Changing Dump File

When we Export Entire Database,Dump file contains path information of tablespace's Data file.
Is it possible to change data file path in dump.

This forum deals with Oracle Portal Export/Import only. Could you please post this question under Oracle RDBMS Export/Import ?

Similar Messages

DataPump Problem. Automaticaly change dump file name.

Deal All
I have create a plsql block and which will backup the database using datapump.
He is working fine in scheduler but he generates error because it doesnot change
file name every time. Against the following he always generates
'EXPORT%U.DMP' = EXPORT01.DMP file name.
Please tell me how i can change every file name automatically.
Thanks
Abid

Hi,
I have 10.2.0.4 db on windows and want to have a full datapump export every night and want a unique file name but this does not work for me. The script just does not execute. I have even tried this from the command line
par file is
DUMPFILE='expdp_testdb_full.'||to_char(sysdate,'YYYYMMDDHH24MISS')||'.dmp'
JOB_NAME=expdp_testdb_full
LOGFILE="expdp_full_testdb.log"
DIRECTORY=DATAPUMP_DIR
FULL=Y
ESTIMATE=STATISTICS
CONTENT=ALL
PARALLEL=20

Re-Occurring Blue Screen~Dump files included~Please Help~Unable to verify timestamp for ntkrnlpa.exe

Hello,
Starting yesterday I started getting the BSOD. I have uploaded my dump files to this dropbox account:
www.dropbox.com/sh/w3ryago8pfcw2y2/AAAR5i6Crx5q-p--xdESJjnMa
There are lots of them as my PC crashed many times.
I attempted to analyze them with windbg but all I can see is:
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
Also I ran sfc /scannow and it found no integrity violations.
After the first BSOD I was barely able to get Windows to load without another immediate crash. I couldn't boot my PC last night but today seems okay so far. CPU temp was fine, actually quite cool as I had my window open right by the PC with the side off
the case and it was cold last night. Today, so far, seems to be running okay...so far anyways..
Windows update recently installed a driver for my on-board video card (Nvidia GeForce 6150n) on the 18th I think as I started using a 2nd monitor using the on-board card in addition to my PCI Express Ati Radeon HD. To use the second screen, I switched
the primary video in CMOS to on-board instead of PCI-E 16x so the on-board Nvidia card would be enabled.
I also installed brand new ram (4gb DDR2) about a month ago
and a new power supply 2 months ago. The power supply is not "exactly" the same voltage as the one that was in there but it's dang close. But I don't have any power leeching components.
Other than that nothing new has happened. After I got the crash, I tried to enter CMOS yesterday and it glitched out on me twice. I hope it's not my motherboard..
I am willing to do a system re-format as I am running Windows 7 32bit on a 64bit AMD so I wouldn't mind having 64 bit Windows anyways but I'd like to know what the problem is before I do this. Thank you.
Update: Just did a MalwareByte's Anti-Malware scan and no malware but found these items:
Scan Date: 5/22/2014
Scan Time: 6:08:00 PM
Logfile:
OS: Windows 7 Service Pack 1
CPU: x86
File System: NTFS
Scan Type: Threat Scan
Result: Completed
Objects Scanned: 261539
Time Elapsed: 8 min, 10 sec
Processes: 0
(No malicious items detected)
Modules: 0
(No malicious items detected)
Registry Keys: 0
(No malicious items detected)
Registry Values: 0
(No malicious items detected)
Registry Data: 0
(No malicious items detected)
Folders: 2
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0, , [dd97c58f413a74c2503e7106649ec23e],
Files: 9
PUP.Optional.OptimumInstaller.A, C:\Users\Justin\Downloads\Player-Chrome.exe, , [6b090a4a4437d363a05f361717ea718f],
PUP.Optional.Outbrowse, C:\Users\Justin\Downloads\install-flashplayer.exe, , [561ee173fe7d1125edf4d9a443be5aa6],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\icon-128.png, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\icon-16.png, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\icon-48.png, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\jquery-1.10.2.min.js, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\manifest.json, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\tweetwiki.js, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\_DS_Store, , [dd97c58f413a74c2503e7106649ec23e],
Physical Sectors: 0
(No malicious items detected)

