Changing date sequence in ical

We have just moved back to England from the USA.
I would like to change in ICAL the date month sequence from the US format, month first followed by date then year,to the European format, date first followed by month and year.
Any help would be most welcome.

Beneto,
Go to System Preferences...>Language & Text>Formats>Region: and set the appropriate region.

Similar Messages

Can I change the Column Name without losing data and change the sequence

Dear Experts,
I want to change the column name without changing the sequence and dont want lose the data.

Oracle Version : ?
Example Based on 10g.
SQL> conn scott/tiger
Connected.
SQL> create table col1 as select * from all_objects where rownum <= 100;
Table created.
SQL> alter table col1 add constraints col1_pk_objid primary key(object_id);
Table altered.
SQL> desc col1
Name                                      Null?    Type
OWNER                                              VARCHAR2(30)
OBJECT_NAME                                        VARCHAR2(30)
SUBOBJECT_NAME                                     VARCHAR2(30)
OBJECT_ID                                 NOT NULL NUMBER
DATA_OBJECT_ID                                     NUMBER
OBJECT_TYPE                                        VARCHAR2(19)
CREATED                                            DATE
LAST_DDL_TIME                                      DATE
TIMESTAMP                                          VARCHAR2(19)
STATUS                                             VARCHAR2(7)
TEMPORARY                                          VARCHAR2(1)
GENERATED                                          VARCHAR2(1)
SECONDARY                                          VARCHAR2(1)
SQL> alter table col1 rename column object_id to object_no;
Table altered.
SQL> desc col1;
Name                                      Null?    Type
OWNER                                              VARCHAR2(30)
OBJECT_NAME                                        VARCHAR2(30)
SUBOBJECT_NAME                                     VARCHAR2(30)
OBJECT_NO                                 NOT NULL NUMBER
DATA_OBJECT_ID                                     NUMBER
OBJECT_TYPE                                        VARCHAR2(19)
CREATED                                            DATE
LAST_DDL_TIME                                      DATE
TIMESTAMP                                          VARCHAR2(19)
STATUS                                             VARCHAR2(7)
TEMPORARY                                          VARCHAR2(1)
GENERATED                                          VARCHAR2(1)
SECONDARY                                          VARCHAR2(1)
SQL> column column_name format a30
1 select column_name,constraint_name
2 from user_cons_columns
3 where table_name = 'COL1'
4* and owner = 'SCOTT'
COLUMN_NAME                    CONSTRAINT_NAME
OBJECT_NO                      COL1_PK_OBJID
SQL>
also go through
http://www.dizwell.com/prod/node/65
Message was edited by:
user52

Calendar from Now-Up-To-Date sync wtih iCal and iPhone

I've been struggling to sync my current Now Up To Date calendar with my iphone and I think I have a solution for at least a one-way sync. Here's a copy of my post from another forum. I hope it helps others....
Does anyone else have a better solution?
I've been using my Treo as a go-between for Now Up To Date and iCal with software from The Missing Sync. This seems to work as a one-way sync from NUD to my iCal. I sent an email to them asking for help and here's their reply:
Description of problem:
Hi. I've been trying to use your software to get my data from Now Up To Date (NUD) to iCal so that I can have it on my iPhone. I know you don't support the iPhone, but maybe you can see if my approach is valid at all. I have a profile in The Missing Sync that only uses the NUD conduit. It is able to get any changes to my Treo 700p just fine. Then I made another profile that only uses the Mark/Space Tasks and Events conduits to get that data from the Treo to iCal. Somehow it worked a few times, but not any more. Is my idea a good one? Should I keep trying or give it up?
Steps to Reproduce:
Here's my steps.
1) Profile named NUD Treo. Has active only the NUD conduit, set to synchronize. I run the sync from the Treo and all changes I made in NUD are transfered to the Treo just fine.
2) I change to the profile named Treo iCal. I have slected the two condiuts, Mark/Space Events and Mark/Space Tasks. I have it set to synchronize all categories. When I run the sync from the Treo, it works for a bit, but none of the changes show up in iCal. Even though the items show in the Treo's calendar, they don't transfer to iCal.
A couple of times when I did the transfer I saw a comment "pushing from handheld".... and on those syncs the data showed up. But it doesn't always say that and the data doesn't transfer on thos syncs.
The reply from The Missing Sync's Support:
Hello,
Yes, that procedure should work.
First, update to 5.1.2 if you haven't done so yet. http://www.markspace.com/ftp/missingsyncpalmos5.1.2.dmg
Then follow these directions to have the Palm overwrite the Mac's Address Book and iCal.
http://www.markspace.com/support/kb.php?x=&mod_id=2&id=2878

