Changing filter cut off on M series cards

I want to sample 32 channels with the M series 628x series cards. But at the maximum sampling rate that would afford me a 15Khz sampling per channel. To avoid aliasing I need an analog filter at 5 KHz. The M series card only offers a 40 Khz filter. Is there anyway to change this filter's cutoff (-3db) to 5 Khz? Any suggestion is greatly appreciated, but I'd like to avoid building a 32 separate analog filters in front each channel.

Hi,
I'm really worry about this issue.
Our customer has a PCI 6289 and he bought it becuase on the catalogue it said: "Programmable lowpass filter"
http://sine.ni.com/nips/cds/view/p/lang/en/nid/14115
He wants to use the antialiasing filter option with a cutoff frequency of 1KHz.
The answer you wrote means that he cannot use any cutoff frequency, just 40kHz.
So , why it is written "Programmable lowpass filter"?
what is or are the ranges of the "Programmable lowpass filter"?
Why isnt documented on the M series specification?
Thanks
Dalia
Dalia Russek
Application Engineer Manager
National Instruments ISRAEL Ltd

Similar Messages

Changed asset cut off value

Hi experts
In my compnay all assets have 5 % scrap value (cut off value). that means asset must have ramain 5% of basic value at the end of useful life. but now cilent want 100 % depreciable asset.(want to remove that 5% value). Is it possible for old asset which already capitalized and depreciated since past so many years.
If yes then what will be the Financial effect.
Regards
Nisha

Hi Nisha
You can only make changes in the open fiscal year in Asset accounting.
You will have to change the depreciation key for 5% cut off value to nil.
The effect of these would eb as follows.
System would determine depreciation for all assets based on changed depreciation key.
Example is as follows
Asset A, Net book value of 1000 USD on 01/01/2008. (Fiscal year 01/01/2008 - 31/12/2008)
Each month Asset is depreciated for 100 usd. so for period 1-9 system will post depreciation 900 usd.
In period 10 system will post depreciation of 50, since cut of value is at 950.
Lets Assume that depreciation run for period 11 is done where this asset is not taken for depreciation posting since cut of value has reached.
Now in period 12, you change depreciation key for cut of value to be 0% then system will recalcluate depreciation for tht year
IN our case total depreciation to be posted for this year is 1000 usd where as only 950 usd has been posted till date.
So additional 50 USD will be calculated as outstanding depreciation in period 12.
In FI it will hit your P&L and in B/S your Accum dep Account.
Hope this helps.
Thanks
Sanjeev

Quickly assign M-AUDIO oxygen nobs 1-8 filter cut off automation

hi, how do i link M-AUDIO oxygen nobs to plugin. For example I would like to use (1) and manual move the "cutoff" effect in the es1?
is this done through touch mode?

well I'm happy to grab your hand for this one - as i love Logic's ability to do this so quickly!
OK.... first click on / adjust your evoc20 formant shift to activate it as the "last tweeked knob".
Now, go to Logic Pro>Preferences>Control surfaces and select the first item in the menu which should read "Learn Assignment for "Formant Shift"".
A small floating window pops up: 'controller assignments'.
move the oxygen 8 knob you want to assign the formant shift knob to...and move the formant shift knob around too.
Click on the "learn mode" button to deactivate it.
Now, simply twiddle the oxygen 8 knob and hey presto you will see the evoc20's formant shift move in tandem. cool.
You can now assign other controls as desired.
This is one of my favourite features of Logic 7.
Hope that helps
Rounik

Midi controlled filters, aka use mod wheel to change cut off frequency

Does garageband have any filters that you can control in real time via midi? Such as dynamically changing the cut off frequency of a low pass filter.
I'd love to do a classic filter sweep using the mod wheel.
Are there any midi controlled AU plugins that can do this?

Any automation in GB is done via the automation curves.

I just bought the new HDMI cord for the IPad, it works good but a small potion of the TOP and the BOTTOM is cut off. It doesn't seem to do it for movies. My monitor is a 23 IN' acer s series.