Hi,
All of the attached DMP files are of the
WHEA_UNCORRECTABLE_ERROR (124) bug check.
A fatal hardware error has occurred. This fatal error displays data from the Windows Hardware Error Architecture (WHEA).
If we run an !errrec on the 2nd parameter of the bug check (address of the WER structure) we get the following:
BugCheck 124, {0, 867d2024, b2000010, 10c0f}
===============================================================================
Section 2 : x86/x64 MCA
Descriptor @ 867d2134
Section @ 867d22bc
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal
Error : BUSLG_OBS_ERR_*_NOTIMEOUT_ERR (Proc 0 Bank 4)
Status : 0xb200001000010c0f
This is a pretty complicated error compared to other possibilities it could have been, as it implies you have a hardware fault somewhere along the bus (not very definitive on its own).
In our case however, we can go a bit deeper with this one:
0: kd> .formats 0xb200001000010c0f
Evaluate expression:
Hex: b2000010`00010c0f
Decimal: -5620492266238833649
Octal: 1310000001000000206017
Binary: 10110010 00000000 00000000 00010000 00000000 00000001 00001100 00001111
Chars: ........
Time: ***** Invalid FILETIME
Float: low 9.61613e-041 high -7.45059e-009
Double: -7.41853e-068
Now that we have this info, we'd refer to the AMD manual:
63 VAL Valid
62 OVER Status Register Overflow
61 UC Uncorrected Error
60 EN Error Condition Enabled
59 MISCV Miscellaneous-Error Register Valid
58 ADDRV Error-Address Register Valid
57 PCC Processor-Context Corrupt
56–32 Other Information
31–16 Model-Specific Error Code
15–0 MCA Error Code
In our specific case, bit 63 of the status code is set, so it is valid. Bit 62 of the status code is
unset, therefore there's no overflow. Bit 61 implies an uncorrected error has occurred, and Bit 60 implies an error condition was enabled. Last but not least, Bit 57 is
set and implies a corrupted processor context.
If we take a look at the last 15 bits of the binary:
Binary: [trimming] 00001100 00001111
In our case, the MSB in binary (00001100 ), implies a bus error occurred (as I mentioned above). We need to further decode the bits to understand more:
[0000]1100 00001111
0000 = 1PPT RRRR IILL.
PP = Participation Processor, T = Timeout,
R = Memory Transaction Type, I = Memory and/or I/O, and finally
L = Cache Level.
With this said, it appears we actually have a faulty motherboard as the processor seems fine, etc. The only other thing I see possible is bad RAM, which you can figure out whether or not is the case by running no less than ~8 passes of Memtest:
Memtest86+:
Download Memtest86+ here:
http://www.memtest.org/
Which should I download?
You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary
files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).
Do note that some older generation motherboards do not support USB-based booting, therefore your only option is CD (or Floppy if you really wanted to).
How Memtest works:
Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.
The default pass does 9 different tests, varying in access patterns and test data. A tenth test, bit fade, is selectable from the menu. It writes all memory with zeroes, then sleeps for 90 minutes before checking to see if bits have changed (perhaps because
of refresh problems). This is repeated with all ones for a total time of 3 hours per pass.
Many chipsets can report RAM speeds and timings via SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclocked, Memtest86 can test that memory performance
is error-free with these faster settings.
Some hardware is able to report the "PAT status" (PAT: enabled or PAT: disabled). This is a reference to Intel Performance acceleration technology; there may be BIOS settings which affect this aspect of memory timing.
This information, if available to the program, can be displayed via a menu option.
Any other questions, they can most likely be answered by reading this great guide here:
http://forum.canardpc.com/threads/28864-FAQ-please-read-before-posting
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

Error while importing a container dump file

Hi,
I am trying to import a container from one Oracle Server to another server which are located at two different locations. I have exported the container from the first server and FTPed it to the second server and tried to import the same into the second server. While doing this, i got the following message:
Connected to: Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
Export file created by EXPORT:V08.01.07 via conventional path
import done in WE8ISO8859P1 character set and WE8ISO8859P1 NCHAR character set
. importing REPOS_MANAGER's objects into REPOS_MANAGER
. . importing table "XTSYS_EXPORT_OBJECTS" 1 rows imported
. . importing table "XTSYS_IMPORT_IRID_MAPPING"
IMP-00009: abnormal end of export file
IMP-00018: partial import of previous table completed: 1281 rows imported
IMP-00033: Warning: Table "XTSYS_IMPORT_IVID_MAPPING" not found in export file
IMP-00033: Warning: Table "XTSYS_TABS_EXPORTED" not found in export file
IMP-00033: Warning: Table "XTSYS_RM$REPOSITORIES" not found in export file
Import terminated successfully with warnings.
I am able to import the same dump file into another server located in the same location as the Server One without any issues.
One thing that i have observed is: On the Server 2, if a container is already present and the XTSYS_ tables are already populated, when i tried to import this dump file, it asked me "Temporary tables are already populated. Do you want to overwrite them. Otherwise the existing temporaty tables will be used for this purpose". If i clicked No, then it imported the container without any problems, BUT, the new container contents are not the same as found on Server 1's container contents.
Can somebody suggest what could be the problem and how can i import that dump file.
thanks a lot in advance
regards,
Vijay

