Changing default transaction timeout for 5.1

          Hi
          Does someone know a way to change the default ejb transaction timeout for
          WL5.1?
          The default is 300 secs, which is a bit too long for me.
          I know I can change it in each deployment descriptor but it would be easier
          and quicker if I could just change the default :-)
          Thanks
          Nicolas
          

There is another way but I think it's more complicated.
After reading the file you can use a java code (java embedded activity) and split the file.
For each part of the split you can PUT by FTP the file with append mode. That way your transaction will run in few cycles with less time.

Similar Messages

  • Creating a query that provides a default transaction type for those transactions not categorized?

    How could I create a query that provides a default transaction type for those transactions not categorized?
    So assuming I have:
    * Transactions table (with transactions)
    * Categories table
    * transactions_categories table - allows to allocate multiple categories (with a percentage)
     - tranactionID
     - categoryID
     - percentageAllocation
    * Usage is such that only non-personal categories have been applied through out data.  So there is a lot of transactions with no categories applied
    Aim:
    * Want to create a query that creates a list of all the allocated amounts, so would include as columns:  transaction.tDate, transaction.tTitle, categories.name, allocatedAmount(calculated from percentage * transaction amount)
    BUT:
    * How could I include in the query, the entries that cover all transaction that haven't been allocated, to a default category "personal", where the allocated Amount would be 100% of the transaction value
    * And also (if it were possible), for transactions that have been categorized but not for the complete transaction value (say only 50% was allocated to a category), how to to cover this off to.  

    To default the value of the category:
    select IIf(IsNull(Category),"Personal",Category) as Category,IIf(IsNull(Category),"100%",PercentageAllocation
    ) as PercentageAllocation from [yourtable]
    What do you want to put the values of these ones:
    And also (if it were possible), for transactions that have been categorized but not for the complete transaction
    value (say only 50% was allocated to a category), how to to cover this off to.  
    Fouad Roumieh

  • Simple/silly question: how do I set/change default font/color for outgoing mail messages?

    Simple/silly question: how do I set/change default font/color for outgoing mail messages?

    Just a suggestion..........
    Download Thunderbird.  Easier to use when it comes to what you want to do w/your emails. 

  • Changing default target namespace for a JPD

    Hi,
    Is there a way in Workshop 8.1 to change the target namespace used when a WSDL
    is generated from a JPD? Currently, Workshop uses http://www.openuri.org. I
    have tried to use the @common:target-namespace annotation in my JPD, but that
    appears to only be valid for JWS files. Is there a way to globally set the default
    target namespace for an entire Workshop project?
    Thanks,
    Nick

    And to just make it more clear :
    and here is the SAP help on the subject:
    Transport Layer in ABAP Workbench
    The Change and Transport System supports the distribution of development work on large projects across multiple SAP Systems.
    The packages in each development system are grouped into one transport layer.
    The transport layer determines whether objects are assigned to a local or transportable change request.
    Use
    Each of your SAP development systems is assigned a transport layer as its standard transport layer. If you use Extended Transport Control, you can assign different standard transport layers to certain clients.
    You can define at the most one consolidation target for each SAP System and transport layer.
    When you create a package, it is assigned the standard transport layer of the SAP System.
    If you want to assign a different transport layer to a package, you require the administration authorization for the Change and Transport System.
    The objects in a package automatically have the transport attributes defined for the corresponding transport layer.
    If a consolidation route originating in their SAP System is defined, then the objects are assigned to a transportable request, and transported into the consolidation target when it is released.
    If a consolidation route is not defined, the objects are assigned to a local request, and are not transported.
    Customizing settings are not assigned to a package. They have the transport attributes of the standard transport layer of the system or client.
    It is best to assign a package a standard transport layer for which a consolidation route originating in the development system is defined.
    To display and maintain the transport layers and routes, use the Transport Management System (transaction STMS).
    Only the system adminstrator can make changes.
    Caution:
    The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of Release 4.0A and cannot be maintained.
    Best regards,
    Menelaos

