Changing font size in cash flow report
Hello ,
How can I change the font size that diplayed in the PLD of cash flow report ?
I tried to change the font size of single field and I cannot see the change in the printed report. If I would change the size of the field or the colour of it , the changes will take affect but the font size will not.
Does anybody have any solution for that ?
Thank You
Joseph
Hi Raul,
Thank you for your peply.
The PDF is disply exacly the same as the PLD.
The font size is not chanced.
Thanks you.
Joseph
Similar Messages
-
Change font size and layout of reports in Report painter
Hi,
I want to change the print layout and the fonts of reports created in Report Painter.
In the print output i am getting 40% of the total screen
My requirement is to increase the font size and the print layout to fullscreen so that the report layout fits to the page.
Kindly help.
ParinHi,
Well i generate a report which has two three columns.....
1) Description
2) Column 1 for fiscal year 2009
3) Column 2 for fiscal year 2008 for comparison
Here after these columns we have unformated space as a column.
Now we tried to hide this column but the system is not allowing to hide this.
How can we remove this unformatted column/space from the print output.
Thanking you,
Parin -
Hi ,
I want to know how to change font size in ABAP list report.
I want to enlarge the font size.
I have tried print control but it doesn't work.
I have also tried line size and line count
but it can only reduce the font size .
Thanks.
JohnHi Kong,
Try with following example:
REPORT ZFONT NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
NEW-PAGE PRINT ON.
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
PRINT-CONTROL FUNCTION 'SF008'.
WRITE: / 'This is CPI 12'.
PRINT-CONTROL FONT 1 LPI 6.
WRITE: / 'font 1 lpi 6'.
PRINT-CONTROL FONT 2 LPI 6.
WRITE: / 'font 2 lpi 6'.
PRINT-CONTROL FONT 3 LPI 6.
WRITE: / 'font 3 lpi 6'.
End of print-control
NEW-PAGE PRINT OFF.
End of Program
thnks
Anurodh -
Hi friends,
I want to change the font size in reports.
i want example program for that.Hi,
You can create workbook. Change the font size of the displayed result and save it. So every time you open the workbook and refresh the query output, the result will be displayed in the changed font size.
Regards,
Dinesh D -
Can i change font size in jasper exported Html report
how can i change font size in jasper exported Html report.
i also want table in that html report.So when is it going to be possible, I ask, as this is a question I and many others ask after each update!
-
In SAP 4.6c In classical reports output how to change Font size and Font type
Dear Experts,
In SAP 4.6c, in classical and interactive reports output how to change font size and font type.
Regards,
Zaker.These are HTML formatting questions. Nothing to do with the Oracle SQL and PL/SQL languages.
With old-style HTML, the font size and family are set using the font tag.
With modern style HTML, that is done using cascading style sheets (CSS).
Your favourite search engine will turn up tons of information on both. -
How to change font size and style in keynote for ios
How to change font size and style in keynote for ios
Same situation for report parameter input value font. What ever we do , it is still Arial and size 10.
-
How to change font size in Notification center?
Good day
I purchased new monitor with BIG resolution an dfount what font in notification message from Notification Center stay very small
I try to find place where possible change font siza but don't found anything
Please helpAFAIK there is no way to customize this font size. You can't resize the window either.
You need to report it to Apple Feedback so it can be logged and put in the queue to be fixed.
http://www.apple.com/feedback/macosx.html -
How to change font size in check printing program in AP Invoice
I would like to know how to change font size in check printing program in Oracle Payables Module for Invoice printing. We are using Oracle standard
report to print check.
Concurrent program short name : APXPBFEL
Prt file : APLASP.prt
I modified prt file for code 199 like below
code "199" esc "(8U" esc "(s0p12.00h10.00v0s0b3T" esc "&k11.75H"
Font size changed for last page only which prints checks, for Void pages its printed with default font. For Page 1 printed with default font and page 2 has reduced font. This change is not intiallized for all pages.
Please let me know if you any of you know how to change fonts.
Thanks,
Anand*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
-
Change Font size for Line printer when Printing ALV
We are using device type IBM 64xx LP+ emulation 1.00A to print to an IBM line printer.
I would like to change the font size of an ALV report I am sending to the device.
Can the font size be set in the Printer Initialization section of the Format?
Ex. I am using X_65_255
What/Where can I add the font size
Set to P-Series Emulation (SSCC P 0)
\0x1b\0x7c\0x7d\0x3b\0x50\0x30
Emulation Reset (SFCC @)
\0x01\0x40
Character Set = IBM PC, ASCII, IBM PC(0850) (SFCC l 0 0 1)
\0x01\0x6c\0x30\0x30\0x31
Print Mode/Pitch Selection = DP Quality, 20 cpi
\0x01\0x7c\0x7d;Sxxxxx;0;0;xxx;0024;0048
Line Spacing = 6 lpi (SFCC 2)
\0x01\0x32
Forms Length Set = 66 lines (SFCC LINES;66 <CR><LF>)
\0x01LINES;66\0x0d\0x0a
Thanks,
MikeYou will find the P-series emulation here: [LinePrinter Plus programmer's reference manual|http://www.printronix.com/WorkArea/downloadasset.aspx?id=4546] (printronix doc)
You don't have many options with P-series. Maybe it's better to choose another emulation, and get the IBM 64xx programmer's guide. -
Cash Flow Report S_ALR_87012271
Dear SAP Gurus,
I am trying to get cash flow reports thru S_ALR_87012271. For this, i have copied the form 0SAPRATIO-04 and created a Zform in tcode FSI6. But i not able to fetch data in the above report. Pls help and advise the future course of action. Need i do changes at the characteristics, sets and variables level??
regards!!Hello,
Create a form using FSI4 - Refer standard forms available in FSI5 and FSI6.
