Changing effect of PO after Release of PO

Hi,
In our present scenario.First we create the PO and if we go for ME9F or For GR without Releaisng of PO it is giving error message PO is not yet release which is OK, but if we release the PO, and after that if we change the PO it is not asking again for PO release my requirement is that after changing in PO system should not allow to ME9F or MIGO it should again ask for PO release, and also how to see the changes made for a particular PO.
regards,
zafar

hi,
by means of release indicator we can reinitiate the release after any changes, so, system will not allow to excute the transaction ME9F and MIGO
if you want to see the chages, we can see thru two ways
1. in PO screen after saving the changes you can see in the environment mennu- header changes or item changes
2. by activating version management we can see the changes in the PO screen itself as a seperate tab called version
hope this information will help you
Regards
Sridharan

Similar Messages

  • Changes in PR even after release

    Dear Gurus
    In purchase Requisition change (ME52N) it is allowing to change PR Quantity and Price even after released from the higher authorities.
    What Configuration has to be done so that After release of PO system should not allow to do any changes in Purchase requisition.
    Where as the purchase requisiotn changes has to be done only after the higher authority asks to make changes i.e the higher authorities has sent for revision.
    Also plz let me know how can the higher authority set the purchase req for Changes in SAP (Any configuration has to be done for that).
    Or any customizing settings required.
    If the Changes is done in PR then again release strategy should be applicable.
    Please guide me.
    Regards
    shailesh

    Hi SHailesh,
    In your release procedure for PR's. For the release indicator, in the field changebill enter
    Options:
    1 - Cannot be changed (no changes possible)
    4 - Changeable, but new release in case of value change or strategy change
    The above will resolve your issue.
    if helpful award points
    Regards,
    Vivek

  • How to block changes in purchase order after purchase release

    Dear all
    Can u please tell us how to block any changes in purchase order after purchase order is released...
    (We don't want any line items addition or quantity addition or any changes once purchase order is released..)We wanted this for a particular purchase order type only
    Regards
    Sudha

    Dear Sudha
    Yes it is possible to confiquire your system insuch a way where once if the PO  gets final relase then it cannot be changed.Only possiblity that will be available for the user to make chanegs in PO is possible when the final release is to be reset and then make the changes.
    Release Indicator: specicfies whether the PO documents is blocked or can be processed for the follow functions.
    You can define the release indicators you need for your release procedure:
    •The Released indicator is used to specify whether messages (PO documents in output format) may be transmitted for a purchase order with this indicator.
    •The Changeability indicator shows the effect of changes to the PO (a change to a PO may require a new release strategy to be determined, for instance).
    •By means of the Value change indicator, you can specify that the release strategy is to be re-started if a PO is changed and the value of a PO item thereby increases by a certain percentage (e.g. 10%). Set the Changeability indicator to "4 - Changeable, new release in case of new strategy or value change" or "6 - Changeable, new release in case of new strategy or value change/outputted" and enter a percentage in the Value change field.
    And after that you can specify release statuese where you can specify which release indicator/status a PO is to have after having been released via a certain release code.
    and after release simulation .
    Test for the PO change after final release System will not allow you tomake changes by giving the message that the release  indicator doesnot allow you make the changes in PO.
    Regards
    Sunny

  • Change the  description of the change request number" in SE10 after release

    Hi All
    Is there way to change the
    "description of the change request number" in SE10
    after releasing the change request number?
    appreciate your feedback
    Thanks you
    Iver

    Hello
    I do not know a way to do it in se10 but a simple program could do the trick.
    Include the following code in your program.
    update e07t set as4text = 'your new description'
          where trkorr = your_cr and langu = 'E'.
    Of course you will have to wrestle with the 'moral issue' of directly updating SAP delivered tables
    Regards
    Greg Kern.

  • Need to Change PR after Release

    Hi,
    We have a PR which is created and Released. It is configured in such a way that after release, changes are not allowed. Now, the user wants to change the Purchase Group field (only that field) in the PR without re-triggering the release strategy. I checked the Release Indicator in the Release Strategy and changed the field 'Changeable' to the value 2.
    Now, it allows to change the Purchase Group. But, user also be able to add new line items to PR, which we don't want to allow.That means, user should only be able to change the Purchase Group field of the existing line items. No other changes should be allowed.
    How we can solve this issue.. Please give me your suggestions.
    Thanks in advance.