I've been struggling to sync my current Now Up To Date calendar with my iphone and I think I have a solution for at least a one-way sync. Here's a copy of my post from another forum. I hope it helps others....
Does anyone else have a better solution?
I've been using my Treo as a go-between for Now Up To Date and iCal with software from The Missing Sync. This seems to work as a one-way sync from NUD to my iCal. I sent an email to them asking for help and here's their reply:
Description of problem:
Hi. I've been trying to use your software to get my data from Now Up To Date (NUD) to iCal so that I can have it on my iPhone. I know you don't support the iPhone, but maybe you can see if my approach is valid at all. I have a profile in The Missing Sync that only uses the NUD conduit. It is able to get any changes to my Treo 700p just fine. Then I made another profile that only uses the Mark/Space Tasks and Events conduits to get that data from the Treo to iCal. Somehow it worked a few times, but not any more. Is my idea a good one? Should I keep trying or give it up?
Steps to Reproduce:
Here's my steps.
1) Profile named NUD Treo. Has active only the NUD conduit, set to synchronize. I run the sync from the Treo and all changes I made in NUD are transfered to the Treo just fine.
2) I change to the profile named Treo iCal. I have slected the two condiuts, Mark/Space Events and Mark/Space Tasks. I have it set to synchronize all categories. When I run the sync from the Treo, it works for a bit, but none of the changes show up in iCal. Even though the items show in the Treo's calendar, they don't transfer to iCal.
A couple of times when I did the transfer I saw a comment "pushing from handheld".... and on those syncs the data showed up. But it doesn't always say that and the data doesn't transfer on thos syncs.
The reply from The Missing Sync's Support:
Hello,
Yes, that procedure should work.
First, update to 5.1.2 if you haven't done so yet. http://www.markspace.com/ftp/missingsyncpalmos5.1.2.dmg
Then follow these directions to have the Palm overwrite the Mac's Address Book and iCal.
http://www.markspace.com/support/kb.php?x=&mod_id=2&id=2878

Identifying Changed Dates on Documents in SAP B1

Greetingsu2026I have an unusual request that is somewhat long, very serious, and hope folks can help.
A headquarters customer believes a subsidiary company has u2018made upu2019 dates on invoices for previous billings. They describe the date changes as u2018radicalu2019 but I have not personally seen these invoices as of yet and am waiting a FAX. They requested I go into SAP B1 to see if someone has fabricated or made up or changed invoice dates and who it was. They have some specific large-dollar invoices identified to research. The person under suspect (who is no longer there) was considered an expert in SAP B1, so maybe she knew all of the different ways to change dates around. Being an expert means also she might have used some unusual ways to change dates to the ones she wanted.
Here are some of my ideas to discover this situation, but I hope someone can suggest even more steps because I would like to know every way that this situation can be discovered.
1. Open the AR Invoices and use Data > Change Log and concentrate on dates.
2. Run some SQL to validate document dates and system dates. SELECT T0.DocNum, T0.DocDate, T0.CreateDate, T0.TaxDate, T0.UpdateDate FROM OINV T0 WHERE (T0.DocDate does not equal T0.CreateDate OR T0.TaxDate does not equal T0.CreateDate). The results would show invoices that maybe had their dates changed.
3.Run a Document Journal in the Financial Module. Finance > Financial Reports > Accounting > Document Journal with the u2018Expanded Selectionu2019 of AR Invoices and a date range covering the invoices in question. Then see if the Transaction Numbers are out of sequence.
4. Run a Transaction Journal Report Financials > Financial Reports > Accounting > Transaction Journal Report with AR Invoices. Compare this report to Document Journal.
5. Run the Utilities functions of Utilities > Check Document Numbering to see if there any anomalies there in the document numbers.
6. Run the Administration > System Initialization > Document Numbering function to see if a special series has been set up.
7. Check out the AR Invoice numbering order by running another simple SQL covering a range of the invoices in question. SELECT T0.DocNum, T0.TaxDate, T0.CreateDate, T0.UpdateDate FROM OINV T0 WHERE T0.DocNum > 1583 AND T0.DocNum < 3251 ORDER BY T0.CreateDate. Then see if the AR Invoice Numbering Sequence is not consistent.
8. Check out those documents that are connected to each suspect AR Invoice and their associated dates by using the Target and Base Document icons. For example, if a Deliver Document has dates of January 2007 but the AR Invoice date is September 2006, then someone has played around with dates on at least one of the documents.
9. Get copies of the complete company database before the alleged changes were made and a company database as of today and compare the two contents. Only good if the backups are maintained for a long time.
Here come the questions on the ways I BELIEVE dates can be changed but not sure how to find and need to work on them:
QUESTION 1 u2013 If a person DTWs invoices up into SAP B1, how can I tell that DTW was used to change the dates, the date of the DTW run, and the dates that were changed?
QUESTION 2 u2013 If a person uses SQL to update dates on SAP B1, how can I find out that SQL has been used, the date of the SQL run, and the dates that were changed?
QUESTION 3 u2013 If a person goes out and changes the workstation and/or server Date and Timestamp Properties, how can I find that they did that and the date changes? You can do this on your PC by just changing the month, date, and year in Microsoftu2019s Date and Timestamp Properties.
QUESTION 4 u2013 I know SAP has a policy that no SQL can be used to update databases and/or tables and have been told some customers lost support because they did this. What does SAP do to discover this in their lab?
QUESTION 5 u2013 Are there any notes in the portals to help me find changed dates?
QUESTION 6 u2013 Are there any logs SAP B1 produces that can help identify such changes and how do I find and use them?
QUESTION 7 (and this is big) u2013 Are the other ways dates can be changed on AR Invoices and how would I uncover the way it was done and the needed information of Original Date and Changed Date?
Many, many thanks for any help provided since this is a serious situation. If you can make any suggestions it would be greatly appreciatedu2026
Zal
Edited by: Zal Parchem on Mar 13, 2009 7:31 AM

