Changing Connection Settings on Thin Client T410 using HP Device Manager

Hi All,
Actually it is not a problem rather than it is an inquiry regarding configuring connection on HP thin clients- t410 remotely using HP Device Manager Tool or any other tool,
My inquiry is: in our organization we have around 500 t410 thin client or more, and we need to change the remote connection server address or name (connection type is RDP7) on these clients, as currently we have to do it on the remote clients one by one using shadowing option as detailed below steps (which of course is not convenient way).
Currently we have the HP Device Manager v. 4.6.
Steps:
1- Click on “setting” and select “Administrative/User Mode Switch
2- type admin. password.
3- Click on setting as below and select “Edit Connection Setting”
4- Under Conncetion Settings > Network > change the Address to x.x.x.x
5- press OK then Reboot
Thanks in advance and let me know if you need more details

any one has info about this post, please his feedback

Similar Messages

Transfering data using switch device manager from old palm to new curve 8330....please help!!!

Trying for hours to import data using switch device manager from old Palm Treo and Palm Desktop 4.2 to my new Blackberry Curve 8330. Blackberry seem to connect...but second step of choising Palm or Mircrosort will not allow me to select anything. I do not believe Palm is connecting...Is my palm to old? If I cannot tranfer data this way, especially contacts is there any other way besides entering it into Blackberry one by one?

Hi there!
If the device switch wizard is not working, check this KB to be sure all of your Palm things are compatible and that you are using the correct process:
KB05459 How to use the Switch Device Wizard to switch from another smartphone to a BlackBerry smartphone
And then see this KB for some troubleshooting help
KB10722 BlackBerry Desktop Manager does not detect the Palm software when using the Switch Device Wizard
And if it happens that it will not work, then you will have to find out how to export from your Palm to an ASCII or CSV file...then you can import it with this process:
KB11194 How to import contacts from an CSV file to the BlackBerry device
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Connection through jdbc thin client taking more time than from sqlplus!!!

Hello All
Machines A and B
Applicaion in A is connecting to B(9.2.0.6),db server.
The schema is so small with few tables and data in each table less than 500 rows
We are in the process of migrating the Application Schema in B to C[9.2.0.8].
But the response time is more when the application fetches from C.
Even while selecting the sysdate from dual.
The application is using the jdbc thin client for fetching the data.
When the same sql is executed by (from A to C)
sqlplus -s user/pass @execute.sql, its gets done in a fraction of a second.
But when the same is done through the application which uses jdbc thin client, it takes few seconds
to complete.
When tried with a small java program that uses classes12.jar (from A to C)
conn = DriverManager.getConnection(URL,UID,PASS);
               stop = System.currentTimeMillis();
               System.out.println("Connection time in milli sec: " + (stop - start));
               System.out.println();
..It was found that creating the connection was taking time.
But the same is not happening when tired through the sqlplus
Could someone throw some light into this?
What could be the reason for jdbc to get slower while establishing connections?
TIA,
JJ

are you using latest drivers - http://www.oracle.com/technology/tech/java/sqlj_jdbc/index.html
you may want to check some options reducing jdbc connection cost from the otn samples - http://www.oracle.com/technology/sample_code/tech/java/sqlj_jdbc/index.html

Manage "Change PC settings" in Win 8.1 using PS

how to manage "Change PC settings" -> Privacy in Win 8.1 using Powershell. Thanks.
-ss

That's a pretty broad question. What are you trying to accomplish?
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

What port number I have to give in connection settings of MI client

Hi all,
I installed mobile client and in the connection settings it is asking for a port number.Which port umber of MI 7.1 server i have to give here?
thanks and regards,
rajesh
Edited by: Rajesh A on May 8, 2009 1:48 PM
Edited by: Rajesh A on May 8, 2009 1:57 PM

Hi Rajesh,
You need to give the http port of DOE server.
TCODE : sicf >execute>in the menu "goto"->port information -->whtever is mentioned in service column will give you the port number for DOE server correponding to each host.
Regards,
Liji

Settings for the Client by using NetWeaver Portals

Hi,
is there any document/how-to-guide which settings on the client has to be made to run a Netweaver Portal ???
I need the Browser setting and all the settings which have to be made...
Thanks for helping,
Marielle

Hi,
here are the settings as described in the sap help
http://help.sap.com/saphelp_nw04/helpdata/en/7c/48e93be23c8d06e10000000a114084/content.htm

Can no longer use HP device manager to scan to OCR

Today I tried to use the HP device manager with an HP J4550 all in one to scan a document to OCR. Not only could the scanner not be found, but the HP device manager also crashed... I used to be able to do this prior to upgrading to Lion. Is there a fix somehow or somewhere?
24" iMac with 2.8Ghz Intel Core 2 and 4Gb of ram...OS X 10.7.2. I should add that printing works fine, I can just no longer scan using Photoshop Elements 8 or the HP scanning software inside of the hp device manager..

