Changing certificate
New to dealing with certs here (and relatively new to iFolder), so please be gentle.
After installing iFolder, we got certificate errors in IE and when installing the client, which is not unexpected. I didn't do significant testing then (before I started fiddling with certificates in iManager), but here's the current state:
- Using Organizational CA
- With Org CA added as trusted root in IE, I can access web access/admin via the server's FQDN without error.
- Accessing via hostname or IP draws the cert errors.
- Haven't tested a client install recently, but early on we would get a similar (ignorable) error when installing.
I've generated a cert which I think will work for all cases... trouble is, I don't know how to get iFolder to start using that cert instead of the current one. Where should I start?
dmurphy,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/
Similar Messages
-
Connection failure after changing certificate
Hi!
I have recently renewed Our certificate on the RD web server. The error is:
The computer can not connect to the remote computer because an error occurred on the remote computer you want to Connect.
I have changed back to the old certificate but that does not solve it.
Clues anyone?
Pittbullshutdown the xraid, remove power cables an batteries.
After a few minutes, reconect all. -
Change certificates in Exchange servers
Hello,
I have two Exchange 2007 servers (one with CAS/HUB, one with Mailbox) and I would like to set new certificates.
I work a lot with Exchange 2013 but little with 2007, so I have two questions :
On my Mailbox server, I haven't certificate. I only have one certificate on the CAS/HUB server. This is the functioning of Exchange 2007 ? I don't understand how the mailbox can "talk" with the CAS/HUB in an encrypted way without certificate.
When I will change the certificate on all my services (IIS, SMTP, ...) the clients will have problems with opened Outlook/OWA (certificate errors, reopen Outlook) or it will be transparent ?
ThanksHi,
Please check my comments below:
On my Mailbox server, I haven't certificate. I only have one certificate on the CAS/HUB server. This is the functioning of Exchange 2007 ? I don't understand how the mailbox can "talk" with the CAS/HUB in an encrypted way without certificate.
You need a cert on CAS role and on HUB. As far as internal communication is concerned, its internal algorithm of exchange, you need to explore that on TechNet.
When I will change the certificate on all my services (IIS, SMTP, ...) the clients will have problems with opened Outlook/OWA (certificate errors, reopen Outlook) or it will be transparent?
It will be transparent in most cases and client will not see any inconvenience.
I hope, this helps you.
Regards,
MachPanel - Premium Cloud Automation Solution -
IPhone SDK: change certificate and/or provisionning of existing app
Hi,
We recently moved from individual to corporation and I was wondering if we can revoke our dist certificate to create a new one, and at the same time, create new provisionning profiles for our apps?
I'm not sure but for updating apps, don't the provisionning profile needs to remain the same?
Thanks!I would make sure that you did not set this app id in XCode. On the Developer Portal --> App IDs --> Manage tab it says:
"You are not required to enter your App ID into your Xcode project. Xcode will incorporate the App ID automatically."
I think you need a * at the end of your app id as well in the App ID configuration in the Developer Portal. You should have something like: 9AK2T6Z3YE.com.somecompanyorname.*
I believe you would enter in "com.somecompanyorname.*" in the second input box when creating an app id. -
How can I change to a different SSL certificate without restarting FF?
I work in a helpdesk environment and my team requires the use of two different SSL certificates for one particular website depending on what we are doing. I can only find the following two ways to do this:
1. Restart Firefox - this is really unproductive due to the nature of our work we have a lot of things open and in use in different tabs/windows and restarting firefox makes us lose information/progress (it's not the kind of stuff that re-opening the tabs automatically will fix).
2. Wait 20 minutes after the last use of the certificate for it to time out and then Firefox will ask us to choose the certificate next time we try to access the page - obviously this is a pretty asinine solution and won't really work. (:
I'm just wondering if there is some way to force Firefox to change certificates or forget the one that is currently in use for the site?Thanks for the suggestion, I should've mentioned I'd already tried that without success. I tried clearing everything in the Clear Recent History section actually but the certificate is still remembered.
I've also just now tried deleting the certificates completely but not even that works - a little concerning. (: -
Changing SQL Certificates and/or Symmetric Keys
Re: Changing SQL Certificates and/or Symmetric Keys
We need to encrypt some sensitive data and are looking at SQL Column Level encryption, using symetric keys.
For example, we are following this example
http://www.mssqltips.com/sqlservertip/2431/sql-server-column-level-encryption-example-using-symmetric-keys/
We are told that we might be required to change certificates and/or keys on a schedule, say every 1 year. How how do you change certificates and/or keys and what is the ramification for the data that is encrypted using them - say EncryptedColumn1?
-- Create self signed certificate
USE encrypt_test;
GO
CREATE CERTIFICATE Certificate1
WITH SUBJECT = 'Protect Data';
GO
-- Create symmetric Key
USE encrypt_test;
GO
CREATE SYMMETRIC KEY SymmetricKey1
WITH ALGORITHM = AES_128
ENCRYPTION BY CERTIFICATE Certificate1;
GO
-- Populating encrypted data into new column
USE encrypt_test;
GO
-- Opens the symmetric key for use
OPEN SYMMETRIC KEY SymmetricKey1
DECRYPTION BY CERTIFICATE Certificate1;
GO
UPDATE Customer_data
SET Credit_card_number_encrypt = EncryptByKey (Key_GUID('SymmetricKey1'),Credit_card_number)
FROM dbo.Customer_data;
GO
-- Closes the symmetric key
CLOSE SYMMETRIC KEY SymmetricKey1;
GOI think you are saying that to recycle the certificate (Certificate1) in my example to use anALTER SYMMETRIC KEY DROP ENCRYPTION then ALTER SYMMETRIC KEY ADD ENCRYPTION and my column data will still be encrypted with the same key but built upon a different
certificate.
Yup.
what happens when i need to recycle the key?
Then it gets messy. You will need to descrypt and reencrypt with the new key.
I'm not well versed in the requirements for which keys to recycle, but I note that in SQL Server, certificates has an expiration date. Symmetric keys have not. Also, certificates can be imported and be signed by a trusted provider. Symmetric keys are
some random bits created in SQL Server. (With the exception of keys från EKM devices, which is a rare thing.)
