Changing Chords while recording blue and green loops with Logic Express 9

My question is if it is possible to change Chord of the loops while recording them. Thank you in advance for answering this question

hi,
yes you can.
Global>Chord.
i've found it works OK, within the limits of the ALs.
but, occasionally, it would misbehave and do weird transpositions, wrong octaves,
etc.
this was in LP8, haven't tried it in LP9.
j.

Similar Messages

Recording a live DJ mix WITH LOGIC EXPRESS

Hi
I really need to know how to set up and record through logic express with my new MAC. I used to use Soundforge with a PC but now am completely confused!
A bit of advice would be appreciated!

1. Launch Logic
1b. go to Logic preferences and select your audio input source.
2. file- select 'new'
3. a window will pop up - audio or instrument - choose audio
4. choose 'stereo' , I expect.
5. Hit the record button and choose where you files are going to be kept
6. record your thing
7. In the master track that you probably see, choose 'bounce' Take note of the start and end point numbers. You would think when you tell it to bounce it would do that but - no - Logic needs to know bounce from where to where? Choose the file name and bounce away!! Good luck.

Blue and Green horizontal lines on my screen

I have the 2008 version of the MacBook Pro with the 15 inch screen. While using it last night I suddenly started seeing blue and green horizontal pixelated lines going across my screen. The first time it did it, I rebooted my laptop and it was fine for a while but then they came back. This morning when I turned it on, the lines were still there. I have no sort of warranty on this computer anymore. This is actually a computer I recieved from school back in 2008. Is this a sign my screen is going out?

Hello tattooedbeauty,
Thank you for the details of the issue you are experiencing with your MacBook Pro display. I would be concerned as well if I were seeing blue and green horizontal lines.
I found an article with steps to troubleshoot issues with displays. This article is for internal and external displays, so you can skip any steps referring to an external display. I recommend reviewing the full article, but this step specifically stands out to me:
Reset the system
You can reset the Mac's parameter RAM and SMC.
You can find the full article here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

I have blue and green vertical lines on my iMac which is no longer covered by Applecare. Is it fixable?

I have blue and green vertical lines on my iMac which is no longer covered by Applecare. Is it fixable?

What model iMac? Could be a failing video card but maybe not. Is it that way on every screen, startup to shutdown, any time the screen is lit?
Do you have an AASP nearby? Time to have an estimate made. Fixing it will likely be very expensive.

HT201263 Blue and green screen

My iPad won't turn on. Held both buttons and got a blue and green lined screen. Help???

You have to hold the sleep and home buttons down at the same time for at least 10-15 seconds and the key is to wait until the Apple logo appears on the screen before you let go of the buttons. It can take even longer than 15 seconds.
But the fact that you are seeing this funky screen makes it seem like it could be a hardware problem. Anyway, you still have to go through the troubleshooting steps and see if anything will help restore the iPad to working order.
Start here. Read any and all of the links that are in the kb article as well.
iOS: Not responding or does not turn on - Apple Support

Ipod touch with white screen and blue and green lines

I have had the newest ipod touch for a year now no problems..I was just on Facebook and the screen froze then went white with a lot of blue and green colored lines on it. It won't do anything I have tried plugging it in and holding down sleep and the home button for ten seconds but I get nothing. What should I do? Will this be covered if I take it took the apple store?

same here!!!
my iPod Touch heats up, I've been trying to take of the case and connect it to 2 different computers but the computer don't recognize it, I tried to power it off, to do hard reset but the device not responding.
is there a solution for this problem?
iPod touch 4th, iOS 5.0.1
here is a image of my device's screen.

How can I change the tuning (pitch) of apple loops with logic?

how can I change the tuning (pitch) of apple loops with logic? Is it possible at all ??? Cant get a clear information . I´m a user of Logic 9.14

Thanks.....but... How to change the pitch within a song arrange, lets for example say the loop is in F in original tune and i want him to be played in the song arrange maybe in A.... when i draw it in the arrange window, the tune goes back to the original...

Buyer change the PO line items and end up with Awaiting Approval status.

