Changing domain name after 12i installation

Hi all,
I misspelled my domain name during the 12i installation on Linux platform. i know it can be done by changing the context files of both application tier and database tier and running autoconfig after that, But i don't know the exact procedure to do it. Metalink note 387859.1 isn't very helpful to me. There are some notes for 11i on metalink but those are not helpful. Can any body tell in few straight forward steps how to change the domain name after 12i installation. Any help appreciated.

I misspelled my domain name during the 12i installation on Linux platform.Was the installation successful? Did the post installation steps complete successfully?
But i don't know the exact procedure to do it- Deregister the current database/application server
- Update the AutoConfig Context files (database and application)
- Shutdown the Applications Services
- Reseed the Net Services Topology Model ***
- Start the Applications Services
Check the following note (Under Net Services Section) for the required steps to deregister a database/applications tiers from the Net Services Topology Data Model:
*** Note: 387859.1 - Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=387859.1

Similar Messages

  • Is it possible to change domain name

    OS: SuSE Linux Enterprise Server 8
    Oracle Version: 10.1.0.2.0
    I have Oracle Database installed on SLES 8.
    Is it possible to change domain name after database is running?
    (Not in live production yet)
    If yes where I need to make changes?
    Regards,
    D

    for the database, the dns domain is of no interrest. the parameter db_domain could be change dynamically, but it does not have to match the dns domain. In your sqlnet.ora, you can also define NAMES.DEFAULT_DOMAIN and the domain name in tnsnames.ora. But it does not have to match the dns domain.
    HTH
    Laurent

  • How to change (NT)Domain Name after installed ERP?

    Hello,
    We are planning to change (NT) Domain Name on environment of already installed ERP/BW(WAS 6.40)/SRM/SolMan(NW 7.0).
    We know SAP recommend that customer should be Re-install or System-copy SAP-System if the Domain name is changed after installed systems.
    However, we do not have enough time and budget for doing that.
    Questions:
    1). If the (NT) Domain name will be changed, we only need to change the
    OS users of service for SAP-System?
    (I think that it is needed to change only OS-users of SAP-service. Is there other setting for that?)
    2). The method of only changing users of SAP-service is not supported in this case?
    (The customer will be not taken the SAP-Official support after doing that?)

    Dear
    Changing domain name is not supported by SAP if done in a productive environment (after systems have gone live).
    You will probably not get support by SAP after you change the domain name once system is live.
    There are a bunch of changes you will need to perform as well.
    The domain name is probably existing in the RFC's and you cannot change all of those through SM59.
    You will need to update those entries at Oracle level.
    SAP parameters containing domain name
    Java environment where domain name is contained
    Reset hostname buffer
    Service marketplace
    SAP Logon
    STMS
    Monitoring perhaps, non SAP job scheduling
    Please reward points accordingly
    Kind regards
    Tom

  • Pb connecting from client to database after changing domain name

    Hi,
    I've got 3 databases wthis 3 listeners. all worked well since we change domain name. database server is in DMZ and is reconize witn 2 IP adresses.
    I can ping with tnsping but when I run sqlplus user/passwd@ORACLE_SID I've got this message : ERROR:
    ORA-12535: TNS : le dÚlai imparti Ó l'opÚration est ÚcoulÚ
    on local host this command run well and connect to database.
    is there somebody that knows this problem and its solution?
    Thank you for your help.
    PS: I'm on oracle 9.2.0 and windows200 server and client

    I've got this message in listener.log
    Démarré avec pid=3028
    Ecoute sur : (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
    Ecoute sur : (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=bam_sgbd.imelios.com)(PORT=1522)))
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    19-MAR-2004 14:21:33 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.80.180)(PORT=2032)) * establish * ADRPRODR * 0
    19-MAR-2004 14:34:36 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=C:\oracle\ora92\bin\sqlplus.exe)(HOST=BAM_SGBD)(USER=BAM_SGBD))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.80.223)(PORT=2394)) * establish * ADRPRODR * 0
    19-MAR-2004 14:40:53 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.80.180)(PORT=2195)) * establish * ADRPRODR * 0
    19-MAR-2004 14:44:18 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=C:\oracle\ora92\bin\sqlplus.exe)(HOST=BAM_SGBD)(USER=BerPre))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.80.223)(PORT=2809)) * establish * ADRPRODR * 0
    19-MAR-2004 14:57:52 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=C:\oracle\ora92\bin\sqlplus.exe)(HOST=BAM_SGBD)(USER=BAM_SGBD))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.80.223)(PORT=3413)) * establish * ADRPRODR * 0
    19-MAR-2004 15:11:47 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.80.180)(PORT=2433)) * establish * ADRPRODR * 0
    19-MAR-2004 15:55:59 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=IP_ADRESSE)(PORT=2561)) * establish * ADRPRODR * 0
    19-MAR-2004 15:56:26 * (CONNECT_DATA=(SERVICE_NAME=ADRPRODR)(CID=(PROGRAM=c:\oracle\ora92\bin\sqlplus.exe)(HOST=U0011001)(USER=BerPRE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=IP_ADRESSE)(PORT=2568)) * establish * ADRPRODR * 0
    this seems to work pas on client connection doesn't arrive

