Changing Default Template ... this must be simple ??

Hi
This must be a simple task ... make a setting somewhere in BW such that the default template is no longer 0Analysis_Pattern, but rather ZD_TML_TML_01 (my custom template).
If I look in the SPRO settings, there is even a section called Set Standard Web Templates. If I open that section, then I can specify templates for Broadcasting, Query Precalculation, Report Precalculation, Enterprise Reporting and Ad Hoc Analysis. I have put my template in all of the above, just to be sure. However, when I run a query from query designer, it still executes in the SAP standard template.
The real reason for wanting to do this, is we want to add 3 buttons to our template, which are on the standard template, namely "New Analysis", "Open" and "Save As". I can easily add these buttons and their associated commands to my custom template, but the problem is that if you press the Open button, choose the query from the resulting popup window, it then loads in the SAP standard template, and not in my custom template.
I am assuming the 2 issues are related.
We are running NetWeaver 2004s if that helps.
Any ideas would be greatly appreciated.
Cheers,
Andrew

HI,
I was having the same problem.But later solved using advice from Josh Hoarding!!.
Actually the setting from SPRO is not working.Jut open the 0ANALYIS_PATTERN take a backup for that.
. In 0analysis_pattern go to the xhtml tab and delete everything between the <body>.....</body> tags, then save the template and run, the template should be blank, now you copy paste the code from the template You designed( which u want as default) in 0analysis_pattern .This is working.
We dont y and how but it works!!!
mandha

Similar Messages

Change default template for a given Theme

Can we change the default template for a theme ? (if yes, how). I had selected theme 3 (business) during the creation of my application with 2 level tabs. After creating parent tabs and standard tabs and getting it working I changed the theme to theme 12 (blue). When the theme got switched, the default application page template became a 1 level tab.
This was because for Theme 12, the default Page template is 1 level tab. I want to change this default Page template to 2 level tabs. I couldn't see option of making this as a default.

Sorry, I found the answer in the documentation in Chapter 7 under
"Changing Default Templates in a Theme".

Changing default template layout from pdf to excel

Hi,
I've created an .rtf layout template. When I run the concurrent program, the layout defaults to pdf format. Is there anyway to change this to excel so that the user doesn't have to go into options each time and select excel?
Thank you.

Yes, but you will probably need to apply a couple of patches. Background article here: http://garethroberts.blogspot.com/2009/01/revisited-changing-default-layout.html

Changing Default Template

I found this archieved discussion while trying to figure out how to adjust the default template settings...
https://discussions.apple.com/message/12877800#12877800
...but things had changed in the 2013 version of Pages, so after I figured out how to do it in the new version, I listed the steps below for anyone else trying to figure it out. It's not incredibly complicated, but not a very logical process to have to go through just to change some basic settings, and it is the only way possible that I've found.
1. Create a template the way you want, and save that .template file to your desktop
File > Save as Template > Save > and name the file “Traditional.template”
2. Go to your “Applications” folder > Then control + click on the Pages icon > Select “Show Package Contents” from the menu > Open “Contents” folder > Open “SharedSupport” folder > Open “Templates” folder > Then scroll all the way to the bottom to find and open a folder titled “Blank.”
3. Drag and drop the “Traditional.template” file into this folder (the template file you saved in the first step).
4. It will ask you to “Authenticate” and ask if you want to replace the original file. Go ahead and do that and now the default “Blank” template will use your settings.

I'm just calling it the default template because it is the first one right there, it's basic, and I think he only template that isn't some fancy customized layout. It is the generic default template.
If you want to say change from a San-serif font to serif, which is what I wanted to do, or something else, this is a way that you can.

Changeing Default Template Language

When i open a pages template the text is not in English, does anyone know how to make it so when i open a template the text is in English

House,
Welcome to Apple discussions.
The text you're seeing in the templates is gibberish Latin. It's there as placeholder text just to show you where to put your own text. For more details on this subject, read this: http://discussions.apple.com/thread.jspa?messageID=607305&#607305
-Dennis

Notes - this MUST be simple!

I can't get my notes to work from the mail application. I press the notes icon, and nothing happens. What simple thing am I overlooking? Thanks!

what happens when you try to create a new note?

Help - this must be simple!

