Changing COPA Line Items
Friends,
There was a change in the sales office in December 2006. However, due to some reasons, the change was not carried out in SAP and the COPA documents were posted with the old sales office. Now the client wants to change the sales office in the already posted COPA documents. What is the best way to change the characteristic values in already posted COPA documents?
Please advice at your earliest.
Thanks & Regards,
Sameer S. Gupte
Hi,
You can define a new derivation rule in KEDR and run realignment job (KEND) for rederiving the characterstics for already posted documents. KEND - Create realignment run - from the Menu -> Run/Request - Create - realignment request.
For this your Sales office field should be a characterstic. should be careful since system rederives for all the documents posted, if you have not set the conditions properly.
Thanks
Ashok.
Similar Messages
-
Changes in MM02 not reflecting in COPA lin item report
Hi,
In my project during data conversion material was grouped wrongly. We realised it later once we started designing COPA reports. The material is used by seven company codes. The basic material group defined in basic data is used by all company codes while Material group 1,2,3 4 and 5 are used by company specific defined in sales orgs 2 View in MM master(MM01).
I am designing report for three companies by using material group 1,2,3,4 and 5.
We tried changing the material group 1,2,3,4 and 5 for wrongly grouped materials in MM02. But in COPA report these changes are not reflecting. The grouping in report is still as per the data conversion grouping.
Please suggest on how should we rectify our material grouping to reflect in COPA report.
RegdsHi,
in COPA reports characteristics are read from the COPA tables, they are not dynamically derived at the time of executing the report. In the COPA tables oyu will find the characteristic as derived at the moment of posting the line item.
If the characeristic that you want to rectify is in the definition of your your COPA segments - which you can check through TC KEQ3 - then there is possibility to carry changed master data over to past COPA data.
TC KEND allows you change the existing COPA segments according to current master data. However, it will not make changes to table CE1XXXX, where COPA line items are stored, but changes happen on the segment level (CE4XXXX).
This means that you always see the changes in COPA reports that read from segments, but not in line item based reports.
To change your output from line item based reports I see no other possibilty but to make correcting entries in CE1XXXX using KE21N or KEFC.
If you should consider using KEND please read the documentation for "realignment". It can create problems, for example if you have a SAP BW that is delta-updated from CE11XXX. Also your summarization levels for COPA have to be rebuilt after KEND. -
COPA line item report, Number format -output type - object list(ALV).
Hi,
I am preparing COPA line item report. I want to change number format (two decimal place). I did the changes in form level then I did the changes in drill down report as well and saved as save definition.
But changes are not reflecting in- output type - object list(ALV).
Please provide help in this.
RegardsHI
What t-code you are using to write this line item report ? -
Delete of Element in Form for COPA line item report
Hello
I would like to change a form used for a COPA line item report - delete an element, which has been included for years. Unfortunately I got message, that 'You cannot delete, because element xxx is dependent'.
If I insert a new element if have no problems to delete it afterwards.
Can anybody help me?
Thanks in advance.
Best regards
Søren Kirch
LOGSTOR A/SHi,
To my knowledge, you cannot delete the element until you assign the new one in the form if only single element is assigned.
In case anymore element is there, there can be possibility this element is taken into consideration for making formula.
Regards,
Harish -
EXIT to change / add line items during STO PO creation in T.Code ME21N
Hi
Can somebody suggest me a EXIT or a BADI to change / add line items during STO PO creation in T.Code ME21N.
The requirement is as below.
When the user enters a material no ( which has a BOM created in CS01), and presses enter or saves the PO, i need to get the sub components of the BOM and populate them as the next line items.
This is because the user needs to create the delivery with reference to the PO. In the delivery, the BOM material needs to be populated with all the sub components of the BOM.
I tried to do it using EXIT_SAPMM06E_013 in which i am able to change / add the line items in the XEKPO and YEKPO internal tables. The entries are available in the internal table when the EXIT is executed.
But when the PO is posted internally, the item is not changed/added.
