Changing Critical Duration time unit

Hi,
The Warehouse monitor in LL01 executes well with job run daily.
Now the user's request is to change the critical duration time from Day to Hrs .
Will there be any impact on changing the duration time?
Regards,
Vengat

Nope. There are no issues in doing that.

Similar Messages

Short dump will happen because duration time unit is wrong.

Hello,
I maintained breakdown duration time unit as "TST" which is created in CUNI. System can not convert it to "S", so system will dump when I tried to access this maintenance order. So I want to change this time unit "TST" to "S" or "h". I tried to make this change in SE16 table VIQMEL, but failed. Could anybody tell me how to make this change?
Thank you.

Dear Stephen,
have you changed all unit measurement? VIQMEL is table for notification header and you said that you cannot access maintenance order. so, i think you should check table AUFK, AFKO and also AFIH. for unit measurement in order
Rgds
Edited by: Johan Lief on Apr 27, 2010 5:49 AM

How do i change the duration time on my music

i want to make the duration time on one of my songs shorter but when i
1. right click on the song
2. click get info
3. click options
4. the box turns grey and doesn't let me click on anything
i can see the little thing that says start and stop time but it doesn't let me click it. what do i do?

Repair iTunes Security Permissions
Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. Use the Change Permissions... button grant to your account (or the Users group) and SYSTEM full control of this folder, subfolders and files, then tick the option to Replace permissions entries... which will repair permissions throughout the library. When complete switch to the General tab, click in the Read-only check box to clear it, then click Apply.
If you don't have the option to change the permissions then use the Owner tab and Edit... button to take ownership from an account with administrator privileges. Tick the option to Replace owner on subcontainers and objects.
Repeat with the media folder if it isn't stored inside the main iTunes folder.
tt2

Changing slide duration times in the middle of slideshow

I'm making a slideshow with two different audio files that I've created into a soundtrack using garageband. Each song is about 3:30 in length. Here's my problem: The first song needs to match up with about 10-20 pictures. The 2nd song needs to match up with about 100 pictures. I need this to be one continuous slideshow (versus creating two seperate ones) as it is part of a presentation for a fundraiser and I need it to be timed right. Does anyone know of a way of changing the time between slides in the initial part of a slideshow and then speeding it up in the middle (i.e. 5 seconds for the first portion of the slideshow and then 2 seconds for the remaining portion of the slideshow)?
I'm using IDVD to create the slideshow but if anyone has a better idea please let me know

Hi lb121389
Have you considered creating your slideshow as a QT movie? ....otherwise you may be asking too much of a consumer app like iDVD6. Suggest staying within the following choices when working within iDVD6 slideshow durations:
Click Here
Apple's pro apps like FCP > DVDSP can address the types of modifications you are looking for. Hope this is Helpful and good luck to you.
(3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8) My ichatav AIM account is: SDMacuser1 (Please use Text chat prior to video)

Having a hard time changing the duration times of frames

Hello everyone!
Need your help with iMovie 08.
I'm almost finished with a project. Videos are there mixed with some of my photos with a music background.
The problem is that I'm having problems changing the time duration per frame. For example, I put 3.0 seconds in Photo A, it changes back to 2.7 seconds. This is usually the case for pictures. I made sure that the change is for that picture only but it just won't change.
Your help is greatly appreciated.

That sounds about right if you have added a .5 second transition between your photos.
Think of it this way...
3 second photo + 3 second photo = 6 seconds
2.7 second photo + .5 second transition + 2.7 second photo = about 6 seconds

Want to manually change Call Duration time on my N...

Is it possible to manually change the call duration to what I want it to be set as.
I used my dada phone while he was away and holiday, and just found out that he wrote down the total call duration before he went away. I have been using his phone and found the paper he wrote it on.
Please help.

Answered elsewhere. Please don't multipost the same question.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Theme Duration Time Change?

I am using iMovie 6 HD.
I want to change the duration time of the Theme I am using. It defaults to about 6 seconds, but I want to make it longer.
In the help section is says using can change the duration of of Theme, but dragging the one of the edges in the Timeline, but but that does not appear to work. What am I doing wrong.