  • Default  Transaction Attribute for EJBs

    Guys,
    Can you tell me the default transaction attributes if any in Weblogic 7.0 i.e.
    the attributes used
    if not explicitly specified for a bean method when using in CMT ?
    For CMP entity beans,
    MDBs,
    Other beans (?) :
    thanks for your help
    regards
    Ved

    Hello Mr. Woollen,
    As always, thank you for your excellent insight into the internals of BEA WebLogic.
    I now have a better understanding of what happens "by default" in WLS. I do agree
    that changing this now would definitely break existing applications. It's always
    difficult to decide when to officially deprecate a "feature" or to leave it in
    forever.
    Best regards,
    Ryan LeCompte
    [email protected]
    http://www.louisiana.edu/~rml7669
    Rob Woollen <[email protected]> wrote:
    For better or worse, MDBs default to NotSupported and everything else
    defaults to Supports.
    I say for better or worse because I would have liked to change it to
    always require the user to set a default transaction attribute.
    Unfortunately we have many customer's applications who depend on this
    behavior, and I believe if we change it we will break all of them.
    Regardless, I would not recommend depending on our default tx attribute
    and instead always set one for '*'.
    In general, entity beans should run as Required or Mandatory. Session
    beans are usually required or notsupported. MDBs are required or
    notsupported.
    -- Rob
    Ved Gangaputra wrote:
    Guys,
    Can you tell me the default transaction attributes if any in Weblogic7.0 i.e.
    the attributes used
    if not explicitly specified for a bean method when using in CMT ?
    For CMP entity beans,
    MDBs,
    Other beans (?) :
    thanks for your help
    regards
    Ved

  • Transaction timeout for FTP Put as an attachment

    Hi,
    When I am trying to get a file from E Business Suite(Oracle Apps) and place the same in to FTP Outbound as an attachment, I am getting the below exception. This did not happen in PS2 but it is happening in PS3(11.11.1.4) with the same code, can some please me on this. The file size is around 16MB. I have restriction to increase the transaction timeout value in the through admin server.
    java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: Transaction rolled back: Transaction timed out after 299 seconds BEA1-0672B035E0F02A163299 at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1616) at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1503) at weblogic.jdbc.wrapper.JTAConnection.getXAConn(JTAConnection.java:205) at weblogic.jdbc.wrapper.JTAConnection.checkConnection(JTAConnection.java:74) at weblogic.jdbc.wrapper.JTAConnection.checkConnection(JTAConnection.java:65) at weblogic.jdbc.wrapper.Connection.preInvocationHandler(Connection.java:94) at weblogic.jdbc.wrapper.Connection.prepareStatement(Connection.java:496) at oracle.integration.platform.xml.XMLDocumentManagerImpl.insertDocument(XMLDocumentManagerImpl.java:648) at oracle.integration.platform.xml.XMLDocumentManagerImpl.insertDocument(XMLDocumentManagerImpl.java:185) at sun.reflect.GeneratedMethodAccessor2001.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307) at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy336.insertDocument(Unknown Source) at oracle.integration.platform.instance.store.MessageStore.savePayload(MessageStore.java:248) at oracle.integration.platform.instance.store.MessageStore.savePayloads(MessageStore.java:102) at oracle.integration.platform.instance.InstanceManagerImpl.persistPayloads(InstanceManagerImpl.java:798) at oracle.integration.platform.instance.InstanceManagerImpl.persistReferenceInstanceBean(InstanceManagerImpl.java:1150) at oracle.integration.platform.blocks.adapter.AbstractAdapterBindingComponent.createAndPersistBindingInstance(AbstractAdapterBindingComponent.java:504) at oracle.integration.platform.blocks.adapter.AdapterReference.createAndPersistBindingInstance(AdapterReference.java:357) at oracle.integration.platform.blocks.adapter.AdapterReference.createBindingInstance(AdapterReference.java:331) at oracle.integration.platform.blocks.adapter.AdapterReference.post(AdapterReference.java:253) at oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler.doPost(AsynchronousMessageHandler.java:142) at oracle.integration.platform.blocks.mesh.MessageRouter.post(MessageRouter.java:194) at oracle.integration.platform.blocks.mesh.MeshImpl.post(MeshImpl.java:215) at sun.reflect.GeneratedMethodAccessor3279.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307) at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy333.post(Unknown Source) at oracle.fabric.CubeServiceEngine.postToMesh(CubeServiceEngine.java:806) at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:258) at com.collaxa.cube.engine.ext.common.InvokeHandler.__invoke(InvokeHandler.java:1056) at com.collaxa.cube.engine.ext.common.InvokeHandler.handleNormalInvoke(InvokeHandler.java:583) at com.collaxa.cube.engine.ext.common.InvokeHandler.handle(InvokeHandler.java:130) at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:74) at com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform(BaseBPELActivityWMP.java:158) at com.collaxa.cube.engine.CubeEngine._performActivity(CubeEngine.java:2463) at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:2334) at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1115) at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:73) at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:220) at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:328) at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4350) at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4281) at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:679) at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:654) at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:293) at sun.reflect.GeneratedMethodAccessor6353.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104) at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:94) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413) at oracle.security.jps.ee.ejb.JpsAbsInterceptor.runJaasMode(JpsAbsInterceptor.java:81) at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:112) at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:105) at sun.reflect.GeneratedMethodAccessor1143.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310) at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37) at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54) at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131) at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119) at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy316.handleInvoke(Unknown Source) at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.__WL_invoke(Unknown Source) at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:39) at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.handleInvoke(Unknown Source) at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:35) at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:140) at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatchTask.java:88) at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:64) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) at java.lang.Thread.run(Thread.java:619) Caused by: weblogic.transaction.TimedOutException: Transaction timed out after 299 seconds BEA1-0672B035E0F02A163299 at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1614) ... 100 more
    Thanks
    Prashanth