No I didn't but I finally DID try HP scan instead of Scan Pro in the Hewlett Packard folder located in the application folder and was able to scan to an RTF file with the OCR doing quite well in the process. I haven't done this in some time and perhaps before I also used HP scan to do OCR scanning. Bottom line, I am able to do again what I wanted to do...

How enable my AMD adapter using the device manager

The message that comes up after updating my AMD driver is this:
The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter. Please update your AMD graphics driver, or enable your AMD adapter using the Displays Manager.
I am running Windows 7 Home premium
HP Pavilion DV 7 notebook pc
Intel Graphics 3000
Radeon HD 6490M
please help

I'm new to this
What is the solution?

Changed Permission Settings: "System extension cannot be used"

I was having some weird problems with file sharing on my network recently, so I tried changing around some of the permissions on my drives to see if I could resolve it. For some reason I was getting messages saying I didn't have permission to copy files from one computer to another on my network. This seemed to come on randomly as we have been doing file transfers this way for quite some time now. I looked at our file sharing preferences in the System Preference's and added all 4 drives from my Mac Pro in there and made sure that my username had full read and write capabilities. I then tried logging into my Mac Pro from my iMac, just like I've done in the past, and I was still unable to copy the files. So I removed all the folders and turned off file sharing. I then clicked 'Get Info' for my main Macintosh HD and tried changing the permission settings there. I clicked the option to make my username the owner, and then I clicked 'Apply to enclosed items...' and this brought up a progress bar that I let go for about 10 minutes. Then I got a pop-up error message stating "System extension cannot be used" and had an extension path listed underneath, saying it was installed improperly and cannot be used. This happens an endless amount of times. It seems to be giving me this message for every single extension on the computer. If I hold down enter the pop-ups just keep coming with different extensions listed.
I hope someone with some insight on how permissions work in OS X Lion can give me some advice on how to resolve, and possible the correct way I should be setting up sharing if I've been doing wrong all this time. What strikes me as odd is that I never had any issues with sharing anything up until about a week or so ago, and I can't remember if there were any system updates that I installed that might have something to do with this.
Any help is much appreciated, thanks!

I had this problem recently in addition to my laptop getting stuck on the Apple logo and spinning icon. It took me a long to time to work through it so I thought I would share what I did to make it easier for others.
The best thing to do when having permission problems is to do a 'disk permissions repair'. You can do this using the disk utility app found in your applications/utilities folder. This will attempt to rewrite all the permissions that were incorrectly set. When it is doing this it is common to get a message saying 'ACL...found and not expected...' do not go and delete these files. Its normal for this correction process to take more than 30 minutes, for me it took an hour.
If this proccess doesnt work for you than you can also try a disk repair.
If you can't boot using the normal disk you can also access this program through the recovery boot (holding Command-R of Option at startup), through the safe mode (holding Shift on start up) or through a recovery CD. You can also boot in a terminal type mode but this is a last ditch effort as a misspelt command could do more damage. personally, because I do not know what the commands I am using actually mean, I would recommend talking to a person at apple then using this approach.
Hope this helps

Need to change the Certificate in ACE that is using for HTTPS Management access

Dear Team,
Currently we are getting certificate cannot be trusted error in web browser while we are accessing the ACE through https. So we need to installed the new https certificate for https management connection to ACE for removing this error. We do not want to use the self signed certificate for https access to ACEmanagement. We have done the below configuration but there no luck, still its showing the previous self signed certificate in browser.
parameter-map type ssl MNGMT_SSL
cipher RSA_WITH_AES_128_CBC_SHA priority 2
ssl-proxy service PSERVICE_SERVER
key ACEKEY.key
cert ACECERT.cert
ssl advanced-options MNGMT_SSL
Kindly suggest how we can installed the certificate on ACE for only https management access.
Thanks in advance.
Regrads,
Ranjith

Ranjith,
You may want to see the details and recommendation relatedo to this situation and this bug:
CSCte42757
Jorge

Upgrading db2 connect thin client from v9.1 to v9.5

I'm looking for instructions on how to upgrade the db2 connect thin client CLI and JDBC drivers from v9.1 to v9.5 (latest fixpack). I found note 867976 describing how to update the JDBC portion. I'm wondering if there is an official way of upgrading the CLI client, now that this is normally automatically installed as part of the SAPINST process. We want to upgrade our system from v9.1 thin client ot v9.5 thin client to use the new functionality.
(We have instructions for upgrading from v9 Fat client to v9.5 thin client.)

1.Copied new driver version into db2_clidriver and jdbc folders.
2. Ran db2radm to bind new collection
3. Used sappad to change connect.ini file back to Unix format.
4. Restarted Cluster.
New version working now.

Ipad connecting with vmware view client v5.1. "any way to disable or hide radial virtual keyboard mouse interface as using blue tooth external keyboard"

Issue - ipad connecting with vmware view client v5.1. "any way to disable or hide the vmware view's radial virtual keyboard mouse interface" either in vmware view client settings, hidden cmds, or ipad system settings.
My client is using an external blue tooth ipad metal cover type keyboard and does not wish to have the radial keyboard / mouse visable or floating on desktop when connecting to vm with iPad using vmware view client v5.1.
i was unable to locate any settings or related toggle key/function combo keystrokes under iPad settings under vmware view client, to affect viewability of the radial keyboard/mouse. And can you kill it from service/process on vm instead of ipad? then dont allow service to restart at startup? What is the name of services that enable the radial virtual keyboard mouse - function to work?
Thanks for any and all feedback-
stratman1

I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?