    Hi Arminda,
    Thanks for your reply.
    I tried that. As you said, it will make all fields as 'Display' and only 'Purchasing Group' as editable.
    But, the problem is, it will allow the user to add a new line item to the PR without affecting the Release Status.
    I don't want to allow the user to add another line item.
    Is there any control in the field 'Changeable' where we give the values 1 to 4 ? Please let me know.

  • Internal change after Release

    Hi
    Scenario
    We are using internal order (Investment) for capital budgeting.
    We have created two roles a)Z_FI_IOCREATION for order creation, change
    and display and b)Z_FI_IORELEASE exclusively for releasing the order.
    End users create the order and their HOD's release the oders.
    Requirement
    End users can change the order n number of times but only before
    Release of the order.
    After release of Order if the order is changed by end user the orders
    should be available for Release again. This way we contol the change of
    orders after approval. How this can be addressed.
    Regards
    Ganesh

    Hi,
    Try whether you do not give authroization for change of Internal Order through transaction code KO02.
    Trust this helps much!
    Cheers!

  • Changing Purchase Reqs after release.

    After releasing a Preq (Cost Centre), if we attempt to change it in ME52N everything on the line's display only. So I can't increase the qty for example and send for re-approval (trigger the release strategy). This is normal?
    The Changeability indicator in OMGQ for the release indicator (F - released) was blank. I changed this to 4 but neither allow us to change the Preq after realease. Could you maybe advise please? Is it possible to change the req after release, seems odd I can't?

    Hello,
      in customizing for release indicator, you must check also field "Field selection key" which is defined under "Material management --> Purchasing --> Purchase requisition --> Define screen layout at document level". You should check the "Field selection key" assigned to your release indicator: that key defines the mandatory, optional and view-only fields in Purchase documents, and can be linked to a release status.
    Hope to be useful.
    Best regards,
    Andrea

  • PR quantity change after Release

    Hi Friends,    
                                       I am unable to change PR Quantity after release of PR. Please suggest..
    Regards,

    hi,
    When you set up the release strategy there is an indicator for the changability, which states that whether you wanna make the further changes in the PR doc, once it is released...
    So, if you wanna allow the changability for the PR docs, then you can use the any of the indicator among 4, 5 , 6 as per your req....
    by this you shd be able to make changes...
    Regards
    Priyanka.P

  • Po header change after release

    Dear All
    We require list of PO for last one month PO header or tiem level text has been changed after release
    Regards
    Dishant

    Hi,
    You can use the following report to get you all the changes in PO. Ask your ABAP person to run it for you.
    http://www.sap-img.com/mm001.htm
    It is an ABAP program contributed by one of the SAP members, which reports all the changes made in PO and list out the details per document.
    Hope it helps,
    Best regards
    Amit Bakshi

  • Purchase order changes after release

    Hi,
    How can I block a purchase order to any changes after release it and then, in case of need, mark for deletion the purchase order itens?
    Regards,
    Maria

    Hi,
    To block any changes in the purchase order to after release, set Changeability  indicator as 1 for  Release ID "R" in following path & save.:
    SPRO ->MM - Purchasing -> PO -> Rlease Procedure for PO -> Define Release for PO -> Release Indicator
    NOTE:If you set  Changeability  indicator as 3, PO can be changed after release and trigger a  new release strategy based on value changes.
    Regards,
    Biju K

  • Not allowing users to change qty in PM order after release

    Hi
    I am using the user exit  IW010009(customer check for save event - ZXWOCU07 to control the permit functionality against the plan cost in the PM order, which is functioning well. But I have a requirement to check , the below scenario.
    In IW31, the user creates the order with component “A” and qty 10 having value more than the permit value (say Rs.5000/,) and if he tries to release the order, the system does not allow the user to release the order. The user goes and changes the qty of the component “A” to 3 and the value is less than Rs 5000. The user successfully releases the order, but doesn’t save. He then goes to the component tab and changes the qty to 10 and save the order.
    I need some help to control the user action, of changing the qty, after release. Is there any table/function where I can find the order no and the qty entered after release of the PM order and  before saving.
    I have done some coding for WBS entry (customization) and the permit in the user exit IW010009.
    Regards
    Vidhyadharan

