Changing default printer settings in SAP Portal

Hi,
When i am trying to print the report in SAP Portal, the default page setting is A3 , i need to change it to 8.5 * 11 inches.
Is it possible??
Thanks
Janc

Hi,
You can change the Page Settings in your Internet Explorer.
File --> Page Setup.
Try doing this.
Are you on BI 3.5 or 7.0?
Also, you are using the Query Designer or WAD ?
In WAD7.0 you can Export the Template with the Query and set the size as A4 or 8.5 x 11 inches.
While viewing the Query designer output also, you select the size. Default is A4.

Similar Messages

  • Change default print settings

    I want to change the default print settings on Firefox 6.0.2 such that the headres, footers, etc. are not printed when I print a web page.

    Firefox button > Print -> Page Setup

  • Change default print settings in PS

    I was wondering if anyone knows how I could change the default print settings so that crop marks and labels are turned on by default.  I've tried using automator, and making an action but haven't had any luck.  Thanks.
    Marcus

    anyone??
    It would also be nice to have a default set of commands under print settings, like paper size, media type, color management, etc.

  • Changing Default SMTP port in SAP Portal/Web AS java 6.40

    Hi all,
    We are configuring notification service in SAP Portal 6.0 with SPS 15. The SMTP server not using 25 port which is default for SMTP. when the server is trying to send notification it is pointing to IP address and 25 port. HOw can I change the default port to custom defined port in Portal/Web AS Java.
    Thanks in advance.
    regards,
    Kishore.

    Hi,
    may be that I’m a little bit to late,  but for the next one who has the same problem the solution could be interesting.
    You can change the default smpt port on Web AS Java in the server parameters of the java virtual maschine.
    Open the SAP J2EE Config-Tool. Goto „cluster-data | instance_<instance-id> | server_<server-id>“. In the tab „General“ insert unter „Java parameters“ the line
    „-Dmail.smtp.port=<port>“ where <port> ist the port number of your smtp server.
    Testet with SAP NetWeaver Portals / SAP NW 04s and SUN Java-VM but should also work with SAP NW 04.
    Greetings
    Jens

  • How do i change default printer settings

    Hi
    I have an Epson Photo PX720WD.
    When I print photos directly from Finder they always print on the A4 plain paper I have in the tray rather than the 6 x 4 photo paper I want them to. The print option in Finder doesn't give me any opportuntiy to select settings like, for instance, iPhoto.
    I don't want to import all pics into iPhoto as i like being able to print them from Finder so does anyone know how I can change the settings, preferably to make the 6 x photo setting the deafult?
    Thanks in advance
    Steve

    Hi Eustace
    thanks for the reply.......I'm on 10.7.5 but I think the issue is that I'm not printing from an App, I want to print direct from Finder and when I select cmd/p or go through the file menu and select print the dialogue box doesn't appear or isn't an option.
    On all Apps that I've printed from cmd/p brings up the dialogue box or going to the file menu the print option looks like this:
    Print....
    Direct from Finder there are no dots meaning no dialogue box will appear.
    I have about 50 pics I want to print so if I can change the default settings then I can simply cmd/p every time knowing that they'll print the way I want them.
    I would also like to change the default settings as I print pics about 95% of the time so it's less hassle to change it when I want a plain A4 print.
    Any ideas?!!
    Thanks again
    Steve

  • How do I change default printer settings in Lion?

    I just got a new MacBook Pro and after installing the correct drivers and setting up my printer, it now prints 2-sided by default.  How do I change this default setting?
    I'm using a MacBook Pro, OS X 10.7.4, printing over AirPort to a KonicaMinolta office machine.  I had this same setup with my old MBP (OS X 10.6.8) with no problems whatsoever.

    Many vendors have started releasing printer drivers that have been defaulted to two-sided (duplexed). I would assume that the printer driver you are using on 10.6 is an older version compared to that being used on Lion.
    There are two possible actions. One is to create a Preset that has the driver set to single sided and use this preset when you don't want duplex. The other is to modify the PPD for the printer so that it is set to single sided by default.
    Making a Preset is easy. Open a document and select to print. Make the changes in the print dialog to set single sided printing and then open the Presets menu and choose to save this change for this KM printer. Then whenever you print to the KM just ensure the Preset is set to whatever name you gave to the single sided setting.
    As for modifying the PPD, this is done via the CUPS web page.
    To access CUPS, open Safari and type
    http://127.0.0.1:631/printers
    This will open the CUPS Printer administration page and will show all the printers currently configured on the Mac. For the printer that you wish to change the defaults for, click its name in the Queue Name column.
    Clicking the printer name will open the printer administration page for that printer. Here you need to click on the Administration drop menu and then select Set Default Options.
    This will show a new page with four menu headings (links); Options Installed, General, Banners and Policies. Select General. Scroll down the list until you find an entry like "Finishing" or something similar that shows the single sided and two sided setting. Change this from 2 sided to 1 sided.
    With the option selected you then need to scroll down the list to the bottom of the page where you will see the ‘Set Default Options’ button. Click this button and you will then be presented with an authentication window. Enter the account name and password that has been set as the admin for this Mac. And then press the Log In button. You will then see another page stating that the information change is completed.
    Now you can open an application and select to print and then check the output is set to single sided.

