Changing default safari settings

I want to set up Safari's default settings across multiple computers so that when someone logs in (and they havent set up safari settings before) they will have tabs enabled, status bar shown, etc...
is there any way to do this??

Hi again
I'm gonna be guessing a bit now - but you can easily try this out.....
Take a look at the safari plist by entering defaults read com.apple.safari in Terminal.
See how there's an entry for "ShowStatusBar = " which is mirrored in the file we modified to get the status bar shown by default?
There are also entries for "TabbedBrowsing = " and "AlwaysShowTabBar = "
Now the guess part - If you make new entries in the defaults.plist in the same format as the existing ones, eg
<pre><key>TabbedBrowsing</key>
<true/>
<key>AlwaysShowTabBar</key>
<true/></pre>
I'd put 'em in the correct place alphabetically, just in case.....
You understand, I don't know if this'll work. But worth a try,imo.
Failing that, I'm sure there's some proper information somewhere on http://developer.apple.com/appleapplications/
iMac G5 rev B   (OSX 10.4.7)  2GB 250GB

Similar Messages

  • How do i change the safari settings on my new macbook pro to run in the 32 bit mode?

    how do i change my safari settings on my new mac book pro to run in 32 bit mode please?

    I am running Leopard OS in 64 bit mode. Everytime I want to run my Cisco VPN client I reboot it in 32 bit mode by holding the two keys (don't remember what two keys at the moment).  I am looking for another way to run my Cisco VPN.  I don't see the check box labeled "Open in 32-bit mode" .  The only thing I see is "Open in Rosetta" or something like that.  Is the check box "Open in 32-bit mode" only show in Lion X OS?

  • To change "Default Report Settings"

    Hello All,
    In the interactive report, I am wondering to change “Default Report Settings”.
    Thanks in advance,
    EB NY

    Make sure you're logged into the builder as a developer, pick the columns you want, filters, ordering...etc. When you are done, click Save Report - developers have the option of saving default report settings.
    Again you will only see this option if you are logged into the builder.

  • How to change default browser settings?

    Safari keeps crashing and I can't change the default browser settings. Is there a way?

    I was able to fix the problem with the crashing by updating Safari.

  • Changing default printer settings in SAP Portal

    Hi,
    When i am trying to print the report in SAP Portal, the default page setting is A3 , i need to change it to 8.5 * 11 inches.
    Is it possible??
    Thanks
    Janc

    Hi,
    You can change the Page Settings in your Internet Explorer.
    File --> Page Setup.
    Try doing this.
    Are you on BI 3.5 or 7.0?
    Also, you are using the Query Designer or WAD ?
    In WAD7.0 you can Export the Template with the Query and set the size as A4 or 8.5 x 11 inches.
    While viewing the Query designer output also, you select the size. Default is A4.

  • Modify default Safari settings in WGM

    Workgroup Manager does not appear to have a location to modify the default homepage and Safari settings.
    I am looking for a way to enforce a default homepage and (ideally) with specific cookie settings to enable Google SafeSearch for a user group.
    Is this even possible without replacing plits in every user directory? If so, is there an Apple Script that I can write to automate this?

    It's possible and pretty easy.
    In WGM, when you go to Preferences click on Details. Click the add button and go locate com.apple.safari in ~/Library/Preferences. You'll want to clear out all of the keys except the ones you want to manage. I have HomePage added under Always. I also have WebKitPrivateBrowsingEnabled set to False.

  • Changing default cursor settings

    Hi,
    I need to change the default cursor settings on an xy graph.  Currently the cursor positions itself at the beginning of each data set.  See attached.  You should be able to see the cursor displayed in bright yellow.  How do I change the default conditions for displaying the cursor at the beginning of each data set from say: 04:19:38 PM, 09/28/12, (as in the attached example) to say: 04:19:38 PM, 09/28/11.  I just changed the two digit year - to keep it simple!  Thank you.  John
    Attachments:
    Capture.PNG ‏25 KB

    Hi John,
    It sounds like you may not have your VI updating to show changes to controls when they are changed. I would recommend using an event structure in a while loop to poll for changes to the cursor and update them on the graph. I attached an example I wrote (opens in LabVIEW 2010 and more recent) to show you what I am talking about.
    It is hard for me to understand what you are talking about with the small snippets of your code I am seeing. If you have further questions, please post an entire VI (or a smaller example VI that reproduces the issue) so it will be easier to help you.
    Joey S.
    Software Product Manager
    National Instruments
    Attachments:
    cursor position property.vi ‏12 KB

  • Change Default Import Settings

    This has bugged me for a while now. I have created an Import Preset to import my photos to my "F" drive. Works perfectly but sometimes...the import Preset reverts to the original Lightroom Import setting which imports to my "C".drive. If I right click on my Import Preset, my Import to "F" is checked.
    How can I prevent LR4 from reverting to the default import settings and is there anyway to either remove the old default altogether or make my Import to "F", my default?
    Bob

    I found a previous post that appears to work.  Since the netbook doesn't show an OK in the preference window, I just had to hit enter to accept and change the setting. 
    Thanks to all.