Vijay,
There is a note <Note:160378.1> on the Oracle Support site: http://metalink.oracle.com.
There are a number of possibilities, the most likely of these is that you are using the wrong import/export utilities for an older or newer database version.
You don't mention which release of Designer you are using, Designer 9i uses the 9.0.1 export/import utilities by default. You cannot use the 9.0.1 export/import utilities against an 8.1.7 database.
If not already installed, install the 8.1.7 export/import utilities from the Oracle 8i Release 3 (8.1.7) Client Cd into a new Oracle Home.
In the Registry, change [hklm]\software\oracle\HOMEx\repos61\EXECUTE_EXPORT
and EXECUTE_IMPORT to point to the 8.1.7 export/import utitilites.
(HOMEx corresponds to your Designer 9i Oracle Home)
A typical value for them would be:
EXECUTE_EXPORT=d:\des_817\bin\exp.exe
EXECUTE_IMPORT=d:\des_817\bin\imp.exe
or
EXECUTE_EXPORT=d:\V817\bin\exp.exe
EXECUTE_IMPORT=d:\V817\bin\imp.exe
After changing the parameters in the Registry, verify if they are active by going into the Repository Administration Utility, Check Requirements,
Parameter Settings and look for EXECUTE_EXPORT and EXECUTE_IMPORT.
Regards
Sue

My Bridge CC opens in a locked mode - I cannot make any changes (dump cache) - it says "other instances of Adobe Application Manager are running, which must be closed." I have to force quit Bridge to get out of it. I tried to uninstall Bridge and re-insta

My Bridge CC opens in a locked mode - I cannot make any changes (dump cache) - it says "other instances of Adobe Application Manager are running, which must be closed." I have to force quit Bridge to get out of it. I tried to uninstall Bridge and re-install it but it did the same thing. Any ideas where to go next?
The fact that I uninstalled Bridge and reloaded it has me concerned as to what to do next.?

You need to force quit all other (real or fake) instances of the Application Manager. Instructions differ between Mac or Win.
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Cannot export a dump file

Dear all experts,
I need your helps please. We have oracle enterprise 9i2 installed and oracle fail safe installed on the server. We run cluster.
All of a sudden, i ran into a problem to create a dump file for backup.
at the command prompt i type in:
c:\exp
c:\username
c:\password
After entered all the correct usename and password, it quickly responded with error messages as below
EXP-00056: ORACLE error 12560 encountered
ORA-12560: TNS:protocol adapter error
EXP-00000: Export terminated unsuccessfully.
Please note that i use the oracle client 9i2 on client machine.
even i logon to the server where Oracle database server installed, but i got the same error message.
Now we are so worry since we cannot backup database using exportint dump file.
We are now at critical moment. Any helps are greatly appreciated.
Thanks a million.

even i logon to the server where Oracle database server installed, but i got the same error message.
For server side:
Did you set ORACLE_SID environment variable ?
Are you sure Windows service OracleService<instance> is running ?
Are you sure database instance is up and running ?
Can you connect with SQL*Plus to database instance from server ?
For client side:
Did you set ORACLE_SID environment variable ?
Are you sure listener is up and running on server ?
What is the output of tnsping on the client ?
Please note also:
While useful, database exports are not a substitute for whole database backups. They cannot provide the same complete recovery advantages of physical-level backups. For example, you cannot apply archived logs to logical backups in order to update lost changes.

Export dump file and log file name as sysdate in script

Hi to All,
Can anybody help me to give logical backup export dump file namd log file name is as contain sysdate in its name so that we can Uniquelly identified it.
Regards
DXB_DBA

On windows it gets a bit hairy as there really is no clean and nice way of doing it.There are a couple of options.
1. If you can rely on dateformat not changing, you can use a static substring expression. For example, the following might work w/ finnish locale echo %date:~3,2%%date:~6,2%%date:~9,4%Similarly, when you know the dateformat you can tokenize the output of 'date /t' and discard the tokens you don't want.
2. You can set dateformat to your liking and then just use %date% in your script
3. You can run a "SELECT to_char(sysdate,..." into a file and then read that file in your script.
4. Simon Sheppard also has a solution you could use as a basis. I have a slight issue with the approach, but that could just be me.
5. Use gnuwin32 or similar ;)
Also note that %date% env var is set automatically from w2k onwards, so some of the solutions might not work w/ older versions.

