Changing color label of edits coming back from photoshop

I am currently using lightroom 3.2 RC. The issue is when sending a raw file out to photoshop then at the conclusion of editing as the file arrives back to lightroom, it now keeps it original color label (yeah), but if I now attempt to change it's color label from one color to another that I use to denote a completed PSD file, the file losses it color label completely and ends up without a color label at all (similar to what use to happen in 3.0), and I have to go find it and relabel it again.
hopefully I explained that well enough to catch the fault that exists
mike

I only have PSE8 and not Photoshop, but I cannot reproduce this behaviour by externally editing a Raw file in PSE8 from LR. When using PSE, you have to have LR render the PSD on the way to PSE already, which is a difference to Photoshop.
What technique are you using to assign the new color label when coming back from PS (keyboard shortcur, Metadata panel, ...)?
I'm using LR3.2RC on WinXP SP3.
Beat Gossweiler
Switzerland

Similar Messages

When i put my Mac for sleep it takes more time than normal ( 20 secs). Sometimes, coming back from sleep the system is not responding (freeze).

When i put my Mac for sleep it takes more time than normal (>20 secs). Sometimes, coming back from sleep the system is not responding (freeze).

Perform SMC and NVRAM resets:
http://support.apple.com/en-us/HT201295
http://support.apple.com/en-us/HT204063
The try a safe boot:
http://support.apple.com/en-us/HT201262
Any change?
Ciao.

After upgrading to 10.6.6, major problems coming back from sleep mode

I updated my macbook from 10.6.5 to 10.6.6 and now it is unresponsive frequently after coming back from sleep. The computer stops responding and I have the spinning beach ball on the screen forever. I couldn´t find any correlation with the programs I am running.
I used Onyx to clear all caches, rebooted, etc but nothing seems to help...

I have the same issue, I've found though that it seems to happen only if i goto sleep mode after logging out of my mid-2010 MBP. As long as I remain logged in and put the MBP to sleep it does not lock up with the spinning beach ball.
This lock seems to happen just as I click on my name to login after waking my MBP from sleep.
I have no peripherals, except maybe the power adapter, but it seems to happen regardless of if the power adapter is plugged in. I've done repair permissions in safe mode as well as disk scans.

Satellite P850-30W - Fan does not run after coming back from sleep mode

I got a Toshiba Satellite P850-30W with bios 1.90.
Sometimes the fan does not run at all after coming back from sleep mode on windows 7.
This has happened twice (maybe more times without me knowing), and Ive had the computers for a month.
Normally the fan starts running when the CPU gets over 50 celsius, and stops under 50 celisus...
I tried running Prime95 when this fan-issue occured and the computer temps got dangerously high (close to 100 degree)! the fan did not start at all
...this error could potentinally damage the laptop...
to get the fan running again I have to restart windows
anyone else experienced this?
I guess the fix would be to never use sleep-mode...or toshiba needs to fix it with a bios update.

What kind of answer do you expect here in user community?
Exact info about the fault? I dont think that somebody would be able to provide exact answer but just speculations
In other Forum you can read about Satellite notebook; but is it exacts the same model?
No, it seems to be an L650 series. Its completely different series .
From my opinion its not software related problem.
BIOS issue?
Well, in case it would be a BIOS issue, the problem would appear always and not sometimes after being shut down 200 times.
It could be a hardware related issue. Memory? Maybe
In my personal opinion to get more details hardware diagnostic software should be used in order check the hardware for possible malfunction. Thats my personal opinion

Creative zen V+ still not working after coming back from assistance for the second ti

hallo, what thje hell is happening with creative Zen V+ I got it back from assistance for the second time and it's still not working!!!!!!!!!!! I want my money back now, I'm gonna spam the whole of the internet with this unfunny joke, what the hell I'm suppoised to do I really fed up, since I bought the unit it worked for less than one month and for another one it's been back to the assistance for two times!!!! And still it's not working!!!! Now let me tell you this creative zen V + is a worthless, costly, cheap piece of crap, and I mean crap, what the hell am I supposed to do now Send it back for the third time 249 euros for this crappy piece of cheapo plastic Please is it allowed me to send it back and having in change some olther player I don't mean it to be trendy or flashy or all of the usual marketing **bleep** coming with these, I just want a player that actually play my music, a player I can load all my music without the application to freeze, the player to freeze and me having to format and reboot again and again. Is it creative capable to accomplish such task, do they still know how to build an mp3 player that actually work without me having to buy and install windows vista Or they don't Do creative have some old player still in stock zen touch wasn't stilish but worked well until the HD dyied, zen V plus isn't working as it is supposed to do, plain and simple. What do I have to do now in case you are wondering the malfunction is still the same.

