Changing colour of the bears from black to green

Hi! I am trying to change the colour of the bears in my image from black to green. Tried the method of using the magic wand to select all the similar black pixels to change to blue. However,the magic wand does not pick up all the pixels. Is there a better way to do this? Appreciate advice. Thanks!
http://img240.imageshack.us/my.php?image=72dpibearsrx5.jpg

Another way:
1. Use the Magic Wand to select the background color. For my example below I used the default Tolerance value 32. I also unchecked the Contiguous box, so that the tiny piece of background at the bottom between Mama and baby is also selected.
2. Invert the selection so that the bears are now selected.
3. Set Foreground color to green.
4. Edit>Fill.
Choose options Foreground Color, Mode = Color, Opacity 100%
5. [optional] With the bears still selected add a Hue/Saturation layer. This will allow you to go back later to change the bears' lightness and color.
example: http://www.pixentral.com/show.php?picture=1SMNj1qDOKF6MVWDuQoGr4m99OB7

Similar Messages

  • Hello everyone, you can change the body of the iPhone from black to white?

    Hello everyone, you can change the body of the iPhone from black to white?

    Not and retain your warranty or the ability to have it serviced by Apple, no.

  • How can I change the background from black to white on Safari page header.

    How can I change the Safari page header from black to white, so that the addresses are black letters on white background. At present they are white letters on black

    Tap "Private" to change from black to white.

  • My iPad 2 screen has turned a weird colour. The background is black and the letters are white instead of the other way round and colour photos look like negatives. How do I change it back.

    My IPad screen has turned a weird colour, the background is white and the letters white instead of the other way round.  Colour photos look like negatives. How can I turn it back to a white background.

    Dear Steve,
    You are wonderful! You are the best! I'm Stephania and I recently purchased a refurbished ipad2. I've had it for about 3 weeks now and updating & fixing it so my liking. The only thing that I couldn't correct were the photos that looked like negatives. Every photo, even on the internet, on apps, everywhere! I just couldn't figure out how to fix it. I contacted Apple Care and its too difficult to get in touch with them. I had looked through support before but didn't put in the right question. Well, today I got lucky. I did the two things you suggested and turning the "White On Black" off did the trick. I'm so happy! I had a feeling it was something simple and this is not even in the manual!
    stevejobsfan0123 wrote:
    Try triple clicking the home button. If that doesn't work:
    Settings > General > Accessibility > White on Black OFF.

  • How to change colours of the document?

    Hi,
    I am working on a form that was build from Microsoft Doc and then scanned onto Acrobat Pro to create the form fields etc.
    Mananagement just told me that they did not like the colour of the document and want it changed to another colour. (from Blue to Green).
    Is there a way where I could 'edit' the colour change using Acrobat Pro ? 
    Unfortunately, I do not have Photoshop nor do I know how to use it.... 
    your help is much appreciated!

    Believe it or not  since the form was created from a scan (a Picture) its uneditiable
    Your going to have to go back into word recreate the document as a document
    Save as an adobe quality PDF from print menu (print menu > Hold PDF button down > Choose Adobe PDF or Adobe quality PDF.)
    Save the original.
    Open Acrobat and add the  Fillout fields. Leave background White.
    go to OfficeMax,Office Depot, Staples, or any office suppy and a couple of packs of the proper color blue paper
    Load up colored paper in Printer and print the PDF.
    It will save you a lot of head ache's
    If its to be filled out by hand You don't even need Acrobat.
    just create the form use a series of Tabs and format the tabs with solid leaders (Format Menu Tabs)
    Type one space after the last word before a tab that is to be a field
    Format that tab for a solid leader.  example "________"
    Fields that go to right edge of paper you shoul use it and set it to 7.5" if your using lettersized paper.
    If you need checkboxes make sure in Word 2011 click developer Tab and you can insert click boxes
    When finished save Document.
    Then save as a PDF.
    In acrobat follow first set of directions. except you can make the check box clickable field when clicked on with insert a chck or an x.
    Hope this helps

  • How do I change a layer selection color from black to a color?

    Somehow I've turned off the color selection so that I don't have a color when I select a part of a drawing on a layer.
    The drawing area stays black whether I have selected it or not and I don't know how to turn back on the color.
    Could someone tell me how I can turn on the color again so that when I select a line it changes from black to red or magenta or whatever?
    Thanks for the help.

    You can also control what color is used by double clicking on the layer name and changing the colro for the layer option.

  • How to have an object in colour and the rest in black an white?