    There is another way but I think it's more complicated.
    After reading the file you can use a java code (java embedded activity) and split the file.
    For each part of the split you can PUT by FTP the file with append mode. That way your transaction will run in few cycles with less time.

  • Changing default page margins for Web Intelligence

    Is it possible to change the default page margins for new Web Intelligence documents.  The default size is 76px which most people find exceedingly large.
    The defaultconfig.xml file can be modified to specify default fonts, page size, orientation, etc. Can anything be done to this file to change the default page margins as well?
    Any help would be appreciated ...
    Thanks

    Hi James,
    Following information might be helpful for answering your queries.
    An ER has already been raised for the functionality yo want and the ER# Id is ADAPT01081135
    State
    Submitted
    Origin
    Customer
    Date Entered
    2008-05-23 12:29:54
    Subject
    XIR2: Webi: Wanted to set the default 'Page Layout Margins' to 0px instead of 76px each.
    Current Functionality
    The default 'Page Layout Margins' are set to 76px each for a new Webi report.
    Create a new Webi report - Go to Page Properties - Page layout - By default, Top margin=76px, Bottom margin=76px, Left margin=76px, Right margin=76px.
    Requested Functionality
    Wanted to set the default 'Page Layout Margins' to 0px instead of 76px each.
    Expected Added Value
    There should be an option in Webi / Infoview to set any property value to any required default value. This should be independent of the user, because it may differ from user to user.
    Found In Product
    Business Objects Enterprise.
    Found In Product Version
    XIR2.
    Found In PFA
    Web Intelligence
    B) use SDK kit (this is only a suggestion though)
    https://www.sdn.sap.com/irj/sdn/businessobjects-sdklibrary
    https://boc.sdn.sap.com/codesamples
    You would find almost everything here that BusinessObjects supports (about the SDKu2019s). You could also use the forums to check if anybody have already done what you are looking for)
    Regards,
    Sarbhjeet Kaur

  • Changing default refresh time for the UWL.

