Changing Currency Type in P&L Report

Hi,
I would like to run the P&L report in USD. When I input currency type as 30 (Group currency), then execute the report I get the following error message: Currency type 30 is not managed in company code ZM01 (error message no. FR822). How do I manage the currency type in the specified company? We would like to run these reports in USD and local currency.
Kind Regards,
Tracy

Dear,
Go through: http://wiki.sdn.sap.com/wiki/display/ERPSCM/MM-IV-GF-CUR+Currency
And check Note 120380 - Subsequent activating multiple valuation approaches
Regards,
Syed Hussain.

Similar Messages

Change Currency Type in Controlling area

Dear Gurus,
We have the following settings in the customizing:
1 - OKKP - Currency Type 20 and Currency key "USD"and flag "Different Company Code Currency is Allowed" set;
2 - Object Currency WBS "10 Company code Currency" "BRL";
3 - OB22 - Currency Type 1st local currency "10 Company code currency -
BRL" and 2nd local currency "40 hard currency - USD";
We would like to change the Currency Type in OKKP of "20 Controlling area currency" for "40 Hard Currency" without modifying the currency key.
That impact this modification can be generate if in the Production System already exists real postings and Settlement to FI-AA?
Thanks,
Elza Silva
Message was edited by:
Elza Aparecida da Silva

SELF Solved.
Regards,
Sharvari Joshi.
Edited by: Sharvari Joshi on Aug 12, 2010 10:44 AM

How to change file type when exporting a report with a background job

Hi,
I've set up a background job in SM36 to execute a SAP Query I've created, set to send the results as a file to an external email address. When it arrives the file is a .htm (and it seems to cut out after a few pages of data), but I'd like it to export as a .xls, .txt or .csv.
I've checked the job, the query and my user settings, but I can't find where the change the file extension used - can anyone please tell me how to do it?
Thanks,
Tim

Hi Shiva,
Can you please confirm where in SQ01/2 the file path information / settings are?
Thanks,
Tim

S_ALR_87012277 Tcode -- Modify Currency type to select-option

Hi,
S_ALR_87012277 Tcode has currency type field, I have a requirement to change Currency type to change selection field. user want to run 10,30,60 currency types same time rather than each currency at a time. Copied SAP program RFSSLD00 to Zprogram and SDF LDB to ZSDF but this program and LDB is looking complex to modify. Is there any simple way to get this get this?
I appreciate any comments on this.
Regards,
Venkat.

No you can t . Program for report is Rfssld00.

User Exit to Change Conditions Type into PO

Hi Experts,
Does anybody know a user exit to change of a condition's currency into a Purchase Order?
I need to change currency type of manually entered conditions, so the user exit should be determinated by specifics conditions types and called up during a redetermination of all or individual price components.
I'll appreciate any information.
Best Regards.
José

Use BADI ME_PROCESS_PO_CUST

Reports not returning records utilizing different currency type.

Good morning,
My company has numerous subsidiaries utlizing CRM On Demand. Although our defauct currency is USD, one of our operations enters opportuntiy data in Canadian dollars. Both currency types are active in the system but for some reason, the custom reports I have created are not returning records created by our Canadian company entering in CAD.
There is probably a quick solution, but so far I have yet to find it! Thanks in advance for your feedback!
Ryan

yes...your report won't show data for canadian currency. even the admins won't be able to see it.
try this fix instead:
you will have to create a new field for currency in the opty page layout and change it to canadian dollar otherwise the currency would still appear as USD in the database.
Then use this field in your reports.
This should help. please let us know your feedback.

Currency type in COPA report

I created a form to generate a COPA report. I selected "both company code and operating concern currency types while creating the form. Now, I need to be able to give the currency type as variable to have the user print the copa report whatever currency they want to print. It's cost based COPA /
How can I get the currency type as selection option? please advise.
Thanks,
Sri

From the form's general selection, select the currency type and define as local variable.