Can you please help to look into this issue.
1.Buyer change the PO line items and end up with Awaiting Approval status.
2. But user claim that she got enough limit and should not route to her manager's approval. Also check with her manager and this PO do not exist his queue.
Any clue or tips on how to investigate on this issue. All your tips are appreciated,
-Rick

You cannot change these POs because their changed version has status
'Deleted'. My proposal to fix them will be the following:
You will have to set changed version as closed(DOC_CLOSED set to X)
and in active version set DOC_CLOSED to space.
__-For the above statement, Can you guys please let me know, which table DOC_CLOSED belongs to and what are the steps to do this, as i come from a functional back ground.__

External keyboard only now and then work in Logic Express. Why?

I use a Roland JX 305 Synthgroove as keyboard with Logic Express. If I want to use it as Audio instrument, -using the sounds that are in Logic available - It only works now and then. I can play the keyboard, but after i changed a setting or switched shortly to another track, I have to start up Logic again, before I can get any music out of the keyboard. How come?

Also send you requests in using this link so Apple will see them and not just other users:
http://www.apple.com/feedback/ipad.html

Where can I find good organ and keyboard sounds for Logic Express?

Where can I find good organ and keyboard sounds for Logic Express? The included sounds seem to be lacking or hard to access.

Update: Not terribly impressed with the interface for NI's Vintage Organs from the demo download, although the sound demos sure sound good. The letters are tiny and hard to read and the whole thing feels very PC-centric. I guess a guy gets spoiled by the intuitive stuff. I think what I'll try for now is just hooking up my keyboard (Korg N1, circa 1998, about 1700 built in sounds) as a sound module and record the waveforms when I find a sound I like. I did find the EXS24 and several other software synths with some cool organ sounds after digging a little deeper. It would be good if Apple came out with another jam pack just for organs and keys, as the existing jam packs are so easy to use.

Connecting Interface and recoding with Logic Express 9

Hi apologies if I've posted this in the wrong location. I need some help.
I have just bought an iMac (with Logic express 9) along with a focusrite saffire pro 14 sound interface.
i'm having difficulties getting a line in and out of the focusrite and into logic.
I currently have passive monitors plugged into an amp, which is then plugged into the headphone jack on the iMac, the focusrite is connected via firewire.
my mic is connected via xlr with phantom power into the focusrite, and my guitar (via an effect unit with built in pre-amp) is connected into the 1/4'' input. both signals are showing levels on the focusrite mixer software - but no sound. the only output from the sound interface is the firewire.
I can record, and play back in logic using my usb midi controller- USB direct into the iMac.
i've selected the focusrite as the driver in logic, also as the input device in system preferences on the iMac.
any ideas when I am doing wrong?
any help would be good
thanks
Chris

Hi,
there are some points where the big bear trap might have snapped onto your feet
First: You said you have selected the focusrite as the core audio input device in Logic. This is okay. But have you selected the correct inputs for the audio tracks you are recording to? You focusrite has 4 possible line inputs (1 and 2 are combined on the front in the middle of the XLR jacks, which are also inputs 1 and 2 for mics, and 3 and 4 are on the back).
When you connect a headphone to your focusrite, can you hear your mic or your guitar? (turn up the monitor volume as well as the headphones volume!)
Given you really have a good signal that goes into your focusrite, the same signal should be available in Logic *for the appropriate inputs* . It won't work if you have plugged your guitar into input 3 and have input 1 or 2 selected in the channelstrip's input selector tab.
Second: Given there's a signal coming into Logic, where does it go from there? The focusrite has 4 outputs, and you should connect your amp&speakers to them. If your amp&speakers are still connected to your iMac's headphone jack, you must select your Mac's "built in output" as the output device in Logic. The OS X preference pane has nothing to do with Logic's preferences. Don't confuse them.
Cheers,
Fox

I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

I could really use some insight into this please also how many gigs of RAM should my power mac have it only has two right now and logic tends to glitch up majorly.

My original question :
I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

I have East/West Symphony. Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?

I have East/West Symphony.
Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?
Also, would it work with Garageband??

Thanks-that's the same driver I'm using now.
The M-audio techs were unable to tell me if Quattro would work with LE8, so I've been wasting my time and money trying to make it work.
They also gave me conflicting opinions as to whether or not "tip" polarity was an issue when using an after-market adapter. One said definitely yes, one or two others said definitely no.
Their phone tech line has a 20 to 40 minute wait when I call. The online support system is confusing, which even they admit. I don't think my next interface will be from M-audio.
Thanks very much for the response, it helps me get beyond this phase.
Is the Quattro of any use for anybody else (i.e., can I sell it or give it away)?