Erland Sommarskog, SQL Server MVP, [email protected] -
How to migrate certificate for a native installer
Hello,
We have a native AIR app that uses some native files, so it needs to be packaged using "adt -package -target native [files...]" command and cannot be created as an AIRI file.
We include the SWF file, the app description XML and the required native files into the installer, and we also include our code signing certificate into this command line, and everything worked great.
Recently our code signing certificate expired, and we released an update with a new certificate.
However on the machines where our application had been installed previously, installation fails with the following error.
The certificate of the installed app fails to match either the signature or migration signature of the AIR file
It turns out that AIR framework expects a migration signature for applications that had been installed before and changed certificate.
The problem is that "adt -migrate" command expects an .AIR file, and fails to migrate a native installer (such as .EXE or .APP).
How should we migrate a native installer? is there any option in adt to do this?
Thank you in advance,
AnatolyI know this is an older post, but it helped me find out how to make the migration procedure for native installer. I tried it with self signed certificate created by ADT tool and everything went fine.
But now, we obtained a commercial AIR signing certificate from Thawte and the process failes in step 3) ADT saying
'Certificate in PATH_TO_P12 could not be used to sign setup.msi' on Windows.
On mac, it says that signing native installer on OSX is not supported, so I skipped the signing option in step 3) and it worked fine.
I can skip the signing option on Windows as well and the process succeeds, but running the installer on machines with previous versions of application results in "Installer mis-configured' error message - the same error as if the migration process was not applied.
I already contacted Thawte if it is a certificate issue, reply from them was 'AIR certificate can only sign .air applications'. But when I build a native application directly from FlashBuilder and sign it with the Thawte certificate the whole process seem to succeed. The application can be installed on machines without previous version of the application. Those who already have the older version get the 'Installer mis-configured' error message.
I want to mark out again, that the same process but with a self signed certificate created with ADT, is successfull and the application can be installer as an update on machines with older version of the app. So I assume the workflow is correct.
Any ideas? Or somebody having the same issue?
Thanks -
Code-signing Certificate Renew issue
We recently renewed our Verisign code-signing certificate, only to discover that it breaks the auto-update process with the notorious error "This application cannot be installed because this installer has been mis-configured." We were able to make it work by using the ADT -migrate command. That is all well and wonderful. But there are two issues I see. First, there is a 180 day cut-off, beyond which users can no longer be updated. Then, when our certificate gets renewed again next year we might be stuck in a situation where we have to choose which users get to be updated and which are orphaned and are forced to uninstall/re-install.
Furthermore, how much of this pain we have to live with becomes a function of how long a certificate we are willing to pay for. If we're a small company forking out the money for a 3 year certificate might be kind of painful. Why should this be a factor? Why is it not straight-forward to renew the same certificate and have installations back to the beginning of time be alright with it?
It could be there is something about the renewal process that is not right. However, when I renewed my Verisign cert their process pretty much forced me to keep everything about the renewed cert the same as the original, otherwise it would not be a 'renewal'.
If there is an arcane trick we are missing I would be most appreciate to know what it is. This should not be this difficult.
Thanks
KevinHi Kevin,
I've asked around and learned that the process as you describe is "as designed". However, there are stratigies for minimizing the downsides.
For more information, please see the following documents:
AIR 2.6 Extended Migration Signature Grace Periods
Update Strategies for Changing Certificates
Update Your Applications Regularly
Code Singing in Adobe AIR
Hope this helps,
Chris -
It seems I can use ADT to self-sign a certificate "...whose validity period ends after 22 October 2033...", as required by Android market. What are the implications of self-signing an app and posting it to the market? What warnings does the user see? Must I always use that certificate to update the app (ex: I'd change certificates to the "real" one once obtained)? Thanks
So it seems impossible to "buy" a certificate that lasts 25 years. Self-signing it is, then!
-
Generating Self Signed Certificate for iPlanet Directory Server for testing
Hi Experts,
I am unable to find how to generate self signed certificate for iPlanet Directory Server for testing purpose. Actually what i mean is i want to connect to the iPlanet LDAP Server with LDAPS:// rather than LDAP:// for Secured LDAP Authentication. For this purpose How to create a Dummy Certificate to enable iPlanet Directory Server SSL. I searched in google but no help. Please provide me the solution how to test it.
Thanks in Advance,
KalyanHere's one I did earlier.
Refers to Solaris 10
SSL Security
add a new certificate that lasts for ten years (120 months).
stop the instance:
dsadm stop <instance>
Remove DS from smf control:
dsadm disable-service <instance>
Change Certificate Database Password:
dsadm set-flags <instance> cert-pwd-prompt=on
Choose the new certificate database password:
Confirm the new certificate database password:
Certificate database password successfully updated.
Restart the instance from the dscc:
DSCC -> start <instance>
Now add a new Certificate which lasts for ten years (120 months; -v 120):
`cd <instance_path>`
`certutil -S -d . -P slapd- -s "CN=<FQDN_server_name>" �n testcert �v 120 -t T,, -x`
Enter Password or Pin for "NSS Certificate DB":
Stop the Instance.
On the DSCC Security -> Certificates tab:
select option to "Do not Prompt for Password"
Restart the instance.
On the Security -> General tab, select the new certificate to use for ssl encryption
Restart the instance
Stop the instance
Put DS back into smf control:
dsadm enable-service <instance>
Check the smf:
svcs -a | grep ds
# svcs -a|grep ds
disabled Aug_16 svc:/application/sun/ds:default
online Aug_16 svc:/application/sun/ds:ds--var-opt-SUNWdsee-dscc6-dcc-ads
online 17:04:28 svc:/application/sun/ds:ds--var-opt-SUNWdsee-dsins1 -
Roundcube Test Imap config failed
Been trying for hours to get webmail working, following ArchWiki.