For the Zen V, as it states on the box, you need Windows XP Service Pack or 2, or Windows Vista. You also need Windows Media Player 0 or . As long as you have that, you should be fine there.
You may also have a corrupted file that is causing the problem. Try not transferring them all at once, transfer it in blocks instead. If one block fails to transfer, try and narrow it down and see if it's a specific file in that block causing the problem.
When you try it on another PC, do be sure that PC meets the system requirements, especially the Service Pack if it's Windows XP. You'd be shocked how many times people try it on a 2nd computer, get angry when it doesn't work, call tech support, and find out the 2nd PC doesn't even have SP on it.
All else failing of course contact Support. They can't help you if you don't let them know what's going on, and if you don't yell at them they'll do their absolute best, trust me.
Good luck,
Dale

How can my edited picture Back from PS CS3 to Lightroom?

I was working in a project. One picture I need to take it back to Photoshop CS3 for the edit. It works great. But after edit I could not take it back my edited picture to Lightroom and I did not see any command as well. And during that process I lost my edited picture and do all over again staying in the Photoshop.Is there any way that we can safely return to Lightroom with the edited picture?
Thank You.
jeevan

When you are finished editing in ps , make sure you use "save", not "save as".
If you use save, the edited file will "return" to LR automatically.
If you change the name, you are going to have to reimport it into LR from the disk. Andy

Saving edited image back to photoshop from lightroom

In Lightroom 4 and Photoshop cs5 I could export to Photoshop from lightroom...edit....then save and the edited photo would go back to Lightroom complete with edits. Now in LR5 and CC the edited image does not go back to LR I have tried syncing no avail...any idea?

I just recently started trying to use my Photoshop CS3, after acquiring it 3 years ago, and never quite getting around to tackling it, since I was still using good old PS v.7.0. I finally made the leap. What a shock! The CreativeSuites version is entirely different from the old versions, and, so far, impossible for me to figure out. Most of the functions I was used to are drastically reconfigured from standard PS's. (I'm going to have to get a Users' Manual or take another class.)
One thing I DID figure out is the function you are questioning. Export a downloaded iPhoto shot - from your iPhoto - to the desktop; Open Photoshop and open the iPhoto shot (will be in the Preview mode) in Photoshop, save as a Photoshop tiff, and do whatever editing, retouching, etc. in Photoshop. Save, and then from iPhoto, import - fom desktop - back into iPhoto Library.
If anyone know where i can get a comprehensive (beginners") manual on how to use the CreativeSuite version of Photoshop, please communicate! (After 3 years, I can't locate any manual that may have come with the software and there is no PDF version that I can find on line. I am completely mystified.)

Prints coming back from the lab murky, dull

Hello everyone,
I've been fighting with this issue since I started using Lightroom.
I'm using XP SP2, Lightroom 2.3 and CS3. View Sonic monitor calibrated with Spyder2. For printing I use a Canon Pro9000.
I work in RAW (Canon 50D) and convert to jpg (Adobe RGB 98) for the lab. The profile is embedded. On my Canon printer, the prints come out fine, very close to the monitor. I let Photoshop manage color and use the Canon PR1 profile.
I'm still getting prints back from the lab darker, with skin tones a little murky.
If I turn the brightness and contast down, I can get the screen to look like the prints, it's way to dark to work with. I used a second monitor to compare, they look close enough to call them the same.
I've been though the process many times and just can't see what I'm missing.
Going Nuts,
Paul

With apologies to Jao
This thread illustrates what can happen when the original poster marks a question as "answered".
While Jao's suggestion certainly has merit in many instances, having his suggestion marked as THE answer is a bit misleading. The problem is that the original poster is apt to assume that submitting sRGB images to WHCC (White House Custom Color) IS the answer.
Unfortunately, the real question the OP should address is why, when he submitted an image in the Adobe RGB color space that contained an Adobe RGB profile, the prints returned from WHCC were unsatisfactory. WHCC does perform color management and I have the prints to prove it.
In other words, a little more digging on the part of the OP is probably in order.

