Changing Default Destination?
I can't find the answer on this one... How do I create a new default destination?
I want to assign one of my extra drives in my G4. I can change the destinations individually; but it'd be nice to have it default where I want them.
Thanks!
Of course you can!
1. Make a Custom Destination in the Presets Window
2. Select the Compressor menu -> Preferences
3. Change the Default Destination to your newly created custom destination
Good luck!
Similar Messages
-
Change default destination of arfc2 model
Hi
With the old JCO arfc connections it was possible to change the default jco destination by passing the application parameter (in the iview) sap-wd-arfc-useSys. So we could use the same WDJ application with different backendsystems... for example the default destination was WD_MODELDATA_RFC, we created a destination WD_MODELDATA_RFCB for a other logical system and set the iview parameter sap-wd-arfc-useSys=WD_MODELDATA_RFC:B (same thing for the metadata connection).
Now, after migrate the application from 7.0 to 7.31 the new rfc model arfc2 is used and we can not switch the destination. To set the application parameter has no effect and the default destination is choosen evermore.
How can we change the default destination of an arfc2 model?
Thanks in advance.
Regards DavidHi Shankha
Instancing the model with "new Model(system, client)" didn't worked for us neither.
But we found a solution with the following configuration that work for us.
set following iView parameter:
"Application Parameters" = rfc_system=X&rfc_client=999
create JCO Destinations as followed:
WD_ELOWF_METADATA_DEST_X999
WD_ELOWF_MODELDATA_DEST_X999
I hope it works also for you.
Kind Regards
David -
Change default upload file destination?
When I upload photo files from a camera card, LR automatically comes up with a default file location under "My Pictures" (Windows XP). I file all my photos on an E: drive and it takes a bunch of mouse clicks to get there. Is there any way to change the LR default destination drive?
This may be OS related. On my Mac OS X 10.4.9, the "sticky" setting is saved between sessions. I just looked.
Now, I wasn't importing from a card. Just deleting and re-importing from a hard drive. But my experience as near as I can recall is that the changed setting for destination is "remembered" from one import to another. -
Changing the default destination file when downloading
when downloading the latest version of itunes i can't change the destination file, this is a problem as the file it is trying to download to no longer exists. i click install, but i can't click on any of my other files to change it :S and when i click change it tells me the file is unavailable then aborts instalation.
thanks in advanceI couldn't understand why this happening.
To make sure change you may see this change in deployment area.
Like <Appserver Install _dir>\appserv7\domains\domain1\server1\applications\j2ee-modules\<yourapplication name> directory
HTH -
Changing Default logical system names of a model.
Hi
How could i change the
Default logical system name for model instances:
Default logical syatem name for RFC metadata:
values for existing model? without recreating the model.
ThanxHi shah kond,
you can change rfc destinations of model in 2 differnet ways.
firs one: right clcik on project
from the context menu select propeties
it will open a dialogbox from that select dynpro references then click on jco references tab
by using add and remove buttons u can add and remove joc destnations
2.expand ur model class double click output class.now seelct properties view.there u can change the jco destination
hope this will use ful for u
Regards
Naidu -
Cannit retrieve DNC 2.0 Default Destination from web.config
I am using ConfigDestination class in DNC 2.0 to access SAP backend systems. The class is overloaded requiring either a Destination name or null parameter. If I pass destination name like: ConfigDestination c = new ConfigDestination("CI0230"), it works fine. All the information is retrieved correctly from the web.config file. However, if a pass a null parameter like: ConfigDestination c = new ConfigDestination(), it does not work. It is supposed to use the Default Destination like <Destinations Default="CI0230"> in the config file. Any ideas how to retrieve teh default destination?
Any help will be appreciated.I found the problem.
The dtd location of the faces-config.xml had to be changed. It was pointing to the schema of 1.1.
With the following faces-config.xml, my application worked perfectly fine.
<?xml version="1.0"?>
<faces-config xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_2_0.xsd"
version="2.0">
</faces-config> -
Change of Destination Type in PO Receipt
Hi All
Can we change the Destination Type at the time of PO Receipt for multiple lines? Users would not like to change the Destination Type one by one for every line which is present on the Purchase Order. Can we change the Receipt Routing on the approved PO before PO Receipt so that we can have all the lines of PO as same Destination Type in PO Receipt.
We are on 11.5.10.2.
Thanks
RajeevYou can override the Receiving Routing on the Receipts screen only if the Profile RCV: Allow Routing Override is set to 'Yes'.
The Receiving Routing on the receipts screen is defaulted as follows:
1. Purchase Order shipment
2. if 1 is null, then Item Attribute
3. if 2 is null, then Vendor Attribute
4. if 3 is null, then Receiving Option -
Define a default destination on CME B-ACD AA
Hi,
we have a CME B-ACD configured with an Auto Attendant prompt menu and then two hunt-group options.