Create dump file with datapump, with read right for everybody

Hello,
I have a problem under Linux : I am creating dump files with datapump.
Those dump files are owned by a dba group, with no read access for users not in the dba group.
Is there a way that the datapump utility creates dump files with a read access given to any user ?
Franck

Unlike "exp", when using "expdp", the dumpfile is created by the server process. The server process is forked from the database instance. It inherits the umask settings that are present when the database instance is started.
(Therefore, the only way to change the permissions would be to change the umask for the oracle database server id and restart the database instance --- which is NOT what I would recommend).
umask is set so that all database files created (e.g. with CREATE TABLESPACE or ALTER TABLESPACE ADD DATAFILE) are created with "secure" permissions preventing others from overwriting them -- of course, this is relevant if your database files are on FileSystem.
Hemant K Chitale

Problem in data import from dump file on NAS device

I am using oracle 10g on solaris 10. I have mounted NAS device on my solaris machine.
I have created a directory object dir on my NAS storage in which i have placed the dump file.
Now when i execute the following command to import data
impdp user/pass DIRECTORY=DIR DUMPFILE=MQA.DMP logfile=import.log
then i get the following error message
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 475
ORA-29283: invalid file operation
Can any body help ?

Also, Datapump from NAS device would perform slow.
Take a look at this:
10gR2 "database backup" to nfs mounted dir results in ORA-27054 NFS error
Note:356508.1 - NFS Changes In 10gR2 Slow Performance (RMAN, Export, Datapump) From Metalink.

Issue in getting exception pointer in VC++ CLR project for generating dump file.

Hi,
We are working on VC++ CLR (Windows Forms) application.
We are writing a code to generate Mini dump file (using MINIDUMPWRITEDUMP in dbghelp.dll) whenever application crashes.
The code available on internet for writing mini dump file in c# generates the mini dump but without Exception code and information, because _EXCEPTION_INFORMATION was set using Marshal::GetExceptionPointers() which returns 0. We called MINIDUMPWRITEDUMP
inside AppDomain::UnhandledExceptionEventHandler for this.
To get the valid exception pointer for mini dump we made following attempts with and without AppDomain::UnhandledExceptionEventHandler –
Used mixed (managed and unmanaged ) dll to add SetUnhandledExceptionFilter. Inside top level exception filter function added code to write mini dump. Inside main the handler is set on 1<sup>st</sup> line. But handler is not invoked
on any exception. This works fine with console C# project.
// inside dll
#pragma unmanaged
LONG WINAPI ABCExceptionFilter(__in struct _EXCEPTION_POINTERS *pExceptionInfo)
{ // code to write dump
#pragma managed
Namespacee SEHHandler {
public ref class SEHExpHandler
public:
static void AddHandler()
SetUnhandledExceptionFilter(ABCExceptionFilter);
// inside app main()
[STAThreadAttribute]
int main(array<System::String ^> ^args)
SEHHandler::SEHExpHandler::AddHandler();
//some code . . .
Application::Run(gcnew Form1());
//some code . . .
Used __try __except inside application main. The exception filter was written in other C++ dll and called inside __except ( expression ) using platform Invoke. But this throws the caught exception while trying to call handler.
// inside app class
[DllImport("SEHhandler.dll")]
extern int __stdcall se_handler(unsigned int code, IntPtr ep);
[STAThreadAttribute]
int main(array<System::String ^> ^args)
__try
{ //some code. . .
__except(se_handler(GetExceptionCode(),
(IntPtr)GetExceptionInformation()))
{ //some code. . .
// inside dll
__declspec(dllexport)
extern int WINAPI se_handler(unsigned int code,
struct _EXCEPTION_POINTERS* ep)
{ // code to write minidump
return EXCEPTION_EXECUTE_HANDLER;
Can anyone help us to get either of the code work. The aim is to write dump file with correct stack trace where exception was thrown.
Thanks in advance.
-- Sumit

