Changing cell borders in tables in Buzzword

I am considering using Buzzword with my clients but I need to import documents with tables. The tables in my Word documents (containing case headings in legal cases) do not have borders. When I import them into buzzword, all of the cells have black borders. Unacceptable. Is there a feature where you can set the borders on tables? If not Adobe very much needs to include it. Thanks.

Hello,
Although the borders appear upon the initial import, you should be able to remove them. Put the insertion point anywhere in the table, select the Tables tab, and then choose the None option from the the Gridlines Color control:
Hope this helps!
Michelle

Similar Messages

Problems with vertical cell borders and the default table style

When laying out tables in Word, I like to use thin horizontal lines (cell borders) and thick-ish white vertical lines. The vertical white cell borders create a subtle negative space that is less cluttered than the typical boxed-in-all-sides style.
Issue 1.
In Pages, horizontal cell borders seem to take precedence over vertical cell borders so my vertical white line trick doesn't work. Is there a way to force my vertical white cell borders to "show up" over my think black horizontal cell borders?
Issue 2.
So, for the time being, I'm not using vertical white cell borders in tables; instead, I set the vertical cell borders to "none." Unfortunately, when I try to set the default table style using a table with no vertical cell borders, Pages adds the vertical cell borders anyway. Does anyone know a way to get Pages to surrender?
Message was edited by: Steve in Seattle

I must apologizes.
It seems that I didn't understand well the problem.
Issue 1.
In Pages, horizontal cell borders seem to take precedence over vertical cell borders so my vertical white line trick doesn't work. Is there a way to force my vertical white cell borders to "show up" over my think black horizontal cell borders?
NO
Issue 2.
So, for the time being, I'm not using vertical white cell borders in tables; instead, I set the vertical cell borders to "none." Unfortunately, when I try to set the default table style using a table with no vertical cell borders, Pages adds the vertical cell borders anyway. Does anyone know a way to get Pages to surrender?
I checked and here, aftere defining a new default format with vertical lines set to none, this format is used when I cvreate a new table.
But the same with horizontal lines doesn't apply.
_Go to "Provide Pages Feedback" in the "Pages" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'10
Yvan KOENIG (from FRANCE mardi 28 avril 2009 22:31:45)

Cell borders not expanding using nested subforms

I have an existing form whose table was created using subforms (not a table object). I found this post which addresses my issue: Cell Borders in tables of adobe form. However, I'm still having an issue and I'm hoping someone can point me in the right direction.
The subform 'ITEM' contains 12 columns. I wrapped column 12 into a subform and named it Subform12. I then wrapped column 11 and Subform12 into a subform and called it Subform11. I continued to do this for the remaining 10 columns. I removed the borders for each individual column and instead set the border for each SubformXX. I also selected 'Auto-Fit' for the height for each SubformXX. The sixth column is the column that can contain multiple lines of text. After doing this the first 6 columns expand correctly, however, the last 6 do not.
Can someone please tell me what I'm missing?
Thanks!
Julie

Hi Julie,
Can't you just do the following:
For the first cell (the one with the large amount of text), you but on the right border
You take this cell together with the next one and put it into a flowed subform with the right border
Then you take this subform together with the next one:
Repeat number 3:
Kind regards,
Niels De Greef

How do you change/adjust border width for all the cells in a table created in Pages?

How do you change/adjust border width for all the cells in a table created in Pages?
Note- I am trying to figure out how to create and format tables in the latest version of the Pages app on an iPad air (iOS 8.1.1.1) . Creating tables, adding or removing borders for individual/all cells in a table seems straight forward. However the default border style seems to be a heavy black line. How do I change this?
I found the option add or remove borders for all/ individual cells in a table, however I can't find any option within style/format dialogue screens for changing colour or line thickness for table cells. Likewise I can't find any clear instructions on how to do this in apple help pages or support website
Btw- I'm assuming it is possible to customize/adjust the colour & thickness of selected lines in a table created in this app (it's fairly easy to do this word processing apps like MS Word) please let me know if this is not actually possible in Pages

They know perfectly well what they took out of Pages '09.
Well over 90 features.
Do you think you posting feedback is going to remind them of what they did?
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5 and rate/review it in the App Store, then get back to work.
Peter

How to change the same cell in multiple tables at the same time

help if you can,
i have a workbook
workbook has 10 sheets
each sheet has 1 table
when in excel you were able to select a sheet then hold control and select another, this would group the sheet as if to make them the same. change a single cell in one of the sheets and this changed cell would be also be changed in all grouped sheets. is there the same functionality in numbers?