Hi Zal
If this person was an "Expert" on SAP Business One then the only way they would have changed dates would probably be directly in SQL itself. The best way to determine this would be to hope that they slipped up somewhere and forgot to change a particular date in let's say one specific table.
For invoices, start with the post date, doc date & create date. Then check each of these to the OJDT/JDT1 tables for any discrepancies. Next check the ADOC/ADO1 table for multiple instances on the invoice. If only 1 instance then check the create date, time & user as well as the aforementioned dates between OINV/INV1 & ADOC/ADO1. If multiple instances, check the dates from 1 instance to the next (This will indicate dates being changed in the system).
Next check the same dates against OINM table. If any of the dates do not tally then the SQL was changed directly.
Hope this helps. Let me know if you need further assistance.
Kind regards
Peter Juby

Changing screen sequence in sales order header

Hi Folks
we have a requirement to change the sequence of the screens which appear in sales order header and we need to add an additional custom screen.
Request you all to suggest how we can achieve this functionality.

Hi,
REquest you to take the help of ABAPer and do the modification in standard Program
But instead of creating a new custom tab you can use additional data B tab to cater your requirement. Its given blank in standard so that we can modify as per our requirement .So the same will be reflected in all screen no. 4013
REgards,
Krishna O

No longer able to use + and - keys to change dates or time?

I recently upgraded from an igloo iMac running OS 10.3.9 to a new Mac mini with 10.5.8 (awaiting upgrade to Snow Leopard).
I used to use the + and - keys all the time to change dates and time in iCal, but have been unable to since my upgrade. Has that functionality been deleted, or is there a way to do it that I have just not discovered yet?
Thanks.

Forgotten Passcode or device disabled after entering wrong passcode
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

Why is the date on the iCal icon the 17th July!?

I was amusing a friend recently showing him how the date on the iCal icon changes to the current date when you open it up and he asked an interesting question ... why does the icon show the date as the 17th July when the application is not open?
I had never really thought about it before so decided to search the internet for a reasonable answer ... the following are a list if interesting events which occured on the 17th July (none of which however seem likely to be the reason for the icons date):
1995 - The Nasdaq stock index closes above the 1000 mark for the first time.
1989 - First flight of the B2 Stealth Bomber.
1987 - The Dow Jones Industrial Average closes above the 2500 mark for the first time.
1976 - Viking 1 lands on Mars.
1975 - Russian and American astronauts meet in space as the Apollo and Soyuz spacecraft's dock successfully.
1964 - A new land speed record is set by the Bluebird (driven by Sir Donald Campbell) reaching a speed of 429mph.
1955 - Opening of Disneyland in California.
1936 - Start of Spanish Civil War.
1917 - The British Royal Family change their name to Windsor in place of their German family name Saxe-Coburg-Gotha.
1790 - The first sewing machine is patented by Thomas Saint.
1453 - End of the One Hundred Years War.
I then came across this page on the Apple site ... http://www.apple.com/pr/library/2002/jul/17ical.html ... which gives the obvious answer that the reason for the icons date is simply that the program was first introduced at MacWorld on the 17th July 2002! Simple!

