Changing DFF and Date Information on Copied Orders

Can anybody tell me if it is possible to change existing DFF information and line date information on a copied order? I assume so but require confirmation.
Thanks

iPhoto Menu -> About iPhoto
will tell you which version you have. It's important because the solutions vary according to the version.
Regards
TD

Similar Messages

  • Can we change the doc date in a purchase order ?

    can we change the doc date in a purchase order ?
    i have created PO with wrong dates but now want to correct it, but its not letting me do it ...why ?

    I don't think DOC DATES can be changed. You can only change the posting dates of the Goods receipt and Invoice documents as that is what matter for your financial consolidation.
    Regards,
    Ravi
    Note : Please mark the helpful answers

  • Scehdule Line Date getting change to future date once the Sales Order is saved

    Hello Experts,
    Good Morning to you all,
    This is with respect to the Issue we are facing for the Orders having Product Allocation on multiple materials. Please find enclosed the detials below.
    Issue : Scehdule Line Date getting change to future date once the Sales Order is saved. These Order's are having Product Allocation on multiple materials.
    Description:
    We have implemented Product Allocation few months back.
    We have Product Allocation on multiple materials which are in demand and has been reserved for the Customers of different PA behaviors.
    When we are trying to create the Sales Orders for the normal customer who is not on Product Allocation. The Order Schedule Line is getting changed to future date once the Sales Order is saved after initial creation.
    These Order's are having materials of Product Allocation.
    I have enclosed the sample screen shot of the error we are getting which saving the Sales Order and also the Order Schedule Line screen shot showing future date.
    Error Message : There may be Product Over Allocation in Delivery Group 001.
    Message No : VV023
    This is a random behavior we are coming across and out of 10 Order 2 or 3 Orders is getting this Issue.
    Please share your inputs how to rack this Issue.
    Your suggestions will be highly appreciated.
    I am unable to upload the attacments dont know what the reason.
    Thanks,
    Farhan.

    Check whether you need to carry out the coding corrections as recommended in the following note:-
    Note 52067 - Message VV023/VV024, but no prod.alloc.processing    
    But I wonder this is for older versions and not sure whether this would help you to overcome from the issue.
    G. Lakshmipathi

  • Looking at FOCUS POINTS changes Time and Date

    When I select VIEW FOCUS POINTS it changes the Time and Date information in the Metadata. I have seen it happen twice now. The images were taken with a Nikon D90 while in Australia. The first time that I noticed this I was in Hawaii and just looking at the FOCUS POINTS changed the Date and Time to Hawaii time. It happened again in Maryland and the time zone was changed to Eastern Daylight Time. To put the images back in the proper place I have had to change the DATE and TIME.
    Has anyone seen this?
    Roger

    Thanks Tony,
    Did you try this:
    Shoot a photo with your camera set to your local time.
    Import into your Mac set to the same local time.
    Quit Aperture
    Restart
    Set the time on your Mac to another time zone.
    Open Aperture.
    Open the photo.
    View the Focus Points
    Then see if the time metadata is changed.
    Mine changes and the place of the photo in the line-up of my folder changes.
    It still does it after I updated to Aperture 3.0.3 from the 3.0
    I know this is a lot of steps in the test process, but this is how it happens for me.
    If this doesn't work I'll have to look into a new Nikon for you and a flight to Hawaii.
    Cheers,
    Roger

  • Copy purchase order number and date from one sales order to other sales ord

    Hi,
    I am creating sales order in va01. here i am entering purchase order number (p100) and date. Sales order number ex: 42000
    I am creating another sales order with reference to 42000. when creating sales order with reference to 42000, purchase order number (p100) and date has to be copied automatically from that order.
    Can anyone please give me a solution?
    Thanks in advance
    Babu

    Dear Babu,
    Currently, PO number is being mentioned in copy routine 101 but this  
    field VBKD-BSTKD is being cleared out.                                
    If we check this routine code:                                                                               
    FORM DATEN_KOPIEREN_101.                                              
    Data which is not copied                                            
    Pricing date for consignment issue by external service agent from   
    the scheduling agreement                                            
      IF CVBAK-VBTYP CA VBTYP_LP_EDL.                                     
        CLEAR VBKD-PRSDT.                                                 
      ENDIF.                                                              
    PO data should not be copied                                        
      CLEAR: VBKD-BSTKD,                    <<<<<                         
             VBKD-BSTDK,                                                  
    In order to achieve your requirement, you need to consider creating you
    own copying routines for VBKD fields copying standard copying routines
    (for example copying routine 101) according your business requirements
    and change them via transaction VOFM, in order to:                    
      - deactivate the LOCAL: statement                                   
      - delete the clear statements                                                                               
    Once you have created those two routines to match your business needs,
    you can insert them in transaction VTAA, so the sales order will copy 
    the PO date at item level.                                            
    I hope I was able to help you.
    Kind regards,
    Zsuzsanna

  • Unable to change requested delivery date in the sales order at item level.