  • Change default print settings

    I want to change the default print settings on Firefox 6.0.2 such that the headres, footers, etc. are not printed when I print a web page.

    Firefox button > Print -> Page Setup

  • Change default print settings in PS

    I was wondering if anyone knows how I could change the default print settings so that crop marks and labels are turned on by default.  I've tried using automator, and making an action but haven't had any luck.  Thanks.
    Marcus

    anyone??
    It would also be nice to have a default set of commands under print settings, like paper size, media type, color management, etc.

  • Change default MIDI settings in Logic.

    Hi there,
    Just bought Yamaha DTXplorer digitals drums. When I record the MIDI part in Logic Pro 8, it doesn’t play the right notes concerning BD, SN and so on. Is it possible to change the default MIDI settings in Logic so it fit to the Yamaha DTX – or other applications?
    Thanks for your help – KGL.

    There is not really any such thing as "default MIDI settings". Logic just gets the notes you play from your controller, and sends them to whatever other instruments you are using.
    Does the DTX not use GM mapping? If not, I'd suggest you alter the notes it sends to be more suitable for your needs.
    You can use Logic to remap notes in realtime (in a variety of ways, using environment transformers or mapped instruments) and this is the more flexible way of doing it, if you are comfortable with environment routing and so on.

  • Change default program settings

    How do I change the default program settings used to open a file?  I accidentally attached adobe reader as the program to open a winmail dat file and now every time I go to open a winmail dat file adobe automatically tries to open it but can't.  I have a program to open winmail files and want to use that as the default. Please help.

    Hello, do a Get Info in the Finder on any winmail dat file, look fot the Open With, choose your APP, then click Change All button.

  • Change default table settings

    How do I change the default table settings in Pages? I usually want 2 columns without headings or borders, and it always defaults to 3 columns with headings and borders.

    You need to create your own default template. Open the blank template & insert a table, click in it & choose the font, size, color, etc. you want in the fonts panel or format bar. You can do similar changes to inserted objects & text boxes. While you're at it resize the box if you want, set the amount of extra space in the wrap inspector, etc. Delete each text box, object & table after you've set them. Now, save this document as a template & select that template as default in preferences. If you decide to make any changes to the template down the road, just Save As Template again with the same name & replace the previous version.
    Now, save this as a template then, in Pages > Preferences, select this template as the default for new documents. All of your new documents will have these settings for inserted objects, images & tables. Unfortunately, the settings won't apply to any other templates or "foreign" documents you open with Pages.
    About the only thing you can’t set a template to do is remember to show invisibles & the window position. It is possible to get a template to show invisibles when opened, if you want. Save this document as a document then, in the Finder, change the extension from .pages to .template & put it in your My Templates folder in HD > Users > (your account) > Library > Application Support > iWork > Pages > Templates > My Templates.Set up your document with the line spacing, margins, headers, etc. as you'd like. Redefine all of the paragraph & character styles to have your desired font.

  • Changing default subscription settings

    Hello all,
    According to <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=37365">this SDN forum post</a> from 2005, it is not possible to change the default subscription settings.
    With EP7, is this still the case?  I can't find any documentation on doing this... so I'm hoping for the best, but prepared for the worst. 
    Thanks in advance,
    Fallon

    Hello Pradeep,
    When I display the 'subscribe' command in a layout set, the user can click it to subscribe to a folder.  However, it uses the default subscription settings automatically when the user clicks that command.  Then the command changes to "Edit Subscription" where the user can modify their subscription settings... but I'd like to be able to control what the default settings are that are taken on that first click.
    Thanks for your reply,
    Fallon

  • Changing default render settings?

    On CS5.
    Every time I render it's reset to the default seetings.
    Is there some way to change the default, or save and easily recall settings?
    Cheers!

    As Mylenium says, using render settings templates and output module settings templates is the way to go. Here is some more information, including how to set your templates as the defaults:
    render settings templates
    output module settings templates

Maybe you are looking for