Changing Default Layout Setting - User-specific
Dear Gurus,
This is related to general ALV Layout setting. When we choose Select Layout -> Choose Layout, the default layout setting will show All, is there any way by which we can change this to User-specific Layouts by default? (may be through some parameter id?).
Many Thanks!
Best Regards,
Sree.
Hi ,
Can you explain me your requirement in detail.
Regards,
Rohan.
Similar Messages
-
How to set user specific Layout for executing IW38/IW39 report.
Dear Experts,
We have 10 users seperatly, For executing IW38/39 transaction they have maintained seperate layouts for executing the reports. While saving layout they have saved the layout as 'user specific' Now some body has chage the settings.
After changing the setting all are getting same layout.
Please suggest how to set user specific layout. When user enter the IW38/39 report by default he should get his layout.
Thanks in advance.Create Variant using SHD0 and with Group and assign to particular user's
Here is the steps
Creating a Variant Group
1. Open transaction SHD0, enter the transaction code, and press enter.
2. Choose the Standard Variants tab page, and then the sub tab page Variant Groups, and enter a group name, such as GROUP_GEN
3. Choose Create. Enter a short text on the Maintain Variant Group window that appears and save the variant group.
Assigning Users
Once you have created the variant group and the relevant transaction variants with screen variants, you now need to assign users to the variant group as follows
1. Return to the Standard Variants tab page, Variant Groups sub tab page.
2. Enter the name of a user that you want to assign to this variant group, and choose Assign. A message that this user was successfully assigned to the variant group appears in the status bar. If you choose a where-used list for users, this user is displayed in the user list.
3. However, for the screen variants of the variant group that you created above to be displayed for the user, you first need to select Set Proposal. The user is assigned to the group and the associated transactions are started with the corresponding variants only once you choose the Set Proposal function.
You can use this procedure of user assignment for all other users that you want to add to the variant group
Hope this helps.
Thanks
S.N -
How to do changes in Layouts setting and SAP scripts to meet requirment?
hi SD gurus,
Please explain me how create and work with Z output .
where and how we do changes in Layouts setting and SAP scripts to meet the user requirments.
pls forward func spec of Z output
points will be rewarded
thanx & regardsyou need ABAP skills to do this.
basically you need:
1) draw the layout on a piece of paper
2) define the fields you need and find out the corresponding SAP fields
3) check the document with the customer
4) give this specification to the developer
5) the developer will give you a program name and form name: place them in the message for the document.
Roberto -
Segregation of global layout and user Specific for IW38 with Activity 23
Hi All,
We have issue that users are able to change the Global Layout in IW38 transaction codes, which is causing lot of confusion for other users. Please can anyone help me to do some investigation around how the access to Global Layout and User-Specific layout can be segregated.
We would like to achieve below things:
1) Can we control provision access in such way users can only change layout specific to them?
2) They should not be able to change Global Layout
3) List of roles having Authorization object S_ALV_LAYO with activity 23.
If anyone already faced this issue, can you please let me know how they resolved it
Thanks in Advance.Hi David,
> The standard S_ALV_LAYO object is, so far as I know, no use for normal day to day end users as it over-rides the restrictions?
It's up to the business, but ours wanted the managers to set a global layout for all other users to display only... as sort of a standard report. I agree with you in the challenge of determining who to give the long-term S_ALV_LAYO w/23 global maintenance access. We used to have this S_ALV_LAYO in every role that contained a report access (honest design mistake), hence that is why we created a separate role contained just S_ALV_LAYO w/ 23 access --> to managers only.
In our generic system role that is given to everyone, we have both S_ALV_LAYO (as blank) and F_IT_ALV (as 01, 02) so all non-manager users are able to create/save local layout & still view global layout.
F_IT_ALV activity 70 gives the authority to overwrite other's local layout (the "Manage Layout" access), so we only gave 01 and 02. Be careful here, as giving 03 (display) will make all other activities inactive.
Best,
Alice -
Xml forms not rendered in default layout set - urgent
Hi guys,
I've to display several properties and to provide the rating and feedback service in conjunction with xml forms because a "NewsRenderer" doesn't support the display of additional properties.
So I tried to use one of the default layout sets (e.g. "Consumer Explorer") but the <b>xml forms are not rendered after selecting the "contentLink"</b> (displays raw content of xml document). I'm looking quite a long for a command that opens and renders the xml forms in a new window - without any success...
Please help! TIA
Regards
Joerghi,
you have to create a XMLForms Repository Filter. Check this link:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/21/8df33eef091f39e10000000a114084/frameset.htm">XMLForms Repository Filter</a> -
Change default settings when user share file
When users click on share file default setting is:
Can edit and mark send an email invitation.
Is there possible to change to:
Can view and NOT mark an email invitationHi,
According to your description, you want to change default settings to
can view and uncheck send an email invitation when user share file.
To by default uncheck send an email invitation. Go to the file "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\TEMPLATE\LAYOUTS\AclInv.aspx".