    The issue is when I create order with one material (linked to network and project is created automatically in the background), I am able to change (in change mode) req delivery date for an item, but when I create order with 2 materials (linked to network and project is created automatically in the background), I can not change (in change mode) the req delivery date of any item. Req delivery date is then copied from the header req delivery date.
    Is this a standard SAP functionality or a defect?

    Req del date is the date requested by customer and  can be changed at item level. Probably the confirmed date in the schedule line is derived from the network scheduling after ATP check. (ATP check is not activated in this case)
    I am able to change the req del date at item level if there is only one item (Linked to network) and not when there are two line items (Both are linked to 2 diff networks belonging to same project)
    I tried to change the date in the network, scheduled and saved but that didnt change the date in the sales order. On the contrary, if I run ATP check, netowrk dates get back to original dates derived from sales order.

  • To Change Delivery Schedule Dates coming from Purchase Order

    Hi Gurus,
    My requirement is i need to change the Delivery dates( Picking date, Transp Planning date, Loading date and Planned GI date ) . The delivery is being made by the Purchase Order through transaction VL10B .The source dates are the dates from the PO. The dates are to be copied for the condition that the order should be of ZDL type and delivery ZXN1. Now there is a routine 301 for this condition .
    I tried to change the dates in this routine but these dates are overwritten by a function module SD_SCHEDULING .
    So is there any other method or exit or any other routine for this.
    I would like to have a  copy of the following dates :
    u2022     Mat. Staging(PO) = Picking
    u2022     Transp. Planning(PO) = Transp. Planning
    u2022     Loading(PO) = Loading
    u2022     Goods Issue(PO) = Planned GI
    u2022     GR End(PO) = Delivery
    Please advise.

    Hi,
    Following are the Exits for VB10B
    V02V0001            Sales area determination for stock transport order
    V02V0002            User exit for storage location determination
    V02V0003            User exit for gate + matl staging area determination (headr)
    V02V0004            User Exit for Staging Area Determination (Item)
    V50PSTAT     Delivery: Item Status Calculation
    V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
    V50R0001            Collective processing for delivery creation
    V50R0002       Collective processing for delivery creation
    V50R0004      Calculation of Stock for POs for Shipping Due Date List
    V50S0001      User Exits for Delivery Processing
    V53C0001      Rough workload calculation in time per item
    V53C0002      W&S: RWE enhancement - shipping material type/time slot
    V53W0001     User exits for creating picking waves
    VMDE0001     Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002     Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003     Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004     Shipping Interface: Message SDPACK (Packing, Inbound)

  • Changing basic finish date in Preventive maintenance orders

    Hi Experts,
    My requirement is to block PP work centre when maintenance schedule the equipment for preventive maintenance. I am making system condition as zero in generated preventive maintenance order but basic finish date is not changing in the order automatically. Can anybody please explain how to bring this? Finally my requirement is system should change basic finish date and time as time given in operation of task list.
    Thanks in advance.
    best regards,
    Srinivas M

    Hi Praveen,
    I have done all setting and tested but there is no change.
    My client requirement is like this - whenever maintenance plans are scheduled, for the scheduled dates, production capacity should not be considered by production. We could do this for breakdown orders but not happening for PM orders unless we change the finish date.
    The issue is to get the finish date automatically when scheduling maint.plans with respect to values given in operations. Please suggest how to get the  basic finish dates automatically.
    best regards,
    -Srinivas

  • IPhoto change time and date does not work with Flickr

    Hello everyone,
    In my iPhoto librairies, I do change my photo date and time to set them we they were actually taken. Here, I'm refering especially to photos which are:
    * scanned photo
    * stiched photo
    The issue is:
    When I share these photo on Flickr, Flickr sort them with the previous date time setting, even if I have selected to change the original file in iPhoto.
    So it is painful to end up seeing that all the work done on iPhoto is not reflected elsewhere.
    This issue can only be in iPhoto as the old date time should be swapped with the new one.
    Let me know when the fixed will be implemented so I stop loosing precious time editing photos!
    Regards,
    Francois

    I have an Access Database created with Access 2010 installed on a machine running Windows 8 using the Access 2010 Runtime code. For the most part the database works but all reports that require a date in the header come out with ##error. Works fine
    with full access on any other machine. Just this one were we are using Runtime. Any ideas?
    Make sure you don't have Date used as a Field Name, as it is a Reserved Word in Access and can cause unpredictable behavior.
    Also make sure you have compiled the VBA code, before using the Runtime version.
    Have error handling in place, to capture errors in your DB.
    Hope these pointers help,
    Daniel van den Berg | Washington, USA | "Anticipate the difficult by managing the easy"
    Please vote an answer helpful if they helped. Please mark an answer(s) as an answer when your question is being answered.

  • ITunes 11 changes artist and album information

    Since iTunes 11 I cannot rename artist name and album information and have it stick.. I sort by last name and always delete the sort information in the sort tab.  After restarting my Mac I find the information in sorting has reappeared and the artist name is again sorted by first name in the library.  In the info tab, the artist name is still listed last-name-first, and the album info is as I changed it..  How can I hack iTunes 11 to leave the sorting information blank?