    Hi everyone,
    Could someone please explain how I can create an effect where one object in the scene is in colour and everything else is black and white? I'm trying to have a red hawaiin shirt stand out like this. I'm using FCP 5, not 6 so I don't have the Color app which I believe does this.
    Thanks in advance
    Simon

    While I'm sure color can do this. It's also pretty easy to do in FCP.
    1. Apply the "Color Corrector 3-Way" to the clip.
    2. With the "Color Cerrector" Tab in the effects window open, look at the bottom of the window and you'll see "Limit Effect" with an arrow on the left side of the window. Click the arrow and some options will appear.
    3. Click the eye dropper tool and select the color you want to keep.
    4. Tweak the selection by adjusting the color sat, and luma options. (There's no true science to this you just have to play with it until you get what you're looking for.) To help click on the "key" below the eyedropper to toggle different views to help you get your matte right.
    5. When you're happy with the matte. Drag the sturation slider all the way down. The color that you selected is now desaturated.
    6. Below the "key" is a "trapezoid" button. Click and it will invert your selection leaving your selected color nice and saturated and everything else B&W.
    James

  • How to change colour of the Cell in a table

    Hi,
    Could you please let me know how to change the coluor of the cell at table.
    here i m having a column called "STATUS". i m getting data from backend and filling this column with two values(success/failed).
    when i get success, the cell should be in green color, when it is failed cell color should be red.
    i followd below:
    created a context attribute "color" of type
    com.sap.ide.webdynpro.uielementdefinitions.TableCellDesign
    i binded this with the column proerty "cellDesign".
    when i executed bapi i sohlud get different colors according to output.
    here is my execute function
    wdContext.currentZemp_Compare_InputElement().modelObject().execute();
                wdContext.currentUploadElement().setStatus(wdContext.currentMessageElement().getSuccess());
                if(wdContext.currentMessageElement().getSuccess().length()>6)
                wdContext.currentContextElement().setColor(WDTableCellDesign.GOODVALUE_LIGHT);
             else
               wdContext.currentContextElement().setColor(WDTableCellDesign.BADVALUE_LIGHT);
    but when i get value failed it filling red for all other cells in that column
    when i get value success, cells all r filling with green.
    how can i get only perticual cell colur should b green/red.
    plz try to solve this problem.
    wer i need to do changes?
    thanks in advance
    venkat

    Hi,
    For your scenario, you need to have two cellVariant as TableStandardCell (say successTSC & failTSC). Add tableCellEditors to these 2 TableStandardCell as you like. Mark there variantKey property as var1 & var2 respectively.
    Do change the cellDesign as you like the color for the TableStandardCell.
    Bind an attribute selectedVariant to your column selectedCellVariant property.
    Now in wdDoModify you can write:
    for(int i=0;i<wdContext.nodeCountries().size();i++){
    if(wdContext.nodeCountries().getCountriesElementAt(i).getStatus().equals("SUCC")){
    // Here node countries is the datasource of your table.
    wdContext.nodeCountries().getCountriesElementAt(i).setVariantKey("var1");
    } else if(wdContext.nodeCountries().getCountriesElementAt(i).getStatus().equals("FAIL")){
    wdContext.nodeCountries().getCountriesElementAt(i).setVariantKey("var2");
    The article below will definetly help you in your requirement.
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0310fd2-f40d-2a10-b288-bcbe0810a961]
    Hope this will surely solve your problem.
    thanks & regards,
    Manoj

  • Reading the changes with in the Transaction from Toplink

    Typically when we work on a transaction in a SQL Session ( say from SQL*Plus), the DML changes made with in that transaction are visible to the subsequent statements in the same transaction.
    How can we acheive the above functionality with a UnitOfWork? Using a query.ConformResultsInUnitOfWork helps, but only when the Toplink Cache is enabled. Can we achieve the same functionality in Toplink when the Toplink Cache is disabled.
    Many Thanks in advance for any information on this.

    Thanks for the update.
    Below is the sample code. It works fine when the Toplink Cache is enabled on the object. But when it is disabled the executeQuery below fires a query to the database and a null object is returned. I disable the cache at the descriptor level using the statements
    descriptor.alwaysRefreshCache();
    descriptor.disableCacheHits();
    myServerSession =(ServerSession) SessionManager.getManager().getSession("test100");
    myServerSession.login();
    myServerSession.initializeIdentityMaps();
    ClientSession clientSession = myServerSession.acquireClientSession();
    UnitOfWork unitOfWork = clientSession.acquireUnitOfWork();
    // transaction started
    unitOfWork.beginEarlyTransaction();
    Case t = new Case();
    t.setId("Case1");
    t.setClaimNumber("ClaimNo1");
    // object registered with uow, but not yet committed and not in the database
    unitOfWork.registerObject(t);
    Case t1 = new Case();
    t1.setId("Case1");
    //t1 = (Case)unitOfWork.readObject(t1);
    //get the same object using the conformResultsinUnitOfwork
    ReadObjectQuery roq = new ReadObjectQuery(t1.getClass());
    roq.conformResultsInUnitOfWork();
    roq.setSelectionCriteria(roq.getExpressionBuilder().get("id").equal("Case1"));
    t1 = (Case)unitOfWork.executeQuery(roq); //returns null
    //Update some attributes..
    t1.setClaimNumber("ClaimNo2");
    //Commit all changes
    unitOfWork.commit();
    The above sequence of statements works from a SQL prompt, but not from Toplink.