You can change:
<wssawc:InputFormCheckBox
runat="server"
id="chkSendEmail"
Checked="True"
LabelText="<%$Resources:wss,aclver_SendEmailCheckbox%>"
To
<wssawc:InputFormCheckBox
runat="server"
id="chkSendEmail"
Checked="False"
LabelText="<%$Resources:wss,aclver_SendEmailCheckbox%>"
Here is a similar post, you can use as a reference:
https://social.technet.microsoft.com/Forums/office/en-US/f250aa4a-94f0-4603-9da2-e9040d5d6133/how-to-by-default-uncheck-send-an-email-invitation-when-granting-access?forum=sharepointadmin
To by default can view. Go to the file "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\TEMPLATE\LAYOUTS\AclInv.aspx".
You can add the following code into the function _spBodyOnLoad():
document. querySelector('[id$=DdlsimplifiedRoles]').value="role:1073741826";
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support -
Disabling "Default layout setting" in ALV grid display
Hello,
We have a requirement where we need to disable layout default settings in ALV grid display.
Only certain users should be able to save the report layout as default.
We would be creating an authorization group for this and then based on the Authority check we would need to enable or disable Default layout save option.
I found that using I_SAVE in the FM "REUSE_ALV_GRID_DISPLAY", we can either enable or disable layout save option.
But our requirement is to disable Default layout save option based on the authority check.
We will find this option next to User specific option when we save the report layout.
Can anyone guide me on this?
Thanks,
Regards,
AnidHi Anid,
First of all check if you can do this excluding the buttons from the ALV with the excluding tab. If not, here is the code for the ALV OO to exclude the buttons.
FORM F_DISPLAY_ALV.
* Layout
PERFORM f_layout.
* Exclude Buttons
DATA: gt_excl TYPE ttb_button
REFRESH gt_excl.
* Append those you want to exclude. These are some of them. Check Class in SE24 -> Atributes of class cl_gui_alv_grid.
APPEND: cl_gui_alv_grid=>mc_fc_loc_cut TO gt_excl,
cl_gui_alv_grid=>mc_fc_loc_undo TO gt_excl,
cl_gui_alv_grid=>mc_fc_loc_copy TO gt_excl,
cl_gui_alv_grid=>mc_fc_loc_paste TO gt_excl,
cl_gui_alv_grid=>mc_fc_loc_copy_row TO gt_excl,
cl_gui_alv_grid=>mc_fc_loc_move_row TO gt_excl,
cl_gui_alv_grid=>mc_fc_loc_delete_row TO gt_excl,
cl_gui_alv_grid=>mc_fc_loc_insert_row TO gt_excl,
cl_gui_alv_grid=>mc_fc_loc_append_row TO gt_excl,
cl_gui_alv_grid=>mc_fc_loc_paste_new_row TO gt_excl,
cl_gui_alv_grid=>mc_fc_to_office TO gt_excl,
cl_gui_alv_grid=>mc_fc_expcrdesig TO gt_excl.
CALL METHOD gv_alv_grid->set_table_for_first_display
EXPORTING
it_toolbar_excluding = gt_excl[]
is_layout = wa_layout_main
is_variant = wa_variant
i_save = 'A'
CHANGING
it_outtab = gt_alv[]
it_fieldcatalog = gt_fieldcat[]
it_sort = gt_sort[].
Edited by: Ernesto Caballero on Mar 11, 2010 5:59 PM
Edited by: Ernesto Caballero on Mar 11, 2010 6:03 PM -
Default Variant at user specific in FB50,FB60 & FB70
Hi,
I have a created variant in T.Codes: FB50, FB60 & FB70, user wants invisible some of the fileds. This Vairant I have created in configuration(middle in the left side small box) and I used administration selected few of the fileds as invisible and activated. but still all fields are appearing, when I check those fields it is selected as invisible. How can I restrict those fields and I want to use this variant as default at user specific level. Please advise me how can I set as default variant.
Thanks
VS RaoHI,
First you suppress the fields in Field status group and then create variant for those fields.
Regards,
Azeem -
Changing keyboard layout per user
Hello together,
On my Laptop the default keyboard layout for X is US-INTL. That"s what I am using.
Sometimes my friends are using my Laptop, for them I have a seperate user account.
But they would prefer using the germen (de) keyboard layout.
Can I somehow change the keyboad layout during login (using a command in .xsession for example)?
Thansk!
NathanThanks for your reply!
That would work.
But I want to use XDM for login.
I found xmodmap for changing keyboard layout.
But
xmodmap /usr/share/X11/xkb/symbols/de
does not work.
I guess xmodmap needs another filetype. -
Can't save ALV layout as user-specific
Hi!
Whenever I try to save an ALV layout the option User-specific is grayed out, so all variants will be public.
Users would like to save their own layouts safe from other users, as happens with program variants.
First of all then, is there any authorization object related to the User-specific option that my roles are missing?
I read somewhere that 'user-specific' option is controlled by auth. S_ALV_LAYO, ACTVT = 23, yet I have
this auth object with ACTVT = *.