I just bought the new HDMI cord for the IPad, it works good but a small potion of the TOP and the BOTTOM is cut off. It doesn't seem to do it for movies(although I can't really tell. My monitor is a 23 IN' acer s series. I just installed the drivers for my monitor with no change. I think I have a CD somewhere for my monitor maybe it has some kind of program in there that can help me. I can post a picture if I need to. Thanks

No work around that I know of.
Apple Feedback http://www.apple.com/feedback/

Every time my lg g pad 8.3 lte tablet is turned off it reverts the saving email attachment back to internal storage. Every time I turn on, I change it back to save to SD card. It stays that way until it is turned off for more than a minute. If I do a r

Every time my lg g pad 8.3 lte tablet is turned off it reverts the saving email attachment back to internal storage. Every time I turn on, I change it back to save to SD card. It stays that way until it is turned off for more than a minute. If I do a restart, it holds the setting, but loses it when it is shut down for any period of time. Does anyone else have this issue? The setting holds for photos taken with camera storing to SD card. Only the email attachment setting does not hold.

I believe that system has a hall sensor on it to detect when the lid is closed so it can put the system to sleep and/or disable the monitor so it can be used with an external monitor only. If the sensor is marginal or has a bad cable, it may intermittently cut the monitor on and off, and may likewise put the system to sleep. One way to check would be to plug in an external monitor and if the laptop's screen cuts off or doesn't show up, start using the trackpad and press on a non-typing key like the shift key. If the external display suddenly pops and becomes active while the laptop display remains black, it's probably a problem with the sensor or the cable/connection. You might be able to fool the sensor into kicking on and off by moving a magnet over it. It's located on the left had side of the base with the unit opened up, and right over the audio output plug.
I know of some people that put a small magnet right over the hall sensor's location so the laptop display turns off and they use the system with an external monitor, keyboard, and mouse. If fooling with magnets, make sure they're small and don't get them close to the hard drive because a strong magnet can wipe them out.
I don't know if this will help you much, but it might.

I am running on OSx 10.6.8 using a HP officejet 6000 printer. On a 8.5x11 paper, I cannot print closer than 5/8" at bottom. Images or type cuts off at that point. HP says it's an mac problem. I tried changing evry possible print setting. Am I missing somt

Running on OSx 10.6.8 using a new HP Officejet 6000 printer. How can I get to within 1/8" on all sides of an 8.5x11 sheet of paper. Images and copy cuts off at 5/8" at bottom. HP says it's a mac problem, not an HP problem. I tried every combination of print settings. Nothing has solved the problem. Have I missed something?

Yes you are unfortunately you as the consumer are caught in the middle. I totally disagree with what HP told you, they supply the print drivers to Apple, Apple doesn't write printer drivers that I know of. Look in the print settings to see if you can go below 5/8", I know I can with my HP printers (Laserjet 1012, Color Laserjet 2600N, OfficeJet 7410 & OfficeJet 7700 series) so I'm sure the issue is specific to the OJ6000 series.

How to generate an interrupt using DI change detection on m-series card

Hi,
I want to generate an interrupt on the positive edge of a digital input signal on the IO connector.
Does anybody know how to configure an m-series card (PXI-6224) for this use through RLP programming?
Thanks in advance,
Richard

