Changing default Mail message storage location

Hello,
I'd like to start storing my mail messages by default on a wireless enabled HD that I just recently purchased. Is this even possible? I have a desktop machine as well as a laptop that I use around the house. Ideally, I'd like to have identical mail setups on each computer, that way I'm never scrounging around for sent messages or having to switch back and forth to remember which computer I sent a reply from.
What I'm hoping is that if both mail programs are accessing the same message storage destination, then the messages will be the same on both computers. Can this be achieved?
Thank you for your help!

This is what IMAP is for
Theoretically, I suppose you could do it by creating a directory on the external harddrive and then symlink ~/Library/Mail to it on each machine. Might be a little slow over the network though.

Similar Messages

How to change the line item storage location during the sales order creatio

How to change the line item storage location during the sales order creatio

Hi Kumar,
I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
Regards,
Rachel

Change Software Update Service storage location - OS X Server 2.2

What's the best way to change the file storage location used by the Software Update Service in Server 2.2? I don't want to change the default "Service Data" location for the other services.
Generally I like to make as few changes to the standard configuration as possible, but in this case I need to make an exception. I'd really like to to get the catalog of update files on to an External Pegasus RAID.
I've tried using a symlink to the /Library/Server/Software Update/Data folder. That didn't work as the service was unable to update the catalogs.
Should I use a symlink on the whole /Library/Server/Software Update/ folder or is there perhaps a better way?
With any potential solutions, how likely is is that changes I make likely to be overwritten with future updates.
Thanks,
GRW

Question (please use responses in bold in square brackets)
Response
1
Update went smoothly with NO problems [No]
No
2
Update actually solved existing previous problem with server [Not sure yet]
Not sure yet
3
Updated from Server App version 2.2 [Yes]
Yes
4
If answer to Q.3 was 'No' please advise previous server version [Server app version #]
5
OS X version at the time was 10.8.2 [Yes]
Yes
6
If answer to Q.5 was 'No' please advise previous OS X version [-]
To clarify:
1) As it was updating application data, I got an error message at the very end of the update saying that some application data may not be usable/work/wasn't updated (something to that tune) with a yellow triangle and exclamation mark inside it. After the update, I rebooted the server just in case then let everythign start up normally. All services turned on as per usual.
I have gone through most of my services that I run and I'll list off everything that I've tried out and it's state:
Caching Server - Looks OK
Contacts - Functioning so far as expected
Calendar - Functioning so far as expected
Profile Manager - Was able to test a push profile add and delete with success
DNS - Functioning as normal
Software Update - Looking good so far (I had issues with it stopping and restarting randomly with an interval of a month or two between events, hoping that is fixed, though it never affected functionality - it was in the error logs)
File Sharing - Working as expected
Open Directory - No issues thus far
VPN - Looks OK
Websites - Functioning as expected
Hope that helps you guys!

How Can I Change Default Mail Account in Mail Application?

I have 2 Gmail accounts. Gmail1 and Gmail2. When I changed the password of my Gmail1 account - which used to be my default mail account - it changed in the Mail application so that now Gmail2 is my default mail account.
I know that usually you can go
Preferences -> Accounts -> And on the list on the left you can just drag the mail account you want to be the default account to the top of the list. But it doesn't work. It's just not possible to move them around on the list, they are all stuck.
Can anyone help me understand why I can't reorder my mail accounts, or if there is another way to which I can change my default mail account?
Thanks.

Hey wilhel10002,
Thanks for the question. My answer to your question relies on what you determine to be the default account. If it is simply which account is at the top of the list, yes you can re-order the accounts in the sidebar as needed (not from Mail > Preferences > Accounts).
However, I personally perceive the default account as the account that I send new messages from. This behavior can be adjusted in Mail > Preferences > Composing > Send new messages from
Mail (Mountain Lion): Composing preferences
http://support.apple.com/kb/PH11689
Thanks,
Matt M.