  • HOW TO CHANGE HOST NAME AFTER SAP IS INSTALLED?

    i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

    As far as my understanding goes it can be done. The only problem is SAP is not recommending it. Still if you want to give it a shot please go through the link to learn more and step by step guidance.
    [Click Here|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
    Also take a look  at this SDN thread, you might find something interesting.
    [click here for SDN thread|How to change the hostname was set/defined in SAP system?;
    Edited by: santra.anirban on Sep 13, 2010 10:45 AM

  • Cisco ISE change Domain Name

    Our ISE deployment was setup with our internal domain name of csi.corp, when presenting the guest CWA this is the domain name the is presented to
    the guest.  We would like for this to be out public domain and a valid certificate.  From what I have gathered the web portal https certificate must contain the FQDN of the ISE node, therefore I would need to change the domain name on the server(s).  I have found posts that some have changed the domain name after deployment without any adverse results, is this possible?  We are currently integrated with our corp AD and able to utilize this the EAP authentications.  We have 2 nodes in our deployment, is it possible to change the domain name to our public domain without a rebuild?
    Thanks,
    Joe

    Hmm, unless something has changed I don't believe this would work because:
    - Even though the CN doesn't have to be an exact match of the FQDN, I believe that the domain suffix in the CN still must match the domain suffix in the FQDN. So you can have many different values and domains in the SAN fields but the domain in the CN field must match the domain specified in the FQDN. I don't have any certs to test this with now but I am pretty sure that even though the CSR generation would work, the process will fail when trying to import the cert. 
    - Is ".local.corp" a public domain? It doesn't sound like it but perhaps it is :) However, if it is not, then many public CAs won't issue you a public certificate for a private domain. You can definitely give it a try and see what they say :)
    Let me know what you find out!
    Thank you for rating helpful posts!

  • MAY I CHANGE HOST NAME AFTER SAP IS INSTALLED?

    i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

    Hi,
    Do not change the hostname after the installation, if you need to then you have to perform system copy.
    Refer: Note 8307 - Changing host name on R/3 host: What do you do?
    Regards,
    SBK

  • How to change domain name from "LocalHost" to ipaddress in Jdeveloper?

    Hi
    When i run any application from JDeveloper, the page opening with the URL keeping "*LocalHost*" as a domain name,
    eg: http://*localhost*:7101/Testing/faces/index.jsf
    How can i change the domain name from "localHost" to my system's ipaddress. So that whenever i execute the page, the page should open with the ipaddress and not with "localhost", like http://*10.34.65.175*:7101/Testing/faces/index.jsf
    Regards
    Raj

    Thank you Timo.
    I changed domain name from "localhost" to ipaddress as you said, after that the server stopped working. Unable to run any application.
    Then I changed it back to "localhost" and its working fine.
    I am doing it for 2 reasons,
    1) With localhost as domain name, I am unable to open ADF mobile browser application in Android emulator.
    2) Unable to do remote debugging. Hope this could be the reason.
    Regards
    Raj

  • Changing domain name

    Hello All,
    We have oracle Database installed on RED HAT AS 3.1.
    Database version is 9.2.0.5.0.
    We also have two web servers connected to above database server.
    Just before live production, Management asks me to change domain name.
    1) My question is “Does changing domain name effect any thing from Oracle DB perspective"?
    2) Do I need to configure any thing from Oracle database?
    Regards,
    Diana Wales

    check global_name view and set it according to new settings
    Select * from global_name:
    update globale_name set global_name='NEW_NAME' ;
    commit;
    you should log in as sys

  • Change domain name BPC 10 for MS

    Hi,
    We will change domain name so I will need to change that in BPC for all the end users, which should not be a problem but for the service users running BPC, BPCInstall, BPCAdmin and BPCUser I guess it can/will be a problem.
    Option 1 - reinstall SAP BPC
    I have read a sap note(1451175) where they suggest to reinstall SAP BPC,http://service.sap.com/sap/support/notes/1451175
    and also sap note(1692721),http://service.sap.com/sap/support/notes/1692721
    If I do that the question is can I restore my environment(s) I have today or do they contain the "old" domain name users or is that only stored in the "appserver".
    Option 2 - modify SAP BPC
    Not recommended according to above note.
    Do anyone have any experience in this or suggestions please let me know.
    Brgds
    Mattias Ferling

