually making it larger?

Hello,
OK, I have changed Canvas size a thousand times in my life and this has never happened before.
I have an image that is 1600 px wide and I want to trim the sides to 1260. When I start to even type in the smaller size, the file size indicated is larger (that was my first suspicion that something was not right). And sure enough, it is making the image larger?
Has this ever happened to anyone else?
thanks
babs

OMG ...I do!!!!!
I must be half asleep this morning!!!
Thank you!
babs

Similar Messages

Batch Process Change Canvas Size Buggy

I have 300+ products shots that need to go up to our website.
Using FW CS3 I was able to resize and optimize both full size
images and the thumbnails. The issue is due to our website setup
the thumbnails are expected to be exactly 100x100. If the canvas
size is irregular the image gets stretched or squeezed when served
up on the site.
So I created a custom action to set the canvas size to 100 x
100 with a white background and to expand from the center out. When
I run this manually everything is ducky. But when I add it to my
batch process the actual content of the thumbnails moves from image
to image. Some items are centered fine, some are too far left or
too far right (or high,low) some are shifted so much that they are
actually cut off to the left or right. There seems to be no rhyme
or reason to it.
Here is how the batch is set up:
It grabs the original file ( a press resolution PSD file) and
fit to size to 100 x 100. Then I run the command to set canvas size
to 100x100 white background. And then it exports it to optimized
jpeg. I have tried running the actions separately. And when I just
run the fit to size and optimization as a batch the thumbs look
fine no weird positioning. So I know it is the command.
Any ideas?

Thankyou Heath
If I choose scale > scale to fit area > then choose a maximum width or height, that works for that part of the process.
Percentage doesn’t work, because I need them to be a particular size (either width or height, doesn’t matter , as long as nither of them exceeds 00px)
For the part that I then want to find the smallest measurement (width or height) and make a particular size, there doesn’t seem to be any way that I can find in FW to do that.
But, after searching on line, I found an app that does all that and more, its brilliant. It will find the largest side, the smallest side, or whatever and change it to what you want and rescale the other side to fit.
This is the link - http://www.rw-designer.com/picture-resize
Fiona

Smart Objects...changing canvas size problem

When changing the canvas size of a smart object, the layer on the original document will distort visually since it doesn't update the size of the smart object.
Is there a solution to this, or an easy way to quickly update every instance of the smart object on the original doc?
To clarify: I know that you can change the dimensions of the smart object on the original doc and it'll fix it, my question is if there's a way to automatically have that happen and have the original doc smart objects respect your canvas size changes on the smart object doc.
Reproduce:
1) Draw a circle
2) Turn it into a smart object
3) Go into the smart object, change the canvas size by increasing the height of the canvas. The smart object should now have a circle with blank space above/below it.
4) Save the smart object
5) The circle on the original document will now be squished.
I'm using Photoshop CS5

xg3 wrote:
When changing the canvas size of a smart object, the layer on the original document will distort visually since it doesn't update the size of the smart object.
When you change the canvas size of a document the only layer that will change is a backgroung layer for it does not support transparency so its pixels will be changed. However a background layer should not distort it may be cropped and have canvas added in which case the color of the empty canvas can be set in the canvas size dialog. All other layer including Smart Object layer should not chang at all. Layer positioning in relationship to the canvas and the new canvas size is set during the canvas size change. Layers can be any size and have any aspect ratio. Their sizes can be smaller, the same or larger then the canvas size. Even layer that can fit within a documents canvas size may be positioned so that all, some or none of the layer is over the documents canvas.
I do not know what you mean when you write the original document chages. A smart object layer has an embedded copy of an object. The original document is not touched. You can open the smart object layer embedded object in Photoshop by double clicking on the smart object icon in the layers palette smart object layer and change it size. And distort it f you wish. When you use Photoshop save. Photoshop will change the enbedded object in the smart object layer. You can also leave the embedded smaro object as is and change the smart object layer size and distort it using transform on the smart object layer itsself.
I think what you did was to open the smart object in photoshop change its canvas saze then save it. The updated smart object is realy round but you dont see that it is becaue it is being transformec ti fit the original documents canvas. If you do a Canvas size on the codument you will see the original docyment canvas size is not change and thet your now squaching a now changed taller object into a shorter canvas. With each Smart Obkect layer there is as associated transform.
No I was wrong I just tried that and it looks like the transform was not the problem as yo can see I dir a Ctrl+T so you can see the size of the smart object layer is now biger then the original document and is positioned centered canvas is still 300x300 white area in image

Change canvas size in Final Cut Express?