The problem we are having is that when calling from certains old analog phones the system doesn't recognize the inputs ("1" or "2"), so the call is not forwarded to any of the hunt-groups and the Auto Attendant prompt menu keeps playing on loop.
Is there any way to configure a default destination when no option is pressed after a defined timeout?
I attach the config.
Thanks,
Isaac.Hallo Oscar,
when u need calls to be directed to the huntgroup without waiting for the callers input, u need to configure param-drop-through-option, under the the call queing section.
But u will need to change the voice prompt that tells the callers to press a number to reach a call agent with another that has some kind of advertisement.
The voice prompt is to be given a file name "en_bacd_options_menu.au"
Read the "Setting Up Call-Queue and AA Services" section in "Cisco Unified CME B-ACD and Tcl Call- handling applications" .
get the book from this link.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bacd/configuration/guide/40tcl.pdf
check out this configs
application
service queue flash:app-b-acd-2.1.2.2.tcl
param queue-len 10
param aa-hunt1 7597
param aa-hunt2 7598
param queue-manager-debugs 1
param number-of-hunt-grps 2
service aa flash:app-b-acd-aa-2.1.2.2.tcl
param number-of-hunt-grps 1
paramspace english index 1
param drop-through-option 1
param handoff-string aa
paramspace english language en
param max-time-vm-retry 2
param aa-pilot 7599
param max-extension-length 3
paramspace english location flash:
param drop-through-prompt _bacd_options_menu.au
param second-greeting-time 1
param welcome-prompt _bacd_welcome.au
param call-retry-timer 15
param max-time-call-retry 60
param voice-mail 598
param service-name queue
service aa1 flash:app-b-acd-aa-2.1.2.2.tcl
param number-of-hunt-grps 1
paramspace english index 1
param drop-through-option 2
param handoff-string aa1
paramspace english language en
param max-time-vm-retry 2
param aa-pilot 7598
param max-extension-length 3
paramspace english location flash:
param drop-through-prompt _bacd_options_menu.au
param second-greeting-time 1
param welcome-prompt _bacd_welcome.au
param call-retry-timer 15
param max-time-call-retry 120
param voice-mail 598
param service-name queue
since there is no option of choosing huntgroups, u will need to create a second incoming dial-peer for the second huntgroup. in that scenario u will be having 2 pilot numbers each directed to a particular aa service, i.e aa and aa1
Good luck.
Symon -
Don't want iCloud as default destination for Saves.
Since the introduction of iCloud, some of my apps, such as Pages and TextEdit, insist on using iCloud as the default destination for saving a document-- which is something I almost never do. (I like keeping my documents on my hard drive, not on Apple's remote servers, thank you very much.)
This new behavior is annoying, because formerly I could depend on my Save windows to point to the folders I'd previously saved to, so I didn't have to keep navigating back to them. Also, because now the Save windows are collapsed by default, I first have to choose a destination other than iCloud by pressing the disclosure button, then wait for the full Save window to open before I can go to the folder I want.
This is not an improvement, nor a convenience. It is a pain in the ***.
Is anybody aware of a way to return to the previous state of affairs?Oooo !
Just found this on another discussion page:
http://hints.macworld.com/article.php?story=20120820003211714
haven't tried it yet butit may be THE ANSWER
Shame that one has to start tinkering in Terminal to do something quite simple.
Like having to lift the car bonnet to change gear ! -
Default destination folder on upload.aspx
Hi,
Any way to set a default destination folder in upload.aspx without having to change upload.aspx ?
thanksHi Lior,
In that page are two query string parameters that identify in wich List and Folder you will upload file:
/_layouts/Upload.aspx?List={ID List}&RootFolder=My%20Folder
List= Id from your destination list
RootFolder= Destination folder into list (If is in root of list this parameter must be empty)
Regards,
Fabián Páez Sharepoint 2010 MCPD/MCITP - Silverlight MCTS -
How do I change the destination of my photos when I connect my 5s or iPad mini with my pc? I currently have it set to internal memory, and I want to send them to a folder on my pc.
Thanks!The following has some instructions that may help. Note that you didn't say what operating system (Windows 8, 7,Vista, etc) or application you are using on your PC. http://support.apple.com/kb/ht4083
Note that the Windows 7 & 8 section of the above link states in part:
Click the Browse button next to the "Import images to" field and choose where to import your Camera Roll's photos. By default, these will import to the My Pictures folder. -
How to change default unit on Database 11g
Hi All
I'm using Oracle Database 11g Enterprise Edition Release 11.1.0.6.0.