    Hi Jogeswara Rao
    I have pasted below the requirement from my original thread
    "I need some help to control the user action, of changing the qty, after release. Is there any table/function where I can find the order no and the qty entered after release of the PM order and  before saving."
    Regards
    Vidhyadharan

  • Changing Ramp color in After Effects

    Hi all,
      I'm still new to AE and currently using step by step guides from books to practice in AE. In one of my practice, I'm creating a text animation with a ramps shader as the background as seen in my attached file here, and according to the book, no matter initial your color choice from your color picker, the ramp color will eventually default to gradations of black and white as seen in my file here. I wonder if there's any way that I can have more control of my color here, so I'll choose the color of my ramp.
    Thanks.

    Ok. Thanks for the uploading tip. I've enclosed the image as an attachment here for more clarification. hope it helps
    Ugoharris.
    Date: Sun, 22 Nov 2009 23:02:50 -0700
    From: [email protected]
    To: [email protected]
    Subject: Changing Ramp color in After Effects
    When attaching images, use the camera icon or the pix will get caught up in the virus queue. As I'm writing this, it's not yet visible. Anyway, I'm not really sure what you are describing, since you didn't mention what book and chapter and even then it's probably a newer revision which I don't have. There's a million ways to create gradients in AE, so probably you are simply missing something obvious.
    - Ramp effect
    - Ramp effect, followed by Colorama
    - Layer Styles - Gradient Overlay
    - Shape Layers with gradient fills
    For some specific cases, the effect may require to be applied to a solid, where the other layer, e.g. a text layer acts as the matte. also make sure to adjust the start and end points of the gradients to fall within the dimensions of the layer to be affected.
    Mylenium
    >

  • How can I load external file .txt in After Effects CC 2014.0 Release / Mavericks OS X 10.9.4 (13E28)?

    ello everybody.
    Someone can help me to load a external file .txt in After Effects CC 2014.0 Release / Mavericks OS X 10.9.4 (13E28)?
    I tried the code bellow, but doesn't work.
    try{
    myPath = "~/Desktop/source.txt";
    $.evalFile(myPath);
    eval(thisComp.name)[0];
    }catch(err){
    "MISSING";
    The source.txt file have the texts bellow:
    var comp1 = ["Title”, “Subtitle”, “Description”];
    var comp2 = ["Text 0", "Text 1", "Text 2"];
    var comp3 = ["Text 0", "Text 1", "Text 2"];
    Thanks.

    This is the text file (with the modified first line) that I used:
    var comp1 = ["Title", "Subtitle", "Description"];
    var comp2 = ["Text 0", "Text 1", "Text 2"];
    var comp3 = ["Text 0", "Text 1", "Text 2"];
    Dan
    BTW - I did test it on AE CC 2014

  • I need to create buttons in which the color changes, and stays on after you release the button

    I need to create buttons in which the color changes, and stays on after you release the button. The hard part is the buttons must change independently of each other.
    To get an idea of some of things I’ve tried I’ve tried making the movie with two frames.
    When I click the button it switched to the new frame which would show a movie clip,
    Unfortunately all buttons would change color together and don’t see how to make it so that they change independently.

    you must use movieclip buttons and code for their frame changes.

  • Do not allow change of Reference Object after Order release

    Dear All,
    The requirement is that we should lock(not able to change) the Reference Object after the Maintenance Order is released. Can we acheive this in standard way or do we need to go for development.
    If going for development what should be the basic logic.
    Regards,
    MLN Prasad

    Prasad,
      You are accomplishing the same utilizing the built in enhancement framework([Implicit enhancements|http://help.sap.com/saphelp_nw70/helpdata/en/70/63da4023a28631e10000000a1550b0/frameset.htm]), WITHOUT making a MODIFICATION to the system. This technology / functionality is available from ECC 6.0 . You would need to be very careful in using the implicit enhancement functionality so that you don't break the flow. Your requirement seems to be a simple one which could be accomplished by tweaking the screen attributes of the field under certain conditions, for this specific screen in the program. You may also have to make the Priority field a display only, so that it doesn't trigger a change through it via the user exit or through standard.
    Regards
    Narasimhan

Maybe you are looking for