Hi,
Few days back we tried following sample program and we were able to get exception code and pointer for almost all types of exception catch inside __except statement.
1. Create sample VC++ > CLR > Windows form application.
2. Change Common language Runtime support to (/clr).
3. Set UnhandledExceptionMode to ThrowException in main.
4. Inside application cpp file add __try __except around Application::Run(gcnew Form1()).
5. Add new header file to write unmanaged function to be called inside __except statement to handle exception.
6. Created new Form1 and add few buttons to test different types of exceptions.
7. Exceptions will be catch in __except statement and exception pointers will be available to write mini dump.
Inside application main function use __try, __except block.
#include "stdafx.h"
#include "Form1.h"
[STAThreadAttribute]
int main(array<System::String ^> ^args)
Application::SetUnhandledExceptionMode(UnhandledExceptionMode::ThrowException);
Application::EnableVisualStyles();
Application::SetCompatibleTextRenderingDefault(false);
__try{
// Create the main window and run it
Application::Run(gcnew Form1());
}__except(exception_filter(GetExceptionCode(), GetExceptionInformation())){
// write your code
return 0;
Add header file and write exception filter
#pragma once
#include <windows.h>
#include <stdio.h>
#include <string>
using namespace std;
#pragma comment(lib, "user32.lib")
int exception_filter(unsigned int code, struct _EXCEPTION_POINTERS* ep)
TCHAR buff[100];
wsprintf(buff, L"Inside exception_filter. Excp Pointer %p", (void*)ep);
::MessageBox(NULL,buff,L"Error",MB_OK);
// add code to write mini dump using MINIDUMPWRITEDUMP
return EXCEPTION_EXECUTE_HANDLER;
Thanks.

Size of export dump file

I read an article on EXPORT of dump file cannot over the limit of 2Gig. This is because prior to 8.1.3 there is no large file support for Oracle Import, Export, or SQL*Loader utilties.
How bout the current version? 9i or 10g? Can the exp dump file be larger than 2G?

Under AIX Unix, there is a fsize parameter for every user in /etc/security/limits file. if fsize = -1 then user will have authority to create any file size. But to do this change, you should have root access under Unix enviroment.

Where is my EXPORT dump file ? How to do BRTools off line table reorgan ?

Hello,
Here was my BRTools Export output message :
About to export specified tables via Direct Path ...
Current user changed to SAPPRD
. . exporting table CDHDR 60357362 rows exported
Export terminated successfully without warnings.
BR0280I BRSPACE time stamp: 2011-08-09 16.53.04
BR1160I 1 table exported by EXP utility
BR0280I BRSPACE time stamp: 2011-08-09 16.53.04
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
But where is my Export dump file ?
Besides, could you tell me the procedures of using BRTools Export & Import to do off-line table reorgan ?
Due to some reasons, I can't do online table reorgan.

Hi Ming,
I noted the OSS note 646681 - Reorganizing tables with BRSPACE in my previous message, already. You don't need any additional effort such as creating script, if you use brspace as I noted in my last message.
Stop the SAP system, but not database then execute the command, below;
1) brspace -u / -f tbreorg -t "CDHDR"
2) At the incoming menu steps, select --> (8 - Table reorganization mode (mode)) .. offline
3) Then continue with "c"
At the end of this steps, table and related indexes will be reorganized.
You can update statistics by using the command, below after you complete the steps, above respectfully;
brconnect -u / -c -f stats -t all -f collect -p 4
Best regards,
Orkun Gedik

How can a non dba user manipulate the dump file outside of oracle ?

I have a business request to allow a none DBA database user to dump his tables and he can move his dump file on the Unix box from a file system to another file system. This user has a none oracle unix account. When using traditional exp, this is not a problem. But in expdp, all dump files are owned by oracle. Does anybody know how to change the ownership without a DBA involved?
Unix: Sun Solaris
DB: 10g
Storage: sand disk

Betty wrote:
following option 1, problem is now the command in the shell script like chmod 744 doesn't allow this none dba user to change the permission, since he doesn't own the file. you can test yourself:
changepermit.ksh 755
chmod 744 dump.dmpSo have the script owned by oracle:dba change the owner!
$ echo "" > bla
$ ll bla
-rw-rw-rw-   1 jeg    users            1 Nov 10 16:53 bla
$ chmod 640 bla
$ ll bla
-rw-r-----   1 jeg    users            1 Nov 10 16:53 bla
$ chown smk bla
$ ll bla
-rw-r-----   1 smk    users            1 Nov 10 16:53 bla
$ echo "" > bla
/usr/bin/ksh: bla: cannot createNote you'll have to move it unless you let oracle write to it.