Step 3 of Roundcube Installer errors out:
IMAP connect: NOT OK(Login failed for [email protected] from xxx.44.40.194. Could not connect to ssl://localhost:993: Unknown reason)
/var/log/mail:
May 24 09:20:22 server dovecot[13280]: imap-login: Disconnected (disconnected before auth was ready, waited 0 secs): user=<>, rip=::1, lip=::1, TLS handshaking: SSL_accept() failed: error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca: SSL alert number 48, session=<ryUjZ9AW1QAAAAAAAAAAAAAAAAAAAAAB>
Had exact same issue with SMTP test, but changed certificate from FQDN to localhost as work-around and added following to /etc/webapps/roundcubemail/config/config.inc.php:
$config['smtp_conn_options'] = array(
'ssl' => array(
'verify_peer' => false,
'verfify_peer_name' => false,
After this, smtp test succeeded. Tried the same for imap (imap_conn_options), but no success. Dovecot is configured to use the same certs as smtp
Configs:
[tkh@domain ~]$ cat /etc/postfix/main.cf | egrep -v "(^#.*|^$)"
compatibility_level = 2
queue_directory = /var/spool/postfix
command_directory = /usr/bin
daemon_directory = /usr/lib/postfix/bin
data_directory = /var/lib/postfix
mail_owner = postfix
myhostname = domain.com
mydomain = domain.com
myorigin = $mydomain
mydestination = localhost
unknown_local_recipient_reject_code = 550
mynetworks_style = host
relay_domains = $mydestination
alias_maps = hash:/etc/postfix/aliases
alias_database = $alias_maps
debug_peer_level = 2
debugger_command =
PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
ddd $daemon_directory/$process_name $process_id & sleep 5
sendmail_path = /usr/bin/sendmail
newaliases_path = /usr/bin/newaliases
mailq_path = /usr/bin/mailq
setgid_group = postdrop
html_directory = no
manpage_directory = /usr/share/man
sample_directory = /etc/postfix
readme_directory = /usr/share/doc/postfix
inet_protocols = ipv4
meta_directory = /etc/postfix
shlib_directory = /usr/lib/postfix
virtual_alias_maps = proxy:mysql:/etc/postfix/virtual_alias_maps.cf
virtual_mailbox_domains = proxy:mysql:/etc/postfix/virtual_mailbox_domains.cf
virtual_mailbox_maps = proxy:mysql:/etc/postfix/virtual_mailbox_maps.cf
virtual_mailbox_base = /home/vmail
virtual_mailbox_limit = 512000000
virtual_minimum_uid = 5000
virtual_transport = virtual
virtual_uid_maps = static:5000
virtual_gid_maps = static:5000
local_transport = virtual
local_recipient_maps = $virtual_mailbox_maps
transport_maps = hash:/etc/postfix/transport
smtpd_sasl_auth_enable = yes
smtpd_sasl_type = dovecot
smtpd_sasl_path = /var/run/dovecot/auth-client
smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_relay_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_tls_auth_only = yes
smtpd_tls_cert_file = /etc/ssl/private/server.crt
smtpd_tls_key_file = /etc/ssl/private/server.key
smtpd_sasl_local_domain = $mydomain
broken_sasl_auth_clients = yes
smtpd_tls_loglevel = 1
[tkh@domain ~]$ cat /etc/postfix/master.cf | egrep -v "(^#.*|^$)"
smtp inet n - n - - smtpd
submission inet n - n - - smtpd
-o smtpd_tls_security_level=encrypt
-o smtpd_sasl_auth_enable=yes
pickup unix n - n 60 1 pickup
cleanup unix n - n - 0 cleanup
qmgr unix n - n 300 1 qmgr
tlsmgr unix - - n 1000? 1 tlsmgr
rewrite unix - - n - - trivial-rewrite
bounce unix - - n - 0 bounce
defer unix - - n - 0 bounce
trace unix - - n - 0 bounce
verify unix - - n - 1 verify
flush unix n - n 1000? 0 flush
proxymap unix - - n - - proxymap
proxywrite unix - - n - 1 proxymap
smtp unix - - n - - smtp
relay unix - - n - - smtp
showq unix n - n - - showq
error unix - - n - - error
retry unix - - n - - error
discard unix - - n - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - n - - lmtp
anvil unix - - n - 1 anvil
scache unix - - n - 1 scache
[tkh@domain ~]$ cat /etc/webapps/roundcubemail/config/config.inc.php | egrep -v "(^#.*|^$)"
<?php
/* Local configuration for Roundcube Webmail */
$config['db_dsnw'] = 'mysql://roundcube_user:sqlpass@localhost/roundcube_db';
$config['default_host'] = 'ssl://localhost';
$config['default_port'] = 993;
$config['imap_conn_options'] = array(
'ssl' => array(
'verify_peer' => false,
'verfify_peer_name' => false,
$config['smtp_server'] = 'tls://localhost';
$config['smtp_port'] = 587;
$config['smtp_user'] = '%u';
$config['smtp_pass'] = '%p';
$config['smtp_conn_options'] = array(
'ssl' => array(
'verify_peer' => false,
'verfify_peer_name' => false,
$config['smtp_port'] = 587;
$config['support_url'] = '';
$config['des_key'] = '24char key';
$config['username_domain'] = 'domain.com';
$config['product_name'] = 'domain Clothing - Webmail';
$config['mime_types'] = '/etc/webapps/roundcubemail/mime.types';
$config['plugins'] = array('archive', 'zipdownload');
$config['language'] = 'en_US';
$config['htmleditor'] = 1;
[tkh@domain ~]$ cat /etc/dovecot/dovecot.conf | egrep -v "(^#.*|^$)"
protocols = imap
auth_mechanisms = plain
passdb {
driver = sql
args = /etc/dovecot/dovecot-sql.conf
userdb {
driver = sql
args = /etc/dovecot/dovecot-sql.conf
service auth {
unix_listener auth-client {
group = postfix
mode = 0660
user = postfix
user = root
mail_home = /home/vmail/%d/%u
mail_location = maildir:~
ssl_cert = </etc/ssl/private/server.crt
ssl_key = </etc/ssl/private/server.key
[tkh@domain ~]$
EDIT: I just set it all up on my phone (android with option 'accept all certificates') and I am able to send and receive e-mail, so it seems to be an issue with roundcube.