  • Changing default printer settings

    This may be a dumb question, but I can't figure out how to set my printer to always print black & white as the default. This has caused me to go through tons of color cartridges & I'm tired of it. What am I missing? I used to be able to adjust this all the time on a PC (I cringe saying that...I'm so anti-PC)

    The settings will vary from one printer brand/model to the next. In my Print dialog box (I have a Canon MP 800) there is a drop-down list with a selection called "Quality & Media". Looking at that, I can check off the Grayscale box to get black & white. Yours may be different, but there should be a setting in there somewhere, unless your printer doesn't allow it at all.

  • Changing Permanent Default Print Settings

    Hello All,
    A few months ago, I somehow managed to change my print settings permanently to B&W. I know it wasn't just changed to grayscale through the print menu when I try to print a document. I have a Canon MP470 and am running Leopard OS X. I remember having to go through lots of layers of menus to get it to do this, I just don't remember how I got there.
    A page somewhere on the internet showed step by step how to do this. I can no longer find it. I know my printer still prints color as it will still make color copies using the copy machine function.
    Does anybody have any idea how to undo this?
    Thanks for your help!

    The location of the grayscale setting would depend on which driver you are currently using. There are two Canon provided drivers, a v6.9.3 and a v10.1.2 'CUPS' driver. There is also a Gutenprint offering and there is also PrintFab.
    If you open System Preferences > Print & Fax and select the MP470 in the Printers list, you can check the version of driver you have by selecting the Options & Supplies and looking at the General tab.
    For the v6.9.3 driver, the Grayscale Printing setting is located under the Quality & Media menu. If you selected this and then made a Preset, then that would give you a default b&w option.
    But your post suggests that you changed more than this so I'm not sure what you would have done differently to the above. There is no function to default the printer to b&w via the machine control panel.
    If you want to keep your locked b&w driver you could add another printer queue using the same version driver or the other version driver.
    Or if you want to remove the current b&w driver, then you could reset the printing system and then add a new printer queue.
    PaHu

  • Any way to override default printer settings into a PDF

    Hi -- I work for a large organization that has lots of computers and printers and prints a lot of forms and documents.  We are moving towards more digitization of documents and records including printing forms as needed as opposed to having large sets of forms onhand.  This should save us a lot of time and money once complete as these forms often change and the old process would be to then trash much of these documents and re-print for just one change.  The majority of our printers do have letter & legal trays as well as duplex support, however due to the vast number of users the default printer settings tied to each user and/or computer may be slightly different.  While standardizing all the printer settings across all users/computers would be one solution, we don't anticipate doing this as depending on the job peformed the different settings may be more preferable / advantageous for that user.
    As such the other solution I can think of is to hardcode the specific printer settings needed to correctly print a large document into that PDF file which may differ from that computer's print settings.  For example, the default computer print settings may be to print on just 1 side but duplex would be encoded / scripted directly into the PDF so IRREGARDLESS of the computer/printer settings this document would always print duplexed.
    Is there anyway to do this?  I would need to do more than just duplexing -- ie some form sets would need to be both duplexed and 'fit to printable area' whereas some would need to be only on one page and 'shrunk to printable area', etc, etc.  Our current practice is to insert a 1 page coversheet at the front of each document with the printer settings that need to be used for that form set, however this has been difficult for some users to do and has caused unnecessary time with our IT troubleshooting form printing.
    -Brandon

    Hi Brandon,
    You can use the Print Presets in Acrobat for that purpose. Please follow the steps below:
    1. Open the PDF in Acrobat
    2. Open Document Properties dialog (using Ctrl + D)
    3. Select the "Advanced" tab
    4. In the "Print dialog Presets" section, you can choose DuplexMode as well as Page Scaling for this document.
    Please let us know if this works for you
    Thanks,
    -Shilpi

  • How can I set the default print settings of my document as color.  I want the default print setting to be color when someone opens a document.  similar to duplex print preset is there a color print preset?

    How can I set the default print settings of my document as color.  I want the default print setting to be color when someone opens a document.  similar to duplex print preset is there a color print preset?