I completed an animation in FCE before I realized that I did something foolish: My animation frames are shot in HD (1920x1080), but I failed to set my canvas size, which is NTSC. Now, when I export my animation, the video size is distorted.
Is there a way to change the canvas size of a movie so that it applies to existing sequences? Or, can a sequence's dimensions be changed? And, if not, can anyone recommend a workaround? I'm dealing with several thousand individual animation frames, so starting from scratch isn't an option for me.

You can't. FCE is a fixed resolution editing application, either DV or HD at 1080 or 720.

Change Canvas size on one dimension

I want to change the canvas size to account for a 2 in. leader. E.G. an 8.5 x 11 image to 8.5 x 13 in. But the 2 ins want to be at the lead end of the image, that which enters the printer first.
Thanks in advance for your help.

So set the Anchor in the Canvas Size-dialog accordingly and click Relative, or am I misunderstanding the problem?

Cropping + Changing Canvas Size

Hello,
I have a problem (because I'm a beginner in Photoshop), and it's that when I crop and image and try to change the canvas size - I change the size because I'm using another type of paper - (and anchor the image to the top left), the image looks like the way it was before the crop. Is there another way to do this? Am I doing it wrong?
Thanks

Ok, so, what I did:
New File 4x6 (in Custom)
Drag & Drop the picture to Photoshop (making a new layer in top of layer 0 or background)
Select the crop tool and arrange the picture like you want it to be seen after cropping it
After I have the picture cropped, I want to print it in a 4x6 paper, but when I click File>Print, the paper says 8.5x11 (which is the standard format)
Because I want it to be printed in 4x6 paper (so it can be correctly printed) I go to Image>Canvas Size and set the width and height of the canvas (in this case 4x6)
When I do this, the canvas becomes large again, but the picture looks like the way it was before the crop.
My question is if I'm doing this wrong, or if there's another way. Hope you understand. I added the pictures in order, just in case.

How to resize photoshop image without changing canvas size?

When i had the older versions of photoshop i would change the image size and it would enlarge on my canvas for me to rearrange. Lately i realized on CC when i increase image size so does my canvas size. Is there anyway to prevent my canvas size from increasing too?

I am having what appears to be this same issue.    I am using PS CC.
hello @ c.pfaffenbichler
I resized my image in image> image size.
Details:
I am not a ps expert but woefully self taught. However through much trial and error I have in my experience over the years, achieved some comfortability with the image size dialog box as well as the canvas size dialog box. SOME comfortability lol. That is, I feel that I understand what is going on most of the time and when flummoxed have studied adobe literature or read hundreds of posts here and elsewhere to gain additional knowledge which many times resolves the issue. I like digging and finding the answers.
In this case, my digging is done dug a giant hole and I am exhausted and found nuthin'.
I feel like I am going nutso.
In my mind,
1. There is the image I am working on
2. There is the canvas the image is sitting on
My expectation and previous experience is that I can change the Image size by going to Image > image size and this change does not affect the canvas size.
My expectation and previous experience is that I can go to Image >canvas size and change the canvas size and this does not affect the image size.
I could also use the Transform to resize the image which also, would not in my expectation, change the canvas size.
In the beginning of my workflow on this particular collage I did not have this issue, so that leads me to believe I did or am doing something to cause this rather than it being some kind of bug.    But what do I know.
I thank you in advance for your assistance.

Caannot change printing size from very small to 12 pt

Sometime in the last week, any printing that I do comes out in such a tiny point that it is difficult to read. Just contacted the Canon people and the problem is not in their software. I did change the size to larger, have done that several times and it has always gone back to regular size. What have I done wrong?

See:
*https://support.mozilla.org/kb/how-print-websites
*http://kb.mozillazine.org/Problems_printing_web_pages

Photoshop pdfs change canvas size when being viewed in Acrobat

Hi, I am an issue when with saving photoshop pdfs from photoshop cc. They look good when they are in photoshop but when I save them to a pdf and then try to view them in acrobat the page size changes. Usually it defaults to 8.5 by 11 regardless of the size I set up in Photoshop. Does any one know why this might be? I am using Photoshop cc and Acrobat 11 pro. I've seen this same problem happen to several of my clients as well.

How are you determining the page size in Acrobat? Please post a screenshot. If you have the word scaled up in your filename, you may have to do a view >> pixel aspect ratio >> square
IN acrobat dod a Commadn R to show rulers, is your file 8.5" x 11". This actually sound like a view settings problem in acorn bat, btiu not sure

Disk utility fails to resize portable drive partitions with error message "requested change in size is too small".