Change MRP type at storage location level

Morning,
i am having trouble with PD and ND reporting. Your you are aware ND should only have balances of 0 and PD should only have balances of >0. When i run a reportto show all PD stock and exclude the positive balances, i am getting MM numbers appearing that are 0 in 1 sLoc but have a positive stock balance in another sLoc. This becomes a problem when i change the PD to ND because it changes at plant level. i only want this to be changed at the sLoc with the 0 stock balance.
I have tried MM06 to flag the MM for deletion at sLoc level however, when running the report again, the sLoc with 0 stock balance still shows.
Also, i have about 800+ that need changing so a solution to do this in a batch would also be appreciated.
Please help.
Paul

Hi,
Go to IMG settings 'Materials Management + Consumption-Based Planning + Planning + Define Storage Location MRP per Plant' Enter your Plant, It will show list of storage location in that Plant, then select 2 in 'MRP Indicator' field for storage location for which u want to plan seperately.
Hope It will clear Your Problem
Regards
Sunil Kumar

Default Plant and storage location for components in MFBF

Hi,
I have 2 plants 1000-procurement plant and 2000- production plant. I am using special procurement key 70( Withdrawal from alternative plant from 1000 to 2000) for components in Plant 2000. The requirements for the components are transferred from 2000 plant to 1000 plant. The 1000 plant run MRP for the dependent requirements and procure the materials and transferred to the production storage location in Plant 2000.The raw materials are purchased in plant 1000 and transferred to Plant 2000 production storage location based on the manual reservations created with movement type 301. This is fine.
But when I do backflush in MFBF the plant and storage location for the components issue are displayed as plant 1000 which is the procurement plant and the production storage location in plant 2000-production plant location. In the BOM the production storage location is production storage location of plant 2000. Since we use the special procurement key system defaults the plant as 1000(procurement plant) insteadd of 2000(production plant). can we make this plant default to the production plant 2000 as default in the MFBF goods issue screen.
thanks and regards
Murugesan

Hi MURUGESAN !
      Can you give me some information more in Special Procument Configure in plant 2000 like:
          - Procurement type (maybe F)
          - Special procurement (Maybe U)
          - Plant (Maybe 1000).
          - Issuing plant (maybe 2000)
       We will check together.
       Regards,
      Tony

Warning message: Storage location entries exist

When I run program MMREO050 to ARchive Materias I receive this warning message:
MARC: 0000000000650515 7301 dependet storage location entries exist.
For reference:
650515=article number
7301= plant
And if I check MARC, the article is set for deletion.
Mainly, my doubt is to understand what exactly that warning message means.
Thanks a lot!

there may be stocks exists .please check at MMBE and EKPO table for that material also check MB51.

Mail in iOS 7 changes default mail account after entering addresses?

I just noticed that the Mail app in iOS 7 changes the sent from email address from my default to another account I have after entering in the send to address. When I first create the new email the correct default email address is showing (iCloud) but after I add any send to address it changes to another account (Hotmail) as the sent from account.
I checked my settings and iCloud is still set as the default account, I can click and change it before sending the email but I think this may be a bug unless there is something I missed.
Anyone else have this problem?

Oh, and just to add, whilst under Settings > Mail it does indeed state 'default mail account to use when an application outside of mail attempts to send mail'. However also when you are in the Mail app and on the main screen where you can see all your mailboxes, the Mail App also needs a 'default' account, and in my experience/opinion this is pulled from the Default account within Settings > Mail rather than which ever mailbox is top of the list within the Mail app (didnt work for me!)
But regardless, I have sent an email from an app outside of Mail and the issue is encountered:- I have my virgin.net as my default email (via Settings > Mail). I go into the Photo app, and select a photo to email. My virgin.net email is showing in the From box - so far so good. I select an email address for the To box. My From email address switches to my iCloud.com address. So this is the bug. It should not be doing this. This is the same issue it seems encountered by the original member of this thread. Anyone know how you alert Apple to bugs in their software?