    Yes, others are seeing this. Something in purchased media (I am pretty sure this has only happened with purchased media) is periodically checking back with the iTunes Store and resetting the tags in the iTunes library file but not in the actual media files (metadata are stored in both). I haven't seen a truly systematic diagnosis of the issue (I use an old iTunes and have no iTunes account so I can't test anything myself). There are temporary workarounds but tags will still revert after a time. 2014 discussion about edited tags for Store purchases reverting to originals - https://discussions.apple.com/message/26077896#26077896 - edited tags are still present in the media file but revert to the originals in the iTunes library file. Workaround is to refresh tags so media file tags are re-read and used in library file. https://discussions.apple.com/message/26193185#26193185 Send feedback to Apple about this so they know it is an issue they need to investigate: http://www.apple.com/feedback/itunesapp.html Don't expect an immediate solution but maybe the next time they update the software it may be resolved.

  • Program to change pa0002 and pa0006 after production copy

    Hello Pls can some one give me code to change the info type pa0002 and pa0006 after system copy.
    Regards
    Meghana

    Hi Meghana,
    Can you elaborate about this requirement?
    You can access PA0002 and PA0006 using SE16 but what do you need to change?
    Arti

  • Changing a shot-date without losing the order in PSE8

    I'm a new user of PSE8 and have tripped over an annoying problem.
    I have a couple of thousand old family photos that I had scanned and am now organing.  Besides the normal tagging and adding a caption, I want to override the scanned date (which is what PSE thinks was the shot-date) with our best guess at when it was really shot.  That can be 80 years ago.  So I right click the photo, choose "Adjust date and time" option, and revise the date.  Works like a champ, except...
    Except when I do, PSE8 automatically and immediately reorders the photo by date.  So now when I want to go to the next photo in the set I'm working on and click forward, I get some other photo I've already worked on, not the next one I was expecting.  As you can imagine, the more photos I work on, the more time it takes to sort through all the photos previously date-changed to find the next photo yet to be date-changed.
    Is there a way to tell PSE8 to display my photos in order of name rather than in order of date shot?  The scanner service I used automatically created file names with an ID and a sequence number.

    PSE8 gives me two display options that I can find -- oldest first, and newest first.  It seems (reasonably so) that the date the photo was scanned is interpreted as the date it was shot.  So when I use PSE8 to change the date the photo was shot, the photo instantly gets re-ordered among all the photos I have.  Normally that would be fine, because after I put in the correct date for all my photos, I do want to display them in date order.  But I don't want them in date order when I have just loaded 100 newly scanned photos into organizer and I want to spend an hour changing the date on each one in turn.
    I was hoping to find a third display option -- file name sequence.  Doesn't seem to be there.  If not, can any of you PSE gurus think of a way to temporarily keep a set of newly scanned, newly loaded photos in their original sequence long enough for me to go through them one-by-one and change the date?
    Jim in San Francisco

  • Change Name and Date format in PE51

    Hi All,
    I have a requirement to change the employee's name to upper case in PE51. And also I need to split the date as DD, MM, YYYY and place in respective boxes in the form.
    Can I change the character to Upper case and split the date in PE51.
    Please suggest me on this. Your help will be highly appreciated.
    Thanks in Advance......
    Archana.

    Hi Archana,
    did you find a solution on this one?
    Thanx in advanced!
    Kind Regards,
    Gerardo J

  • Project Server 2003 Change database and connection information

    I am working on Project Server 2003. I want to connect the running server to a different project server database and change database account information. How best to do it.

    Hello,
    You can do this with the edit site tool. See the following Kb for full details:
    http://support.microsoft.com/kb/905386
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS

  • Condition type change quantity and net value at sales order

    Hi Experts,
    I wanted to only ALLOW sales order for RK type (invoice correction) condition ENABLED to change (qty + net values). However i wanted to DISABLED condition changes (qty+net values) in any others type of  sales order.
    i have maintained SD->Basic function->Pricing->Pricing control->define condition type->maintain condition type-(changes which can be made) in my current setting is
    1) manual entry = C (manual entry is priority)
    2)hdr condition = no check
    3) item condition = check
    4) delete = check
    5) amount/percent = check
    6) value = check
    7) qty relation = check
    8) Calc type = check
    Thank you.
    Regards,
    Yong Kok Wah
    material              qty                cat            value
    1234                    2                 G2N           18.40
    1234                    2                 L2N            18.40-
    1) System will auto create with 2 item category, is it true?
    2) How can i change the net value? Because the actual value suppose is 17.00
    Thanks & Regards,
    Yong Kok Wah

    yes , that is standard functionality only.
    One is for Credit and second is for Debit note.
    If you want to change the price you can change it manually.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/dd/55fede545a11d1a7020000e829fd11/content.htm

Maybe you are looking for