Changing DNS after 9iAS installation

Could anyone share with me how to change the DNS name (which starts with www) that shows the Oracle HTTP Server Components page when a browser is invoked to other desired web page (in which the DNS does not start at www)after the 9iAS installation.
Thank you.

I am having difficulty understanding your sentence ... is it possible to give an example?
There is a ServerName directive in httpd.conf that you could change ... but without understanding the problem I don't want to recommend it.

Similar Messages

Changing DB_NAME after database installation

Hi,
I installed Oracle10g on linux server.
now I want to change the database name DB_NAME for security reasons.
How can i do this? and where all i need to the changes for the database and EM to come back up successfully.
Thanks in advance.

Hi,
this is what i got when i executed the trace file.
SQL> @orcl_ora_13792.trc
SP2-0734: unknown command beginning "/home/orac..." - rest of line ignored.
SP2-0734: unknown command beginning "Oracle Dat..." - rest of line ignored.
SP2-0734: unknown command beginning "*** SERVIC..." - rest of line ignored.
SP2-0734: unknown command beginning "*** SESSIO..." - rest of line ignored.
SP2-0734: unknown command beginning "*** 2007-0..." - rest of line ignored.
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/home/oracle/oracle/product/10.2.0/db_ 1/dbs/initMSDBBK.ora'
CREATE CONTROLFILE SET DATABASE "MSDBBK" RESETLOGS ARCHIVELOG
ERROR at line 1:
ORA-01034: ORACLE not available
ORA-01034: ORACLE not available
ALTER DATABASE OPEN RESETLOGS
ERROR at line 1:
ORA-01034: ORACLE not available
ALTER TABLESPACE TEMP ADD TEMPFILE '/home/oracle/oracle/oradata/orcl/temp01.dbf'
ERROR at line 1:
ORA-01034: ORACLE not available
SP2-0734: unknown command beginning "*** 2007-0..." - rest of line ignored.
SP2-0734: unknown command beginning "SO: 0xa82f..." - rest of line ignored.
35
What is wrong? and How can i fix this error?
Thanks in advance,
Philip.

SCCM 2012 R2 Agent - Change Language after offline Installation from Agent

Hi there,
we install windows 7 with offline image and integrated clean sccm agent install.
But some machine, all in german, install the agent in english but why.
for a short solution, is it possible to change the language to german?
with best regards
aaj

Examine ccmsetup.log and see if the German .mst is found and installed at all.
Torsten Meringer | http://www.mssccmfaq.de

After successful installation of 9ias release 2 version 9.0.2.0.1

Hi
After successful installation of 9ias release 2 version 9.0.2.0.1 in the service following services are missing (oracle_home9ias122http_server , form server and reportserver ) which has to be present as per old version installation but in new version(9.0.2.0.1) it is not there is anyone has any idea regarding this what one should do to get those sevices ready.
regards
nasar zia

Since you don't mention operating system, we assume you use Microsoft Windows something-or-other.
In which case, you open a command prompt, enter
sqlplus /nolog
connect / as sysdba
startup
exit
and post the entire console session.
(Replacing the 'something-or-other' with 'version and service pack' in our public knowledge base would be very useful as well.)

User exit to change user status in IQ01/02 after full installation EG31

Hi Experts,
In iq01 there are two fields 1 device status 2 user status . device status will be automatically changed (avlb to insl) by system after full installation but i need to change the user status (AVLB, NTAV) in iq01.I have created one bdc for iq02 and that will be properly changing the staus if i run seperately but when i am calling this bdc in user exit(EDMDI001,EDMDI002,EDMDI003) this shows one error '
device is already blocked bu user ---" reason being i have to use that device at the time of full installation and user exit that will change the staus also working on the same device during full installaion .
So Please resolve.
Thanks in advance
Edited by: dilipgupta on Jan 12, 2011 3:02 PM

Hello
dilipgupta
try this:
Exit Name           Description
E07                 IS-U: Geräteinstallation und Anlagenstruktur
EDMDI001            Kundeneigene Vorschlagswerte für Einbau, Ausbau, Wechsel
EDMDI002            Kundeneigene Prüfungen für Einbau, Ausbau, Wechsel
EDMDI003            Kundeneigene Daten zur Warenbewegung bei Ein-und Ausbau
regards
Chris

Changing domain name after 12i installation

Hi all,
I misspelled my domain name during the 12i installation on Linux platform. i know it can be done by changing the context files of both application tier and database tier and running autoconfig after that, But i don't know the exact procedure to do it. Metalink note 387859.1 isn't very helpful to me. There are some notes for 11i on metalink but those are not helpful. Can any body tell in few straight forward steps how to change the domain name after 12i installation. Any help appreciated.

