Changing colour/inverting colour of mouse pointer

I am using Tiger on an intel-based mac mini, but would like to change the colour of my mouse pointer to make it easier to spot.. has anyone got any suggestions?
mini Mac OS X (10.4.3)

You can make the cursor larger with the "Mouse" pane
of the "Universal Access" System Preference. It
helps a lot on a large screen.
i know you can change the pointer size - I have done that, but i find looking for a black arrow difficult. I want to change the colour!
mini Mac OS X (10.4.3)

Similar Messages

Colour of Mouse Pointer

Sorry about a dumb question but how do you change the colour of the mouse pointer I can make it bigger or smaller but want to make it a solid colour other that black
iMac G5 Mac OS X (10.4.5)

Sorry about a dumb question but how do you change the
colour of the mouse pointer I can make it bigger or
smaller but want to make it a solid colour other that
black
iMac G5 Mac OS X
(10.4.5)
To make the mouse cursor bigger or smaller goto System Preferences -> Universal Access -> Mouse then you can use the slider to make the mouse cursor bigger or smaller.
So change the colour and style of the mouse your are best using a haxie from unsanity called mighty mouse

Why do i get a colourful circle mouse pointer on some web sites but not all sites

Hello
I seem to get a cirlce as mouse pointer on some web pages but cannot fiure out why ??? it has only just started to happen some web pages are fine

See:
* http://kb.mozillazine.org/Error_loading_websites

Can I change the look of the mouse pointer?

I was wondering if it’s possible to change the look/style of the mouse pointer just like you can in Windows?

Unsanity's Mighty Mouse is the only one I know of that can.
They also have this page of cursors they've already made you can use with the program.

Changing size and color of mouse pointer...How? OSX 10.9.1

I'm having problems seeing my mouse on the screen. It's really frustrating sitting down and not finding it, immediately.
How do you change it? I just can't find it.

Adjust cursor size in System Preferences > Accessibility > Display

How to change mouse pointer

I would like enlarge or change the color of the mouse pointer. Can anyone help

No, they didn't. I am running 10.7.3.

Change color of mouse-pointer?

Hi,
is it possible to change the color of the mouse-pointer from e.g. the given black to red?
Thanks,
Michael

The subject is discussed (not very clearly) here:
http://www.mackb.com/Uwe/Forum.aspx/mac-apps/18267/Cursor-color
There are various bits of software around which will change your cursor to a different image (though inevitably many of them are for Windows): some searching on Google will throw up plenty of this sort of thing.
Be aware that all these methods are in effect hacks: they may be unreliable or make your Mac unstable. Use at your own risk.

Exported PDF changes colour depending on software its viewed on

Hi
I've searched on the forums but can't find a solution to my problem. I export my design to PDF in indesign CS6 and looks fine on my Windows 8.1 laptop, but when the printer company open it up in their software it changes colour. I can replicate it viewing on my iphone for some reason.
Please see the below pictures to see what I mean:
Correct colours:
Dropbox - Correct Colour.png
Incorrect colours:
Dropbox - Incorrect colour.png
PDF export settings:
Dropbox - PDF Settings.png
Please let me know if you need anymore details.
Thanks
Stephen

@Stephen – you told us where you see the incorrect colors. But you did not tell us where the printing company sees the incorrect color. What is there application? An iPhone has no color management. It is no color proofing device. Not at all!
As Willi already pointed out: Acrobat Pro will qualify, Adobe Reader will qualify.
"Correct color" is a wide field… ;-)
And on not-callibrated monitors or devices the numbers of individual colors count (always coupled with their output intent, of course).
Uwe

Is it possible to make a cell change colour of a period of time with rules?

Is it possible to make a cell change colour of a period of time? for example
Date
Company
Pick Up
Destination
Total
Paid
Sat, 5 Apr 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
FALSE
Is it possible for B7 to change colour if 2 weeks have passed from the date in B1 and Paid is still FALSE and green if it's TRUE?
Many thanks.