    Hello,
    I am trying to change the Default refresh time for the UWL(workflow inbox) for all the users before they personalize or save the refresh time, Would changing the refresh time in the .xml file work or is there any other way to do it? Thanks,
    Aniketh R.

    We have had all sorts of issues with this as well. I have been unable to find a solution that works as of yet. From my own debugging it seems as if RP is trying to parse the pasted text as logo's, fields etc.... I am looking at potentially using a script w/ set interval to "clean" the clipboard data but this isn't a perfect solution for numerous reasons.
    What is happening to your letters when the users paste? Our letters actually become unusable after a plugin save. So I am actually very interested in the answer to this question!

  • Change default port number for web logic!

    Hi folks,
    In my scenario, i already installed obiee 11g with simple install along with web logic on windows xp machine.where this will creates default port number for all services. now i want to change default port number of web logic that is 7001 to some to other port number. how to change this ??.plss help me asap.
    regards,
    mahesh

    Refer tohttp://www.oracle.com/technology/documentation/1012_solaris/install.1012/install/ports.htm

  • How to change default audio device for gnome?

    My laptop has an integrated sound card, but I lately got a USB headset (headphones+mic, which works with linux btw, I tested it with GizmoProject which lets me choose which /dev/dspXX I want): http://www.geeks.com/details.asp?invtid=U200&cpc=SCH
    So, how do I change the default audio device for *all* desktop sounds to the headphones? I tried the two gnome sound properties, and when I select the headset device they let me configure it but ALSA still uses the internal audio card. Why isn't there a way to easily select which device you want for your sounds as there is for BeOS, Windows and OSX?

    Eugenia wrote:Well, it's still not good enough.
    We can't satisfy everyone. What you want is a corner case. For most people ALSA and dmix works appropriately, and that is what esd uses by default. We cannot document and automate every configuration possible. That's up to the users.
    However, if you don't want to restart gnome, try the below... I make a few assumptions, but even if they're wrong, they're hardly difficult to work around.
    Just copy the /etc/esd.conf to ~/.esd.conf, make your change, then do killall esd. Presumably gnome will restart esd, and it ought to read your local config. If it doesnt, start it yourself.
    Feel free to write a script that automates this, or document it on the wiki.
    I have to restart Gnome to get this thing working. Other OSes *automatically* can use an alternative device. But if I change ESD, I will have to restart Gnome, no?
    Well, if you try my suggestion above, no. You can restart esd yourself. And that's what all the other distros do, except with some fancy GUI.
    James

  • Change default video player for iPad

    Is there any way to change the default video player for iPad?
    For instance, to be able to see mpeg, mkv videos, etc.

    Did you figure out how to do it ? I have some movies copied over from a NAS into FileExplorer app on my ipad, but it uses quick time as player and it does a lousy job with mkv files.
    Note: Jailbreaking is not an option

  • How to Change Default Iview Properties for Role Upload?

    Hello,
    We have many roles to upload from R/3 ABAp system to NW2004s EP.
    We use the Role Upload tool in the Portal to achieve this.
    It works fine, the roles are created in the portal and can be assigned to users.
    The fall back is that we have to modify every single transaction iview in the portal after the upload to modify the SAP GuiType from "SAP GUI for HTML" to "SAP GUI For Windows".
    How can we change the default model used of SAP GuiType for uploading transaction iviews in uploaded roles?
    Also, the uploaded role is not flaged as an "Entry Point", is there a way to set this marker to "Yes" as a default value for all uploaded roles?
    Best regards.

    This is one of Acrobat's less intuitive areas!
    For defaults, right-click on the text box that is as you want it: then select menu item 'Make current properties default'
    Use Ctrl-E to bring up the Properties toolbar: its content will change depending on whether you have the box or the text selected, and selecting the box or text can be a bit clunky.
    Steve.

  • How to change default PIRWBUSER password for ABAP Proxy monitoring ?