I misspelled my domain name during the 12i installation on Linux platform.Was the installation successful? Did the post installation steps complete successfully?
But i don't know the exact procedure to do it- Deregister the current database/application server
- Update the AutoConfig Context files (database and application)
- Shutdown the Applications Services
- Reseed the Net Services Topology Model ***
- Start the Applications Services
Check the following note (Under Net Services Section) for the required steps to deregister a database/applications tiers from the Net Services Topology Data Model:
*** Note: 387859.1 - Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=387859.1

Error starting the 9iAS installer on Windows 2000 on P4 laptop

I am having problem running 9iAS Installer on my P4 Laptop.
any solution?

Hi
I have successfully installed Oracle products in P4 hardware configuration and there is a know bug in Oracle & P4. Follow these steps below and I am sure that you will be successful in installing Oracle on P4.
Background:
When installing and configuring Oracle 8i to support a Syllabus Plus timetabling application on a Pentium 4 Server with Windows 2000 Advance Server, the following issues were encountered:
1.     The Oracle 8i Universal Installer (OUI) aborts without notice
2.     When installed using either the Oracle 9i OUI or the patched 8i OUI downloaded from Oracle Corporation, errors occurred during installation and java based configuration tools such as the Database Configuration Assistant and the Network Configuration Assistant would not run.
Problem Causes
Oracle Corporation have documented the following known issues:
1.     The OUI 8.1.x fails to recognize the P4 processor and aborts without notice.
2.     The OUI 8.1.x or above has problems on machines that use the Sun JRE and Symantec JIT. Windows 2000 (all versions) and Netware platforms are affected by this.
Work Around
The following work around has been used successfully at the Northern Territory University to overcome these problems.
     1.     Install Oracle 9i patched installer available from Oracle Technology Network website on the machine running on Pentium 4 Processor.
     2.     After installing Oracle Universal Installer, open file oraparam.ini and make the following modifications: (Assuming CD-ROM Drive is d: and you are installing Oracle from CD-ROM)
     a.     Change the Source= line to use the full path to the CD instead of relative path. (i.e. Source=d:\stage\products.jar)
     b.     Change the JRE_Location line to use the full path to the CD instead of relative path. (i.e. JRE_Location=d:\stage\components\oracle\swd\jre\1.1.7\1\datafiles\expanded)
     c.     Change the OUI_Location line to use the full path to the C drive (where the installer is installed) instead of relative path. (i.e. JRE_Location=c:\stage\components\oracle\swd\oui\1.6.0.9.0\1\datafiles\expanded)
     d.     Change the JRE_MEMORY_OPTIONS line to add -nojit as the first argument. (i.e. JRE_MEMORY_OPTIONS=-nojit ms16m ms32m) Other entries should remain same.
     3.     Launch OUI and this will use the modified oraparam.ini file and pick up the information from the CD-ROM. (since the absolute locations are specified)
     4.     Choose the custom install and choose not to create the database during the install. This way, the DBCA will not be launched during installation.
5.     The Net8 Configuration assistant will still be launched and there is no way to suppress it. If you need to kill it due to installer hanging then in the configuration tools window highlight the Net8 Configuration Assistant and click Stop. If this does not work then look for the most recent JRE process using task manager and kill it manually. Note: The OUI itself will also have a jre process. Make sure to kill the only the most recent process.
6.     After killing the configuration tool, continue through the installation to the End of Installation screen. We can modify the configuration tool to use this option nojit.
     7.     Once installation is complete, each of the following files in the ORACLE_HOME needs to be modified:
Each file will contain a command similar to the one following, which should be modified to include the option -nojit.
Eg: Command=(c:\program files\oracle\jre\1.1.7\bin\jrew nojit classpath.
     a.     assistants\dbca\dbassist.cl
     b.     assistants\dbma\dbmig.cl
     c.     assistants\ifa\ifa.cl
     d.     bin\owm.cl
     e.     ldap\oidamdin\oidadmin.cl
     f.     network\tools\netasst.cl
     g.     network\tools\netca.cl
     h.     owm\install\instelogin.cl
     i.     owm\install\instowm.cl
This (-nojit) is the only modification required to enable the configuration tools. After these changes the configuration tools like Net8CA and DBCA can be launched from the start menu.
Note: if your Oracle server is already installed and running but configuration tools are not running then just edit these files mentioned above (from a to i) and then launched configuration tools, they all will work.
Thank you
Amit

