Changing defaults on glossary terms

Tearing out my hair trying to turn off the default capitalization of glossary terms. Has anybody succeeded in doing this? Maddening to find that entries are capitalized in the iBook glossary. The reason dictionaries over the centuries have NOT indiscriminately capitalized every entry is so that when a given word MUST be written with a capital letter -- say, France or MacBook -- or when a distinction rests on the case of the letter -- as in apple vs. Apple -- the presentation of the term will be accurate. Making every word begin with a capital and rigidly controlling the format so we can't change it: not good.

As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
http://www.apple.com/feedback/ibooks-author.html

Similar Messages

Expanding Text Glossary Terms into Popup windows

I am using RH6 and I have a help project that uses expanding
text glossary terms throughout all the topics. When the topic is
printed out, the glossary terms are auto expanded and it disrupts
the flow of the text.
My questions are:
Is there a way to quickly change expanding text glossary
terms to just popup hyperlink windows?
If not, how can I find all the expanding text glossary terms
using the Multi Find and Replace?
Can they be searched for in a Report?

There's another way. Enclose your glossary definitions in
brackets [a means of enclosing text] so that the definition does
not interrupt the flow.

Term Store Management: Change Default Label

I have merged two entries together (for the sake of this discussion, lets call them 'cat' and 'feline'). The Default label is currently 'Cat' and 'Feline' has been added to the Other Labels as part of the merge process.
I actually want the default label to be 'Feline' but I cannot change it in the term store manager. I have tried adding 'Cat' into Other Labels (in case Default Label can only show one of the existing labels) but that too fails.
The message I get is 'This operation cannot be completed. The terms store may be unavailable.' But I am able to add other entries to the Other Labels list (e.g. 'Lion') without any problems.
How can I change the Default Label and also add the existing Default Label to the Other Labels list?

OK, went back and tried again today and was able to get it to work first time.
I changed the Default Label from 'Cat' to 'Feline' and changed the Other Label entry 'Feline' to 'Cat' in a
single step and then saved.
I believe I tried this before (in addition to various permutations of attempting this in multiple steps) so either I am mistaken and was doing it wrong before, or the initial merging of terms takes time to fully implement (during which some changes are restricted),
or SP2010 is just a bit flakey. Having spend a few weeks on SP2010 now my money is on the latter option...

I would like to make some changes in GR91 payment term

Hi Gurus,
I am pretty new to SAP ERP. I got assigned the ticket as requested below.
Business requirement:
I would like to make some changes in GR91 payment term.
1. 85 days from invoices (instead of 93)
2. Only the 5th of each month , will be the bline day (payment day), instead of 5th & 20 th.
My Analysis:
I have checked OBB8 in EED system for payment term GR91 and I could see the below 3. Here I have attached one file with business requirement and GR91 payment term screenshot.
1. PT - GR91
Day Limit - 4
Fixed day - 5
Additional Months - 3
Default baseline date - Document date
Sales Text - 20-31 at 5th (93 days frm Inv)
Own Explanation - 01-04 at 5th (93 days frm Invoice)
1. PT - GR91
Day Limit - 19
Fixed day - 20
Additional Months - 3
Default baseline date - Document date
Sales Text - 20-31 at 5th (93 days frm Inv)
Own Explanation - 5-19 at 20th (93 days from invoice)
1. PT - GR91
Day Limit - 31
Fixed day - 5
Additional Months - 4
Default baseline date - Document date
Sales Text - 20-31 at 5th (93 days frm Inv)
Own Explanation - 20-31 at 5th (93 days from invoice)
Please help me in this regard. How could I go ahead with configuration, what are the options I should select in OBB8.
Thanks in advance for your help............
Thanks & Regards,
Siva

Hi Siva,
Day limite 5 doesn't allow GR91 use after 5th day. So you will have precisely 85 day.
If you want have unlimited day use and fixed day you have never precisely 85 days.
Please do a test. Define OBB8 and replace a Vendor Invoice Payment term to GR91. Look at FBL1N the due date.
regards

Problem changing default key bindings using Oracle Terminal

Hello,
I'm facing a problem changing default key bindings using Oracle Terminal. I changed
some bindings, saved them in forms60/fmrusw.res, started the generation and saved again.
I thought that's it but it wasn't. It took no effect at all in Forms (even after recompilation) although reopening the file in Terminal showed the changes. I'm using Forms in German, which means that even the key bindings displayed in Forms are translated i.e. STRG+F1 instead if CTRL+F1,
but I can't find a german version of this resource file, so i think it's the same resource file for all supported languages. But what is needed for the changes to take effect ?
Thanks in advance
STD
null