Report on Purchase Order , Currency Type Wise

Hello Gurus,
If i want to display a list of purchase orders , with respect to Currency Type (for eg: INR,USD,SGD,GBP,SEK)etc , how to go abt.
Help is highly appreciated
thanks and rgds

Hi bw,
If you use one of the LO datasources, 2LIS_02_HDR for example, then it has a PO currency. If you upload PO data and have PO currency attribute in your cube then you'll be able to report on POs by their currencies. What's your problem?
Best regards,
Eugene

Currency type option needed for copa report

Dear Experts,
Currency type option needed for copa report.I have checked all the possibilities in ke35 as well.
how to add curreny type in selection screen for COPA reports.
regards
RK

If you want to create your own report with required currency,
T CODE - KE35 - Click on "Report" (create), next window appears
Give the name of the report and description
The u see 2 options
1. Basic report
2. Report with Form
Select which ever you want and press ENTER
Here you need to prepare the report format and fields which are there in the right side box
Hope it helps
Thanks

Display selected currency translation type in BEX webappl report

Hi everybody,
we use currency translation at query runtime. We do not select the translation type in the variable screen but use the possibility with Context menu -> Calculations and Translations -> Global Currency Translation
Everything works fine, the conversion is done correctly BUT I want somehow display the selected tranlation type on the report! Is this possible? As I know there is the possibility in web applications to call a class method at runtime, maybe there exists a function module or class which can return the actual translation type used.
There must be something like that because when I select the context menu "Gloabl Currency Translation" again a second time, the actual translation type is selected in the combo box.
We also need the information on the generated pdf dokuments.
Thanks for any hints!
Regards
Oskar

Dear Oskar,
have you found a way to display the currency translation info in web report? Or could somebody give me enlightment whether this is possible? Thank you in advance.
Best regards,
Mariana

Changing Paper type in Reports 2.5

Hi,
Can we define type of paper in report? I want to set the paper to A4 instead of Letter.
Thanks a lot in advance.
Warm Regards
Vivek Bajaj

Hi,
Thanks for the reply.
I've already defined the paper size as 11" x 8.5 " which is the size of A4 paper. first problem is that when I open the page setup page, neither the orientation is set to landscape (I've coded :orientation := 'Landscape'; in Before Parameter Form Trigger) nor the page is displayed as A4. Although when I print the report the printer prints in Landscape mode but the report is not properly aligned. If I manually select A4 paper instead of Letter the alignment is much much better. As far as I can remember, in 6i or even 6 and 5 versions of D2K, changing these properties usually changes the settings in the page setup page.
Any Suggestions??
Thanks in Advance.
Warm Regards
vivek Bajaj

Currency type is showing up in the report

Hi Gurus,
In one of report results, the currency type is missing and it showing the results as
-5,000.00 *
107,000.00 ERROR
Can some body helps me in correcting the same
Thanks in advance.
Murali

Hi Murali
its clearly due to multiple currency types. try to translate different currencies to one strandard currency, u want to show in the report.
suppose u have a amount KF in which contains data in 3 diiferent currencies(USD,CHF,GBP). now u have to translate these currencies to 1 standard currency type to display the result of this KF correctly.
here you can go to RSCUR tcode and create the translation type to translate the CHF and GBP currency types to USD and use this in the report to show the KF in USD type.
Regards
-Ranjit