Tecra 9000: After SP2 installation the Yamaha sound driver does not work

Hi,
I own a Tecra 9000, with a Yamaha AC-XG sound card.
The problem is that since I installed Windows XP with SP2 included, I lost my sound.
I know also that Toshiba is aware of this situation and they have managed to post a solution for it. I've tried this solution:
Detail:
The Yamaha AC-XG driver uses PortCls function for checking the operatingsystem version. XP Service Pack 1, PortCls function is changed, then the Yamaha driver cannot get operatingsystem version correctly. The operatingsystem provides the version for Windows 95. Therefore the Operatingsystem has a blue screen. Therefore Microsoft added the workaround and illegal drivers are blocked from working on SP1. This issue also happens Windows XP SP2.
Yamaha already provides the fixed drvier to Toshiba. The fixed driver version is the following;
yacxg.sys 6.13.10.2152 with software synthesizer
yacxgc.sys 6.13.10.3152 without software synthesizer
How to fix this issue:
Install the fixed driver on a system before/after installing Windows XP Service Pack 2.
Install steps:
(1) Unzip an attached file on your hard disk.
(2) Run SETUP.EXE
(3) Click the Next button.
(4) Choose "Yes, I want to restart my computer now" and click Finish.
A toshiba engineer told me that first of all I needed to install the old driver "5.12.01.3141", and it worked out ok, but still no sound.
And then he told me to install the version "6.13.10.2152", but this went wrong. I've got the error message "Driver was not installed".
I already tried lots of different drivers, including generic and yamaha drivers.
Please tell me a good solution for this issue if possible.
Thank you very much,
Hugo

Hi Hugo
It seems today is your lucky day ;)
Thanks to Toshiba because the Toshiba computer knowledge base is a really useful area and I have found many useful document and solutions!!!
I found also a solution for your tiny issue ;)
As you said the problem is the Microsoft service pack 2. The sound driver makes some troubles after the installation of SP1 or SP2 and therefore the update is necessary!!!
Please take a look here:
Windows XP Service Pack 1a or Service Pack 2 incompatible with existing Yamaha sound driver
http://ftp.toshiba.ca/support/techsupport/tsbs/all/-TSB000805.htm
Good luck

How to add DNS entry Post Installation in Solaris 10?

Hi, I have installed Solaris 10 without mentioning the DNS entry while installation. How do I add that now in order to make that Solaris 10 to get connected to Internet ?
Thanks in Advance.
Girish Prabhakara.

Solaris 10 changed the way that some things work regarding networking, but this should still work.
1. Change the hosts: line in /etc/nsswitch.conf to include dns.
For example, change:
hosts files
to
hosts files dns
2. Create /etc/nsswitch.conf with the IP addresses of your DNS servers:
Example:
nameserver 192.168.1.100
nameserver 192.168.2.100
3. kill -HUP 1
4. Run nslookup or ping another server via host name (not IP address) to determine if the system is properly communicating with your DNS servers.

Everything keeps freezing/crashing after Mavericks installation on MacBook Pro

Everything keeps freezing/crashing after Mavericks installation on MacBook Pro.
It started with Photoshop, then Safari, and now the Kinect sensor.
Mavericks is the worse thing that happened to me I have a thesis project to work on!
What can I do?
How can I remove Mavericks and go back to Mountain Lion?
Thanks

Hey StephSassine,
First, I would run through these steps:
Your computer’s startup disk may not have enough free disk space. To make disk space available, you can move files to another disk and then delete files you no longer need on the startup disk:
Increase disk space
http://support.apple.com/kb/PH10677
If that doesn't work, you may need to repair your computer’s disk in Disk Utility:
Choose Apple menu > Software Update to make sure you have the latest version of Mac OS X.
Software updates sometimes change a file’s permissions to improve security, so updating your software can solve some permissions problems.
Open Disk Utility, in the Utilities folder in Launchpad.
Select the disk you want to check.
Click First Aid.
Click Repair Disk Permissions to test and repair permissions.
via: Disk Utility 12.x: Repair disk permissions
http://support.apple.com/kb/PH5821
If that doesn't help resolve the issue, you can revert to a previous OS X version:
OS X Mavericks: Revert to a previous OS X version
http://support.apple.com/kb/PH14176
Sincerely,
Delgadoh