TP Yoga 15 - Windows: Keyboard response too slow after coming back from hibernation

I've got the same issue as outlined in this thread for a Y50 - there seems to be a BIOS update to solve it, but what about TP Yoga 15? Quote:Simply put, In keyboard properties , the Repeat delay is default at maximum (eg, holding down a keyboard button and how fast it generates the key strokes). When the system is put in hiberanation, then turned on again to come back, the Repeat delay some how gets decreased to about 2/3 of what it originally is. https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Re-Y50-Windows-8-Keyboard-response-too-slow-after-coming-back/td-p/1676309/page/1

hi guys,
Can you please provide also these additional information:
(this is to check if the issue is isolated to a certain model number)
Model Number (eg. 59-xxxxxx):
Place of Purchase (eg. Amazon, Bestbuy, etc.):
In addition, the solution from this thread seems to be a good workaround (the app is for Win7 but may also work for Win8.1)
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Retrieving the previous session fater coming back from a different appserv

Hi
My requirement is given below .
Currently I am in Application1 with session1 -now i went to Application2(different app server than application1) with session2 ....now i want to come back to Application1 with previous session i.e session1.is it possible to retrieve the old session using urlrewriting?? if yes then how??
Regards
Ravi

Hmm,
I don't think so, with URL re-writing. The reason is because application2 would need to do the re-writing, and so would need to know the JSESSIONID of session1, which presumably it wouldn't know.
Options, I guess, would be to pass the JSESSIONID for session1 to application2, which stores it, then uses it to re-write the URL when coming back to application1. Or you could add a persistant cookie that stores the JSESSIONID from session1, then when you enter into application one, check for the cookie, and re-use the same session. You would want to double check your session timeout however, because the session may die if the user is in application2 for too long.

Change color label .setStyle

hi anyone knows personnel, such as changing color of the label at run time and return to original color
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
           <mx:Panel id="panel" width="469" height="415" headerHeight="90" layout="absolute" horizontalCenter="27" verticalCenter="-10">
               <mx:Button
                         id="button" click="{effect()}" x="10" y="208" width="122"
               </mx:Button>
               <mx:Label id="inform" x="140" y="100.8" width="86" />
           </mx:Panel>
    <mx:Script>
        <![CDATA[
            public function effect():void
               // I go to red
                inform.text="test!".setStyle("color", 0xff0000);
               glowImage.play();
               //after the end return to the blue
               inform.setStyle.setStyle("color", "Blue");
            ]]>
    </mx:Script>
        <mx:Glow id="glowImage" duration="1000"
                    alphaFrom="1.0" alphaTo="0.3"
                    blurXFrom="0.0" blurXTo="50.0"
                    blurYFrom="0.0" blurYTo="50.0"
                    color="0x00FF00" target="{inform}"/>
</mx:Application>

If this post answers your question or helps, please mark it as such.
I have to ask what you are trying to do, because this is an interesting use of an effect.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:Panel id="panel" width="469" height="415"
    headerHeight="90" layout="absolute" horizontalCenter="27"
    verticalCenter="-10">
    <mx:Button id="button" click="effect();"
      x="10" y="208" width="122"/>
    <mx:Label id="inform" x="140" y="100.8" width="86" />
</mx:Panel>
<mx:Script>
    <![CDATA[
      public function effect():void{
        inform.text="test!";
        glowImage.play();
    ]]>
</mx:Script>
<mx:Glow id="glowImage" duration="1000" alphaFrom="1.0"
    alphaTo="0.3" blurXFrom="0.0" blurXTo="50.0"
    blurYFrom="0.0" blurYTo="50.0"
    color="0x00FF00" target="{inform}"
    effectStart="inform.setStyle('color', 0xff0000);"
    effectEnd="inform.setStyle.('color', 0x0000ff);" />
</mx:Application>

