Changing field staus group for multiple accounts

Hi,
Is it possible to change the FSG for multiple accounts at the same time, or does it have to be done one by one through FS00?
Thanks and Regards

Hi Sam,
Try this t-code :
OB_GLACC12
Hope it is useful.

Similar Messages

Change Field selection group for Movt type 701

Hi experts,
I want to change Field Selection group for movt type 701. Right now " Business Area " & " Cost Centre " fields are suppressed. I want to change it to required entry.
Please guide me over this
Regards,
Rajneesh Gulati

the note explaines it:
In Customizing an account assignment can be made for every inventory
adjustment account. To do this the inventory adjustment account must
first be defined as a cost element (Transaction KA01 / KA06):
Accounting -> Controlling -> Cost centers -> Master data -> Cost element
-> Create primary / secondary. Then an account assignment can be made
for the cost element (Transaction OKB9):
Tools -> Customizing -> Setup menu -> Accounting -> Controlling -> Cost
centers -> Actual postings -> Automatic account assignment.
If this account assignment is implemented every posting to the
particular inventory adjustment account will automatically receive the
appropriate account assignment.

Difference between field staus group for posting key and GL account

Hi all,
can anyone tell me what is the difference of usage for field status group in posting key and GL account as i notice the fileds are the same. during data entry, system will check both field status or how?
thanks.

Hi
Both are to control the field status of the line item.
But, the FSG of the Posting Key and the GL FSG status should not clash like below.
Take 'Assignment' field as example :
Posting key FS - Suppress & GL FS - Required - will give you error message at the time of posting
Posting key FS - Required & GL FS - Suppress - will give you error message at the time of posting
Otherthan the above, all other combination works
VVR

GR and GR Non Val indicator in R/3 PO for multiple account assigned SC's

Hi,
We are on SRM 3.0(EBP 4.0) and R/3 4.7.
We have implemented the BBP_CREATE_PO_BACK badi for setting or clearing the GR and IR indicators under certian conditions.
But for Multiple account assigned SC's we get an error message "06181 With non-valuated GR, please also enter GR i ndicator ".
We have tried implementing note# 872000, but this has not solved the issue.
The PO's get created only if we force the GR indicator when transferring the data into R/3.
It seems clear that while creating the PO the system is encountering the GR Non Val indicator but not the GR indicator, so its throwing the error message (we get the same error message when we create the PO from R/3 with GRnon val indicator checked and GR ind unchecked).
The proposed solution is that in the same BADI, along with clearing the GR indicator, we will also clear the GR non val indicator.
This can solve the issue if the indicators are transferred as it is from EBP.
But can anyone tell me if these indicators are also checked/changed in any FM/program in R/3 before the PO is created?
Is there any customizing setting which is affecting this particular behaviour?
Regards,
Srivatsan

Hi Srivatsan ?
In ECC, you have a configuration point :
Materials Management->Account Assignment->Maintain Account Assignment Categories
Here you can untick the indicator you want by account assignment category;
Kind regards,
Yann

I need to back up my imac running Tiger (no time machine) so that we can upgrade OS. It is set up for multiple accounts. How do I capture all files in each account using newly purchased USB external hard drive?

I need to back up my imac running Tiger (no time machine) so that we can upgrade OS. It is set up for multiple accounts. How do I capture all files in each account using newly purchased USB external hard drive? Thanks!

Backup Software Recommendations
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Or you can simply use the Restore option of Disk Utility to clone the drive to the backup:
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

Field Status Group for Special G/L Indicators

Could you define different field status group for special G/L indicators? My problem is I am using two different special G/L indicators but their recon accounts are assigned with the same field status group. I used the same posting keys as well. But when it comes to general posting, they have different screen numbers. One SAPMF05A 303 and the other one is SAPMF05A 304. How did this happen?

Hi Noel,
As you have defined Field Status Group for 2 different SPL GL Indicators then it will create 2 different screens only as it wont consider the reconciliation account.
Regards
andrew

Copy function for multiple account assingment (cost distribution)

Hello,
We are using multiple account assignment to enter different asset no for each quantity in same line item. Other fields like G/L account remains same.. Is it possinble to copy the value from one asset to all the assets in same line item. The function of copy in clip and inset from clipboard works only for different items not for multiple account assignments...
In R/3 there is function to copy and paste in case of multiple account assignment but could not find the same in SRM.
Any solution????
We are in SRM 4.0...
Amit

Hello,
During PO replication from SRM to R/3, customizing from OME9 is not read and "Partial invoice indicator" is always defaulted to "1" when item has a multiple account assignment.
This behaviour can be overwritten by implementing:
- either BBP_PO_INBOUND_BADI for method BBP_MAP_BEFORE_BAPI,
- or BBP_ECS_PO_OUT_BADI for method BBP_B46B_PO_OUTBOUND.
So, no need to take care of OME9 customizing.
Regards.
Laurent.