Thanks in advance.
Guna.Hi,
Try BADI "ME_PROCESS_PO_CUST".
cheers, -
Summarization of COPA Line items
Hi,
A billing doc with 3 batches is creating 3 COPA line items. Can ywe set this to be only one document for COPA:?
Kindly help.
Regards
KamiHi, Thanks,
Can you please elaborate on the step how to configure that.
regards
Kami -
Display COPA line item report-KE24
Hi Experts,
Do we get the correct COPA line items by using the standard transaction code KE24. Is this report is useful to compare the values of the report KE30 which we define.
Please clarify.
Regards,
RamHi All
I had created sales order( MTO).
Sales Order No 61224069 u2013 50
Sales Order line item 40 created > PR & PO created (MD02) > MIGO > Delivery of Order (VL01N) > Settlement (VA88) >Billing( VF01) > Settlement (VA88).
I have two COPA Document and Material Price updating 2 Time in COPA report.
Please let me know Its Process error Or Configuration error.
If Process -- Please let me know the correct process
If Config -- Please let me know where to check
Thanks In Advance. -
Change of line item amount in miro
hi,
i have a doubt on the change of line item amount field value at PO reference tab in MIRO.
1) when vendor invoice price higher than PO, although knowing that the price is incorrectly quoted by vendor, we need to change the amount in PO reference tab line item according to invoice?
2) the difference in point 1 will hit stock account (map) or price difference.
3) when vendor later on give CN, we need to do subsequent credit.
4) in subsequent credit, need to create with reference to PO.
5) we need to change the amount at PO reference item line according to CN?
thanksHi,
1) when vendor invoice price higher than PO, although knowing that the price is incorrectly quoted by vendor, we need to change the amount in PO reference tab line item according to invoice? --- Yes you have to change it to Vemdor invoice amount
2) the difference in point 1 will hit stock account (map) or price difference. --- Yes
3) when vendor later on give CN, we need to do subsequent credit. -
Yes with ref to PO
4) in subsequent credit, need to create with reference to PO. -
Yes
5) we need to change the amount at PO reference item line according to CN? -- yes.
Other Option
You can use invoice reduction - System will create Inoice and credit memo in the same document.
SPRO Steeting require :
1. G/L account should be assigned to RKA trnsaction ket in OBYC.
2. Document type KG should be defined in Transaction code MIRO in customizing for doucment type invoice verification / Valuation in SPRO.
3. Number range should be defined for Doc type KG.
Regards,
Shailesh Mackwan -
PO printout is not coming after changing only line item Delivery Address
Hi
Can anybody suggest a solution for the problem?
Using ME22N , if I change the line item delivery address details to the already generated manual address number ( Not generated using Transaction MEAN)
If I save the PO then PO Printout is not coming but output message log showing " No print-relevant changes to document XXXXXXXXX exist"
We can read CDHR and CDPOS table for changes .
Is there a way to pass the parameter to the print program to Print the changes?
Thanks
sanath
Edited by: sanath kumar sarvepalli-venkata on Nov 2, 2010 11:23 PMHi,
In IMG - Materials Management- Purchasing-Messages - Fields relevant to Print out of changes
Enter Table EKPO , Reference Field LOEKZ, tick on change print relevant for purchase order,in routine enter 03.
Now your Output will be triggered with a change indicator and you can process it using ME9F.
Regards
Chandra Shekhar -
How to change the line item storage location during the sales order creatio
How to change the line item storage location during the sales order creatio
Hi Kumar,
I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
Regards,
Rachel -
How can create and change PCA line items.
How can create and change PCA line items.
Please tell me the process and t.codes.If you are in version < 4.7 ee then use 9KE0 tcode for passing profict center entries or trasnafer of balances from one profit center to another.
If you are in new GL regular FI entry like FB50 will hold good for account types "S" -
Hi Sapians
I am posting in FI but no line item is posted in COPA Line item. What is wrong.
BukhariHi,
1) Ensure that Cost element is created for the GL Account to which transaction is posted.