Last edited by etakeh32 (2015-05-26 01:41:28)If roundcube and the mail server are on the same host, do you really need SSL?
http://trac.roundcube.net/wiki/Howto_Co … orIMAPSMTP -
This question was posted in response to the following article: http://help.adobe.com/en_US/air/build/WS5b3ccc516d4fbf351e63e3d118666ade46-7ff0.html
Hello,
this documentation page at the "Changing certificates" section says:
In some circumstances, you must change the certificate you use to sign updates for your AIR application. Such circumstances include:
1. Renewing the original signing certificate.
2. Upgrading from a self-signed certificate to a certificate issued by a certification authority
3. Changing from a self-signed certificate that is about to expire to another
4. Changing from one commercial certificate to another, for example, when your corporate identity changes
What about "Downgrading from a certificate issued by a certification authority to a self-signed certificate" please ? e.g: the opposite of the second circumstance listed in this part of the documentation.
Considering that we respect the 180 days limit after certificate's expiration date:
Is it possible to move from certificate issued by a trusted CA to a self-signed certificate ?
And then move back from the self-signed certificate to a new certificate issued by the same trusted CA as the old one ?
I ask about this because :
Our application's certificate issued by Thawte has expired for 30 days.
Thawte can't provide us a new certificate before the 180 days limit is reached.
So we consider to move from the expired Thawte certificate to a self-singed one. And then move back from the self-signed certificate to the new Thawte certificate which they will give us in the future.
Since we have a big amount of users, we'd like to be sure that this will work and everybody will be able to update the application without any troubles related to the "old expired Thawte certifcate => self-signed certificate => new Thawte certificate" migration.
Thanks for your help -
can anybody tell hw many QM Tables and T codes are ther in total approx.
and if possible which r imp. one?atleast tables.
thnxDear Sandip,
<b>Important QM Tables</b>
Area Table Description
Master Data QMAT Inspection type - material parameters
Master Data QMHU QM Link Between Inspection Lot and Handling Unit Item
Master Data QMTB Inspection method master record
Master Data QMTT Inspection Method Texts
Master Data QPAC Inspection catalog codes for selected sets
Master Data QPAM Inspection catalog selected sets
Master Data QPMK Inspection characteristic master
Master Data QPMT Master Inspection Characteristics Texts
Master Data QPMZ Assignment table - insp. methods/master insp. characteristic
Master Data TQ01D Authorization groups for QM master data
Master Data TQ01E Text authorization groups for QM master data
Master Data TQ21 Assignment of screens to screen groups
Master Data TQ25 QM:screen sequence for master and inspection characteristics
QM Master Data
Catalog QPCD Inspection catalog codes
Catalog QPCT Code texts
Catalog QPGR Inspection catalog code groups
Catalog QPGT Code group texts
Catalog TQ07 Follow-Up Action for Usage Decision of Inspection Lot
Catalog TQ07A QM: Function Modules for Follow-Up Action
Catalog TQ07T Language-dependent texts for Table TQ07
Catalog TQ15 Inspection catalog type index
Catalog TQ15T Language-dependent texts for table TQ15
Catalog TQ17 Defect classes
Catalog TQ17T Language-dependent texts for table TQ17
Catalog
Sample Determination QDEB Allwd. Relationships: Sampling Procedures/Dynamic Mod. Rules
Sample Determination QDEBT Allowed combinations of procedures/dynamic mod. rules: texts
Sample Determination QDPA Sampling scheme-instructions
Sample Determination QDPK Sampling scheme header
Sample Determination QDPKT Sampling scheme: texts
Sample Determination QDPP Sampling scheme item
Sample Determination QDQL Quality level
Sample Determination
Inspection Char TQ17A Weighting of Char
Inspection Char TQ11 Inspection Qualification
Inspection Char TQ29 Tolerance Keys
Inspection Char T006 Unit of measurement
Inspection Char
Dynamic Modification QDBM Valuation mode
Dynamic Modification QDBMT Valuation Mode: Texts
Dynamic Modification QDDR Dynamic modification rule (header)
Dynamic Modification QDDRT Dynamic modification rule: texts
Dynamic Modification QDEP Allowed inspection severities
Dynamic Modification QDEPT Allowed Inspection Severities: Texts
Dynamic Modification QDFB Function modules for the individual procedure categories
Dynamic Modification QDFBT Function Modules for Procedure: Texts
Dynamic Modification QDFM Function modules for valuation mode
Dynamic Modification QDFMT Function Modules for Valuation Mode: Texts
Dynamic Modification QDPS Inspection stages for a dynamic modification rule
Dynamic Modification QDPST Inspection Stages: Texts
Dynamic Modification QDSA Sampling type
Dynamic Modification QDSAT Sampling Type: Texts
Dynamic Modification QDSV Sampling procedure
Dynamic Modification QDSVT Sampling Procedure: Texts
Dynamic Modification TQ39B QM : Activates reference for dyn. modification level
Dynamic Modification
Graphics & SPC QASH Quality control chart
Graphics & SPC QAST Control chart track
Graphics & SPC QPSH Control chart types
Graphics & SPC QPSHT Texts for control chart types
Graphics & SPC QPSP SPC criterion
Graphics & SPC QPSPT Texts for SPC criteria
Graphics & SPC QPST Control chart track
Graphics & SPC QPSTT Texts for control chart tracks
Graphics & SPC
Specifications QMSP QM: material specification