Changing the datasource of a Crystal Report to a Oracle DB using TNS

I have a problem trying to change the datasource of a crystal report. In the new connection I want to connect to a Oracle DB using TNS.
Without TNS it's finally working flawlessly with the following code:
     private static void switch_tables(DatabaseController databaseController) throws ReportSDKException {
          // Declare the new connection properties that report's datasource will be switched to.
          final String DBUSERNAME = "user";
          final String DBPASSWORD = "secret";
          final String SERVERNAME = "jdbc:oracle:thin:@1.1.1.1:mysid";
          final String URI = "!oracle.jdbc.OracleDriver!jdbc:oracle:thin:{userid}/{password}@1.1.1.1:mysid";
          final String DATABASE_NAME = "mysid";
          final String DATABASE_DLL = "crdb_jdbc.dll";
          final String SCHEMA_NAME = "SCHEMA.";
          // Obtain collection of tables from this database controller.
          Tables tables = databaseController.getDatabase().getTables();
          // Set the datasource for all main report tables.
          for (int i = 0; i < tables.size(); i++) {
               ITable table = tables.getTable(i);
               // Keep existing name and alias.
               table.setName(table.getName());
               table.setAlias(table.getAlias());
               // Change properties that are different from the original datasource.
               table.setQualifiedName(SCHEMA_NAME + table.getName());
               // Change connection information properties.
               IConnectionInfo connectionInfo = table.getConnectionInfo();
               // Set new table connection property attributes.
               PropertyBag propertyBag = new PropertyBag();
               propertyBag.put("Trusted_Connection", "false");
               propertyBag.put("Server Name", SERVERNAME); //Optional property.
               propertyBag.put("Connection String", URI);
               propertyBag.put("Database Name", DATABASE_NAME);
               propertyBag.put("Server Type", "JDBC (JNDI)");
               propertyBag.put("URI", URI);
               propertyBag.put("Use JDBC", "true");
               propertyBag.put("Database DLL", DATABASE_DLL);
               connectionInfo.setAttributes(propertyBag);
               // Set database username and password.
               // NOTE: Even if these the username and password properties don't change when switching databases, the
               // database password is not saved in the report and must be set at runtime if the database is secured.
               connectionInfo.setUserName(DBUSERNAME);
               connectionInfo.setPassword(DBPASSWORD);
               connectionInfo.setKind(ConnectionInfoKind.SQL);
               table.setConnectionInfo(connectionInfo);
               // Update old table in the report with the new table.
               databaseController.setTableLocation(table, tables.getTable(i));
I just call this method with the DatabaseController from a ReportClientDocument instance.
How do I need to change the connectionInfo to do the connection using TNS?

Please re-post if this is still an issue but first update to CR4E 2 and retest

Update Field On Change For A SQL Query (updateable report)

Hi,
I'd like to request help from anyone with ideas on how to solve this.
We are using APEX 4.2, 10GR2, RedHat5.
I have a report that comes from SQL Query (updateable report).
I'm using the apex_item.text and apex_item.hidden on fields.
I'm using a button to submit and after submit process to add some logic that I need.
There could be 1 - 10 records in the report.
There is only 1 field that is needed to enter a value, but the value of this field determines the value of another field.
I think that I can do this with a submit button and an after submit process where I loop through all the records. I think I have this handled.
This is the question
When the value of that field is changed then the value of another field in the same row changes immediately.
Is this possible?
All the examples I've seen so far are for a single record and that doesn't work for us.
I guess this is a MRU process but I haven't seen an example where a dynamic action is possible on a Multi Row Update.
Could anyone direct me to where I can see an example or help me get directions?
I appreciate all your help an comments and I thank you in advance.

Yes why not...what you looking for is a ajax call
See {message:id=10390979}
Please note:-you can also do this as a dynamic action as shown below
Event: Change
Selection type: jQuery Selector
jQuery Selector: input[name="f01"]
True action with Execute JavaScript Code and put all code inside the test funtion, you may need to amend the code to use this.triggeringElemnt in place of this

How to change data type of attribute in caf

hi.
this is my problem.
i been added a attribute in an entity service called emloyee. named "Birthday", use the data type "com.sap.caf.core.date".
when i tried modify the entity service, i hit exception about "DST Daylight Saving Time".
because of DST, the date will add an hour such like "1957/04/01 00:00:00.0" to "1957/04/01 01:00:00.0", and com.sap.caf.core.date will throw an exception.
is anyone had same problem like me?
how to fixed it(if passable)?
and, how to change data type?
thanks.

Hi Sruthi,
all you need to do on this is open the report go to the parameters, select the parameter that you wish to change and click "Edit". This will allow you to change thefield to a date rather than a date time.
Regards,
Noel

Changing Currency Type in P&L Report

Similar Messages

Maybe you are looking for