If I define my column:
USERID VACHAR2(8) --> Default USERID VACHAR2(8 BYTE)
How can I change default unit BYTE to CHAR as the following
USERID VACHAR2(8) --> Default USERID VACHAR(8 CHAR)
Thanks alot
Thiensu2810I have set Database system with the following SQL:
alter system set nls_length_semantics=char;
alter session set nls_length_semantics=char;
But, It does not match.
And when I insert data, the following error occured.
SQL> insert into binhtest values('初期化パ');
ORA-12899: value too large for column string (actual: 12, maximum: 8)
I've checked value of NLS_LENGTH_SEMANTICS, it is CHAR
SQL>SHOW PARAMETER NLS_LENGTH;
NAME | TYPE | VALUE
NLS_LENGTH_SEMANTICS | String -
How to change default FCoE QoS class - Nexus 5020
I see that on a Nexus 5020, the default FCoE QoS class is 50%. I am not using FCoE so I would like to adjust this value to 0%. I switch complains and says I can't change default values. How should I go about getting around this to eliminate the FCoE queue and give 100% BW to default? Thanks.
No. The default classloader is a builtin classloader in
the JRE. You can use other classloaders.
The java.net.URLClassLoader is provided in
the JDK. That's the only one. Otherwise you
should subclass ClassLoader and implement
the loadClass method (f.i.
loadClass("my.program") {
String file="my.program".replace('.','/') + ".class";
// find the file in classpath
// read the class file in a byte[]
return defineClass(byte[]);
although this is not the advised way to do it. Search the web for how to implement a classloader directly. -
How to change default thresholds for some metrics of all targets.
Hi!
We have a lot of servers which have to work hard.
So, our OEM very often generates messages like these:
"EM Alert: Critical:dbsora90.tsb.kz - CPU Utilization is 99.95%, crossed warning (80) or critical (95) threshold."
"EM Alert: Critical:dbsora94.tsb.kz - Disk Device c8t60A9800043346C384C344A4A63516D6Ad0(ssd4) is 99.7% busy."
"EM Alert: Critical:dbsora94.tsb.kz - CPU Load (Run Queue Length averaged over 5 minutes) is 20.78, crossed warning (10) or critical (20) threshold."
I need to change default tresholds for mentioned metrics but I can't their defenition in SYSMAN.MGMT_*-tables or suitable settings in OEM GUI.
And I have no time to edit treshholds manually for each target. )Modification of Metric Thresholds (as this is what you are referring to), should be done using the Metrics and Policy Settings link (to be found in the Target Home page).
Don't mess around with the SYSMAN tables!
Best thing to do here is to start using Monitoring Templates for this.
Check:
Oracle® Enterprise Manager Concepts
11g Release 11.1.0.1
http://download.oracle.com/docs/cd/E11857_01/em.111/e11982/toc.htm
Regards
Rob
http://oemgc.wordpress.com -
How to change default output XMLP report to rtf/excel !
I used xmlp 5.6.2
The default output for report is pdf file.
Now i want to change default output to rtf or excel file
Please ! help me !Hi Brightsea,
We customized the code in FNDRSRUN.fmb, But we are not able to get the output in RTF format.
Our requirement is to display the report output in .rtf or .xls(Not required to defaultly as .rtf or .xls).
we are getting the following error.
"The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'http://galaxian.bluestar.cvg0:8000/OA_CGI/FNDWRR.exe?t...
{\rtf1\ansi\deff0"
^
Regards,
suresh.
Maybe you are looking for
-
Transport request problem with a ztable
Hello, I have some problems releasing a customizing transport request. It contains "table contents" of a z table. This z table is marked as "customizing table" (option C). Error message is "task desk900213 belongs to a different category" Thanks.
-
Import statement vanishes while saving metadata
Hi I am facing a strange problem.When I am saving metadata the import statements are erased from the //begin import and // end section in the implementation section of a view.But all packages are present. Pease help
-
Gaming problems with envy m6-1213tx
I bought hp envy m6-1213tx laptop in June 2013. I want to know why do games lag on this laptop inspite of the good specifications. These games do not lag on other brands' laptop with similar or even lower configuration. How do I solve this problem?
-
I am trying to set up my Mac Mini server and can't even get past step 4 or 5 I have inputted my user name, etc. then when I get to the Network instruction I select "Create PPPoE Service' as that is what my Internet provider has supplied me, and I get
-
How to display an Image corresponding to it Material Number.
Dear All, I have a question .. Is it possible to display a Material image .. corresponding to a Material Number in MM01. EX: matn = 123 and for which there's a corresponding material image. How can i achieve this ? Can u please provide me with some