MBP 17 2009 LCD does not turn on after coming back from sleep

Hi,
I feel like crying.
I bought my 1st Mac 3-4 days ago and I have not regretted anything more than this.
1st some mov files that Quicktime windows can play but Mac does not (feel like pulling my hair why as the videos with same settings taken with same camera before I got the mac work perfectly from flash drive.
2nd the nVidia 9600m stopped being detected no matter what I did, next morning it magically re-appears (alongwith many things that vanished magically for e.g. options on right clicking images never came)
3rd the MOST BUGGING AND CONSISTENT
I close the lid, it goes to sleep. It has never come back from sleep. The screen will never turn on. Then I force shut down keeping power button pressed. And even after 2-3 restarts the screen doesn't come up. I wait for 2 min and then start. It starts working.
ANY IDEA WHY?
I use a usb mobile braodband modem (Huwaeii telecom's) and have a silly feeling maybe that might case something. But even that doesn't.
My next guess is temperature. I am working in 30-40 degree celcius room temprature range. Maybe that is it.
I think Mac is overrated and it breaks my heart saying that as I spent $2300 over it which is a HUGE amount in my part of the world. I needed it for Final Cut Pro.

I am sorry I do not understand the response. You're saying this is a known issue? Or are you suggesting/asking "IF" it is an OEM issue?
Because the whole problem I have is the "IF". I am not able to comprehend what is the problem.
And Yes the machine is 6 days old. Calling technical support doesn't help.
Apple doesn't look obsessed about customer satisfaction in India (My Luck i bought it from the only iStore in my area, hope they correct it).
The nVidia 9600M is sometimes there sometimes not. Lately even simply starting the machine does not make the screen turn on.''
Is there a debugging to-do list? Oh I am so "OS X"-impaired.
Thanks,
Rachin

My iphone 5's screen is broken after coming back from mail in service...What happened?

I just got my iPhone back from mail in service through applecare and the screen is shattered! I refused service because they wanted me to pay for it and so they sent it back. I originaly sent it for them to fix the microphone because it stopped working, and then i got an email saying they found accidental damage. There was a picture on the support page but it wouldnt load. So what the heck happened to my iphone because I know I didnt send it like this.

sounds like in the mail it broke

Problem with video coming back from fullscreen: duplicated controls

Hi there!
I'm using the following code to go fullscreen with a video, the video controls are set to autohide.
The problem comes when I close the full screen mode (by button or simply with scape) to normal mode, flash places a new video control that stays over the video and if I place the mouse over the movie I can see the autohiden controls appearing under the new added one.
Any hints?
Thanks.
flvControl.autoPlay = false;
flvControl.autoRewind = true;
flvControl.scaleMode = VideoScaleMode.EXACT_FIT;
flvControl.source = flvSource;
flvControl.skinAutoHide = true;
flvControl.addEventListener(Event.COMPLETE, onComplete);
function goFullScreen():void
    if (stage.displayState == StageDisplayState.NORMAL)
           stage.displayState=StageDisplayState.FULL_SCREEN;
    else
           stage.displayState=StageDisplayState.NORMAL;
flvControl.fullScreenButton.addEventListener(MouseEvent.CLICK, _handleClick)
function _handleClick(event:MouseEvent):void
    goFullScreen();

@Andrew Rosewarn
Hmm, that much I'm aware of...
Is there anything that can theoretically exist in the displayList that doesn't necessarily take up an index?
When I check the index on my main application, there are only 2 items. [0] and [1], yet the [1] component is still being covered up by something...
I tried not hiding the [0] component (visible = true) and I can see it, but there is some kind of overlay over it that restricts me from clicking of the buttons on that component. And the overlay has a partial opacity, which is slightly transparent...
If there is no such possibilty, that would mean that overlay is actually my [1] component... but it is slightly transparent and missing all visual indicators that it IS indeed the [1] component..
This only happens when I come go to fullscreen then come back from fullscreen before the video completes and all those functions run.
The [1] component gets added upon the videoDisplay.COMPLETE event, that fact along with double checking the index confirms that the sharingBookmarks component is indeed on the top of my display stack..
Any clues or directions are greatly appreciated, thanks!
DK
p.s. I can provide more code or answers to any questions if anyone is interested in solving this puzzle.

How can I get my photos back from Photoshop Album 3.2

how can I get my photos back from Adobe Photoshop Album 3.2 edition

This is the Phooshop forum.
You probalby need to check the Photoshop Album forums at http://forums.adobe.com/community/ps_album_starter?view=discussions
or the FAQ about Album at http://feedback.photoshop.com/photoshop_family/topics/what_happened_to_adobe_photoshop_alb um_starter_edition

Changing color label of edits coming back from photoshop

Similar Messages

Maybe you are looking for