Hi,
is it client/server you are working?
if so you should not be using the fmrusw.res file because I guess your NLS_LANG is German_Germany.WE8ISO8859P1 or something like that. This means the terminal that is being opened is fmrdw.res instead of fmrusw.res and this file should be edited using Oracle Terminal.
if you are working via the web implementation than you can open the file fmrweb.res in a text editor and change the keybindings in there. If you need to have the PC like key bindings on the web just open the fmrpcweb.res and see if it contains the German texts. If so you can either copy this file over the frmweb.res file or you can specify term=fmrpcweb.res in the serverargs parameter.
Hope this helps.
Kind regards,
Frank van der Borden
Oracle Support Services
Netherlands

Change default dissolve

Hi folks, I am new and I sure hope someone can help me. I have been trying to change the default Cross Dissolve, following the directions in "Help" and spending hours trying other things as well, to try to make it work. I change the transition time to various things, then control/click and select Change Default—it doesn't work. I just get the same old useless one-frame dissolve. Sometimes I can get a dissolve that is longer, but I can't repeat it. And I can't adjust it in the timeline. And sometimes it just does things I didn't ask it to do, like give me a four-frame dissolve a few times, then it goes back to one frame spontaneously. I don't think I am an idiot. This is not intuitive at all, and the directions in "Help" are useless. Does anyone know how to change the duration of a dissolve, in such a way that it actually changes, and is actually repeatable? Please help!

I still have the weirdo changing dissolve length bug on my systems here but Handles are pretty simple in concept but easy to forget.
If you cut a 3 second clip so you're just using the middle second, then that clip has a one second "handle" before the In cut and after the Out cut.
Now, imagine you export that clip going only by it's edit points so you ONLY have the middle second exported to a QT movie or something. Then there are no handles before or after those original clips.
For me thinking in terms of splicing film helped me grasp this when I went from Flatbeds to Final Cut. In order to do a dissolve with actual film you need to lay the two pieces of film atop one another so they overlap - the overlap is the dissolve and the overlap is the overlapping of the two pieces of film's "handles".
The handle is the little bit of extra you need to make the dissolve before the image is dissolve free and into the next shot.
You can also think of handles this way: Take one clip and put it on V1, then take another clip and put it on V2 but place it a full second further down the timeline. Now you have two clips that overlap for one second.
Manually fade the first clip DOWN during the overlap, then manually fade the second later clip UP during that overlap. The overlap there are the clip's handles.
Message was edited by: W. Raider

How to change default unit on Database 11g

Hi All
I'm using Oracle Database 11g Enterprise Edition Release 11.1.0.6.0.
If I define my column:
USERID VACHAR2(8) --> Default USERID VACHAR2(8 BYTE)
How can I change default unit BYTE to CHAR as the following
USERID VACHAR2(8) --> Default USERID VACHAR(8 CHAR)
Thanks alot
Thiensu2810

I have set Database system with the following SQL:
alter system set nls_length_semantics=char;
alter session set nls_length_semantics=char;
But, It does not match.
And when I insert data, the following error occured.
SQL> insert into binhtest values('初期化パ');
ORA-12899: value too large for column string (actual: 12, maximum: 8)
I've checked value of NLS_LENGTH_SEMANTICS, it is CHAR
SQL>SHOW PARAMETER NLS_LENGTH;
NAME | TYPE | VALUE
NLS_LENGTH_SEMANTICS | String

How to change default FCoE QoS class - Nexus 5020

I see that on a Nexus 5020, the default FCoE QoS class is 50%. I am not using FCoE so I would like to adjust this value to 0%. I switch complains and says I can't change default values. How should I go about getting around this to eliminate the FCoE queue and give 100% BW to default? Thanks.

No. The default classloader is a builtin classloader in
the JRE. You can use other classloaders.
The java.net.URLClassLoader is provided in
the JDK. That's the only one. Otherwise you
should subclass ClassLoader and implement
the loadClass method (f.i.
loadClass("my.program") {
String file="my.program".replace('.','/') + ".class";
// find the file in classpath
// read the class file in a byte[]
return defineClass(byte[]);
although this is not the advised way to do it. Search the web for how to implement a classloader directly.

How to change default thresholds for some metrics of all targets.