Change default mail program without setting up account

I want to set a different mail application as my default, but my understanding is that you have to do that from within Mail on OSX. Every time I open Mail, it asks me to set up an account, but I don't want/need to set up an account, and I can't get to the prefs window (to change my default mail program) without setting up an account. Help!

Hi, yes, that's one silly thing about OSX, one way around it is a Pref Pane called RCDefaultApp 2.1...
http://www.macupdate.com/info.php/id/14618/rcdefaultapp

Change default error messages

Hello..
I want to change the default error message in apex. for example I wanna change the Not-Null default error message so instead of "Field1 must have some value" I wanna get "Field1 must not be null".
Thanks

Hi Patrick,
It’s an interesting reply, especially as the OP marked it as correct, but still I’m trying to understand something.
As far as I can tell, you can use the translation system only for messages that was defined under a different language from the application primary language. For example, if you are working in English, and you are defining new text messages under English, with new text content, the Application Builder will ignore them as long as your application language is English (i.e. you can’t change/edit the internally used messages of your primary language). So, is this particular text message different?
Thanks,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Changing default save/open to location from any application.

I can't seem to find the location where i can set my files to save to opened location rather then always defaulting to my documents folder. This will apply to files being opened as well. For example when I work in an application and need to import 2o items i do not want to have to start from my documents every time it should default to the last location. If anyone can please help I am having a brain freeze on this one. thanks

PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE!
Please, for the love of all things, will someone please tell Apple to add this feature, I am so incredibly tired of having to go through seven clicks to get back to the same folder that I just saved to.
PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE! PLEASE!

E-61, change default mail box on display

How do I change the mail box showong in the display under the menu line?
how do I add / delete items on the displayed menu?
thanks

You cannot do that.

Changing Default Mail Account?

I have my mail set up with two accounts -- a POP and an IMAP.
I'm trying to use the IMAP account as my primary.
When I compose a new message Mail always defaults to the POP account and I have to remember to toggle the accounts using the "from" box.
Is there a way to swith so my IMAP address shows as the #1 and then I could switch to the POP if needed.
Thanks

Thanks Roam.
All my mail comes through the IMAP account (I have the POP stuff forwarded to the IMAP at my ISP's server). When I reply to a message the "from" is my IMAP address but when I compose a new message the default is my POP.
I tried sending from the IMAP and then quitting but no luck. I also wondered if maybe the order of the accounts in my preferences might be doing something but when I checked the IMAP stuff is first, the POP second.
In time I'll dump the POP so this problem isn't the end of the world but just seems strange. And every so often I forget and use the POP address and then Mail has a bit of a fit.
Always fun!
Thanks

Is there any way to change default mail arrived sound on my ipad2 ?

Both my wife and I have iPads, which both announce 'new mail' with same sound!
I have tried changing all my sound settings to 'Sherwood Forest', but 'new mail' is still the same sound!
Any suggestions?
Mike

Bob,
As my post says, changing to 'Sherwood Forest' did NOT change sound of 'new mail'.
New Mail is still announced with original sound, whatever that is. As this is same as wife's iPad Mini, neither of us know who has new mail. Which is reason I wish to change mine!
Mike

Can this be changed in Mail messages? Light gray color.

When viewing and printing email from my Inbox, the "To" line and the date (upper right on email) appear in a pale gray color.
Am printing email on a Canon PIXMA MX310, and printing in full standard color becaue I need too keep the messages intact as far as font colors, highlights, etc.
Problem is when these pages are faxed and photocopied, the two pale gray areas often come out very light, too faded.
Can it be changed? .
Thanx.
P.S. An example is this cut and paste from this Apple Support Communities page where it shows the "sign out" link. See how pale the "Welcome" is. It is even lighter than that in my email.
Welcome, ParrotPal

I found that they do list in the order you put them on the phone, but when I had to do a reset/restore it placed them into a nearly alphabetical order.
I have found no way to manually change the order nor did my local Genius Bar.

Changing default Mail message storage location

Similar Messages

Maybe you are looking for