    Multiple primary zones work fine within you private DNS services, and would be the usual approach for the local DNS server.
    The external (public) DNS services gets another translation and an MX (mail exchange) record that points at your public IP.
    If you're renaming the host itself, you'll reset the name through Server Admin, and then verify the change by launching Terminal.app and issuing sudo changeip -checkhostname command.  If that doesn't work, you might need to reset the host name via the changeip command; see man changeip for details.
    One key piece of all this: your public mail server needs to be an A record, which means your public forward and reverse DNS for your mail server and your MX record and your public static IP address all match.
    Your mail server will need to enable the new domain as a virtual host; that'll all it to receive mail for the new domain.

  • Will vmware horizon work after change domain name and ip adress and vcenter ?

    Hi
    i have a question
    i have to migrate all of my vmware horizon but for example my domain name is now a.com but i have to migare it to new domain b.comit means my domain name and ip adress will be change also connectios server ip adress vcenter ip adress  now i want to know if my domain name and ip adress change and also all of my vm and vcenter and ... change  will vmware horizon work after these changes ?
    best regards
    Babak

    Horizon View is depended on AD and this task is not trivial.
    What needs to be done depends on your setup and configuration and you will need assist from VMware Support and you should first replicate the setup in a test-environment.
    // Linjo

  • ISE node registering after change domain-name

    At Customer Site I changed the domain name of our 4 ISE server before they were registered to any deployment. I regenerated a self signed certificate and started to register the other nodes to the deployment. This went well for the 2 PSN nodes which have a ip address in a different subnet. I tried to register the presumed secondarry PAN/MnT node and got the following error message "
    Node beiing registerd has FQDN 'ISE-PAN-AP02.office.intern' which cannot be resolved. Please check your DNS configuration."
    My DNS config is in order.
    Can anyone please tell me want possible can be the cause of this?

    Please check these Prerequisites:
    The fully qualified domain name (FQDN) of the standalone node that you are going to register, for example, ise1.cisco.com must be DNS-resolvable from the primary Administration ISE node.  Otherwise, node registration will fail. You must enter the IP addresses  and FQDNs of the ISE nodes that are part of your distributed deployment  in the DNS server.
    •The  primary Administration ISE node and the standalone node that you are  about to register as a secondary node should be running the same version  of Cisco ISE.
    •Node  registration fails if you provide the default credentials (username:  admin, password: cisco) while registering a secondary node. Before you  register a standalone node, you must log into its administrative user  interface and change the default password (cisco).
    •You  can alternatively create an administrator account on the node that is  to be registered and use those credentials for registering that node.  Every ISE administrator account is assigned one or more administrative  roles. To register and configure a secondary node, you must have one of  the following roles assigned: Super Admin, System Admin, or RBAC Admin.  See Cisco ISE Admin Group Roles and Responsibilities for more information on the various administrative roles and the privileges associated with each of them.
    •If  you plan to register a secondary Administration ISE node for high  availability, we recommend that you register the secondary  Administration ISE node with the primary first before you register other  Cisco ISE nodes. If Cisco ISE nodes are registered in this sequence,  you do not have to restart the secondary ISE nodes after you promote the  secondary Administration ISE node as your primary.
    •If  you plan to register multiple Policy Service ISE nodes running Session  services and you require mutual failover among those nodes, you must  place the Policy Service ISE nodes in a node group. You must create the  node group first before you register the nodes because you need to  select the node group to be used on the registration page. See "Creating, Editing, and Deleting Node Groups" section for more information.
    •Ensure  that the Certificate Trust List (CTL) of the primary node is populated  with the appropriate Certificate Authority (CA) certificates that can be  used to validate the HTTPS certificate of the standalone node (that you  are going to register as the secondary node). See the "Creating Certificate Trust Lists in the Primary Cisco ISE Node" section on page 12-24 for more information.
    •After  registering your secondary node to the primary node, if you change the  HTTPS certificate on the registered secondary node, you must obtain  appropriate CA certificates that can be used to validate the secondary  node's HTTPS certificate and import it to the CTL of the primary node.  See "Creating Certificate Trust Lists in the Primary Cisco ISE Node" section on page 12-24 for more information.