Specifications
Inspection Plan PLKO Inspection plan Header
Inspection Plan MAPL Material Assignement
Inspection Plan PLPO Operation Details
Inspection Plan PLMK Inspection plan characteristics
Inspection Plan PLMW MAPL-Dependent Charac. Specifications (Inspection Plan)
Inspection Plan TQ03 QSS: Control for Screen Texts/TABLE NOT USED (Rel. 4.6)
Inspection Plan TQ29A Dependency tolerance key - nominal measurement
Inspection Plan TQ72 Type of share calculation
Inspection Plan TQ72T Texts for type of share calculation
Inspection Plan TQ75 QM formula parameters
Inspection Plan TQ75F Field names for QM formulas
Inspection Plan TQ75K Short text for Table TQ75F
Inspection Plan TQ75T Description of formula parameters
Inspection Plan
Qm in procurement QINF QM-info record for material and vendor
Qm in procurement TQ02 QM system definition
Qm in procurement TQ02A QM system assignment and QM system requirements
Qm in procurement TQ02B QM system
Qm in procurement TQ02T QM system description
Qm in procurement TQ02U Description QM system
Qm in procurement TQ04A Functions that can be blocked
Qm in procurement TQ04S QM block functions : texts
Qm in procurement TQ05 QM certificate categories for procurement
Qm in procurement TQ05T QM: text table for certificate types
Qm in procurement TQ08 Control of QM in procurement
Qm in procurement TQ08T QM: text for QM procurement keys
Qm in procurement TQ09 QM: agreement of QM document types
Qm in procurement TQ09T QM: agreement of QM document types
Qm in procurement TQ32A Inspection type to status assignment from status profile
Qm in procurement
QM in SD QVDM QM Info Record - QM Control in SD
QM in SD TQ32B Find insp.type for quality insp. for delivery note
QM in SD
Inspectio lot QALS Inspection lot record
Inspectio lot QALT Partial lot
Inspectio lot T156Q Movement Type: Material-Independent Control
Inspectio lot TQ30 Inspection types
Inspectio lot TQ30T Texts for inspection types
Inspectio lot TQ32 Assignment of inspection type to origin
Inspectio lot TQ32C Lot creation allowed values for the origin
Inspectio lot TQ32C _T Texts for lot creation indicator
Inspectio lot TQ33 Relevant fields for origin
Inspectio lot TQ34 Default values for inspection type
Inspectio lot
Inspection point QAPP Inspection point
Inspection point TQ79 Table with inspection point/user field combinations
Inspection point TQ79T Key words for inspeciton point user fields
Inspection point
Results Recording QAES Sample unit table
Results Recording QAKL Results table for value classes
Results Recording QAMR Characteristic results during inspection processing
Results Recording QAMV Characteristic specifications for inspection processing
Results Recording QASE Results table for the sample unit
Results Recording QASR Sample results for inspection characteristics
Results Recording QASV Sample specifications for inspection processing
Results Recording TQ12 Ind. external numbering for test units in results recording
Results Recording TQ12T Texts for the ind. for ext. numbering of units to be insp.
Results Recording TQ70 Control table for results recording
Results Recording TQ70C Function codes for navigation from the char.overview screen
Results Recording TQ70E Screen-based processing tables
Results Recording TQ70F Navigation during results recording
Results Recording TQ70S Characteristic overview screen for results recording
Results Recording TQ73 Origin of results data
Results Recording TQ73T Texts for origin of results data
Results Recording TQ74 Recording configuration
Results Recording TQ74T Recording configuration
Results Recording TQ76 Processing status of inspection characteristics
Results Recording TQ76T Texts for the processing status of insp. characteristics
Results Recording TQ77 Attributes for the Inspection Characteristic
Results Recording TQ77T Text Tables for Attributes
Results Recording TQ78 Status-dependent processing table for insp. characteristics
Results Recording TQ78T Texts for the status-specific proc. table for insp. char.
Results Recording
Defects recording TQ84 Confirmation profile
Defects recording TQ84T Text table for confirmation profile
Defects recording TQ86 Report category for defects recording
Defects recording TQ86A Assignment report category for work center
Defects recording TQ86T Text table for report category
Defects recording V_T35 2B_F Generated table for view V_T352B_F
Defects recording
Usage decision QAMB QM: Link Between Inspection Lot and Material Document
Usage decision QAVE Inspection processing: Usage decision
Usage decision TQ06 Procedure for Calculating the Quality Score
Usage decision TQ06T Language-specific texts for Table TQ06
Usage decision TQ07M QM: Inventory postings with usage decision
Usage decision
Sample Mgmt QPRN Sample drawing of phys. samples
Sample Mgmt QPRS Master record for phys. samples
Sample Mgmt QPRVK Sample-drawing procedure
Sample Mgmt QPRVK T Header for sample drawing procedure texts
Sample Mgmt QPRVP Sample-drawing items
Sample Mgmt QPRVP T Items for sample drawing procedure texts
Sample Mgmt TQ40 Definition of sample types
Sample Mgmt TQ40T Text table for sample type
Sample Mgmt TQ41 Storage locations for physical samples
Sample Mgmt TQ41T Texts for storage locations
Sample Mgmt TQ42 Physical sample containers
Sample Mgmt TQ42T Texts for phys. sample containers
Sample Mgmt
QMIS S068 Vendor statistics
QMIS S069 Material statistics
QMIS S097 QM notifications: Matl anal.
QMIS S098 QM notification: Vendor anal.
QMIS S099 QM notifications: Cust. anal.