It's funny.
This question was asked several times in the last ten days.
The feature is unavailable.
_Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'10
Yvan KOENIG (VALLAURIS, France) jeudi 8 octobre 2009 18:57:14

How Do I Change the Padding in Table Cells

Hi, I am trying to set up a table that will allow text to fill the entire cell. I know that if I double click an individual cell, the left and right boundaries of the cell will be displayed on the ruler. However, I can't select multiple cells (even in a column) to adjust the boundaries. By default, all cells are created with no padding on the left, but half an inch on the right. I want no padding on the right as well. I know I can change the the tab for the table with the text inspector, after the fact.
So, #1. How can I change the default right cell wrap for all cells in a table?
Additionally, I know how to get rid of the padding above the text (via text property "instant margins"), but I also need to eliminate the padding at the bottom of the text. When I adjust the instant margin, it just moves the text the upper-left corner of the cell, but does not change the vertical size of the cell. I can change the individual row height by grabbing the border and dragging it up, but, again, this is a pain for large table. I know I can also change the overall cell height by dragging the lower table boundary.
#2. How do I change the default cell height so the cell is tight against the text, regardless of the font size, for all cells in a table?
Any help or suggestion will be greatly appreciated.
Thanks
Gary

Thanks for the reply.
Unfortunately, those options will not do what I need.
If I turn off "Wrap text", the text overflows the cell and the text in the adjacent cell to the right will hidden. I still want the text to wrap, just not half an inch from the right border.
And the "Resize to fit" changes the cell width, which I want to keep the cell at a static width.
One workaround I found, was to modify the table as needed, using text properties, and then save the table as the table default. Unfortunately, that overwrites the factory default, and new table's tabs in other templates (all other properties seem to be retained)
The second option that seems to work, is to save my entire document as a template. That seems to hold all the properties for graphics, tables, etc.
A bit kludgy, but those methods seem to do the trick.
Now, how do I get the default table properties back?
Gary

How to remove table cell borders

Hi,
I’m using dreamweaver cs6.first i create a HTML page then i create a div tag (800w 900 h) & create a table inside of above div. i want to keep table border & make it to tickness, want to remove cell borders. I can’t find any options to remove the cell borders. Please any one can help me.
Thank you.

table.borderless {
border-width: 0px;
background-color: white;
font-family: Verdana, Arial, Helvetica, sans-serif;
font-weight: bold;
font-size: 1.2em;
text-align: center;
text-transform: none;
table.borderless th {
    border-width: 0px;
    padding: 5px;
    background-color: white;
table.borderless td {
    border-width: 0px;
    padding: 5px;
    background-color: white;
<table width="250" height="150" align="center" class="borderless">
<tr>
<th colspan="2" class="style1">Borderless table<br />
   cell 1 & 2 merged</span> </th>
</tr>
<tr>
<th class="borderless">cell 3 </th>
<td class="borderless">cell 4 </td>
</tr>
<tr>
    <th>cell 5 </th>
    <td>cell 6 </td>
</tr>
</table>

How to turn table cell borders on

No matter what I do, certain cell borders are turned off and they have different thicknesses. I want all borders of all cells in all tables in the page always turned on. I can't see any way to do this in CS6, the border button has disappeared. If it helps the cells can span multiple columns and/or rows. I don't see any difference in the source code for old tables created in a previous version and new tables.

CSS code:
table td {
border: 1px solid #CCC; /**adjust values as desired**/
Nancy O.

Can a link only change one cell in a table?