    Hi,
    Please advise how to change setting for PIRWBUSER in PI so no need to use master password PI in ECC server.
    In the Message monitoring you can have option to monitoring ABAP Proxy transaction in the other SAP Instance. But of course you need to have PIRWBUSER in that target SAP instance.
    How to change this configuration for PIRWBUSER for other SAP Instance. because other SAP instance it migh have different password for PIRWBUSER ?
    Regards
    Fernand

    Hello there.
    Please check the note below according to your system:
    #999962 - PI 7.10: Change passwords of PI service users
    #936093 - XI 7.0: Changing the passwords of XI service users
    #721548 - XI 3.0: Changing the passwords of the XI service users
    Regards,
    Caio Cagnani

  • How to change Default document size for CC Library Graphics (InDesign)

    Good morning --
    I have just discovered the amazing uses of the CC Library setup in InDesign and would love to be able to use it as a tool to collaborate template galleries amongst coworkers.
    I work in an industry that offers many different templates for our Marketing pieces available to the sales team. What we have in place right now is about 50+ different templates in their own packaged files. Now, this isn't all that difficult to maneuver around, but the CC Library has made it so I can "drag and drop" templates into place. This drag & drop feature is easy enough for me to grasp, and with the proper training it should be with the rest of the team (should being the keyword). However, in some cases if you double-click on Library graphic it opens the file in it's own editable file with a custom document size of 8.5x11 Portrait (which I imagine to be the internal InDesign preset).
    My questions therefore are when I double click on the library "Graphics" can the document size be anything other than 8.5x11? Can each Graphic have it's own document preset?
    - If I open a file that is set for landscape, all of the "Graphic" falls off of the spread.
    - Some "eblasts" are much longer than 8.5x11 (sometimes as much as 8.5x20), thus knocking some of the "Graphics" into that weird space area.
    Please let me know if I am not being a clear enough.
    Thank you!
    Steve

    @Steve – you are totally clear what you are doing and what you like to do.
    But I fear an automatic setting that is creating the page size according to an asset's size does not exist right now.
    I can change the size of a new document beforehand, if no document is open and create a new size in the document's properties dialog with the keyboard shortcut alt + cmd + p (in my German InDesign on Mac OSX 10.7.5). But you have to know in advance what size that should be.
    Example: If I chose A3 instead of A4 (my default) when no document is open and double click an asset in a CC Library the asset will be placed in a one page document sized A3.
    1. Changing the size (no document is open) in my German UI of InDesign CC-2014.2:
    2. Double click and the result is according to the settings I made:
    Uwe

  • Changing Default Print Quality for Photosmart Printers in Stand Alone mode

    Hello Everyone. I am using a group of Photosmart Printers in Stand Alone mode for events where I shoot and print on site. Although I have quite a few printers with me (6 total at a time), I prefer to have the printers print in "Normal" Print Quality Mode, instead of "Best". Images come out twice as fast, and because I have a disciplined shooting technique, I get "GREAT" results from the "Normal" setting. I and/or my assistant have to go to my "Preferences" to change my Print Quality everytime we prepare to print another batch of photos. Sometimes we have groups that will want 5 copies, and it simply takes FOREVER in Best mode, and really, although with a 5x Loupe I can tell the difference, My customers can't with their naked eye. Sometimes we forget to change the setting due to the pressure of the pace sometimes. OOPS!
    I am using the following Photosmart Printers: A516, A512v and the 335.
    As I stated, I don't use these with a computer, I drive them straight from CF Cards. I do have all the original software, if I need to use the computer to make some changes. Just tell me how. Manual says nothing about getting the setting to default to normal.
    Thank you so very much in advance.
    BLAYZE!

    Hello:
    One way of assuring high quality would be to export the photo to the desktop (at highest quality) and then print from there.
    In my own case, I find that when I occasionally print a photo from iPhoto, the quality is quite good.
    Barry

Maybe you are looking for