I am using a 1TB WD studio passport portable drive with my 2011 MacBook Pro. I have the portable drive partitioned into 4 volumes: 355 GB, 320 GB, 320 GB, & 4 GB. But Disk Utility won't allow me to split the third of those into 160 GB /160 GB. All volumes verify as seeming "to be okay". Seems if Disk Utility could create me a 4GB partition that 160 GB is plenty big enough, right? Something's not right; Can you help me with this please?

What is on those partitions and or the partition you want to split in two?
If you don't have any data on partitions or if you can save it someplace else for the time being then why not just Re-Partition the whole drive into the sizes you now want.

Change Canvas size -settings in FCE 4.0

Pardon me if this has been asked before...
I would like to know if there are other sequence settings or a way to manually configure sequences in FCE. I am an old Final Cut Pro/Studio user. Now I am teaching at a lab that only has FCE 4.0 and I am discovering this limitation.
I teach videoart and use all kind of sources -cellphone video, video from point and shoot cameras, flvs, miniDV, etc. I know how to convert most files to QT, but many of them are 320x240 and would like to work like that in FCE.
Thanks for any suggestions.

FCE does not have the ability to manually configure sequence settings, just to choose from one of the Preset ones. Your best bet is to first convert the video to the settings you will be using in FCE.

Database backup file size is too small compare to actual database size

Hi All,
I know that backup file size can be smaller than actual DB size (i.e., MDF size + LDF size). But in my case i am observing huge difference.
My Database size is 16 GB out of which 10 GB consumed by MDF and 6 GB consumed by LDF. But when i took the backup, the backup file size is only 1 GB!!!!!
I am skeptical about whether i am doing anything wrong. Please advice me.

Olaf is right it must be compressed backup:
To check if the backup file is compressed or not
RESTORE HEADERONLY FROM DISK = 'Path to backup file';
Looks for column labelled "Compressed". 1 = compressed, 0 = not compressed.
If you are skeptical about backup file you can verfiy whether a SQL database backup can be read and restored:
RESTORE VERIFYONLY FROM DISK = 'Path to backup file'
If the backup is valid, the SQL Server Database Engine returns:
The backup set on file 1 is valid

Graph canvas size problem - missing rows

Hi all,
we have a simple horizontal bar graph based on a view, with just one total value pr. company showing.
Problem is, if we set the canvas size too a small value, e.g. 400x400, then instead of resizing bars down so that all rows are shown, the graph starts to omit rows at the end!
Even when enabling "Zoom and Scroll", we're still missing those rows.
Only way to make sure all rows are displayed is to increase canvas size to a large enough value. Problem is, the number of rows is dynamic - so "big enough" might change over time....
Is this a bug in the OBIEE graph component, or are we missing something here?
Regards,
-Haakon-

hi,
can anybody give me a hand.i'm in urgent!
my request is how to display line graph according to the table rows.
for example:in the table,i have 100 records(values),then the table range size is 10,so,each time when i scroll down the table,then graph will oso change to the another 10 records(values).
while,i m adding the graph using jheadstart(10g).
thank you very much.

Changing the size of the bevel photo box in Aperture 3

Does anyone know how I can change the size of the bevel photo box that comes with the Formal-Soft cover-medium theme. Aperture 3 is not allowing me to change the size. I would like to make it larger. I can not add a bevel bevel photo box. I have done the change with Aperture 1 before.
Thanks

See the post at http://photo.rwboyer.com/2010/03/15/aperture-3-book-theme-trick/ for tantalizing hint on how to make this work -- which I'm attempting right now. (If the link gets removed, do an internet search for "aperture 3 book theme trick" (without the quotes) and you'll get it. The "original article" referenced is essential reading -- at least the part on how to make a copy of a theme so one can play with it. Note that Aperture has to be restarted if you create the theme copy while Aperture is running. I've made the suggested change, but it's not taking effect. I'll experiment more and report back, but I thought others might like to know there is a possible solution.

How can I make an imported image smaller without changing the size of the canvas?

After downloading some free icons, I used the drag and drop method to bring the icon of my choosing onto a blank canvas that is 313x188 pixels. The image is larger than I need it to be, so I need to make the image smaller while keeping the canvas size at 313x188 pixels. I've tried several things after googling it, but have not had any luck. Help; I'm still learning! Thanks in advance!

ctrl/cmd-T will bring up transform. Then just drag the handles to size it - hold the shift key to constrain the aspect ratio.

Changing Canvas size to be smaller, is actually making it larger?

Similar Messages

Maybe you are looking for