2) Maintain PA Transfer structure for the Cost element Created above i.e. Flow of values from FI to COPA (T CODE: KEI2)
Hope this helps.
Assign points if useful.
Regards,
Harish -
Ship to party Jursidiction code change at line item leve in Sales order
Hell Gurus,
Here is requirement for enhancement in Sales order. For determining tax following logic is requird to modify jursidiction code of ship-to party at line item level.
after entering header details and line item, then user exit should be there(which user exit??) and i need to compare countries of Ship-from(Plant i believe) and Ship-to party(customer) if country is same, then jursidiction code of Ship-to party at line item level should be changed with value from Jursidiction code of Ship-from party(plant this value will come from <b>T001W</b>) table. this should happen before save(while entering line items, user may go and check jursidiction code change)
what i need here is which user exit is triggerd ater line item entry, and how to change jursidiction value( i believe we need XVBAP, XVBPA, might be XADRC(Jursidiction code) . if some one provide user exit and logic with structure details then it would be of great help.
hoping to get reply
Thanks in Advance
SivaCan you check in MV45AFZB Include but i am not sure
FORM USEREXIT_FILL_VBAP_FROM_HVBAP.
VBAP-zzfield = HVBAP-zzfield2.
ENDFORM.
FORM USEREXIT_SOURCE_DETERMINATION.
set source
VBAP-WERKS = zzfield1.
set item category
VBAP-PSTYV = zzfield2.
ENDFORM.
*eject
Reward Points if it is helpful
Thanks
Seshu -
Changing Vendor Line item text @ FB03
Hi Gurus,
When running MEB4 (Rebate Settlement) it'll create Accounting Entries that can be seen @ FB03... My problem is how to change the vendor line item text at FB03 upon running MEB4.
Thanks in advanceHi,
You can use FB02 to change the vendor line item text.
Regards,
Vinod -
User-exit that triggers everytime I change a line item and change condition
Hello Experts,
We are encountering an error wherein when we create a return order with reference
to an invoice and we create multiple line items with the same material, the succeeding
line items points to the wrong conditions in the reference invoice. Below is an example:
Original Sales Invoice 3010002390
Line Item No. SKU Quantity Total Rebate Discount Per Unit Rebate Discount
10 100315 10 128.07 12.81
20 106666 10 128.07 12.81
30 100338 10 243.86 24.39
Return Order 1120000402 (repeatedly created with reference to the same sales invoice number)
20 106666 1 12.81 12.81
30 106666 1 24.39 24.39
For Return Order line 30, it should have picked the price 12.81 instead it picked 24.39,
which is the same line item with the original sales invoice.
I am using user-exit 'USEREXIT_NEW_PRICING_VBAP' and it triggers everytime I change the quantity of a line item.
But I tried to change the values in XKOMV and put 'U' in UPDKZ but it doesnt reflect when I view it.
Hope you can help me guys. Thank you and take care!Thanks anyways...
Maybe you are looking for
-
How to use search function in ipod nano 7th generation
how to use search function in ipod nano 7th generation? Cheers thanks.
-
What is the best way to reformat a mini and reinstall Mavericks
What is the best way to reformat a mini and reinstall Mavericks?
-
Can I have 2 partitions on an external HD - One GUID and One APM?
I would like to have backups for a PowerMac G5 and a Mac Pro on one drive - and Will a USB External HD work for Startup Disks? I still can't get my computers to see a clone on my USB powered portable HD
-
My system showing startup disk full. I am using mac book pro retina display 15"
I would like to know how to clean the startup disk. The system showing startup disk is full and not opening files in photoshop and other softwares. I was trying to upgrade OS X Mavericks it required 4.99 gb space. available is 1.99 only. I have conn
-
Regarding ess0001.dat file
Hello All, I am assuming that ess0001.dat file in the Application-> default folder is the one which stores all the data in an Application. Just in case I want to replicate that data in a different App , will copying that .dat fi einto the default l