I have the same issue:
- Chilean gov deffered time change from March 12th to April 28th.
- A complete description can be found at Microsoft, since they have anticipated this and provided a solution:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;2681116
A similar note/patch from apple would be great...

Bulk change activity duration type

Hi All,
Does anyone know how to
bulk change Activity Duration Types.
I would
like to change all the existing Activities in my Project
to Fixed Units/Time.
Thanks<br
/>Munga

Hi Munga,
Select the Duration
Type of the first activity then click on the shift tab
and select the last activity ,right click you shall
find the 'Fill Down'Option.This option shall act
similar to the Fill Cell option of excel wherein the
value of first cell will get copied till the last
cell....
Regards,<br
/>
Pratish Shetty

IPad 3: How can I change the display time in a slideshow?

iPhoto for iPad is a nice App, but I did not find a possibility to change the time a photo is displayed in a slideshow. It seems to be always about 4 seconds. Is there a hidden possibility? Thanks for hints.

It seems to be always about 4 seconds. Is there a hidden possibility? Thanks for hints.
Not with the iPhoto.app slideshows. You could however use the Photos.app to present your iPhoto albums as a slideshow. For the Photos.app you can change the duration for the presentation of slides in the Settings.app.
Settings >Photo & Camera(s) > Slideshow > Play each slide for ....
Regards
Léonie

Is there a way to change the duration of a group of selected clips all at once?

Hi all,
I'm working with good old Premiere 6 on Windows 7.
Is there a way to change the duration of a group of selected clips all at once? If I have a large group of clips in my timeline that are all the same duration, once I've selected them all in a group, can I somehow change the frame number duration of all the clips at the same time?
I've found other things that can be done to a group of clips at the same time, but I can't find a way to change the duration of a group of selected clips.
Thanks,
digi

Thanks Jim and Bill,
In my efforts to work around the problems with the distortion and horizontal interlace lines that come when using the Motion Settings, I'm doing stop frame animation with hundreds and hundreds of layers in PSDs in multiple files placed in hundreds of one, four and six frame sections in Premiere, so if I find that I need to change the number of frames per clip in hundreds of consecutive clips (not actual duration of speed changes), then I need to pull out the right side of hundreds of frames after first moving them apart enough to allow for changing them if I'm making them longer.
These animations are different from the rotating reel animations in that they are for laterally moving subjects that are long streams of moving graphics and photos.
I read about "clip nesting", but I think that only applies to clips or groups of clips that are the same, whereas my clips are each from different imported layers times 125 or so, consecutively placed one after another to create the laterally moving stop frame animation.
Now I've tried johnbmx4christ's alternate method of creating rotations that was just posted on the other thread about the rotation distortion, but that method results in the same oblong distortion and messed up looking horizontal interlace lines.
What a can of worms.
Thanks,
digi

I am trying to change the display time in Captivate 5...

When I try to shorten the length of a slide either in properties or by clicking the end and dragging it, like in Captivate 4, it keeps going back to the original time. Normally I record a demonstration and when I am done adding the effects and the voice I have to shorten or lengthen a slide, but I am unable to do this in CP5. Please help.

Hello,
If the slide is longer than 3 sec you can change the 'Display time' in the Properties panel, General section too. But here you cannot get below 3 sec. Dragging in the timeline allows me to go below 3 sec, but you have first to shorten the timeline of the objects before you can change the duration of the slide. To be sure I just tried again and was able to get to a minimum time of 0.1 sec with that workflow. In the screenshot it is 0.3 sec. If you have FMR, video or audio however the duration of that object will be responsable for the duration of the slide.
Hope it works for you too, cannot explain why it is not possible with the Properties panel, which will show correctly the duration after you changed it with the Timeline.
Lilybiri

How do I change the duration of a still image in iMovie to less than 0.1 second?

I am creating a movie using iMovie where I need the still images to be 0.05 seconds each or maybe even less., but whenever I select the still images and go to "Clip Adjustments" and under duration change 0.1s to 0.05s and select "Done", iMovie changes the duration back to 0.1s. I'm fairly new to iMovie and I've been messing around with it for quite a while now and still can't figure it out. Could someone help me?