Second, if this option was available, would this let users create their own layouts so that other users don't
overwrite them?
thanks
gracias
xiè xièin the resue FM check the I_SAVE which value are you passing:
Value range
' ' = Display variants cannot be saved
Defined display variants (such as delivered display variants) can be selected for presentation regardless of this indicator. However, changes cannot be saved.
'X' = Standard save mode
Display variants can be saved as standard display variants.
Saving display variants as user-specific is not possible.
'U' = User-specific save mode
Display variants can only be saved as user-specific.
'A' = Standard and user-specific save mode
Display variants can be saved both as user-specific and as standard
variants. Users make their choice on the dialog box for saving the
display variant. -
Oracle Inventory: How to change default category set of items
Hi,
We have a requirement where we need to change the default category set of functional area inventory in oracle as we are importing new items into inventory whihc need to be assigned to a new default category set.There is an existing default categpory set for this area.
As far as i understand once a default category has been set up and an item has been defined, the only way to change the default category set for a given functional area is to update all items with the new default category set before updating the default category set/functional area relationship.
How exactly do we update the defaul category set for an existing item and change it to a new one. Since we have close to 15K items what is the best way to do this.Is there ay API available?
Thanks in Advance
AMHi Helios,
Thanks a lot for your response
The fix given in this document is to allign all the exisitng items to a category set (purchasing in this case). This is exactly what my doubt is. How to assign 15k items to a different category set. If i am able to allign these items i can change the default category of the functional area.
Thnaks
AM
PS: i am using 11.5.10.2 -
Setting user specific contract data while creating sales order using BAPI
Hi all,
I am creating sales order using BAPI - BAPI_SALESORDER_CREATEFROMDAT2.
Now my problem is that there is no structure for contract data (i.e. VEDA), system automatically set contract data using customization values.
I am doing some validations on cotract data in MV45AFZZ which fails, because these validations are performed on standard values, user specific values r not set.
How to handle this issue, your small clue may help a lot.
Regards,
S@meerHI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar -
Change default character set of JVM
Is there a way to change the default character set of JVM to say, UTF-8?
System.out.println("Default Character Set: " + new java.io.OutputStreamWriter(new java.io.ByteArrayOutputStream()).getEncoding());
System.out.println("File Encoding: " + System.getProperty("file.encoding")); On Windows
==========
Default Character Set: Cp1252
File Encoding: Cp1252
On Linux
========
Default Character Set: ASCII
File Encoding: ANSI_X3.4-1968
I would like to save on the effort of changing the many lines of code that looks like
new BufferedWriter(new OutputStreamWriter(out)); to
new BufferedWriter(new OutputStreamWriter(out, "UTF-8")); ThanksTry this:
-Dfile.encoding=utf-8
as vm argument.
/Kaj -
Want to change default border setting for inserted subreports
hi -- When I insert a subreport into a main report, its default borders (all 4) are set to single. I want them all to be
None... and I've read that the default is None. But that's not what I'm getting.
How can I change the default border setting / restore it to what it's supposed to be?
Thanks,
CarolThis has been a development request of mine for years. Currently there is no way to default the borders to None.
-Dell -
OIM 11gR2 Change default query on users manager field
Hi, we are trying to change the default behaviour of users manager field.
When a user is creating another user on OIM, he should only be able to select a particular type of users. So we would want to filter manager field based on a particular user role. For example: just show employees.
At this point, we have checked User.xml searching for the associated query, we have tried to edit inputListOfValues for Manager on Create User form,... but still no idea on how this could be done.
Could anyone point us on the rigth direction on how to achieve this?
Thanks in advance!Karthik Perath
Thanks for the answer....... but I guess you misread the question. I am able to add new fields as columns to the search results table. My problem is I want to add the searchable field to the query form. Also, I do not want to use the Add Fields button (because that is a part of Saved Search which is Personalization and limited only to the creator) , I want the newly added searchable field. for example Employee Number ( which is not there by default) to be made available to all the end users of Identity Self Service system..... Hope you got the problem...
Maybe you are looking for
-
How can I change the interactive PDF font?
I'm making a interactive PDF in inDesign (CS6). Problem is, when I export the file in to a interactive PDF, everything looks good except when I want to type in the text field (interactive) the font is in Times New Roman. I want another font. So my q
-
6500A Plus - Duplex return message paper too short
Just install the new printer yesterday and never managed to print two side (deplux) documents. When enabling the two-sides print mode, i got a warning message on the computer that the media size is too short (french message because of my setup). When
-
Crystal Report Server 2008 - Schedule/Process/History Grayed Out on CMC
Hi - I'm using Crystal Reports Server 2008 (11.5) and am unable to schedule reports - the schedule (as well as the Process and History) tabs are greyed out in the Central Management Console and don't appear at all in Infoview. In addition I can speci
-
When is ORATAB file created during Installation?
DB version:10gR2 When is ORATAB file created during installation. Is it created when we run rootpre.sh?
-
Cfmap with CF9.01 and Google map v3
The information I've seen indicates there is a hotfix for CF9.01 which will allow the cfmap tag to work with Google maps v3. We have installed the latest hot fixes. I obtain an error when trying to use the Google maps v3 API key with the cfmap tag