    Hi,
    Try saving your settings as a Preset by clicking the Preset drop down and then select Save Current Settings as a Preset.
    Next try changing the settings by selecting the saved preset.
    That allow saving the settings for a specific printer, I assume it may also allow selecting these settings for another printer.

  • Default print settings

    I need to change my default print settings to black and white. I've changed it in the print dialog box to grayscale, but when I print coupons, that box doesn't come up; it just automatically prints in color. My Dell desktop let me change the default print settings for my exact same printer, so it's not a problem with the printer. Please help. Thanks.

    Have the same issue.  Did you get it resolved?

  • Default Printer Settings

    Am just setting up my first Mac. Have connected a Brother 5150D printer which works fine both on Mac and on wireless network but..... as most of my printing is duplex (to save paper) I want to set this as the default and get two-sided printing each time I click the print icon in Office Mac or any other application. I have set up the printer and gone to http//:127.0.0.1.631/printers and set the parameters to duplex - no tumble and set the duplex option in printer preferences/layout. Despite these default settings when I click the print icon it always prints single sided. The only way I can get duplex printing is to click file/print/copies & pages/layout/2 sided/long edge binding and hit print. I have restarted the Mac after changes, recycled the printer, deleted and reinstalled the printer but the icon default seems to remain insistent on printing single sided
    Help please!!

    Hello dgcornett,
    Depending on which printer that you have, the software interface to change the default print settings could vary. You can click the link below to view steps to change the settings on the Photosmart 7510 series printer, which is a recently released printer.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02987938&cc=us&dlc=en&lc=en&product=5070121&tmp...
    If you can specify the printer that you have, more specific steps can be posted.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Security warning while printing PO from SAP Portal.

    Dear Experts,
    We are facing below error while printing PO from SAP Portal.  After accepting the condition and clicking on RUN the pop-up comes again and again.
    Please could you advise the resolution of this. Does any browser setting needs to be changed ?
    Please suggest.
    Regards,
    Arpit C

    Hi Arpit,
    Please try below steps...
    1. Go into the Control Panel
    2. Double click on Java to open the Java Control Panel
    3. Go to the Advanced Tab
    4. Expand Mixed code
    5. Select the option for “Enable – hide warning and run with protections”
    For detailed information, please refer to the article:
    Error : Java has discovered application components that could indicate a security concern
    http://wiki.scn.sap.com/wiki/display/BOBJ/Web+Intelligence+and+Oracle+Java+Runtime+Environment+Known+Issues+in+SAP+BI+4.1
    Regards,
    Prithviraj.

  • When I open E12 to print, the printer settings do not reflect my default printer settings.

    When I open E12 to print, the printer settings do not reflect my default printer settings.  After I change the settings in E12 and print and close, when I reopen E12 the printer settings are back to what E12 originally decided they were.  What am I missing?

    Not on the list for supported printers http://support.apple.com/kb/ht4356

  • Excel 2010 not using the default print settings

    Currently got an issue with Excel 2010 not using the default print settings for a couple of users on our network,
    basically when pressing cntrl P or selecting the print option from the file menu the printer settings are different to the print settings selected in the devices and printers menu, we have checked the print drivers etc but this has still not resolved the
    issue, all other office programs are fine and also other users are reporting this issue more and more with different printers,
    tried restarting print spooler service and re-installing office but this has come to no avail,
    any ideas would be much appreciated!

    Hi,
    This issue occurs because the Page Setup settings that you specify in your file override the settings that you specify in the printer driver properties.
    To work around this issue, do not specify the paper size, page orientation, or page margins in the printer driver properties. Instead, specify these settings in your workbook.
    To specify these settings, follow these steps:
    1.Start Excel, and then open the workbook you want to change.
    2.In Microsoft Office Excel 2010, click the sheet that you want to print, and then click the Page Layout tab. In the Page Setup group, click Page Setup to open the Page Setup dialog box.
    3.Click the Page tab.
    4.Under Paper size, click the paper size that you want.
    5. Click Options button and in Printing Shortcuts tab, in the Paper source area, perform one of the following steps:  ◦If the printer can automatically select the correct paper tray to use, click Default tray in the First page list, and then click Default
    tray in the Other pages list.
    Default tray is the default setting in both of these lists.
    ◦If the printer cannot automatically select the correct paper tray to use, you may have to select the paper tray that contains the paper size that you selected in step 4.
    To do this, click the appropriate paper tray in the First page list and in the Other pages list.
    6.If you want to change the page orientation or its page margins, click the Finishing tab.
    7.Select the options that you want.
    8.Click OK.
    9.Repeat steps 2 to 8 for each sheet of your workbook for which you want to specify settings.
    Jaynet Zhang
    TechNet Community Support

Maybe you are looking for