Changing Contact Person for Sold-to-party

Hi Experts,
i am having requirement like i have a order number and for that order number i have to add contact person for sold-to-party please can anybody help me..?

You could do the following
a) Extract the partner from CRM_ORDER_READ through the exporting parameter et_partner.(Check the exporting parameter)
b) Manipulate the partner data you had extracted in step a)
c) Pass the data to the importing parameter IT_PARTNER in the CRM_ORDER_MAINTAIN.
I think this should work.
Regards
Kavindra

Similar Messages

  • Bapi or FM to create,change and delete Contact persons for vendors

    Dear Experts,
    We are replicating the Contact persons details from SUS(SRM) to ECC, When a Contact person is create,changed or deleted the data should be replicated in ECC. We are doing custom development to do this, I need to know is there any function module or Bapi which I can use to create , change or delete the contacts persons for a vendor.
    I tried using BAPI_ADDRESSCONTPART_CHANGE, BAPI_ADDRESSORG_SAVEREPLICA for changing but its doesn't covers few fields like time zone etc. For deletion I tried  WY_KNVK_SINGLE_DEL_FROM_BUFFER its too not helping me .
    Please let me know is there any bapi or fm to do these process or we can go for BDC.
    Thanks & regards,
    Santhosh.R

    Hi Santosh,
    Can you please tell me what Business Scenario is asking you to consider the Time Zones .
    If you know the Customer Number you can very well get the country and there are various FM's to get the time zone based on a country .
    Now Call the FM (as wrote by you ) based on the TIme Zone condition,
    Please enlighten me if i am incorrect.
    Thanks
    Sri

  • Master data Lookup missing for sold to party

    Master data Lookup missing for sold to party?
    The look up flow is from E_BOM to E_BOM1
    regards

    Hi,
    Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
    Hope this helps...
    Rgs,
    Ravikanth.

  • Sales Order Error No customer master record exists for sold-to party

    Hi,
    I am trying to create a sales order in IDES. Unfortunately it is showing me error: No Customer master exists for sold to party. Now I have already checked my assignments, combined sales area in vor1 and vor2. Checked PDP ( In PDP I have creates partner functions as z2, z5, z6, z7). I have also checked in XD02 and XD03 and in partner function tab it shows as maintained. Please help as I am still not able to create it.

    Dear Phanikumar,
    I am not sure whether we can create a customer for a future date or not.
    I might sound absurd but suggested this solution because I had faced a similar issue while I was working on a remotly supported IDES server which I was using for practice purpose.
    Now the case was that, I had created some customers few days back, lets say on 01.03.2014 and today the administrator of the server changed the date & time of the system from 11.03.2014 to 11.03.2013 bymistake.
    Hence when i was trying to create orders for a customer created on 01.03.2014 i was not able to do so as the system was throwing an error customer does not exist.
    I am sorry if I have suggested something awkward or wrong, intention was to provide a solution.
    Please correct if I have suggested someting wrong.
    Thanks,
    Kishor

  • Contact person for Business

    Dear Skype team, we would like to know contact person for business purpose. we are interested to work together with skype .
    thank you

    Hi, Higumaisme, and welcome to the Community,
    Please see this:
    Using Skype in your business
    Transform the way your business works with cost effective and collaborative tools.
    Contact our solutions team
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • How can I maintain more than one contact person for a supplier

    Hi
    As per our business requirement , How can I maintain more than one contact person for a single supplier in SRM?
    How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier.
    we are in SRM 7, and currently we are creating contact person throug customised BDC.
    please advice.
    Thanks & Regards
    NITIN
    Edited by: nitinkk on Sep 9, 2011 10:22 AM

    Dear Yaniv,
    Thanks for your information,
    I am able to create  users But my problem is How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier ? Is there any kind of maping is available for the user/ contact person to the supplier no.??
    Thanks & Regard
    NITIN

  • CRM orders with error "Do not enter a business agreement for sold-to party"