Hi!
We have a lot of servers which have to work hard.
So, our OEM very often generates messages like these:
"EM Alert: Critical:dbsora90.tsb.kz - CPU Utilization is 99.95%, crossed warning (80) or critical (95) threshold."
"EM Alert: Critical:dbsora94.tsb.kz - Disk Device c8t60A9800043346C384C344A4A63516D6Ad0(ssd4) is 99.7% busy."
"EM Alert: Critical:dbsora94.tsb.kz - CPU Load (Run Queue Length averaged over 5 minutes) is 20.78, crossed warning (10) or critical (20) threshold."
I need to change default tresholds for mentioned metrics but I can't their defenition in SYSMAN.MGMT_*-tables or suitable settings in OEM GUI.
And I have no time to edit treshholds manually for each target. )

Modification of Metric Thresholds (as this is what you are referring to), should be done using the Metrics and Policy Settings link (to be found in the Target Home page).
Don't mess around with the SYSMAN tables!
Best thing to do here is to start using Monitoring Templates for this.
Check:
Oracle® Enterprise Manager Concepts
11g Release 11.1.0.1
http://download.oracle.com/docs/cd/E11857_01/em.111/e11982/toc.htm
Regards
Rob
http://oemgc.wordpress.com

How to change default output XMLP report to rtf/excel !

I used xmlp 5.6.2
The default output for report is pdf file.
Now i want to change default output to rtf or excel file
Please ! help me !

Hi Brightsea,
We customized the code in FNDRSRUN.fmb, But we are not able to get the output in RTF format.
Our requirement is to display the report output in .rtf or .xls(Not required to defaultly as .rtf or .xls).
we are getting the following error.
"The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'http://galaxian.bluestar.cvg0:8000/OA_CGI/FNDWRR.exe?t...
{\rtf1\ansi\deff0"
^
Regards,
suresh.

How to Change Default User Directory without changing System Directory

Hi Everyone,
I need to change default User Directory for my JDeveloper 11.1.1.0.2.
Default User Directory = C:/JDeveloper/mywork
Default System Directory = *<JDEV_HOME>/System*
Now I Need to Change it to
My Default User Directory = C:/Monty/JDev11g2/
But System's Default Dir = *<JDEV_HOME>/System*(Same)
For this i explicitly Set variable ide.user.dir to C:/Monty/JDev11g2/ in JDev.boot file as explained in Installation document.
Working fine but it contains System Folder too. I don't want this.
Any Help to find me separate these both as it works for Single User.
Thanks,
Fizzz...

Hi John, You must be right if i'd believe in ghost, A Ghost of System's Folder :-). Well that's true, We should ignore it. But still If someone finds any Clue then let me know.
Thanks
Fizzz...

How to change default compile directory tmp_ejb?

Dear all,
Someone knows how to change the default directory "tmp_ejb...." in WebLogic Server
7.0?
This is the default directory where WebLogic Server 7.0 generates and compiles
the EJB's declared in config.xml.
I try to specify the attribute TmpPath="ANOTHER_TMP_LOCATION_DIRECTORY_FOR_EJB"
in the EJBContainer node but still doesn't work.
The same thing happens when I test this attribute on EJBComponent declaration.
Someone knows if there is an enviroment variable that specify this tmp_ejb location
path?
It's false that the tmp_ejb is located where the config.xml file is placed.
I have 3 weblogic servers and they haven't the same behaviour.
Someone can help me??????
Thanks.

I ran into the same problem and was wondering if you got an aswer the question you posted in BEA's news group: "How to change default compile directory tmp_ejb?
Thanks

How to change default approval for ResourceAuthorizerApproval ?

Hi,
I'am new in OIM and I follow documentation where I found some predefined workflows. I'd like to use them.
Could you tell me, step by step, how to change default approval for ResourceAuthorizerApproval (only for my new defined resource).
I'm using OIM 11g and Design Console 11.1.1.3.0.2.0

Ok, I made new tamplate (copy of existing one), there I changed Template Level Approval Process and set allowed resources. It seems to be ok :)
If there are other solutions please share with me
Thanks
M.

How to change default Current Flag values for SCD2?

I'd be curious to find out how to change default Current Flag values for SCD2 (instead of 0/1 to use N/Y)
Probably I can change IKM module .... is there another way?
Thanks

Hi,
You need change the IKM. This values are hardcode in the IKM.
You can create a new IKM and the values used are a options of the IKM.
Regards
Edited by: Uthred on May 18, 2009 4:27 PM

How to change default save as location

hi,
how to change default save as location in acrobat 7.0?

Why is Acrobat involved in this process at all? Why don't you save directly the pdf from your email program directly where you want it to be? Acrobat is just adding another step to this process.

Changing defaults on glossary terms

Similar Messages

Maybe you are looking for