Richard vl wrote:
I want to generate an interrupt on the positive edge of a digital input signal on the IO connector.
Does anybody know how to configure an m-series card (PXI-6224) for this use through RLP programming?
RuthC wrote:
I also want to generate an external interrupt on an M- series pci-6229, and on a pci-6602.
1. Is there an exampe how to configure the registers?
2. which external signals can genarate interrupts on those cards?
Hi Richard, hi Ruth,
Let me address your questions together: first for 662x (part of M Series) digital change detection and then for 6602 (part of 660x).
622x (M Series)
Digital change detection has not been released in the DDK for M Series devices. If you must use an M Series device, please ask your field engineer to contact NI support so we can discuss options. On the other hand, digital change detection has been released in the DDK for X Series devices (63xx) [1].
If you can use one from that family, then your programming will be much easier -- the RLP manual discusses change detection as well as interrupts (Chapter 1: Interrupts, beginning on PDF page 48), and the example distribution demonstrates how to configure change detection on the device (dioex3). The last piece is data transfer: the example's data transfer mechanism is DMA, so you would need to supply your own interrupt handler to move data to the host (or alert the host that a DMA transfer has completed).
6602 (660x family)
Moving to the 6602, change detection is not possible. The 660x device family only supports polling for transfering data read on the digital lines [2].
Please let me know if I overlooked anything in your questions.
[1] NI Measurement Hardware Driver Development Kit
http://sine.ni.com/nips/cds/view/p/lang/en/nid/11737
[2] NI 660x Specifications
http://digital.ni.com/manuals.nsf/websearch/57893F11B0C0687F862579330064FF6F
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

My Deskjet 1000 J110 series is cutting off bottom parts of sentences?

My Deskjet 1000 J110 series is cutting off bottom parts of sentences. I have not had this problem in the past. It only does it to a few sentences & my headers.
What could be causing this and what can I do about it?

Hi IlianaGrace96,
There are several things that can cause your problem. I would start by reviewing the following HP Consumer Support document:
Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems
1. Perform a hard reset on the printer. Unplug the power cord from the back. Leave it out for 30 seconds and then plug it back in.
2. Use the automated tool to align the cartridges.
3. Use the automated tool to clean the cartridges.
4. Manually clean the cartridges with a lint free cloth and water.
5. Try soaking your printheads in semi warm water for about 5 minutes.
I hope this helps.
Regards,
BethenyF
Click the Thumbs up to say thanks. Mark Accepted Solution if the solution solves your issue.

Sounds cut off upon patch change

I have a 2009 MBP 2.4ghz dual core, 4GB RAM. Using 2 controllers plugged in via USB. 1/8" audio line from computer to PA.
I just upgraded to Maountain Lion and MS3. I also am using sounds from Omnisphere 1.5.
I have created a Concert. Within this concert I have a set for each song.
The most channel strips that I have for a patch is 3, with one sound assigned to one controller and 2 layered onto another.
These sounds are chosen from either the MS3 sound list (some from the legacy list) or from Omnisphere. The most sounds I have layered in Omnisphere is 2. I am not using any sequencing or arpeggiators.
I have programmed a DP2 pedal to change from one patch to the next.
Now to the troubles.
When I change patches, the sound from the previous patch gets cut off. This does not happen with all of the patches though. It seems to happen randomly. Or at least it appears that way. Not sure if there are certain sounds that are buggy this way.
The other problem I have is when I change patches, sometimes I am getting a delay before the sounds become available. Sometimes when the sounds become available they will break up when I play them.
When I only use the Omnisphere plug-in as my interface and only use Omnisphere sounds I do not get this problem.
I don't think that I am really doing much with the amount of sounds and layering that is possible.
Could it be that my computer is not up to snuff to run the software? Is it the connectivity?
I have a gig in a couple weeks and would like to figure this out as soon as possible. Any suggestions would be greatly appreciated.

Have you tried disabling Omnisphere, just for a test, to see if the problem is occurring with just the built-in plug-ins? Another thing to try, if you haven't already done so go ahead and display the CPU meter.. you to this in the app's Display preference pane. Then double click on the CPU side of the meter in the toolbar. This will open a CPU monitoring window... and you can instantly see how much CPU each plug-in is using... assuming it's a CPU overload that's causing it.
Not sure if this is how you are using it, but if for instance you play something with Patch A and when you switch to Patch B you're either holding sustain or you want the sound to crossover into Patch B so it tails nicely... at this point you have both Patch A and Patch B active at the same time. If both those patches have 2 Omnispheres you actually talking about 4. Maybe this isn't exactly what you're doing, but you get the idea.
Can you stand to have a slightly bugger size? Maybe try 256. Oh, and definately quit all other apps and perhaps turn off airport.