T410 thin client RDP Client Error Windows XP SP3 issue

I've switched out the VMs they were connecting to completely and we're still running into this issue. The next step is switching out the thin clients themselves. Bump if anyone's run into this issue before.

I'm having an issue with 2 of my HP Smart Zero t410 thin clients. They each RDP into an XP SP3 virtual machine hosted on a virtual server running VWWare ESXi 5.0.0. Randomly in the morning they'll both disconnect from their virtual machines. Sometimes at the same time, sometimes not. I'm monitoring both the thin clients and the virtual machines with software that pings everything 30 seconds, nothing ever drops a ping. I've tested the wire, the wire is good. I've made sure the thin clients are up to date with the latest firmware. The last thing I've tried is replacing the switch both of these machines are connection. One thin client comes up with an error message "RDP Client Error: Reboot Necessary" then below "The firmware has experienced a critical error. Please reboot this client." After I close the error I can RDP back in. The other thin client also gives an "RDP Client Error" and down below mentions MANTICORE but I did not write down the entire error message. I have 30 other t410's deployed at various locations, all connected via RDP to a Windows Server 2008 R2 terminal with no issue for over a year. These last two have maybe in for three weeks and have continuously thrown this error randomly. Any help is appreciated.

Use of SQL*Loader and Thin Client

I have a java application that is currently using the thin client. For portability issues, I am unable to use an OCI driver. My application also uses SQL*Loader.
My big issue is that The Thin client requires the HOST and SID for a connection.
But, for SQL*Loader to work in a client/server environment it needs to use the SERVICE_NAME and net8. Is there any way to have SQL*Loader use similar information that the thin client is using?
I know the right solution is to use the OCI drivers, but right now that is not feasible.
Thanks for any help in advance
Jeff McNurlan
Navigation Technologies.

I assume you are using an ObjectInputStream. Without seeing your code or a snippet I can't be certain...
The JDBC spec says the following about ObjectInputStream :
"An ObjectInputStream deserializes primitive data and objects previously written using an ObjectOutputStream"
Since there was nothing written by ObjectOutputStream, ObjectInputStream has nothing to deserialize and this exception would be raised.

Wyse Thin client not connecting to Windows 2008 R2 server

Configuration
SBS 2011 Server
Windows 2008 R2 server with Remote Desktop Services installed, License Manager installed.
WYSE WT3125SE thin clients with Windows CE 5
I setup the Windows 2008 with Remote Desktop Services and was able to successfully connect the Thin client. Then I installed the License Manger and applied my Open license using User Cals. Was able to login. Next day I get the following
error-"Because of a security error, the client could not connect to the remote computer. Verify that you are logged onto the network and then try connecting again" I still can connect fine from other machines even Windows Home Ed.
I remove license server and still was unable to connect. Built a second Windows 2008 R2 server with RDS on it. Was able to connect without issue. Pointed it to the first RDS server license manager and have still been able to connect with
the Thin Client. The thin client can rdp to the SBS server without issue in admin mode, can connect to RDS2 server but not RDS1 with the license manger. So my issue is with the license and so my question is what is it with the license server
running on that server that is keeping thin client from connecting. I even did a reload of RDS1 and tested connecting throughout the process and it worked up until I applied the license and then it stops. And then if I uninstall the license, rds, remove
from domain still not able to connect. Any help would be appreciated.

We had the same problem with older terminals after cloning a 2008R2 rds server and sysprep it.
The original rds server worked fine but when the old terminals connect to the new 1 they come up with the error : Because
of a security error, the client could not connect to the remote computer. Verify that you are logged onto the network and then try connecting again"
After reading all of the postings about this issue and tried the reactivate solution of the license server,
I was sure that it had something to do with the x509 certificates that are generated the first time you connect to a valid license server.
What I did, I installed a new license server activate it but did not install licenses on it.
I pointed the defective rds server to the newly installed license server and deleted the following registry keys:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM
Certificate
X509 Certificate
X509 Certificate ID
X509 Certificate2
Then reboot.
After the reboot all old terminals can connect fine again. As final step I pointed the rds server to the same license server as the other ones,
reboot and all worked fine.
So conclusion is that when you pont a rds server to a license server that has the new type of licenses on it it will generate the wrong x509 certificates
that are not supported by the older clients, by pointing it first to 1 without any rds calls on it, it generates the older x509 certificates which are compatible with the older rdp clients then the switch to new license server will then not regenerate the
x509 certs so it keeps working.
I hope this helps someone
This issue was driving me crazy so very happy that it is resolved now
Cheers Frits

Changing Connection Settings on Thin Client T410 using HP Device Manager

Similar Messages

Maybe you are looking for