I've been learning Dreamweaver from a textbook, but I'm still pretty new to it, and I'm not sure what terminology to use here. I want my site to have a link that just changes one cell in a table when you click the link, rather than having it go to a whole new page. For example, you click a link and a picture changes but the rest of the site stays the same. So far, I've been doing this by just making several duplicates of an html file, and then just changing that one cell in each copy. It works, more or less, but then whenever I want to make a change to my page, I have to make the same change in all the copies. There's got to be a better way, right?
If this is too complicated to explain in a forum, perhaps someone could just tell me if there's a term for what I'm trying to do, and then I can just look for it in my book or search for it online.
Thanks for your help. Oh, and the version I'm using is CS5.

What you are asking for is called a 'disjoint rollover', which means 'something happens over here, and the effect is seen over there'. It's simple to do even manually. Take a look at this page -
http://www.murraytestsite.com/locrian.html
The code on the page is this -
<!doctype html>
<html>
<head>
<meta charset="UTF-8">
<title>Untitled Document</title>
</head>
<body>
<p><a href="#" onclick="document.getElementById('image').src='_img/masthead-logo1.jpg'">link</a></p>
<table width="347" border="1">
<tr>
    <td>  </td>
    <td>  </td>
    <td>  </td>
</tr>
<tr>
    <td>  </td>
    <td>  <img src="_img/masthead-logo.jpg" width="347" height="120" alt="" id="image"/></td>
    <td>  </td>
</tr>
<tr>
    <td>  </td>
    <td>  </td>
    <td>  </td>
</tr>
</table>
</body>
</html>
I used a table because you specifically asked about tables, but I wouldn't recommend using them for anything other than tabular data, and certainly not for general layout. The code could be re-written like this to completely eliminate the table -
<!doctype html>
<html>
<head>
<meta charset="UTF-8">
<title>Untitled Document</title>
</head>
<body>
<p><a href="#" onclick="document.getElementById('image').src='_img/masthead-logo1.jpg'">link</a></p>
<div><p><img src="_img/masthead-logo.jpg" width="347" height="120" alt="" id="image"/></p></div>
</body>
</html>
Better, huh?

TableModelEvent is always the same - one cell or entire table changed

Why does JUTableModel fire always the same event, if you change a single cell, or entire table structure changes.
Event always looks like this:
first row: 0
last row: 2147483647
type: 0
column: -1
source class: oracle.jbo.uicli.jui.JUTableBinding$JUTableModel
I need to distinguish between a single cell change and entire table structure change.

Thanks for getting back at this.
Unfortunately I get a 0, when I try to reproduce your solution. Of course, I am using the German version, but it should be the right formula.
When I leave out the $-signs in the search array I get a 0. See second picture.
Am I doing it wrong?
Lukas

How do I remove unwanted table/ cell borders in firefox

I just built my website in dreamweaver. When I preview it, it
looks fine in both firefox & safari. However when i post and
view my site online, i see unwanted cel borders in firefox...I've
already checked the code and the border is set to 0 - any help is
much appreciated
thanks! Maura

Hi Maura,
Nice site and great art!
I see the borders in firefox but not in internet explorer.
I'm no expert on this, but have you tried altering the cell
padding and cell spacing value - for example, both to zero? Does
this help?

Table and cell borders

I'm using CS4. I set up a table style in my style sheet that
calls for a 2 px wide orange border. The border only outlines the
entire table but not the individual cells. Does anyone know how I
can fix that in the style sheet?
The URL is
http://www.virginiacpac.org/pages/conference.html
Thanks,

Sure,
Your table has a class of table_border, so your CSS is saying
give the table
a border that's 2px solid and orange:
.table_border {
border: 2px solid #E2832F;
padding: 2px;
That results in a border around the table only.
You wanted to give the cells in the table the border, so this
CSS...
.table_border td {
border: 2px solid #E2832F;
padding: 2px;
...says to give every cell (td) that is inside an element
with the class of
table_border (your table) an orange border.
Now, because each cell has a border of 2px, adjacent cells
appear to have a
4px border.
Applying border-collapse:collapse to the table takes care of
this.
.table_border {
border-collapse:collapse;
http://www.w3schools.com/Css/pr_tab_border-collapse.asp
Take care,
Tim
"dlipscombe" <[email protected]> wrote in
message
news:giephl$hll$[email protected]..
> That did it. Can you tell me why?
>
>

Website shows all the cells borders on ipad. Please help!