  • Changing colour of the apple

    Just wondering ...
    I heard that you could change the colour of the apple on the top cover of the macbook , im talking about the apple that is lit up white (at least it is on my white macbook). Anyway I heard who can chnge its colour ?
    is that true ?

    Yes, it would be a modification, and if you caused damage doing it, warranty wouldn't cover it.
    But if your hard drive, memory, logic board failed... these are likely not to be caused by the screen modification, so they'd still be covered.
    Again, the warranty, paraphrased slightly, says 'does not cover damages caused by unauthorized service or unauthorized modification'.
    Some products have a sticker over their screws, clearly stating 'warranty void if this sticker is damaged or removed'. Apple has no such stickers, and no such wording in the warranty document. On something like a computer, it would be extremely impractical to implement measures like that.

  • Iphone battery indicator says 100% but the icon is black not green

    i have a iphone 5c. the battery indicator icon on top says 100% but the icon is a batter but its all black not green. is that right? should it be all green?

    You need to make an appointment at the Apple Store Genius Bar to have it evaluated by the techs there. We are just users like you and cannot possibly diagnose what's wrong with your phone without looking at it.

  • Urgent HELP! how to resize a layout and change the color from black to white

    Hey!!!
    im in urgent help of someone to answer my questions. I have a huge Indesign exam monday and two of the questions are   
    -resizing a layout
    -changing a color layout to black and white
    I have done many porjects in Indesign but to be honest i don't know what they are refering but resizing a layout or changing the layout color to black and white. If any body can explain me this a little be I be so thankful!
    Thanks,
    Fiama Piccardo

    I've decided to relent a little and give you a hint, so you can do some looking and figure this out for yourself. Everything you need for either of those tasks is accessed from the File menu...
    And a further hint. Indesign does not have a black and white or grayscale working colorspace, so you never truly have a black and white layout, though all of the objects in the file may use only black ink. You can, however, output a PDF, in a couple of ways, that will convert your color file to one that uses only black.

  • At PGR moving avg price will be changed while pickup the goods from custome

    Dear All,
    I want clarification at moving avg price while retunrs from customer at consignment scenario.
    scenario: goods deliverd with 633 movt type at moving avg price. while returns case with movt type 634  moving avg price was changed.
    here user want moving avg price willl be requred same in return at what moving avg price taken in issue 633.
    i concerned this with mm consultant , they told its not possible to take like this in returns with moving avg price
    is there any possible to take mavg price like this..if possible how?
    Regards,
    Narendra

    hi
    this is to inform you that,
    this is not possible because master data in the system might have got changed from MVP.
    so then the system picks what ever the price stated there in MMR.
    hope this clears your issue
    balajia

  • How to change 9.0 background color from black?

    The general display background for Acrobat 9.0 is black. How
    do I change it to a more tolerable color?
    I am not referring to in-document background, which is white
    by default. I am referring to the black wallpaper that is present
    when opening the program, before opening a pdf file to view. The
    black stays behind the documents, giving too harsh a contrast.
    Windows XP lets me control the color of my desktop
    background. Can Adobe Acrobat 9.0 do the same?
    Thanks,
    Andy

    Dear Andy,
    Thank you for your post. These forums are specific to the
    Acrobat.com website
    and its set of hosted services, and do not cover the Acrobat
    family of desktop
    products. Please visit the following forums for any questions
    related to the
    Acrobat family of desktop products:
    http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/
    Regards,
    Lao Ma

  • HOW TO CHANGE BACKGROUND AT THE TOP FROM FIREWORKS?

    HOW TO CHANGE THE BACKGROUND AT THE TOP? IT NOW HAS FIREWORKS.
    == This happened ==
    Every time Firefox opened
    == Option to change to the fireworks at the top

    Sounds that you installed a Persona.
    You can uninstall that Persona and revert to the ''Default'' theme (Tools > Add-ons > Themes).
    See [[Using themes with Firefox]] and http://kb.mozillazine.org/Themes (Lightweight theme)

Maybe you are looking for