Changing Capacity Planning view from Week to Day

Hi Gurus,
I have a need to change capacity planing view from week to days Currently while view Capacities in CM01 it is displayed in week. Is there any way in which I can change it to days.
Thanks in Advance.
Amol

Hi Amol,
you can change the capacity planning view from week to days in CM01, just go to settings in CM01
there in general settings in the periods view you can change it from week to days.
Regards,
Naveen.

Similar Messages

Change Calendar month view from six weeks to four weeks

Hi - this may not be be possible, but I thought I'd ask the community.
I prefer working with the Calendar in month view. Mavericks always dispays six weeks in month view, while Mountian Lion would display four, five, or six weeks, depending on the month. On my Macbook Pro 13", the new six week view creates days that are too small to work with.
Is there any hidden preference that could make it display just four weeks at a time, rather than six?
Thanks.
Steve

Thanks for the wild and crazy ideas.
I did remove any events that span midnight and it did not help.
I looked at the DbFixit program. Since it corrects problems in the Palm and not in Palm Desktop I believe it is not relevant. The reason I belive the palm device is not involved is because of the following test:
I removed all previous Palm Desktop versions
I removed all registery entries for both Palm, PalmOne, and the USB (as specified by a chat session with Palm)
I removed all data directories including \Program Files\PalmOne, \Program Files\Palm, and \Palm
I removed all instances of data in the Documents directory
I did a cold boot of the computer
then...
I did a fresh install of Palm Desktop
I typed in a year's worth of data
I did not sync or otherwise connect a palm to the system
I selected month view
The system crashed!
I believe this takes the Palm device completely out of the loop. This problem occurs when typing data in Palm Desktop from the keyboard.
I appreciate any ideas, and will follow up on them.
Thanks again
Jack Cornelius
Since no Palm was involved, the corruption must have occured in the Palm Desktop program itself.
Post relates to: Tungsten E2

Why can I no longer change Global Plan options from the website?

I used to be able to add and remove the $29.99 Global Option (reduced phone minutes and 100MB data) via the web interface, but now it is no longer possible. When I click on "My Global Device & Services", I see "My Global Plan" but when I click on "Change Plan", I am transferred to a page where all I can do is change my OVERALL Verizon plan - no global features!

Thanks for trying to get that plan changed yourself, Zap13. We want to make managing your account easy. On that Change Plan page you described, there should be a tab at the top next to "Chose your plan options" that says "International & Global (Optional)". From there you should be able to make any international plan changes needed.
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Change calendar view from list to week

Hi
I imported company holidays into the calendar of about 40 users. I did it using a pst with the corresponding holidays, and I imported this pst using new-mailboximportrequest.
Now all users reported, that their calendar view has changed the view from week to list. I need to change this view back from list to week, but if possible without user interaction. Is there a possibility?
Regards
Peter

Hi Peter,
In which calendar view did you create the holidays pst?
What if we import the pst from Outlook side, will it still show in the List view?
Meanwhile, please try to create a new holidays pst file and make sure it in the week view before you export it into a pst, and then test the issue again.
Please let me know the result.
A similar problem here:
http://social.technet.microsoft.com/Forums/exchange/fr-FR/2a5596a8-6236-4345-a684-66cf46d0c484/import-calendar-entries-to-exchange-2013-causes-outlook-calendar-view-problems?forum=exchangesvrgeneral
Regards,
Steve Fan
TechNet Community Support

CM01 / capacity planning / generate graphic automatically ?

Hello experts,
we have implemented the capacity planning for our production.
The processes are working fine.
But I've got the following requirement to solve:
Is it possible to generate the graphical views from CM01 every day automatically in background jobs and send them to printers or email-accounts (nice to have)?
Thanks a lot for your answers.
Regards
Markus

Dear,
Yes it is possible to generate the graphical views from CM01go toGraphic--standard overview.
But automatic in background it is not possible.
Hope clear to you.
Regards,
R.Brahmankar

Any std report in Capacity Planning showing only dispatched orders/opns ?

Hi CRP gurus:
Does SAP has any standard report/transaction in Capacity Planning that shows (or has a selection for showing) only "dispatched" orders/opns ?
- Chetan

Chetan,
Use transaction COOIS. In this choose Operations, System status as DSPT at operation level, enter plant and execute. You will get only orders and the operations which are dispatched in this plant.
You can navigate to the capacity planning table from the selected records through order change.
Hope this is ok with you,...reward points..and close.
Regards
Ram

Capacity planning tables.