Hi Guys,
I am a new member.
I just realized that only on ipads and iphones, my website www.carmenguedez.com shows all the cell borders. Every page has a table defined in HTML/CSS and the borders are hidden in all browsers viewed from PC's. How can I fix it?
My husband and I created my website from scratch using dreamweaver and reading online tutorials, etc. We are not experts in web development and I couldn't find an answer online.
How can I hide these cells borders?
Please help!
Thank you,
Carmen

I found the solution to my problem. I just nedded to add the bg color to my table:
<table width="831" align="center" cellpadding="0" cellspacing="0" class="Table_Border">
I changed to: <table width="831" align="center" cellpadding="0" cellspacing="0" class="Table_Border" bgcolor="#35281c">
Now, the table borders don't show on ipads.
Thanks.
Carmen

Using a button and a textfield in the same cell of a table

I have been struggling with this problem for ages, please someone help...
I am trying to implement a table similar to NetBeans property sheet editor where you have a textfield and a button with "..." in the same table cell. The button is used to invoke a custom editor.
I have most things working, custom renderers, custom editors and such.
However, the focus interactions on the table seem completely screwed. Clicking in the editor causes the cell to switch to editing mode as expected. Pressing cursor down or tab, which should close the editor and move focus to the next cell down does not work - the editor closes but the focus disappears to a completely different component elsewhere on my GUI.
My textfield and button are on a JPanel, and I return that JPanel when getTableCellEditorComponent is called.
If I switch out the JPanel and instead return the textfield, the focus works as normal.
I've even looked at the NetBeans source but I can't work out what their trick is.
Any tips would be gratefully received.
TIA.

Thanks for your time, Jeanette...
Here is a bare-bones example of the problem I'm having. I'm running on JDK1.4 and JDK1.3.1_02.
I've tried some tricks (hacks) with getNextFocusableComponent and requestDefautFocus and such but with no success.
import java.awt.*;
import javax.swing.*;
import javax.swing.table.*;
* This example shows a keyboard/focus navigation problem when using a JPanel
* as a table cell editor. The JPanel contains a textfield and a button.
* Click in the editor to invoke it, and tab-off (or press cursor down). The
* edit ends, but the focus disappears rather than moving to the next cell in
* the table.
* Change the line that returns the panel to return a text field instead, and
* all is well.
public class Test
public static void main( String[] args )
    new Test();
public Test()
    JFrame f = new JFrame();
    f.setContentPane( new TablePanel() );
    f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
    f.setSize( 800, 600 );
    f.setVisible( true );
class TablePanel extends JPanel
    TablePanel()
      setLayout( new BorderLayout() );
      JTable table = new JTable();
      table.setDefaultEditor( Object.class, new MyEditor() );
      table.setModel(
        new DefaultTableModel(
          new Object[][]
            {null, null},
            {null, null},
            {null, null},
            {null, null}
          new String[] { "A", "B" } ) );
      add( table, BorderLayout.CENTER );
class MyEditor extends AbstractCellEditor implements TableCellEditor
    private JComponent myEditorPanel;
    private JTextField myTextField;
    MyEditor()
      myEditorPanel = new MyEditorPanel();
      myTextField = new JTextField();
    public Object getCellEditorValue()
      return null;
    public Component getTableCellEditorComponent( JTable table, Object value,
                                                  boolean isSelected,
                                                  int row, int column )
      return myEditorPanel;   // Problems...
//      return myTextField;   // Keyboard and focus as expected
class MyEditorPanel extends JPanel
    JTextField tf;
    MyEditorPanel()
      setLayout( new BorderLayout() );
      tf = new JTextField();
      add( tf, BorderLayout.CENTER );
      add( new JButton( "edit" ), BorderLayout.EAST );

How can I create an internal space from the border in every cell in a table?

How can I create an space between the text contents and the border inside in every cell in a table in Pages?

Change the Inset margin in the Inspector palette > T tab > Text

Changing cell borders in tables in Buzzword

Similar Messages

Maybe you are looking for