QMIS S100 Problems: Material analysis
QMIS S102 Problems: Vendor analysis
QMIS S103 Problems: Customer analysis
QMIS S104 Customer statistics
QMIS S161 Inspection results: General
QMIS S162 Quantitative insp. results
QMIS S163 Quant. Insp. Result: Vendor
QMIS S164 Quant. Insp. Result: Vendor
QMIS S165 Inspection result: gen. custs
QMIS S166 Insp. Results: Quant. Customer
QMIS TQ55 Assign inspection lot origin for update group
QMIS TQ56 Definition of quality score classes
QMIS TQ56T Text table for the definition of quality score classes
QMIS TQ57 Assignment of quality score key to info structure
QMIS
Quality Certificates QCPR QM quality certificates in procurement
Quality Certificates I000 Conditions for certificate profile
Quality Certificates KONDI Conditions: Data part for certificates
Quality Certificates QCVK Certificate profile header
Quality Certificates QCVM Certificate profile characteristic level
Quality Certificates QCVMT Certificate profile characteristic level: texts
Quality Certificates QCVV Certificate Profile: List of Preliminary Products
Quality Certificates TQ61 Result value origin for certificates
Quality Certificates TQ61T Origin of result values for certificates: texts
Quality Certificates TQ62 Output strategy for skip characteristics
Quality Certificates TQ62T Output strategy for skip characteristics: texts
Quality Certificates TQ63 Origin of insp. specs for certificates (function modules)
Quality Certificates TQ63T Origin of inspection specifications for certificates: texts
Quality Certificates TQ64 Origin of characteristic short text for certificates
Quality Certificates TQ64T Origin of characteristic short text for certificates: texts
Quality Certificates TQ65 Certificates: Combinations allowed for origins, specs/values
Quality Certificates TQ67 Certificate-Relevant Output Types
Quality Certificates
Quality Notification QMEL Notification header
Quality Notification QMFE Item
Quality Notification QMSM Task
Quality Notification QMMA Activities
Quality Notification T352C Catalog types for each catalog profile
Quality Notification TQ81 Notification Scenario
Quality Notification TQ81V Usage of parts
Quality Notification TQ81V_T Texts for usage of parts
Quality Notification TQ81_T Texts for Notification Scenarios
Quality Notification TQ82 Change of Notification Type
Quality Notification TQ83 Partner Functions for Codes
Quality Notification TQ85 Function table for follow-up functions
Quality Notification TQ85R Rules for Follow-Up Functions
Quality Notification TQ85_T Action box text table
Quality Notification TQ8CO Assignment of reference orders to notification type
Quality Notification
Other Objects MARA Material Number
Other Objects T001W Plant
Other Objects LFA1 Vendor
Other Objects KNA1 Customer
Other Objects AUFK Order Number
Other Objects SAFK Run Schedule Header Number
Other Objects MCH1 Batch Number
Other Objects MCHA Batch Record
Other Objects EKKO Purchasing Document Header
Other Objects EKPO Purchasing document Item
Other Objects EKET Delivery Schedule
Other Objects VBUK Delivery Header
Other Objects VBUP Delivery Item
Other Objects CSKS Cost Center
Other Objects EQUI Equipment Number
<b>Transaction List:</b>
Q000 Quality management
QA00 Quality inspection
QA01 Create Inspection Lot
QA01A Create Inspection Lot
QA02 Change Inspection Lot
QA02A Change Inspection Lot
QA03 Display inspection lot
QA05 Job planning: Periodic inspection
QA06 Job overview: Periodic inspection
QA07 Trigger for recurring inspection
QA07L Deadline Monitoring Log
QA08 Collective Processing of Insp. Setup
QA09 No. range maintenance for insp.lots
QA10 Trigger automatic usage decision
QA10L Log for Automatic Usage Decision
QA11 Record usage decision
QA12 Change usage decision with history
QA13 Display usage decision
QA14 Change UD without history
QA16 Collective UD for accepted lots
QA17 Job planning for auto usage decision
QA18 Job overview for auto usage decision
QA19 Automatic usage decision
QA22 Change inspection point quantities
QA23 Display insp.point quantities
QA32 Change data for inspection lot
QA32WP QA32 -Call from Workplace/MiniApp
QA33 Display data for inspection lot
QA40 Auto. Usage Decision for Production
QA40L Log for Automatic Usage Decision
QA41 Scheduling UD for Production Lots
QA42 Job planning: UD prod. insp.lots
QA51 Scheduling Source Inspections
QA52 Source inspections: Job overview
QAC1 Change insp. lot actual quantity
QAC2 Transfer stock to insp. lot
QAC3 Reset sample
QAER Display archive objects
QAS1 Download Insp. Specs. (Obsolete)
QAS2 Download Basic Data (Obsolete)
QAS3 Upload Results (Obsolete)
QAS4 Upload UD (Obsolete)
QC01 Create certificate profile
QC02 Change certificate profile
QC03 Display certificate profile
QC06 Immediate delete of cert. profiles
QC11 Create cert. profile assignment
QC12 Change cert. profile assignment
QC13 Display cert. profile assignment
QC14 Create cert.prof.assign.w/copy model
QC15 Create cert. profile assignment
QC16 Change cert. profile assignment
QC17 Display cert. profile assignment
QC18 Create cert.prof.assign.w/copy model
QC20 Certificates for Deliveries
QC21 Quality certificate for the insp.lot
QC22 Quality Certificate for Batch
QC31 Archive display: Delivery item
QC32 Archive display: Inspection lot
QC40 Internet Certificate for Delivery
QC40A Internet Certificate for Delivery
QC42 Batch certificate on WWW
QC51 Create certificate in procurement
QC52 Change certificate in procurement
QC53 Display certificate in procurement
QC55 Worklist: Certificates - Procurement
QCC0 QM: Direct Access to IMG
QCC1 Direct Access to IMG: Notification
QCC2 IMG Direct Access: QM Q-Notification
QCC3 IMG Direct Access: QM Q-Inspection
QCC4 IMG Direct Access: QM Q-Planning
QCC5 IMG Direct Selection: QM Bus. Add-In
QCC_STABI Copy Stability Study Customizing
QCC_STABI_NK Copy Stability Study Number Ranges
QCCC QM standard settings complete
QCCF QM standard forms
QCCK QM standard settings: Catalogs
QCCM QM std. settings: Qual. notifs.
QCCN QM standard number ranges
QCCP QM std. settings: Quality planning
QCCS QM sampling schemes
QCCT QM standard texts
QCCU QM standard settings: Environment
QCCW QM std. settings: Quality inspection
QCCY Transport QM tolerance key
QCCZ QM std. settings: Qual. certificates
QCE2 Edit Communication Support
QCE3 Display Communication Support
QCYF QM standard forms (general)
QCYT QM standard texts (general)
QD21 Mark completed notifications
QD22 Archiving Notifications: Archive
QD24 Archiving Notifications: Delete
QD25 Archiving Notifications: Admin.