    Dear SDN'ler,
    after creating orders in SAP CRM via ISA (CRM 4.0) and uploading them to R/3 all orders are created successfully in R/3 but an error message is sent back to SAP CRM in case of ALL orders.
    Error message is the following:
    "Do not enter a business agreement for sold-to party xyz"
    Message no. CRM_BILLING011
    Diagnosis
    The field "FI-CA active" is not selected for the sold-to party 6000201 in the business master record. Since the business agreement is used in the component FI-CA, excluding the control of processes, it makes sense to enter a business agreement.
    Procedure
    Delete the entered business agreement.
    ==> Could someone please give me some more information about the mentioned "business agreement"? Where do I find field "FI-CA active" (in R/3 or CRM customer master data?)?
    ==> And how can I eliminate this error message for CRM orders in SAP CRM?
    Thanks a lot.
    Best Regards,
    Rainer Gryschka

    Please check the customising setting under following path:
    SPRO --> Customer Relationship Management --> Master Data --> Business Partner -- > Business Agreement --> Define Basic Settings
    Alternatively you may also check following customisation table using SM30 --> CRMC_BUAG_ACTV

  • Creation of Contact Person for a vendor in SUS, MM SUS scenario

    Hi All,
      We are working on EBP for bidding with SRM 5.0 and ECC6.0 as the backend. When we do BBPGETVD for the vendor root we have to create a contact person for the vendor to logon.
    Our clients requirement is that all the data in the R/3 has to come to EBP including the telephone number and email addresses so that the vendor number should be created as the contact persons userid.
    Is there any way to achieve this?
    Best regards,
    Sridhar.

    Hi,
    Also you dont need to enter any roles while creating the Contact person for a vendor.You just need to enter the employee/user details who will be the contact person for the vendor and after you save all the data ,the CP for the vendor will be created and the system will issue a message "Contact person XXXX for BP yyyyy created".
    BR,
    Disha.
    Do reward points for  useful answers.

  • No POs found when entering with vendor role/contact person for vendor

    Dear colleagues,
    I wanted to post either a GR or an invoice as a vendor, that is, entering the system as the contact person of the vendor, with the vendor role, and searching for the POs created for me as vendor, then selecting one of them.
    However, when searching for POs to post the documents with reference to POs, the report says there are no POs available, when in fact I have created several POs for that vendor in the systems.
    What might I be missing? What are the conditions, rules, configuration steps needed so that the vendor can see the POs created for him and post subsequent documents with the role SAP_BBP_STAL_VENDOR and entering the system as a contact person for that vendor?
    Will award points for helpful answers. Thanks in advance
    David

    Hi David,
    This scenario which you require for receiving P.Os,sending P.O response, posting confirmation and invoice is called
    SUS (Supplier self service) scenario.
    You have to configure this scenario to avail all these services and the vendor should be SUS vendor. A mere vendor role will not allow the vendor to perform all these functions.
    XI (Exchange infrastructure) is required in configuring the SUS scenario.
    Hope this resolves your query.
    Award points for helpful answers.
    Rgds,
    Teja

  • Create contact person for a Vendor

    Hi experts
    Someone could explaim the processes of contact person creation.
    I replicated the vendor from R/3 and now I need to send a BId to this vendor but the sistem ask for a contact person, so I tried go to transaction Manage business  Partner - Employ to Business Partner and tried to create a contact person for this vendor, but when I try to choose a roles for this user no roles is found and is not possible create the user.
    Where can I insert the roles to found when creating the user?
    Thanks
    Nilson

    Hi,
    Also you dont need to enter any roles while creating the Contact person for a vendor.You just need to enter the employee/user details who will be the contact person for the vendor and after you save all the data ,the CP for the vendor will be created and the system will issue a message "Contact person XXXX for BP yyyyy created".
    BR,
    Disha.
    Do reward points for  useful answers.

  • FM to maintain email id of contact person for a customer

    Hi All,
    I need to create a contact person for a customer master using a FM.
    I am able to create a contact person and maintain his last name , first name and telephone using FM SD_CUSTOMER_MAINTAIN_ALL.But I am not able to maintain email id of contact person.Is there any separate FM for this purpose.If anyone has any info regarding this pls help me.
    Regards,
    Raghu.