I'm tying to create a 'calculator' where the end user enters
numeric values into 3 fields (gas, electricity and phone) then
those values are added together and the answer automatically
appears in a fourth field entitled 'total'. Seems easy but I am
banging my head against a wall. Do I apply lingo to the field? What
is the lngo? Aaaargh!
Also, I need to add a print button. When pressed, an Adobe
PDF file entitles 'form' is accessed from the same CD and printed,
with or without opening first. The Director project will be saved
as a Projector file.
Thanks a million if you can help

for the first, do you want to appear the answer
automatically, when you enter into the fields or do you have a
button like "calculate results"?
For the button an attached behaviour like the one below
should do it
for the second: sorry, have no time to look around for the
moment but I guess an xtra like Buddy API or PDF xtra should do the
job
Behaviour:

How can I change the application default template

Hi!
If I go to Application Shared Components | Definition | Template Defaults I can see the default page template used by my application. One would think that this is the place to change the default template if wanted to change it, but NOOOOOOO..., like many other things ApEx that's not the way you do it. (An example is the order of columns in an interactive report... all those up/down arrows in there mean nothing if ApEx sets the column default order differently from what you set in the query source or the report attributes section. Nope. You have to log into the application as a developer, edit the column order in your interactive report, and save your report as the default, and THEN you'll get your ordering right. What are these ApEx developers thinking I just don't know...)
I've search around the forums but I haven't found my answers (perhaps I haven't searched hard enough).
So, how do I change the default page template for all pages in my application?
Marc

...and once there, if you click on any of the templates looking for a way to set any of them as the default you'll be looking all day. You see the default column with check marks... why not implement the ability to check/uncheck defaults right there?
Alas, if you click on Edith Theme <no>, then you can set the default template. It's a little link to the right under Tasks.
My bad for still not understanding the way the ApEx interface works. It certainly isn't intuitive to me, but that's just me. Hopefully I'll get better.
Marc

Who got this brilliant idea when you want to pick up a contact to first cross the group and then click end ? Did you hire an employee from Microsoft ? Apple MUST remain SIMPLE to use !!!

Who got this brilliant idea and change thing that way : when you want to pick up a contact on your iphone, you first have to cross the group and then click end ? Did you hire an employee from Microsoft ? Apple MUST remain SIMPLE to use !!!

Claudius,either you didn't read my post, or you jumped to conclusions. I had a skype account that was created using a microsoft account (NOT THE ACCOUNT I AM USING NOW). PURE MICROSOFT ACCOUNT NO OTHER ACCOUNT LINKING.I had to change the primary mail of that account.I was told "no can do" by skype support.I found that if I went to account settings and clicked on the link on the line below the one that said "MICROSOFT etc" (labeled something along the lines of "TV or Device") I got the opportunity to set the password of the "live:username" account (WHICH YOU COINCIDENTALLY HAVE TO DO IF YOU WANT TO USE SMART TVs ETC).Once that was done, I COULD SUCCESSFULLY DO WHAT SKYPE SUPPORT SAID WAS IMPOSSIBLE- I could change the primary mail address. once that was done, and NOT BEFORE, I linked the account to a facebook account as well, just to be sure I have more than one way to access the skype account. What caused you to get the impression that I was writing something else? furthermore this sentence - "The solution you described in your initial message isn't actually once since all the time you were operating on different account that weren't actually linked" does not make sense, I think you mis-edited it.and I need to point out that you are incorrect. I WAS NOT OPERATING ON DIFFERENT ACCOUNTS I WAS OPERATING ON ONE SKYPE ACCOUNT, THAT WAS CREATED USING A MICROSOFT ACCOUNT just like you say you recommend. I still don't know how you can misread my initial entry like that. If you have a better solution to my initial problem - changing the primary mail of a skype account created throuth either a microsoft account or a facebook account, Please write a sticky to explain how to do it, and please inform skype support that Yes it can be done, and this is the way it is done. So far my "lucky shot" seems to be the only way to do it.

How would you change the default template?

How would you change the default template?

Hi,
what do you mean by changing the default template? Do you want to change the standard BEx web template for all web applications? This can and should be done with transaction SPRO, there you can change it to your own (maybe by copying the standard template and fitting it to your needs).
With regards,
Daniel

How to change the default template for a concurrent prog ?

Hi i have Std Conc prog "Payables Posted Invoice Register". It has a std template with same name "Payables Posted Invoice Register". Now i have created a custom template and attached it to the same Data Definition.
The Requirement is that only particular users will use the custom template, hence they will chose it while running. BUt what happened now is in the Conc Prog submit screen it is taking my custom template as the default one.
Hence majority of the users wudnt look at the template and get the custom o/p.
I want to make the std template itself as the default template and make the custom template available to chose for a smaller set of users.
Thanks,
Vj

Hi Shadab,
Yes, that is a valid work around but my task is not to create a seperate data definition and a seperate concurrent prog for it. I HAD to use the standard concurrnet prog but jsut add my template as a non defaulted template.
Anyways, i have solved it now. This is how
System Adminitration => Concurrent Programs => select ur Concurrent Prog => Update => OnSite settings .... select the template you want to default.
Thanks,
Vijay

Change Default for Open New Template File In Adobe Illustrator

How can I change the default folder when trying to "Open From Template".
When I use the open from template it defaults to the template folder in the program folders.
I want to change the default folder to a different location.
Adobe Illustrator CS3 13.0.2