Hi NeoNapster,
This may be a start. Conditional Highlighting of a cell that depends upon the values in other cells can be tricky, but we can work on that.
Date
Company
Pick Up
Destination
Total
Weeks
Paid?
OK?
Sat 5 Apr 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
29.0
FALSE
Overdue by 29.0 weeks
Sat 4 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
3.0
TRUE
OK
Wed 1 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
3.4
FALSE
Overdue by 3.4 weeks
Wed 8 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
2.4
FALSE
Overdue by 2.4 weeks
Mon 20 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
0.7
FALSE
OK
Sat 25 Oct 2014
COMPANY NAME
PICK UP POINT
THE DESTINATION
£100.00
0.0
FALSE
OK
Table with one Header Row
Formula in F2 (Weeks) and Fill Down
=DUR2WEEKS(TODAY()−A2)
That shows the Duration in weeks from the Date in column A until TODAY. You can hide this column.
Column G can contain the text TRUE or FALSE or could be checkboxes.
Formula in H2 and Fill Down
=IF(G2,"OK",IF(F2>2,"Overdue by "&F2&" weeks","OK"))
IF a cell in G is TRUE, then insert "OK". No need for any more checking.
Else IF a cell in F is greater than 2, then insert "Overdue by" and the number of weeks
Else insert "OK" (the invoice is less than 2 weeks old).
Conditional Highlighting of the Body Cells in column H. Select the cells.
Add a Rule...
text is
OK
Green Fill
Add a Rule...
text is not
OK
Red Fill.
Column H with the Conditional Highlighting rules:
OK?
Overdue by 29.0 weeks
OK
Overdue by 3.4 weeks
Overdue by 2.4 weeks
OK
OK
(And I have just discovered that colours do paste into this forum ).
Regards,
Ian.

Hyperlinks don't change colour

I'm a real newbie with iweb, don't really understand the tech stuff. However, I made a site based on a template with some custom made texts which I made hyperlinks to the other pages. Thing is, when the mouse goes over them they don't change colour. When I made a previous experiment, on a diff template, they worked fine. The hyperlinks on the template change colour fine but not my custom ones.
Also, all the links work on the design page but when I preview in Safari, one doesn't!

Tod ~ Yes, you would have to upgrade to iWeb 2 in iLife '08. Then in Inspector's Link tab, you'll have a Format tab via which you can specify the colors of your hyperlinks. This video tutorial shows that Format tab, although its use is not demonstrated:

How do I change colour negative to positive?

How do I change colour negative to positive?

Using the application Final Cut Express?
Are you speaking of a film negative for a photograph?
You can edit the image to the timeline, then go Effects Tab > Video Filters > Channel > Invert and apply the Invert effect to the clip on the timeline.
Note that film negatives do not render color correctly when inverted. When they were printed, color correction "packs" were applied that were emulsion specific to balance the latent color skew present in the negative image.
So you will also need to then add the effect Video Filters > Color Correction > Color Corrector and make further adjustments.
MtD

Lightroom changes colour in my RAW files captured with NIKON D300

Dear All! Lightroom changes colour in my RAW files captured with NIKON D300. Some of the images are completely ruined. I am sure Adobe must be aware of this problem. What could be done? Is there a solution? Many thanks for your help. Regards, Stanislav

You want "something different" but this "something different" is quite hard to define.
I want a result which reflects the result on the camera. Have the feeling the display
of the D800 is not the greatest, at least (not only the color issue which is often discussed)
but also the exposure. Often I think I would need to compensate it, but then afterwards
on the computer the non corrected version looks most of the time better.
I think its interesting to see how allergic people react when the word jpeg comes up.
This is also just a rendered result, just by the camera. There are many options in my cam.
I like the vivid setting with some modifications. And that gives me a result I like.
And if I like the result, why shall I spend way more time to replicate it?
I do not talk about that I would want the jpeg, I only say that what I get color wise out of the
box is how I would like to look at it. I still want the capability to fix for example exposure in image,
but I want the base the version I got from the jpeg view (or how the Nikon raw software could do).
On Lightroom I did not manage to have a profile that looked as appealing to me.
It also consumes way more time in my workflow to fix all pictures manually and results might differ.
To work on an image you need a starting point, I do not say the jpeg look is always perfect and
what I want all the time, but most of the time it is.
You say yourself you use profiles. So why should there not be a profile which automatically adjusts to the camera settings.
Its so frustrating to see a look which you like (the preview image when the pic is first accessed) and
then Lightroom switches to its own rendering which is flat and which I do not like.
For me its clearly something Adobe and/or Nikon should fix, like the mentioned "auto correct to preview look",
Nikon profiles/settings/raw-details in Lightroom or for example a Nikon import module.