Create a report by using FSI1 (assign the form that you have created FSI4) - Refer standard reports available in FSI2 and FSI3.
Please make sure that you have completed your Financial Statement Version in all respects, before designing your cash flow statement.
Regards,
Ravi -
Cash flow report at buisness area wise
Dear all ,
Can any one tell me what is process of creat a cash flow report with report painter step by step,
Basically standard cash flow report s_alr_87012271/72/73 is not working .so tried to creta report painter through , so how to do this ...?
Regards
MilindHello,
Create a form using FSI4 - Refer standard forms available in FSI5 and FSI6.
Create a report by using FSI1 (assign the form that you have created FSI4) - Refer standard reports available in FSI2 and FSI3.
Please make sure that you have completed your Financial Statement Version in all respects, before designing your cash flow statement. OB58.
Cash Flow Statement (Indirect Method) Variant 1 and Variant 2, please note that these reports are coming from the form 0SAPRATIO-03 Cash flow (indirect) (Refer T code FSI5) and Reports 0SAPRATIO-03 Cash flow (indirect method) variant 1 (Refer Tcode FSI2) & 0SAPRATIO-01 Cash flow (indirect method) variant 2 (Refer T code FSI2)
0SAPRATIO-04 Cash flow (direct) Form
0SAPRATIO-04 Cash flow (direct method)
You should know what format you would like to see in the cash flow statement.
You should use the FS items accordingly copy the standard forms and changed according to your format.
You should be conversant enough to do basic report painter.
Pelase let me know if you need further help.
Regards,
Ravi -
Cash Flow Report - Direct Method
BW guru's, my client produces a monthly "Cash Flow" report based upon the "Direct Method". BW delivers an "Indirect Method" cash flow report which does not meet my clients requirements. So, I am looking for someone who has designed and implemented a "Direct Method" cash flow report in the FI and will provide a "How to" approach to this requirement.
Thank youHi,
It supports from EHP3 and EHp4 of ECC
which one you are using based on that you can do
The dat low is as below.
0figl_r20--
0figl_c20----
the above both s hould be moved to the 0figl_m20
0figl_v30
0figl_v31
both should be moved to the 0figl_m30
In the ehp 3
There is a one more feild of masre data
0ACCESSTP_ATTR
0ACCESSTP_TEXT
Access Method
R :- Direct access to ERP
C :- Access to BI
:- Both R and C
then there is one more feild there isa acces method , then for that acces type also will be loaded in cube , based on that you can for the acces method either direct or BI
Based on that you can check and try to show the report.
but the satandard report it is beasd on different financial satament of items, as per your orgianization financial staement of item , you should discuss with your FI consulatnat and do changes.
Thansk & Regarsd,
sathish
above those should be loaded both master data -
How To Assign FSV to Cash Flow Report/Form
I am working on Standard cash flow statement report - S_ALR_87012273/S_ALR_87012272 (can someone also tell me the difference between the two reports). can you please tell me what needs to be configured in order for this report to run and display data. I believe I need to change assign the FSV to Cash Flow form in Report Painter. AmI right, if this is the case where do I assign it. Because the cash flow report that I ran has FSV "INT" not the one which is configured.
Please reply as soon as possible
thanxAlready replied. Try it and revert back
Cheers
V.Krishnan -
Cash Flow Report FSI2 with Periods
I have developed the cash flow report by copying the standard form and report in report painter FSI4 and FSI2. Everything is working and the numbers are matching. But the selection screen and dynamic selection in standard report has just the year as selection parameter.
Can I add the period in the selection screen or something else to get the quarterly report out of it.Gary
You need to change your screen layout as shown below. Remove the tick mark for field that you want to display.
Hope now you can proceed.
Regards
Abbas
Maybe you are looking for
-
Importing partitioned table data into non-partitioned table
Hi Friends, SOURCE SERVER OS:Linux Database Version:10.2.0.2.0 i have exported one partition of my partitioned table like below.. expdp system/manager DIRECTORY=DIR4 DUMPFILE=mapping.dmp LOGFILE=mapping_exp.log TABLES=MAPPING.MAPPING:DATASET_NAPTARGE
-
There was an error downloading your purchased music. The disk could not be read from or written to. Does anyone know what this means? I purchased 2 films and cant watch them ;( I wonder if I will be charged??????
-
Hi All. Could anyone resolve my issue. I was created a package with an Script task written in VB.Net. The Package was executing Successfully in BIDS. But when i tried to exceute the same using Sql server Agent Job, Its getting Failed with the below e
-
Printing problem with Photosmart 5514!!
I have a Photosmart 5514 and have just started using it, and I've probably done something wrong as a beginner and I need help to fix the problem. How do I delete a print jobs waiting to be executed? I do not know why there is a print job in the queue
-
Building an active PHP page in DW
I have 6 months DW experience, and plenty of database experience, but not really much WEB database experience. I was wondering how difficult of project it would be to convert my small store to a PHP database-driven/active site, with the following con