QD33 Delete quality level
QD34 Delete quality level planning
QD35 Delete job overview for Q-levels
QDA1 Edit sampling type
QDA3 Display sampling type
QDB1 Maintain allowed relationships
QDB3 Display allowed relationships
QDH1 Q-level evaluation: Change data
QDH2 Q-level evaluation: Display data
QDL1 Create quality level
QDL2 Change quality level
QDL3 Display quality level
QDM1 Edit valuation mode
QDM3 Display valuation mode
QDP1 Create sampling scheme
QDP2 Change sampling scheme
QDP3 Display sampling scheme
QDR1 Create dynamic modification rule
QDR2 Change dynamic modification rule
QDR3 Display dynamic modification rule
QDR6 Disp. where-used list-dyn. mod. rule
QDR7 Replace dynamic mod. rule used
QDV1 Create sampling procedure
QDV2 Change sampling procedure
QDV3 Display sampling procedure
QDV6 Uses: Sampling procedures
QDV7 Replace sampling procedure used
QE00 Quality Planning
QE01 Record characteristic results
QE02 Change characteristic results
QE03 Display characteristic results
QE04 Record sample results
QE05 Change sample results
QE06 Display sample results
QE09 Indiv.display of charac.result
QE09WP Call QE09 from Workplace
QE11 Record results for inspection point
QE12 Change results for inspection point
QE13 Display results for inspection point
QE14 Record results for delivery note
QE15 Change results for delivery note
QE16 Display results for delivery note
QE17 Record results for equipment
QE18 Change results for equipment
QE19 Display results for equipment
QE20 Record results for funct. location
QE21 Change results for funct. location
QE22 Display results for funct. location
QE23 Record results for phys. sample
QE24 Change results for phys. sample
QE25 Display results for phys. sample
QE29 No. Range Maint.: Conf. No. for Char
QE51 Results recording worklist
QE51N Results Recording Worklist
QE52 Worklist: Results for phys. sample
QE53 Worklist: Record results for equip.
QE54 Worklist: Results for funct. loctns
QE71 Tabular res. recording for insp. pts
QE72 Tabular Results Rec. for Insp. Lots
QE73 Tabular res. recording for characs.
QEH1 Worklist for Mobile Results Rec.
QEI1 Displaying QM Interfaces Appl. Log
QEI2 Deleting QM Interfaces Appl. Log
QEW01 Results Recording on Web
QEW01V Variant Maint.: Recording on Web
QF01 Record defect data
QF02 Change defect data
QF03 Display defect data
QF11 Record defects for inspection lot
QF21 Record defects for operation
QF31 Record defects for characteristic
QG09 Maint. num. range Q control charts
QGA1 Display quality score time line
QGA2 Display inspection results
QGA3 Print inspection results
QGC1 Qual. control charts for insp. lots
QGC2 Control charts for task list charac.
QGC3 Control charts for master insp. char
QGD1 Test Equipment Usage List
QGD2 Test Equipment Tracking
QGP1 Results history for task list charac
QGP2 Results History for Task List Charac
QI01 Create quality info. - purchasing
QI02 Change qual.information - purchasing
QI03 Display quality info. - purchasing
QI04 Job planning for QM procurement keys
QI05 Mass maintenance QM procurement keys
QI06 QM Releases: Mass maintenance
QI07 Incoming insp. and open pur. orders
QI08 Job overview of QM procurement keys
QISR Internal Service Request
QISR1 Internal Service Request - Forms
QISR_PCR60 vc_scenario for Message type 60(PCR)
QISR_SM29 ISR Customizing: Table Transfer
QISR_SR12_START Suggestion System
QISRSCENARIO Customizing Szenario
QISRTRANSPORT ISR Customizing Transport
QISRW Internal Service Request on the Web
QK01 Assign QM order to material
QK02 Display assigned QM orders
QK03 Maintain specs. for order type
QK04 Create QM order
QK05 Confirmed activities for insp. lot
QL11 Mat: Distribute Inspection Setup-ALE
QL21 Master Inspection Characs (ALE)
QL31 Distribute Inspection Methods (ALE)
QL41 Distribute Code Groups (ALE)
QM00 Quality Notifications
QM01 Create quality notification
QM02 Change quality notification
QM03 Display quality notification
QM10 Change list of quality notifications
QM10WP QM10 - Call from Workplace/MiniApp
QM11 Display List of Qual. Notifications
QM12 Change list of tasks
QM13 Display list of tasks
QM13WP QM13 - Call from Workplace/MiniApp
QM14 Change list of items
QM15 Display list of items
QM16 Change activity list
QM17 Display activity list
QM19 List of Q Notifications, Multi-Level
QM50 Time line display Q notifications
QMW1 Create quality notification (WWW)
QP01 Create
QP02 Change
QP03 Display
QP05 Print inspection plan
QP06 List: Missing/unusable insp. plans
QP07 List: Missing/Unusable GR InspPlans
QP08 Print task lists for material
QP11 Create reference operation set
QP12 Change reference operation set
QP13 Display reference operation set
QP48 Number Ranges for Physical Samples
QP49 Number range for phys. samp. drawing
QP60 Time-related development of plans
QP61 Display change documents insp.plan
QP62 Change documents ref.operation sets
QPIQS8 QM MiniApp Selection Variant
QPIQS9 QM MiniApp Selection Variant
QPNQ Number ranges for inspection plans
QPQA32 QM MiniApp Selection Variant
QPQGC1 QM MiniApp Selection Variant
QPQM10 QM MiniApp Selection Variant
QPQM13 QM MiniApp Selection Variant
QPR1 Create physical sample
QPR2 Change physical sample
QPR3 Display physical sample
QPR4 Confirm physical sample drawing
QPR5 Manual inspection lots for physSamps
QPR6 Create new phys.-samp. drawing w.ref
QPR7 Storage Data Maintenance
QPV2 Maintain sample drawing procedure
QPV3 Display sample drawing procedure
QS21 Create master insp. characteristic
QS22 Create master insp. charac. version
QS23 Change master insp. charac. version
QS24 Display master insp. charac. version
QS25 Delete master insp. charac. version
QS26 Display characteristic use
QS27 Replace master insp. characteristic
QS28 Display insp. charac. list
QS29 Maintain characteristic number range
QS31 Create inspection method
QS32 Create inspection method version
QS33 Change inspection method version
QS34 Display inspection method version
QS35 Delete inspection method version
QS36 Display inspection method use
QS37 Central replacement of methods
QS38 Display inspection method list
QS39 Maintain method number range
QS41 Maintain catalog
QS42 Display catalog
QS43 Maintain catalog
QS44 Maintain catalog
QS45 Display catalog
QS46 Display code group use
QS47 Central replacement of code groups
QS48 Usage indicator - code groups
QS49 Display code groups and codes
QS4A Display catalog
QS51 Edit Selected Sets
QS52 Display selected set index
QS53 Maintain individual selected set
QS54 Maintain selected set
QS55 Display selected set
QS58 Usage indicator - selected sets
QS59 Display selected sets
QS61 Maintain material specification
QS62 Display material specification
QS63 Maintain material spec: Planning
QS64 Display material spec: For key date
QS65 Activate material specification
QS66 Plan activation of material spec.