Here's how to have your templates available in the "File New From Template" in Adobe Illustrator for Windows.
What you need to have
Administrator access to your machine.
What you need to know
The default directory for Adobe Illustrator templates is here (for CS5.1)
C:\Program Files (x86)\Adobe\Adobe Illustrator CS5.1\Cool Extras\en_US\Templates
The default Windows security doesn't allow shortcuts to be created directly under that directory.
You can, however, create the shortcut indirectly!
What you need to do
In Summary
Create one (or multiple) folder shortcut(s) in the default Illustrator template directory.
In Detail
Open Illustrator
Select File -> New From Template
Drop down the "Look in" drop-down, note the directory:C:\Program Files (x86)\Adobe\Adobe Illustrator CS5.1\Cool Extras\en_US\Templates
Open a Windows Explorer, and navigate to that directory
Open another Windows Explorer, and navigate to the directory where you keep your templates.
Right-click-drag your folder from the second Explorer (your directory) to the first Explorer (default templates) and drop.
Select "Create shortcut" from the right-click popup menu that appears when you "drop" (release the mouse button).
Windows will display a message "Shortcut cannot be created here, do you want to create it on the desktop".
Select Yes.
Move the directory shortcut to the Illustrator to the first Explorer (default templates directory)
Windows will ask for Administrator permissions.
Select Yes.
You can right-click on the template shortcut and rename it without the " - Shortcut" suffix; you'll have to grant Administrator permissions for that as well.
After completing these steps, your template shortcut will appear properly and you can select it. Happy designing!

Simple/silly question: how do I set/change default font/color for outgoing mail messages?

Simple/silly question: how do I set/change default font/color for outgoing mail messages?

Just a suggestion..........
Download Thunderbird. Easier to use when it comes to what you want to do w/your emails.

Change the Show View Options' "All windows" default to "This window only"?

By default, all Show View Options panes are set to "All windows". Is it possible to change the default to "This window only"?
I regularly change icon sizes for various folders, but never for all windows. So every time that I use the Show View Options pane, it's an annoying "click This window only" process.
screen capture of Show View Options pane
http://aycu01.webshots.com/image/11080/2003481958008021751_rs.jpg
17" iMac G4, 1GHz PowerPC, 768mb RAM Mac OS X (10.4.9)

The default is for any window you have not previously opened and set to have All Windows as the default, for List and Icon Views. Once you click This Window Only and make your settings, then every time you open that particular folder it should remain at the This Window setting.
I find the default of All Windows really really annoying, but I am aware of no way to change this. Send Feedback to Apple:
http://www.apple.com/macosx/feedback/
It should be a user settable global preference, but it isn't.
Francine
Francine
Schwieder

Change default colours in quiz template

Hi,
I'm using the Flash quiz templates to make some quizzes.
Can anyone tell me how to change the colour of the message
text AFTER an option has been selected. I can change the colour of
the 'Make a selection' text but once the selection has been made
(ie the option box checked) the default blue is used for the
correct answer text and the default red is used for the message
text. I'd like to make them the same colour as the rest of the text
I am using in the quiz.
Thanks very much.

Here's how to have your templates available in the "File New From Template" in Adobe Illustrator for Windows.
What you need to have
Administrator access to your machine.
What you need to know
The default directory for Adobe Illustrator templates is here (for CS5.1)
C:\Program Files (x86)\Adobe\Adobe Illustrator CS5.1\Cool Extras\en_US\Templates
The default Windows security doesn't allow shortcuts to be created directly under that directory.
You can, however, create the shortcut indirectly!
What you need to do
In Summary
Create one (or multiple) folder shortcut(s) in the default Illustrator template directory.
In Detail
Open Illustrator
Select File -> New From Template
Drop down the "Look in" drop-down, note the directory:C:\Program Files (x86)\Adobe\Adobe Illustrator CS5.1\Cool Extras\en_US\Templates
Open a Windows Explorer, and navigate to that directory
Open another Windows Explorer, and navigate to the directory where you keep your templates.
Right-click-drag your folder from the second Explorer (your directory) to the first Explorer (default templates) and drop.
Select "Create shortcut" from the right-click popup menu that appears when you "drop" (release the mouse button).
Windows will display a message "Shortcut cannot be created here, do you want to create it on the desktop".
Select Yes.
Move the directory shortcut to the Illustrator to the first Explorer (default templates directory)
Windows will ask for Administrator permissions.
Select Yes.
You can right-click on the template shortcut and rename it without the " - Shortcut" suffix; you'll have to grant Administrator permissions for that as well.
After completing these steps, your template shortcut will appear properly and you can select it. Happy designing!

Changing Default Template ... this must be simple ??

Similar Messages

Maybe you are looking for