What can't we resize our pictures to fit as our wallpapers on the ios 7 system? nice photos are being zoomed in and cut off and theres no way to fix it, this need to be changes asap! back to the way it was on ios 6

what can't we resize our pictures to fit as our wallpapers on the ios 7 system? nice photos are being zoomed in and cut off and theres no way to fix it, this need to be changes asap! back to the way it was on ios 6.... FIX FIX FIX!!!!!!!!

Hello keraalovee,
Setting Reduce Motion in your Accessibility settings (Settings -> Accessibility -> Reduce Motion) can help alleviate this behavior.
iOS 7: How to reduce screen motion
http://support.apple.com/kb/HT5595
Cheers,
Allen

How do I change the layout in mail so the right side of all messages aren't cut off?

When I upgraded to the new Mavericks operating system I decided to give mail a go rather than using my internet based email. However, I cannot seem to adjust the inbox view so that my messages aren't cut off. Right now all of my messages are pushed over to the right and there is no way that I can find to move them to the left so I can read the whole message. I have the list of emails as small as it will go, but the preview section has a big white space to the left of messages and then the right side of the messages are all cut off. How can I fix this? THANKS

You could also try reading the Help instructions:

Problem: software changes my Outlook contact info when synchronizing (cuts off part of first name)

When I sync, the BB software cuts off part of the first name of my Outlook contacts. The problem seems to happen when I have a space in the first name (eg: First Name - Bill & Jane). I have several of my contacts listed that way so I can see spouses of contacts easily. I have never had this problem before with my other MS Op phone. Thanks for your help.
Message Edited by friedchicken on 01-05-2009 01:23 AM

I found out what happens.
Wherever the First Name filed on the BB contains a Blank (or Space) character, when synchronizing to MS Outlook, the content of the field is divided in two parts: the first part, before the Blank, is transferred to the Outlook First Name field, the second part, after the Blank, is transferred to the Outlook Middle Name field.
This goes beyond the useser's intentions and is a nuisance, becuase you can of course turn around the problem after synchronization, by exporting the MS Outlook contacts to MS Access, or MS Excel, put the two fields together, and reimport them into MS Outlook. But you need to do that each time yoy synchronize.
It would be nice if RIM could fix the issue.

Audio cutting off at the end of audio clips w no change in waveform?

Audio cuts off right at the end of some of my clips... I can still see the waveforms that have the full audio on them, but no audio plays for those last two or three seconds! My audio level is the same throughout the clip, so its not like its fading out or anything. This has been happeneing for a few weeks now, in multiple seperate projects.

Hi David,
Thanks for the response. I did look at the song that got cut off and it's a .m4a file. However, I also have normal audio that comes from an external Zoom recorder in .wav format that is getting cut off in the same way. The strange thing is I've never had a problem with this before a couple weeks ago. I've used this same song before and my external audio is always in .wav format

World series of poker cut off!

Well I have been folowing the WSOP for months. Was really looking forward to tonite, it was the final night of the event. The show was scheduled for 2 hours. Set the DVR to record the show. when it got down to 3 hand the show was cut off at exactly 2 hours. I had to go look it up on the web site to see who won. I am so **bleep** OFF right now! How do you guys mess something like this up??? If the show was 2 hours and 30 min, why did it not show up that way in the guide and record the full show? If I pull this kind of bonehead move at work I would be fired!

The guide data is provided by FYI Inc and is not good data at all. Verizon recently ran a survey about the guide data and i believe there were a lot of forum users who filled out the survey and pushed to have the company replaced.
"If your problem has been solved, please mark it as such. Don't forget to hand out your Kudos!"

Changing filter cut off on M series cards

Similar Messages

Maybe you are looking for