Export dump file using Scheduler

hellow everyone.
this is Mehwish i am looking for help,I created a script for exporting the dump files but i got a problem
when export starts so cause of the existing name its not exporting the file i want,Is there anyway
to change the export name everyday?
Mehwish

check this
Adding timestamp to exp filename
http://www.idevelopment.info/data/Oracle/DBA_scripts/WINDOWS_Shell_Scripts/dpump_backup_online_full.bat
-Anantha

DUMP FILES UNABLE TO DELETE IN LINUX

Hi
Our company currently runs the databases on RAC (Oracle 11gR2). We generally take the backup of SCHEMAS everyday using the datapump. My issues here is I am unable to delete the dump files older that 3 days using the below script
00 14 * * * find /nbds2/orabkp/*.dmp.gz -mtime +3 -exec rm -f {} \;
but I am able to delete the files using the below command
rm -f abcb.dmp.gz . I verified the file permissions etc on the dump file that is generated everything looks fine.
Even I tried using the below script
#################cut here - rmdumpfiles #############
#!/bin/bash
echo "starting at `date`"
for i in `find /nbds2/orabkp -mtime +3 -name "*.dmp.gz" `
do
echo "deleting $i "
rm -f $i
done
echo "done at `date` "
chmod 750 rmdumpfiles
Crontab entry:
00 14 * * * /home/oracle/rmdumpfiles >> /home/oracle/rmdump.log
But the files didn't get deleted and below is the information I got from the log file
"starting at Mon Feb 18 17:59:01 PST 2013
done at Mon Feb 18 17:59:01 PST 2013"
Can someone help me please
Thank you
Karren

Hi Dude,
Thank you very much for your quick response. Actually I had to delete a lot of files manually due to storage issue( I am left with only the dump files from of 17,18,19). But my results are weird. I am not able to find the issue. Can you help me
stat /nbds2/orabkp/FULL_EXP_FSDEV_expdp_Feb_17_2013.dmp.gz
File: `/nbds2/orabkp/FULL_EXP_FSDEV_expdp_Feb_17_2013.dmp.gz'
Size: 7013910756 Blocks: 13753000 IO Block: 65536 regular file
Device: 16h/22d Inode: 21604 Links: 1
Access: (0640/-rw-r-----) Uid: ( 1001/ oracle) Gid: ( 1001/oinstall)
Access: 2013-02-17 18:00:04.000000000 -0800
Modify: 2013-02-17 18:21:11.000000000 -0800
Change: 2013-02-17 18:26:41.988556000 -0800
find /nbds2/orabkp/* -iname "*.dmp.gz" -mtime +3
Ans: None
find /nbds2/orabkp/* -iname "*.dmp.gz" -mtime +2
Ans: None
find /nbds2/orabkp/* -iname "*.dmp.gz" -mtime +1
Ans: /nbds2/orabkp/FULL_EXP_FSDEV_expdp_Feb_17_2013.dmp.gz
ls -l /nbds2/orabkp/FULL_EXP_FSDEV_*
-rw-r----- 1 oracle oinstall 7013910756 Feb 17 18:21 /nbds2/orabkp/FULL_EXP_FSDEV_expdp_Feb_17_2013.dmp.gz
-rw-r--r-- 1 oracle asmadmin 75805 Feb 17 18:21 /nbds2/orabkp/FULL_EXP_FSDEV_expdp_Feb_17_2013.log
-rw-r--r-- 1 oracle asmadmin 75805 Feb 18 18:21 /nbds2/orabkp/FULL_EXP_FSDEV_expdp_Feb_18_2013.log
-rw-r----- 1 oracle oinstall 7014081297 Feb 19 18:20 /nbds2/orabkp/FULL_EXP_FSDEV_expdp_Feb_19_2013.dmp.gz
-rw-r--r-- 1 oracle asmadmin 75805 Feb 19 18:20 /nbds2/orabkp/FULL_EXP_FSDEV_expdp_Feb_19_2013.log
date
Ans: Wed Feb 20 09:27:02 PST 2013
Now I am able to delete the files thank you very much for your help.This is the first time I am having this issue I am not sure the reason behind it "date" and "mtime" are conflicting and that is causing the issue. Can you please enlighten me regarding this
Edited by: 988802 on Feb 20, 2013 9:42 AM
Edited by: 988802 on Feb 20, 2013 10:04 AM

Changing Dump File

Similar Messages

Maybe you are looking for