QS67 Job overview: Activate mat. spec.
QSR5 Archive inspection plans
QSR6 Delete routings
QST01 Create Stability Study
QST03 Display Stability History
QST04 Display Inspection Plans
QST05 Graphical Scheduling Overview
QST06 Scheduling Overview (StabilityStudy)
QST07 Change Testing Schedule Items
QST08 Display Testing Schedule Items
QSUB Define subsystems
QT00 Test Equipment Management
QT01 Test equipment management
QTSA Product Allocations: Send Quantities
QTSP Product Allocations:Send Customizing
QUERY_BP_FSBPBILDER BP: Screen Customizing for Query
QV01 Create quality assurance agreement
QV02 Change quality assurance agreement
QV03 Display quality assurance agreement
QV04 Find Quality Assurance Agreement
QV11 Create technical delivery terms
QV12 Change technical delivery terms
QV13 Display technical delivery terms
QV14 Search technical terms of delivery
QV21 Create QA agreement (DocType Q03)
QV22 Change Q-agreement (doc. type Q03)
QV23 Display Q-agreement (doc. type Q03)
QV24 Find Q-agreement (doc. type Q03)
QV31 Create Q-spec. (doc.type Q04)
QV32 Change Q-specification (docType Q04)
QV33 Displ. Q-specification (docType Q04)
QV34 Find Q-specification (doc. type Q04)
QV51 Create control for QM in SD
QV52 Change control for QM in SD
QV53 Display control for QM in SD
QVM1 Inspection lots without completion
QVM2 Inspection lots with open quantities
QVM3 Lots without usage decision
QZ00 Quality Certificates
Hope this will help.
Regards,
Naveen. -
ACE synch fail from device manager
Hi
I am getting sync fail on device manger A3(2.2) to ACE 4710 appliance when I am changing certificate in one of proxy service. I really greatful if any one has idea.
Thanks
VakilHi Vikil,
Can you tell me if both active and standby ACE are still in sync? Check the "sh ft group detail" command for this.
Can you confirm whether the new certificate is present on both ACE? See "sh crypto files" for this.
Finally, can you show me the config of the ssl-proxy that you would like to modify?
Thanks,
Olivier -
A-V Service won't start on edge
On a Lync 2013 Edge I am getting these errors.
I need to say that yesterday everything worked I just changed certificate (edge, IIS- ARR,
Office web app).
- EventID 22021 LS A/V edge Server
LS A/V Edge Server failed to open a network endpoint.
Protocol TCP Address 192.168.33.28 Port 445
Cause: Either an invalid configuration or another process is using the resource.
Resolution:
Check the configuration of the LS A/V Edge Server and verify the network resource is available.
- EventID 22037 LS A/V edge Server
Failed to start kernel mode driver component.
Cause: An IP address and/or listening ports may be configured incorrectly.
Resolution:
Verify that the computer has the IP addresses specified in the topology configuration.
Determine whether any other application or service has already used the TCP/UDP ports specified
in the topology configuration.
My Configuration (edge)
LAN NIC : 192.168.17.208 / 24
DMZ NIC 192.168.3.208 /24, DG 192.168.3.1
Host File : 192.168.17.106 DC.domain.com, 192.168.17.208 LyncFE.domain.com
Certificate has sip.domain.com, meet.domain.com,lyncdiscover.domain.com, dialin.domain.com
... (when I open meet.domain.com correnct certificate is shown)
My Configuration (FE)
- InternalFQDN
Edge.domain.com, IP 192.168.17.208 federation, xmpp enabled, port 4443.
- next hop is LyncFE.domain.com
- External Settings:
- Access Edge, Web Conferencing and A/V edge are the
same (just the ports are different)
sip.domain.com, 192.168.3.208 (5061,444,445)
Any Ideas? Please help.Verify that IP addresses mentioned in topology builder and edge server external NIC card. External web service FQDN and Access edge FQDN are the same.
For this issue "Event ID 22037 & Event ID 22021" , Check below link which is helpful
http://www.lyncfix.com/2013/09/09/lync-av-edge-server-failed-to-start/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali
Maybe you are looking for
-
Deployment Application To Weblogic Server Failed
Hello every body I need your help in this problem please : I'm using Oracle JDeveloper 11.1 in my local machine, I Installed Weblogic Server 10.3 on the server and it's works well, I made new JDBC connection in Weblogic Server and it's works well too
-
Compiling code in a program to a java file?
is there a way to in a program write code to a java file and compile that file? is there a way with a simple .compile or .run or something like that?
-
My location in Find My iPhone not clear.Fix the map
My location in find my iphone not clear..
-
How to multiply fields in inside alv
hi frnds, I am Created one table having sales order input and ALV table for out put having 5 fields, material , mat description, quantity , price , amount , currency are my fields. NOw quantity and price are editable in alv table - SO when i am chan
-
So where are my podcasts and other items that are in my itunes library
Once again Apple has decided to "upgrade" and change a perfectly serviceable "look" for why Who knows. But My podcasts are not visible nor are any of my other MP3 downloads. Where is the sidebar that allowed me to move around and navigate Itunes. My