Photo Booth froze while recording video and did not save

Hi-
I was in the middle of recording a video on Photo Booth for a school project. Before you go any further- I now know that I should have used iMovie or Quick Time to record, but I was having the same problem with freezing/lagging video. So I decided on using Photo Booth because it is what I am most familiar with.
It was about a 20 minute video and I noticed that the picture would freeze every so often, even right after I began recording, so I know it is not a size issue. I also do not have anything in my Photo Booth tray or library, so I know I have enough space.
Here's my issue: I pressed stop when I was done recording. But I got the infamous "spinning wheel of death." It didn't go away, even after 10 minutes so I force quit. I have located the recording in Finder. It says the name of the video, and the size, but the thumbnail is just the default QuickTime icon, not an icon.
How do I recover this? It's extremely important that I do. Hoping EZ Jim will respond! Thank you so much in advance.
I am using a MacBook Pro 13" from 2011.

l_kleiman wrote: ... I should have used iMovie or Quick Time to record...
Yes, you should have. Do so in future recordings that are important or longer than a couple of minutes.
l_kleiman wrote:... the picture would freeze every so often,...
Because your problem is the same with all three video recording applications, we can rule out application software as the cause of your trouble. Here are some possible causes and what you can do to try to solve them:
(1) Video recording is processor intensive. If you are also running many more apps than only the video app while you are recording, your Mac's processor may be working near its limit.
Restarting your Mac before recording video ensures you will not have interference from multiple user accounts or widgets (unless they are included as  > System Preferences... > Account > Login iTems.
Remember that things like widgets and automatic checks for Mail, TimeMachine backups, iCal alarms, etc., and other background activities also add to your Mac's workload. The actions for the apps mentioned (and for most other such apps) can be disabled in "Preferences" for the apps that control them.
Disconnect all peripherals while you are recording video, and make your record monitoring window as small as possible. These suggestions help reduce processor power requirements while recording.
(2) Installing the maximum amount of RAM your MBP can use may help you. Your retailer can help you check what you have and install more if necessary.
(3) Alternatively, the cause of your symptoms May lie in your system software.
Consider the information in OS X Mountain Lion: If your Mac runs slowly. It applies equally to your OS X Lion system.
If you are not already running the latest Lion version, apply the OS X Lion Update 10.7.5 (Client Combo) update.)
l_kleiman wrote:... the picture would freeze ... even right after I began recording, so I know it is not a size issue. I also do not have anything in my Photo Booth tray or library, so I know I have enough space...
Neither freeze timing nor Photo Booth tray or library space tells you whether your startup disk has enough free ("Available") space for best operation.
Use your Mac's Finder > File > Get Info menu command to check available free space. Be sure you have LOTS of room (I keep 75% of my disk space free when recording video) on your MBP's disk.
Capture your movie clips on your MBP's startup disk rather than on an external drive which is almost certainly slower.
l_kleiman wrote:... when I was done recording... I force quit... but the thumbnail is ...not an icon. How do I recover this?...
If something here doesn't work, http://bit.ly/1An6zjD, your only remedy it to record the video again.
l_kleiman wrote:... Thank you so much in advance...
You're welcome. If you need to post back for other suggestions, please tell us the following:
0. What Lion version number you are using? You can find the version with the  > About This Mac menu command.
1. Are you recording your video subjects in bright lighting?
2. Did your Mac ever record video properly? If so, what happened immediately before the problem first appeared? (new software, hardware, etc?)
3. How much free space is "Available" on your startup disk?
4. How much RAM is installed in your Mac?
5. If you added RAM, what brand (Apple, Crucial, Other World, etc.) did you install?
6. Have you used Apple Hardware Test to verify your RAM is all working? (If you don't know how to use AHT, see your MBP's User Guide.)
We will offer more specific suggestions based on the details in your response.
Message was edited by: EZ Jim
Mac OSX 10.10.2

Blue and Green Screen

Can you do blue screen and green screen things on Final Cut Pro? Don't tell me how because I don't own it. I just want to know if it's possible.

www.dvgarage.com
Look at DV Matte Pro...as another option.
Shane

Changing Chords while recording blue and green loops with Logic Express 9

Similar Messages

Maybe you are looking for