AppleMan1958 wrote:
… I have found there is a practical limit of about 3 to 5 frames where iMovie does not want to go shorter when using the Duration popup box.
for stop-motion there are perhaps better tools avail
istopmotion is a commercial app (starting at 40€ in the AppStore) offering additional tools for the animation master, such as onioning or tilt-shift.
http://www.dayofthenewdan.com/projects/time-lapse-assembler-1
is some very basic stills-assembler, stitches stills together only, therefor free ..........

Change slide duration to 2.5 seconds??

Is it possible to change the duration of a slide to 2.5 seconds in imovie08. I keep trying, but it seems to make it go to 4 seconds rather than 2.5. 2 seconds is a little too fast and 3 makes my slide show a bit too long. I have also changed the duration of the transitions, but that makes the transitions too quick, but that I can live with. I would just like to shorten the slides a bit.
Thanks for your help!
Colleen

I would just like to shorten the slides a bit.
Add all your slides at the current default whatever it is. After the last one is added, select it and "Control-click" it to open the contextual menu. Now select the "Set Duration" option, enter the time you want, and the select the option to change all photo durations.

Just bought Photoshop Elements 13...I'm trying to make a slideshow but can't figure out how to alter duration time that the slide is on the screen. They presently move from one to another way too quickly...also need a different pan and zoom option. Wher

Just bought Photoshop Elements 13...I'm trying to make a slideshow but can't figure out how to alter duration time that the slide is on the screen. They presently move from one to another way too quickly...also need a different pan and zoom option. Where are all the options I had in PS10? Also...Can I burn this to a DVD?

The changes have brought improvements but also drawbacks compared with the old slideshow editor.
The templates are now fairly fixed but I find the “Classic Dark” gives reasonable results with some panning and you can click the audio button and browse you PC for any track. Unfortunately there are only three speed choices linked to the music track. The improvement for most people is that you can now export to your hard drive at 720p or 1080p and upload to sites like YouTube and Vimeo.

Why can't I change the duration of a still frame?

I am running Final Cut Express 3.5.1
When I try to change the duration of a still frame it generally snaps back to the existing duration rather than changing. Occasionally it will change but never to the duration I select which is ususlly :20 to :50 of a second. It sticks on a variety of durations between 1:20 and :05. I have tried both altering and rewriting the duration.I have tried restarting as well as all of the following methods:
1 Changing the duration in the User Preferences > Editing, still duration field.
2 Ammending the browser duration column .
3 Double clicking on the still to open it in the viewer and changing the duration field.
4 Draging the still into the timeline, control clicking and changing the duration in the drop down menu.
5 I also clicked on the still in the browser > edit > item properties but there was no timing tab available to select (as suggested on another posting.)
1.25GHz Power PC G4 1MB L3 cache Mac OS X (10.4.9) 80GHz hard drive 1.5 GHz Ram plus Firewire 400 250 GHz la Cie external hard dri
1.25GHz Power PC G4 1MB L3 cache Mac OS X (10.4.9) 80GHz hard drive 1.5 GHz Ram plus Firewire 400 250 GHz la Cie external hard dri
1.25GHz Power PC G4 1MB L3 cache Mac OS X (10.4.9) 80GHz hard drive 1.5 GHz Ram plus Firewire 400 250 GHz la Cie external hard dri
1.25GHz Power PC G4 1MB L3 cache Mac OS X (10.4.9) 80GHz hard drive 1.5 GHz Ram plus Firewire 400 250 GHz la Cie external hard dri

This project is just a short animation so every time I import the stills they are of the wrong duration so I try changing the duration by the other methods described previously, fail to be able to do that, erase everything from the project, restart and start again, initially with the preferences. So there's nothing for the still frames to conflict with. It's not the fact that there is a batch of stills that is the problem either as I keep experimenting with with single or small groups of stills in that context. I've also tried importing a variety of still formats into other projects. This is fairly new software. Could this be an incurable fault?
1.25GHz Power PC G4 1MB L3 cache Mac OS X (10.4.9) 80GHz hard drive 1.5 GHz Ram plus Firewire 400 250 GHz la Cie external hard dri

Changing Critical Duration time unit

Similar Messages

Maybe you are looking for