    Use these fm's in the following order
    ADDR_PERS_COMP_COMM_GET
    loop at <resultant_table>
    <resultant_table>-updateflag = 'U'
    <resultant_table>-smtp_addr = new email
      modify <resultant_table>.
    endloop
    ADDR_PERS_COMP_COMM_MAINTAIN
    ADDR_MEMORY_SAVE
    This works 100 %

  • Hoe to fetch Contact person for a vendor from BP no of the vendor?

    Hi all,
    Cna anyone tell me any FM  /table where i can find the contact person for a vendor once i pass the vendor business partner no ?

    check function module --> BUPA_CENTRAL_READ_DETAIL , BUPA_CENTRAL_GET_DETAIL
    and give partner number --> as input , once you run the same --> ES_DATA_PERSON , should have the contact person details..
    Edited by: khan voyalpad usman on Nov 1, 2008 12:13 PM

  • Contact Person for org unit

    Hello,
    ECS 5.0
    Trying to find a place to maintain contact persons for organisational units. Any ideas where that is done?
    rgds
    GAR

    Hi,
    You may try the transaction BUA1.
    Regards
    Mick

  • Language issue for sold to party in sales order

    Hi,
    we have a sold to party A which is in china. the address for the same is maintained in local version and inetrnational version while creating customer master for A.
    we aslo have a sold to party B, which is in Greece. the address for the same is maintained in local version and inetrnational version while creating customer master for B.
    now we logon to sap and the language we select is Italian. we then go to t code Va01, then the first screen shows everything in Italian which is ok. we then enter order type and sales area. we then go to next screen and enter the sold to party A and we press enter. now the issue is the address against A is shown in chinese characters and not Latin ......... why so ??? we need the characters to be shown in latin and not chinese ?
    if we make a sales order for sold to party B ( logged into sap in Italian language), then the address appears in Latin and not greece ..so this is ok !
    but my question is why this is not happening for sold to party A ???  what settings i need to check in customer master and other settings. In fact how the language management works ??? and how we maintain the local and international version ? . can someone explain by taking my above example and also give possible solution to my question above for sold to party A
    regds

    Hi,
    A cutomer displaying  address in chinesse, even if you loging through Italian language,
    I think reseon for this is you had created customer master in chinesse language,
    Kapil

  • ELM 1:N Can we Map Multiple Contact Persons for an Org

    I want to upload Multiple contact persons for an organization.
    Using ELM Mapping tool can we map multiple contact persons for an organization?
    orgID  name  persID  Name   CP_FUNCTIONKEY    CP_FUNCTIONNAME
    9          abc     9          Pers1             01                            Head of CAD
                          9         Pers2             02                            Head of Civil
    Thanks,
    Ramesh

    I found the way the mapping file should be.
    Entry 1: Organisation A, Person A-1
    Entry 2: Organisation A, Person A-2
    Entry 3: Organisation B, Person B-1
    Entry 4: Organisation C, Person B-1
    During mapping, the content of the fields ORG_NAME1, ORG_NAME2, ORG_NAME3, ORG_CITY, ORG_POSTL_COD1, POSTL_COD2, and ORG_STREET are used by the system to determine identical organizations within the list. The content of these fields must be identical for all records that belong to one organization.
    Thanks,
    Ramesh

Maybe you are looking for

  • Is there a way to open multiple files at once with the new download manager?

    It was possible to do this with the old one by right-clicking and selecting "open", but I haven't been able to find a way to make it work with the new one.

  • What's wrong with my CDATA entry?

    I've succesfully used CDATA in XML for other parts of my site, but have encountered a problem when trying to add a new section using the Bridge CS4 gallery. I'd like to replace the <siteTitle> and <groupTitle> with logos and links, but the browser (F

  • Cannot open files while printing

    Does anyone know of a reason why when printing a large pdf (say around 100+ pages) i cannot open another file in the same program? The only way i have found around this is to: open one file to be printed in Reader then once the printing process has b

  • Material type for consumable item

    Hi, actualy which material type will be used to create material master for consumable items?

  • Help - After 4 months I still can't activate my ac...

    Hi, Been having a huge nightmare with BT customer support. Moved house in April and signed up for BT phone/broadband package and pre-paid the first year. Was a month after move in before we finally had broadband but all good eventually. Then get emai