Have you read ?
http://support.apple.com/kb/TS3579

Change Data Capture for XML

We have an XML file being created every week on the mainframe. This file is loaded to Oracle Database. Initially we were performing a refresh of a table, due to business reasons, we need to load only the changes from this XML file to our stage database.
Then, the changes incorporated to the stage needs to be applied to our warehouse database.
Is this possible? We cannot implement Change Data Capture on the Mainframe side.

>
they are not oracle DBs anyway
>
Then why are you posting in an Oracle forum and using Oracle terms like 'change data capture'?
>
3. don't want to serialize my inserts because since I am not sure I can keep up with the insert rate
>
That doesn't even make any sense. Oracle can generate sequence numbers faster than you can use them. Just put a trigger on the tables.
You need to provide an example and explain how the data gets into a DB and how it gets out.

Changing date and/or time of photos

I often change the time of individual iPhoto pictures to change their order in the photo Library.
I change the date and or time in the information section. I have iPhoto sort the photos by date.
I just imported about 1200 photos from a DVD and want to change the order of some of them, but when I change the time, the new time stays there, but the photo either does not move or moves to the incorrect place. I have closed and reopened iPhoto and even restarted the computer.
I would appreciate any help or suggestions.
Thanks in advance.

Try using the Photo menu ==> batch change date and time (if the photos either do not have a data and time or they are not in the date time sequence you want or the adjust date and time (if you want to add a constant amount to all photos selected keeping them in the same date/time sequence but with a different date and time - and select the change the original option
LN

IPhoto v6.0.5: Import results in incorrect file date sequence

"Undo" is ghosted after importing a pix file set that is ultimately inserted out of correct date sequence. Keystroke "Control-Z" doesn't work either

dblatch:
Welcome to the Apple Discussions. You can edit the Rolls date in the Info window at the bottom of the Source pane. If the image file dates are wrong you can select them and use the Photos->Batch Change to change the date, adding a selected number of seconds, minutes, etc. between each photo if desired.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

How can I change dates on photos in Elements so I can control order of photos in album in adoberevel

I have some of my photos in adoberevel albums, and have learned the only way to change the order of those photos in those albums is to change the date or event in my Elements 9 library. I'd prefer to work with changing the photo date, but don't know how. Can anyone help me?
Trish

Jon, Thanks for responding. I have only the "free" cloud uploads allowed on Revel, so they were uploaded automatically some time ago. When I first looked at them, they appeared to be a total disaster and I decided not to look again, and was happy to keep my images on my computer in Elements 9. But looking yesterday (someone had contacted me about images of my art), I found things looked better. The only problem is the sequencing of the images, and from what I read on a Community thread is that I have to change either the dates or the events. Well, today I saw how to change the dates on Adobe (only did it with one photo as a test), but that ____ so far___ has not changed the sequence in Revel. So, I will close and re-boot my computer to see if that makes a difference, and get righy back to you. Thanks again for responding!
Trish

Data sequence to niUSRP write Tx Data

Hay all,
Currently, I'm trying to develop 802.15.4 system. I have a few question about the data sequence that being fetched into niUSRP write Tx Data.vi.
The vi (niUSRP write Tx Data) accepts IQ data from modulation block, What is the sequence for data that is being transmitted? For example, bitstream is modeled as array, which array[] is tranmitted first? The LSB, or the MSB.
The standard itself (802.15.4) specify that the least bit (C0) is transmitted first.
Thank you.

my TICC2530 has been sucessfully detected the signal, but the decoding still messy.
And I have problew, because
"niUSRP Write Tx Data (CDB Cluster).vi<ERR>Underflow: the Tx buffer was emptied before new data was provided. Consider reducing the IQ rate, increasing the Write rate, or increasing the number of samples per Write."
I already tried to change the registry, as mentioned in here Increasing-write-rate , but, I still have the problem, when I run the IQ rate > 4M and samples per symbol 4. Hence, the CC2530 won't recognize the signal, if I set the IQ rate to be 4M. This in the constelation for my custom OQPSK half sine pulse (4M, 4samples/symbol, Symbol rate 1M)
and my CC2530 will recognize the signal if I set the IQ rate 8M and samples per symbol 8, here is the constelation diagram
So, my question is, how to handle the error?