Hello everyone,
I have a requirement to extract Capacity Planning data from ECC into BW. I see that Capacity Planning report can be generated from CJ2B transaction. I also found that the structure for this is CYSTANDA. For extraction purposes I wanted to find out which tables are used to get this information and how CYSTANDA structure is populated.
Can someone please enlighten me?
Thanks in advance.

Welcome to SCN!
You can determine this very easily yourself by running a performance trace (transaction ST05) against the transaction you are interested in (CJ2B).
Rob

How do you change the pink highlight for the present day in calendar when in week view

How do you change the pink highlight for the present day in calendar when in week view - OSX Maverick

the current day was light blue in ical in 10.6 but with plenty of contrast, but I recently made the bigger leap all the way to calendar in 10.9. the choice of color is terrible for reasons such as Spile1962 puts below, but also not having any way to tweak it is terrible. I'm on a bran d new imac and can barely see a difference and frankly, while I appreciate the subtlety, I still forget to look for the darker bar across the top of the current week and day. we should be able to adjust weekend and current day bg colors.
I went into the app's package contents in hopes that they were using a tiff/png file that I could tweak on my own but couldn't find anything for them. all the icons are there, as are the bg sets for all the little pop-ups and things, but I couldn't even find a reference to a hex color in the plist file.
send apple feedback. I just did myself, except that Calendar hasn't made the list (yet?), only iCal up to version 4.x, and Messages is still only iChat for feedback, and some others are old as well. apparently after steve died, apple's attention to these details just died with him. it's been that long since those other apps should have been relevant on their site.

How can I change the shipping time from 1-2 weeks to 2 days

How can I change the shipping time from 1-2 weeks to 2 days. Thank you in advance.

Right you are, R_Kelly. Thanks, that did the trick. Ukgaurav also pointed out some choices in the Displays and Cursors Preferences with which I fine-tuned the tool cursor appearance.

Changing the default event time to all-day in Month View?

I updated to Mavericks today, and when I went to add an event to my Calendar, I discovered that all-day was not the default time. In Mountain Lion, when going to add an event in Month View, it was automatically set to all-day, which is perfect because all of my events are all-day events. Now, it's being set to 9:00 to 10:00, and I have to check the box to make it all-day. I know that this isn't much work, but when I'm adding dozens of events it starts to get a little annoying.
Calendar 7.0, OS X 10.9 (Mavericks).
Any help would be greatly appreciated.

npatelaz,
I don't think that it is possible, even using Terminal. If you want to change your workflow, "all day" events can easily be created in the Day/Week view, but as you stated the Month view poses a problem.
Calendar Help says:
To make:
An event that lasts all day:
In Day or Week view, double-click in the “All-day” section at the top of the calendar.
An existing event last all day:
In Day, Week, or Month view, double-click the event, click the date, then select “All-day.”
A multiday event:
In Week view, drag from the start time to the end time. You can drag across multiple days.In Day or Month view, create an event. Then, enter the start and end dates and times.
An all-day event into a multiday event:
In Week view, drag the all-day event across multiple days.
How to Change the Default Duration of New iCal Events - The Mac Observer was written over a year ago, but it may give you some other ideas.

Card Images Become "Unopenable" on Notebook After Changing View From "Details" to "Medium Icons"

I've been viewing & placing image files into folders directly from my camera card over the past few days on my new notebook. It was becoming very tedious as I had to view each image seperately to see what it was, before I had the bright idea to try to "VIEW" them differently. In the process of changing the "VIEW" from "DETAILS" to "MEDIUM ICONS", some of the the pictures which had previously been fine the few times I had taken the card in & out of the notebook, became HP Icons instead of the picture's thumbnail. I didn't realize this at first because the pictures were broken up into months (luckily), I was going through them chronilogically, and it wasn't until I got to images from the 26th of that month that I came across this problem. I clicked the HP logo for these images and got the message "SORRY, WE CANNOT OPEN THIS PHOTO". I immediately panicked and closed the folders and took the card out to put back into my camera to see if it showed up on there. Sure enough where those images had been was replaced with a big question mark and the message "Unidentified Image" when I selected it to view. I immediately went through every picture on the camera to see if this had happened to images from other months, but it had not. I had no clue what had caused this as all the images on the card/camera had remained intact the previous times I had put the card in the notebook (I'm constantly viewing images on the camera & usually go through all of them in passing daily). I had no idea what had caused this, and was afraid to put the card back into the notebook. After trying to explain this on some camera forums I needed to know the exact messages I received trying to view those images. Put the card in, took it out, and no more pictures were effected. A day passed and I figured I could work on filing pictures from the other months until I could solve the problem. I went through the camera first, and all the other images were fine. Put the card in and was presented with the "DETAILS" view again, so I changed it from that to "MEDIUM ICONS". MISTAKE. BIG MISTAKE. The same thing happened to several pictures from that file, which I immediately saw, closed the file, and took the card out. The images which had been fine moments before were now question marks on my camera. Genius that I am had to do it twice to figure out what did it. After that I tried changing the view back to "DETAILS", which of course didn't work.Prior to that I didn't think it was the camera, but I wasn't sure if it was the card or the notebook. I've had the camera 3 years, no problem. I've had the card 6 months, no problem. I've only had the notebook a few weeks, and had only started using the card reader a few days before this happened. Any help would be greatly appreciated as most of the pictures effected were irreplacable Christmas pictures.
Just in case it helps my camera is a Canon PowerShot SX150 IS and the card is Wintec filemate Professional Plus 64GB.