  • VG224 - some ports show "unregistered" after changing domain name

    hi,
    recently i have changed the domain name of a VG224, before the change, all ports shows "registered" from the CUCM.
    after I changed the domain name from VG224 and CUCM, the VG224 can be registered to CUCM, and some ports can register too...only serveral ports showing "unregistered" in the CUCM. But from the VG224, everything is normal. and call/ fax can be made successfully from those "unregistered" ports.
    anyone has idea what's going on?
    thanks.

    Melany,
    Sorry for the delay,
    I have had a look at bugs etc.
    The only one I can find that may be related is:-
    Change MGCP gateway Domain Name only reset endpoints not whole gateway
    CSCsg39923
    Description
    Symptom:
    Incoming and outgoing calls over an MGCP gateway fails randomly after changing gateway's domain name in CallManager. Sometimes caller receives dead air.
    Conditions:
    The administrator changes the gateway domain name in CCM without stopping Gateway's mgcp service.
    Workaround:
    Reset or reload the gateway.
    Further Problem Description:
    The proper way of changing a gateway's domain name is:
    - Stop Gateway's mgcp service (gateway command: no mgcp)
    - Chnage the domain name in the gateway and in CCM.
    - Start Gateway's mgcp service (gateway command: mgcp)
    Customer Visible
      Save Bug
    ">
    Save Bug
      Open Support Case
    ">
    Open Support Case
    View Bug in CDETS
    ">View Bug in CDETS
    Was the description about this Bug Helpful?
    (0)
    Details
    Last Modified:
    Nov 2,2012
    Status:
    Fixed
    Severity:
    3 Moderate
    Product:
    Cisco Unified Communications Manager (CallManager)
    Support Cases:
    2
    Known Affected Releases:
    (1)
    4.2
    Known Fixed Releases:
    (4)
    6.0(0.9901.37)
    6.0(1.1000.37)
    7.0(0.99999.65)
    1.0(0.98000.42)
    Download software for  Cisco Unified Communications Manager (CallManager)
    Support Cases:
    (2)
    Support case links are not customer visible
    Related Bugs
    Bug(s)
    Community Discussion on CSCsg39923 - Cisco Support Community
    Regards,
    Alex.
    Please rate useful posts.

  • PORTAL DOESN'T WORK (error:WWC-41439) after CHANGED DOMAIN NAME OF MACHINE.

    machine transferred to other location and domain name got changed.I did following
    1)changed the old domain to new domain name in jserv.properties file and also in the httpd.conf file.
    2)I figured out that intable PORTAL30_SSO.WWSEC_ENABLER_CONFIG_INFO$,the value of column LSNR_TOKEN is= "old doamin "
    and LS_LOGIN_URL is =
    http://old.domain:7777/pls/portal30_sso/portal30_sso.wwsso_app_admin.ls_login
    PLease let me know how I can change old domain values with new doamin in this table.I want to be sure that this change will not affect the old portal application.
    PLease try to help resolve the issue ASAP.
    Thanks

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by shahid mateen ([email protected]):
    machine transferred to other location and domain name got changed.I did following
    1)changed the old domain to new domain name in jserv.properties file and also in the httpd.conf file.
    2)I figured out that intable PORTAL30_SSO.WWSEC_ENABLER_CONFIG_INFO$,the value of column LSNR_TOKEN is= "old doamin "
    and LS_LOGIN_URL is =
    http://old.domain:7777/pls/portal30_sso/portal30_sso.wwsso_app_admin.ls_login
    PLease let me know how I can change old domain values with new doamin in this table.I want to be sure that this change will not affect the old portal application.
    PLease try to help resolve the issue ASAP.
    Thanks<HR></BLOCKQUOTE>
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>my concern is I have a portal application which was pointing to old domain and I don't want to lose this application(content area,page,style etc).If I run the ssodatan ,then it will change the content in the table wsec_enabler_config_info$.Please let me know if still it would point to old portal application.<HR></BLOCKQUOTE>

  • Modeler problem after changing domain name

    Hello GURUS,
    I had my BI7 on RHEL5 and MaxDB configured and working with hostname xxxbwd.yyy.pl. Today I had to change domain/host name to xxxbwd.zzzz.yyy.pl. I've changed it in /etc/hosts, changed profile parameter icm/host_name_full to new value and almost everything works.
    I have problem with starting modeler form t-code RSPLAN - it throws IE error "Page not found" and I can see that "old" domain name is called. Where do I have to type in new domain name to make RSPLAN work?
    Regs,
    FS

    Found it myself.
    Report RSPLS_LAUNCH_ADMIN allows to set such things.
    Regs,
    =FS=

Maybe you are looking for