Thumbnails that change colour

Hi there,
Fist off I apologise if this question seems ridiculous but
please bear with me.
Would I be correct in saying that should I require a
thumbnail pic which acts as a link to a larger image to look sepia
or B/W but change to colour on mouse over I could use the following
code:
<a
onClick="MM_openBrWindow('/mypages/screen2.htm','screen2','width=1024,height=768')"
onMouseOver="MM_swapImage('screen2','','/mypix/thumb2_over.jpg',1)"
onMouseOut="MM_swapImgRestore()"><img
src="/mypix/thumb2.jpg" alt="screen2" width="67" height="50"
name="screen2" />
</a>
If so, is there any
quick & easy way of doing this in DW?, until now I have
been using copy & paste a lot which does the job.
Regards, Andy -(Esskie)

That code would be the way to do it (unless you did the
rollover with CSS).
Select the thumb image, apply an OpenBrowser Window behavior,
and complete
the dialog. Then apply an image swap behavior, and complete
the dialog.
Make sure that you select the <A> onClick, and
<A> onMouseOver events for
the behaviors, respectively.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Esskie" <[email protected]> wrote in
message
news:eb1v0r$emq$[email protected]..
> Hi there,
> Fist off I apologise if this question seems ridiculous
but please bear
> with me.
>
> Would I be correct in saying that should I require a
thumbnail pic which
> acts
> as a link to a larger image to look sepia or B/W but
change to colour on
> mouse
> over I could use the following code:
>
> <a
>
onClick="MM_openBrWindow('/mypages/screen2.htm','screen2','width=1024,height=768
> ')"
>
onMouseOver="MM_swapImage('screen2','','/mypix/thumb2_over.jpg',1)"
> onMouseOut="MM_swapImgRestore()"><img
src="/mypix/thumb2.jpg"
> alt="screen2"
> width="67" height="50" name="screen2" />
> </a>
> ?.
>
> If so, is there any
quick & easy way of doing this in DW?, until
> now I
> have been using copy & paste a lot which does the
job.
> Regards, Andy -(Esskie)
>

[f8] Changing colour of clips on stage via AS

Hi all
I have 20 odd little swfs, each of which will be loaded into
a body swf at one point or another.
Each of these contains anywhere between 4 and 20
single-colour buttons. What I need is for each of them to simply
change colour when rolled over/out.
Here is the code thus far thanks to some outside help, but I
can't pick where it's going wrong.
The naming convention is just b1,b2 etc depending on how many
said buttons are in each clip.
Suggestions?
Cheers
this.i = 0;
while(this["b" + (i++)]) {
this["b" + i].onRollOver = function():Void {
this.colour.setRGB(0x5FBEFE)
this["b" + i].onRollOut = function():Void {
this.colour.setRGB(0x139FFD)
delete this.i;

Problem solved :)
this.i = 0;
while(this["b" + (++this.i)]) {
this["b" + this.i].onRollOver = function():Void {
myColor = new Color(this);
myColor.setRGB(0x5FBEFE);
this["b" + this.i].onRollOut = function():Void {
myColor = new Color(this);
myColor.setRGB(0x139FFD);
delete this.i;

Rollover and change colour

Hi
I would like to change colour of a text when the mouse rolls
over, and when the mouse has passed it should go back to normal. Is
this possible? I have found the behaivor "rollover member change"
and used two identical texts with different colours, but cant make
it work. Is this the right way? Thanks for helping! /emma

You could attach a behavior to the sprite on the stage such
as this. It would change the text to red when the mouse is over the
sprite.
property pMem
property pColor
property pColorOver
on beginSprite me
pMem = sprite(me.spriteNum).member
pColor = pMem.color
pColorOver = rgb(255,0,0)
end
on mouseEnter me
pMem.color = pColorOver
end
on mouseLeave me
pMem.color = pColor
end

Changing colour/inverting colour of mouse pointer

Similar Messages

Maybe you are looking for