Thank you for responding,
I have tried copying the affected images after they began to display the problem, but they opened (or rather didn't) the same as before I copied them.
I was using the default program to view the pictures, HP Connected Photo. However after this occurred I attempted to view them with Windows Photo viewer, with the same result.
Unfortunately I do not have an external card (but if i knew it would restore the photos I would definitely get one).
I don't think I have a virus, and the notebook is still so new I have the trial of McAfee running (which, for what it's worth, says "Your computer is secure". My internet service is also protected.
As stated I was copying images from the card for several days (and taking the card out & inserting it back into my camera after each use) with no altered images showing up either on the camera or the notebook. It wasn't until I changed the way I was viewing the files from details to thumbnails (medium icons) that some of the images from that file were affected. (The pictures had automatically been seperated into files by month, so there were 6 files. Only the file with the thumbnails I switched how I was viewing had altered images. The other 5 files remained fine, until I did the same with November's file, at which time some of those images became unviewable as well).

SNP Planning Book Capacity Data View Issue

Hi Friends,
In my SNP Planing Books Capcity Data View the total of Production Qty is not matching when I expand the Product wise view for Week 22 2011. Can some one help me to identify why this is happening?
Production Total Qty shown is 29618 but when I view Product Details it totals only 24650 but Total line shows 29618.

Hi,
In the standard SNP planning area 9ASNP02, the relevant KF in Capacity view is 9ACASUP .
There may be a conflict identified between selection and key figures to be read.
You can choose a different selection condition or change to a different data view, and check if ti comes out correctly.
Regards
Datta

My Month view says July, but my Week and Day views say January

There appears to be a glitch in my iCal. Thanks to these discussions, I finally got it to accept 24 hour clock input (though it still displays times as 12 clock until I go in to check), but I am flummoxed by the fact that only in the Month view do I see the correct month. In Week and Day views it is always January. How can I correct the Week and Day views? By the way, I can't believe I am the only one to write about this. I searched but couldn't find any similar questions.

racjstevens,
Welcome to Apple Discussions.
Try changing your default paper size in System Preferences...>Print & Fax>Printing.
Is there any reason that you are still using 10.4.1? The current system is 10.4.10.
Also check this search for other suggestions.
;~)

Ical displays Wednesday every day in Week and day view

Upgraded to SnowLeopard and added "calendar.app" from the app store, evr since ical displays "Wednesday" everyday in week and day views. Any ideas?

Replying to myself as this may help others!
The problem was in system preferences. It was set to custom!!

Create view from multiple days tables

Hi,
I'm having existing oracle db with daily stat data, tables strangely named data_mon, data_tue, data_wed.. For my batch processing I plan to use view with multiple day data, let say for last 5 days.
Not sure how better implement my sql statement, with those _mon suffixes to make it more or less dynamic.
I also never create View from multiple tables, so probably I can do something that will add fresh daily data and delete 5 days old data?
Will appreciate you comments on details and whole concept. I have prev sql server experience.
Thanks
T

user12943718 wrote:
Hi,
I'm having existing oracle db with daily stat data, tables strangely named data_mon, data_tue, data_wed.. For my batch processing I plan to use view with multiple day data, let say for last 5 days.
Not sure how better implement my sql statement, with those _mon suffixes to make it more or less dynamic.
I also never create View from multiple tables, so probably I can do something that will add fresh daily data and delete 5 days old data?
Will appreciate you comments on details and whole concept. I have prev sql server experience.
Thanks
TChange the data model so you don't have 1 table for a day.
You just have a DATA table, and a column to denote the day of applicability.
Then you don't need a view, don't need anything dynamic, don't need to smash your head against a wall for a simple query ... etc.

Changing Capacity Planning view from Week to Day

Similar Messages

Maybe you are looking for