Strange behavior in apps/monitor refreshing after theme installation

Good times of the day everyone!
I'm very new to archlinux and ArchLinux community (as you can see, this is my 1st post here).
I use dwm and was playing around with themes.
I found a GTK Theme - Moka which really suited my taste and installed it.
But for some reason, after the installation, applications started showing stuff strangely (or maybe monitor refreshing is going strange, i don't really have an idea of what's happening).
-Change in behavior of applications
---Midori:
------ Every time i switch between tags, strange big black box appears on the page. To get rid of it I have to scroll down-n-back the page;switch back-n-forth between workspaces; select all and deselect all in the page; click to adress bar.
------ When Opening links/sites|Refreshing the pages - big black box shows up and goes away/sometimes doesn't go away.
---Pidgin:
------ Every time I receive a new message, the text turns into a box of strange mix of colors
Here are the pictures:
Would appreciate it if anybody would help me to solve this problem.
Last edited by theimpaler (2010-03-07 08:54:12)

Update:
I've noticed one more strange thing, in Midori if I have only one tab opened, no black box appears.
EDIT:
Never mind.. I guess it was the error in theme itself.
Last edited by theimpaler (2010-03-07 12:07:23)

ITunes does not start after Lion installation

hi,
after upgrading to the latest iTunes version and to Lion, I get "The file “iTunes Library.itl” cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?".
Precise:
I upgraded iTunes to the latest version (from the previous one, I am a regular upgrader) yesterday afternoon around 15:00, then I worked several hours on my iTunes library (including some new buys). At night I then installed Lions. After starting Lions, iTunes does not start anymore.
I have read the threads about copying old library files from the "previous iTunes Libraries" folder. But if I do that, I will loose the entire afternoon work. Anyway it I cannot understand why iTunes now believes to be older after Lion installation than before...
Can somebody please help?
br
a

Hi,
after backing up, I downloaded the latest version again and it really worked.
Strange that evidently the Lion installation did revert yesterdays upgrade from iTunes. Now it works, including all my latest changes from yesterday.
Case solved:)
br
a

Ciscowork3.2.1 daemon manager is not working after patch installation

Ciscowork 3.2.1 daemon manager is not working after patch installation
Hi Team
Ciscowork 3.2.1 daemon manager is not working after patch installation.
C:\Documents and Settings\Administrator>net start crmdmgtd
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
Also I checked syslog.log and it is showing below error
an 17 14:39:34 127.0.0.1 100: <28> dmgt[1316]: 2507(W):Daemon manager anonymous user has not been set up: 00000569
I reset the casuser password and restarted the service but still no luck....
Please suggest.
With Regards,
neena

Neena,
Check the properties of casuser under Start > Settings > Control Panel > Administrative Tools > Computer Management > Local Users and Groups > Users and make sure it is not disabled or locked out. The only thing checked should be "Password never expires". Change anything required and reset casuser.

Problems running avctl after successfull installation of audit vault

Hi all,
after successful installation of audit vault, I am able to connect to the instance AV with sqlplus and with the dabase console.
But starting the avctl or questioning the status of the avctl with "avctl show_av_status", I always receive the following error:
C:\oracle\product\10.2.2\av_1\jdk\bin>avctl start_av
Exception in thread "main" java.lang.Exception: Invalid Oracle JDBC url
at oracle.av.avca.CommandArguments.setOracleProperties(CommandArguments.java:281)
at oracle.av.avca.CommandArguments.processArguments(CommandArguments.java:667)
at oracle.av.avca.Avctl.startCTL(Avctl.java:70)
at oracle.av.avca.Avctl.main(Avctl.java:318)
OS: Windows XP Prof 5.1 SP2
Audit Vault DB-Version: 10.2.0.3
Had anybody faced this problem before?
Thanks a lot in advance for your answers
Stefan

I had the same error, On the OUI log there was an error on the instalation of the Database Vault (although the installation finished OK), check if you have the same error output:
<LOG>
MANAGE_INSTANCE start RDBMS result=C:\oracle\product\10.2.2\av_1\bin\dvca_start_rdbms.bat,1,
Executing task SQLPLUS_CATMAC
connect SYS:java.sql.SQLException: ORA-01031: insufficient privileges
Executing task UNLOCK_DVSYS
Error executing task UNLOCK_DVSYS:java.lang.NullPointerException
Executing task LOAD_NLS_FILES
Error executing task LOAD_NLS_FILES:java.lang.NullPointerException
Executing task ACCOUNT_CREATE_OWNER
Error executing task ACCOUNT_CREATE_OWNER:java.lang.NullPointerException
Executing task GRANT_CONNECT_OWNER
Error executing task GRANT_CONNECT_OWNER:java.lang.NullPointerException
Executing task GRANT_ADMIN_DB_TRIG
Error executing task GRANT_ADMIN_DB_TRIG:java.lang.NullPointerException
Executing task GRANT_ALTER_ANY_TRIG
Error executing task GRANT_ALTER_ANY_TRIG:java.lang.NullPointerException
Executing task ACCOUNT_CREATE_MANAGER
Error executing task ACCOUNT_CREATE_MANAGER:java.lang.NullPointerException
Executing task GRANT_CONNECT_MANAGER
Error executing task GRANT_CONNECT_MANAGER:java.lang.NullPointerException
Executing task PASSWORD_CHANGE_DVSYS
Error executing task PASSWORD_CHANGE_DVSYS:java.lang.NullPointerException
Executing task PASSWORD_CHANGE_DVF
Error executing task PASSWORD_CHANGE_DVF:java.lang.NullPointerException
Unable to login to SYS account.. java.sql.SQLException: ORA-01031: insufficient privileges
. Error during post-installation processing. java.lang.NullPointerException. Error during post-installation processing. java.lang.NullPointerException.
</LOG>
Looks like the problem was that I changed sys and system password on the dbca final windows, that maybe wronged the instalation scripts.
When re-installed the AV Server I just press ok on that window without changing any password and it worked.
Hope that Helps.
Alfonso Leon