How to get changed data in ALV in Web Dynpro for ABAP

METHOD on_data_check .
DATA:
    node_spfli                          TYPE REF TO if_wd_context_node,
    node_sflight                        TYPE REF TO if_wd_context_node,
    itab_sflight2                        TYPE if_display_view=>elements_sflight.
node_spfli = wd_context->get_child_node( name = if_display_view=>wdctx_spfli ).
node_sflight = node_spfli->get_child_node( name = if_display_view=>wdctx_sflight ).
CALL METHOD node_sflight->get_static_attributes_table
    IMPORTING
      table = itab_sflight2.
this code is ..get all data(changed and not changed)
but i want get changed data only, not all data.
how to get changed data?
Edited by: Ki-Joon Seo on Dec 27, 2007 6:04 AM

Hi,
To get only the changed data in the ALV grid of a WD, you need to capture the "ON_DATA_CHECK" of the ALV grid.
To this please do the following in the ALV initialization of the ALV table settings :
    lr_table_settings->set_data_check(
            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CELL_EVENT ).
You may also do this:
    lr_table_settings->set_data_check(            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CHECK_EVENT)
The above two ways would depend on when do you need to check for the changed data. If you want to check the data as soon as it is entered, then use the first method. Else, use the second method.
You need to register an EVENT HANDLER for this event.(You may do this in your VIEW or Component Controller).
In this Event handler, you would find an importing parameter R_PARAM which is a ref type of      IF_SALV_WD_TABLE_DATA_CHECK.
The attribute T_MODIFIED_CELLS of this interface IF_SALV_WD_TABLE_DATA_CHECK will contain the modified cells of the ALV with the old & new values.

Can not change data in Input Ready Query

All,
I have created an input ready query on an aggreagation level which has one transactional cube underlying it however, after run the query I am unable to change data in the cells even though I get a warning message saying query is ready for input
Note:
1. The underlying realtime cube is in "Planning Mode:Loading not allowed" state in rsa1
2. I tried including all characteristics so that the record can be uniquely identified at that aggregation level).
3. I am not using any characteristic restrictions
4. I have not set any data slices
5. I have set the property for Planning "Start query in Change Mode"
6. I have set the 'Key Figure' Planning Properties to "Can be changed Manually or via Planning Functions" for the key figures
7. I do not have currency/unit in row/column.
8. There are any locks occurring
Any pointers welcome.
Thanks,
Milind

Hi Milind,
Was wondering how was your problem solved. I get the same message when I run the query in web from query designer and in bex analyzer the cells are not updated with the changes that I make.
I am hitting my head against the wall to figure what could be the problem as my plan query is simply based on aggregation level created directlty upon the real time info cube.
Have cross checked all the points that you mentioned in this post but I cells do not change.
There should be some way around to solve this problem.
Thanks

Can we change data in string object.

Can we change data in string object.

Saw this hack to access the char[]'s in a String in another thread. Beware that the effects of doing this is possible errors, like incorrect hashCode etc.
import java.lang.reflect.*;
public class SharedString {
        public static Constructor stringWrap = null;
        public static String wrap(char[] value, int offset, int length) {
                try {
                        if (stringWrap == null) {
                                stringWrap = String.class.getDeclaredConstructor(new Class[] { Integer.TYPE, Integer.TYPE, char[].class });
                                stringWrap.setAccessible(true);
                        return (String)stringWrap.newInstance(new Object[] { new Integer(offset), new Integer(length), value });
                catch (java.lang.NoSuchMethodException e) {
                        System.err.println ("NoMethod exception caught: " + e);
                catch (java.lang.IllegalAccessException e) {
                        System.err.println ("Access exception caught: " + e);
                catch (java.lang.InstantiationException e) {
                        System.err.println ("Instantiation exception caught: " + e);
                catch (java.lang.reflect.InvocationTargetException e) {
                        System.err.println ("Invocation exception caught: " + e);
                return null;
        public static void main(String[] args) {
                char[] chars = new char[] { 'l', 'e', 'v', 'i', '_', 'h' };
                String test = SharedString.wrap(chars, 0, chars.length);
                System.out.println("String test = " + test);
                chars[0] = 'k';
                chars[1] = 'a';
                chars[2] = 'l';
                chars[3] = 'l';
                chars[4] = 'a';
                chars[5] = 'n';
                System.out.println("String test = " + test);
} Gil

Changing date sequence in ical

Similar Messages

Maybe you are looking for