GR/IR Rounding Logic for Multiple Account Assignment

We have activated business function LOG_MM_MAA_1 (EHP4 release 604), GR valuated. When choosing Distribution on quantity basis and distribute partial inv proportionally, the MIGO postings are different from the MIRO postings. For example, we have a quantity of 12 that we allocate to two different cost centers 33.3 / 66.7 %. We receive a partial qty of 5. MIGO distributes the quantity 1.665 / 3.335, respectively. However, MIRO distributes the quantity 1.666 / 3.333 respectively. Since MIRO is supposed to accept the MIGO quantities and amounts, why is the percentage allocation different? Is there a way to make the percentages equal for MIGO / MIRO? Modification of the percentage field (VPROZ) in the PO to more than 1 decimal is not an option.
Example
    PO (quantity-based distribution, partial inv is proportional: Receive partial Qty 5 of total 12
                         Net Value            Qty              Percen           MIGO           MIRO
    Item:            9,600.00 USD    12.000 pc     100.00       4,340.00      4,340.00
    Account 1: 3,200.00 USD      4.000 pc        33.3         1,446.67      1,446.96
    Account 2: 6,400.00 USD      8.000 pc        66.7         2,893.33      2,893.04
The small difference of $0.29 for this example is inconsequential, but for larger quantieis it will have a greater impact on the account allocation.

U set or U dont set system will flag the GR non valuated once u assign multiple account assignment.
But SAP is coming up with GR valuated for Multiple account assignment in enhancement package 4.
Check out EP4 Presentation at........
https://websmp210.sap-ag.de/erp-ehp
Venkat

E-mail group for multiple contacts

I want to creat an e-mail group for multiple contacts so I only need to select the group and then send an e-mail to all the contacts in that group. How do i creat a distribution group in icloud from my Outlook Address book?

Hi,
Yes, when logon to ePrint Center, at the top frame, left hand side, there is a place you can +Add Printer. Click to this and follow the instructions.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can't change the 'compilation status' for multiple items in iTunes 8.

Hi there,
I've got an issue regarding the disappearance of the compilation 'tick box' when changing multiple items. Its there when you click on 'get info' for the individual track but its no longer there (in iTunes 8) when I want to change the compilation 'status' for multiple tracks at a time.
In iTunes 7 I selected all the tracks and changed their compilation status by accident, but now, in iTunes 8 I can't change this without going through my library, track by track!.
Please help.
Thanks,
Fred

Multiple Get info now has tabs - look on the options tab.

Changing the display profile for multiple users at once.

Is it possible to change the display profile for multiple users at once? We would like ot be able ot add tabs and channels globally, but right now we can anly do it for once user at a time. Also, is it possible to have certain generic display profiles that all users use? like an admin profile and a tech support profile and a normal suer profile? Any help is appreciated...

Yes this possible using the dpadmin batch command.
Please check the dpadmin documentation for the batch command.
For generic display profile what you can do is create users and assign the user particular roles. The display you would be creating would be for the roles. The users belonging to that role would inherit that display profile.
HTH ..

I want to change the security questions for my account , For I have forgotten

I want to change the security questions for my account , For I have forgotten

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security, choose country, then click
Continue;
6. Under ‘more options’ choose/click/tap the email icon. Fill out the form with your contact information. Describe your issue in the text box. ‘Cannot remember answers to security questions, need to have them reset’.
You should get a response within 24-48 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service

Field Status Group For MIRO

Dear Friends
Pls say me where we can get the field status group for Miro header level where i got a problem to make the business area manditory.
Regards
Vinay Bhaskar

Hi vinay
for busienss place we can make the field mandatory thorugh validations it is not possible through FSG
Plz reward the point if it is useflull
Regards

Is there a discount for multiple accounts?

Hi
My wife and I have seperate Icloud accounts. Is there a discount for multiple accounts upgrading to the additional storage?

I'm afraid not; and additional storage is per separate account and cannot be shared.

Change transaction type group for transaction type

Hi
Is it possible to change the transaction type group for a TTY.For ex i want to change for 270 and 151 -TTY GRP -32 and 33 respectively.As of now it is TTY grp is 25 and 10.I need to change this so that in Asset history sheet when i do ABT1N i want these values to be in field transfer and not in acquisition and retirement in respective company codes.
Where is TTY grp are set for TTY.Can it be modified.Please suggest.

For creating transaction type see the wiki.
In the transaction types you assign them!
For 151
SPRO:
Financial Accounting / Asset Accounting / Transactions / Acquisitions / Define Transaction Types for Acquisitions.
Assign there the asst hist group you need for this transaction type
For 270
SPRO:
Financial Accounting / Asset Accounting / Transactions / Retirements / Define Transaction Types for Retirements
Assign there the asst hist group you need for this transaction type

Changing field staus group for multiple accounts

Similar Messages

Maybe you are looking for