Has something changed in the Arch Installation?

I've seem to run across a few things when I install Arch now. I've installed Arch many times on the exact same computer with the exact same hardware but I'm experiencing some issues. I always use the FTP install.
First, I have no colors anymore when I edit anything in nano (after the installation). Why is that? All i have is a completely fresh install, but no colors. That never used to happen. I haven't changed anything.
Second, even though I select during the install which mirror i would like to keep as my 1st mirror, pacman -Syu will not work. I have to go into into the mirrorlist file and uncomment a mirror. Now that is not a problem at all, but why has that changed?
On top of those things, I have problems now getting GDM to load my xfce4 session, and even without GDM, I can only load xfce4 thru the root login, not my own, and when I install ttf-ms-fonts, i get a error that says the package has different permissions than the /tmp directory, which has never happened before. I think the GDM thing is also a permissions problem for some reason.
But why oh why has Arch changed on me?! Help!

Nano syntax highlighting is now stored in /usr/share/nano.
I added the following lines to /etc/nanorc:
## Arch PKGBUILD
include "/usr/share/nano/pkgbuild.nanorc"
## Syntax highlighting in xorg.conf
include "/usr/share/nano/xorg.nanorc"
## Generic conf/rc/sh file syntax highlighting
include "/usr/share/nano/conf.nanorc"
Here are the 3 Arch files I created:
cat /usr/share/nano/conf.nanorc
# Generic conf/rc/sh file syntax highlighting
syntax "conf/rc/sh" "conf$|rc$|sh$"
color white ".+"
color green "^#.*"
cat /usr/share/nano/pkgbuild.nanorc
## Arch PKGBUILD files
syntax "pkgbuild" "^.*PKGBUILD$"
color green start="^" end="$"
color cyan "^.*(pkgname|pkgver|pkgrel|pkgdesc|force|url|license|install|source|md5sums|groups|backup|depends|makedepends|conflicts|provides|replaces).*=.*$"
color brightcyan "\<(pkgname|pkgver|pkgrel|pkgdesc|force|url|license|install|source|md5sums|groups|backup|depends|makedepends|conflicts|provides|replaces)\>"
color cyan "\.install"
color brightwhite "=" "'" "$" "$" "\"" "#.*$" "\," "\{" "\}"
color brightcyan "(\$|\$\{|\$$)(pkgname|pkgver|pkgrel|pkgdesc|force|url|license|install|source|md5sums|groups|backup|depends|makedepends|conflicts|provides|replaces|startdir)(|\}|$)"
color brightred "build"
color brightred "\<(configure|make)\>"
color red "\<(DESTDIR|PREFIX|prefix|sysconfdir|datadir|libdir|includedir|mandir)\>"
cat /usr/share/nano/xorg.nanorc
## syntax highlighting in xorg.conf
syntax "xorg" "xorg\.conf$"
color brightwhite "(Section|EndSection|Sub[sS]ection|EndSub[sS]ection)"
# keywords
color yellow "[^A-Za-z0-9](Identifier|Screen|InputDevice|Option|RightOf|LeftOf|Driver|RgbPath|FontPath|ModulePath|Load|VendorName|ModelName|BoardName|BusID|Device|Monitor|DefaultDepth|View[pP]ort|Depth|Virtual|Modes|Mode|DefaultColorDepth|Modeline|\+vsync|\+hsync|HorizSync|VertRefresh)[^A-Za-z0-9]"
# numbers
color magenta "[0-9]"
# strings
color green ""(\\.|[^\"])*""
# comments
color white "#.*"

Changing DNS after 9iAS installation

Similar Messages

Maybe you are looking for