Changing formats 16:9 to 4:3

can you switch formaTs in dvd player or front row?

well my dvd player on my tv is for playback only and i can change the settings. the reason i ask is i had a movie that was widescreen that played in the 4:3 mode. it was frustrating as everything was streched

Similar Messages

  • How Can I Change Format Mask For All Fields that type's Number Depend on Parameter in Report Builder 10g ?

    I want Change format mask for all fields that type's number
    Such as
    if  :parameter_value = 1 then
       all fields format mask = ' 999,999,990.000' ;
    else
       all fields format mask = ' 999,999,990.00' ;
    end if;
    Regards

    So, i have bad news for you : you'll have to rebuild again.
    Meanwhile i have excellent news for you : there's an online tool made by Johannes Henseler called Sidecar xml which builds the necessary xml file for you, sort of what you find in the Digital Publishing Folio Editor website, but saves it in your Folio folder.
    Next time you import all your folder (with that file), it will place all the necessary information, and even reorder the articles.
    Build once, play many times.

  • How to change format of phone numbers in PowerShell?

    We need to append the area code and hyphen in front of the office phone number field in their domain user account for all our users that have office phones now that we are changing from 7 digit numbers to 10 digit numbers.
    I found a script that finds and edits phone numbers, but the author chose a different way to format the numbers.
    This is the part of the script I need to change:
    # Format number as xxx xx xx xxx.
            $Phone = '{0}
    {1} {2} {3}' -f$Phone.Substring(0,3),$Phone.Substring(3,2),$Phone.Substring(5,2),$Phone.Substring(7,3)
    I'm trying to figure out how to edit that so that it formats it as xxx-xxx-xxxx
    (3 digit area code, hyphen, 3 digit prefix, hyphen, four digit number) instead of xxx xx xx xxx.
    Can someone show how to rewrite this section?

    The modified script:
    # This format number as xxx-xxx-xxxx.
    $Phone = '{0}-{1}-{2}' -f $Phone.Substring(0,3),$Phone.Substring(3,3),$Phone.Substring(6,4)
    Hope this helps.
    Regards,
    thennet
    Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable. This helps the community, keeps the forums tidy, and recognises useful contributions. Thank you!

  • E-mailed photo's change format

    I use Safari w/ Comcast.net to do e-mail. I scanned a picture and "saved it as" in the .jpeg format to my desktop. I then went to e-mail and sent it to my brother in law who has a PC. When he tried to open the attachment in said it was a .DAT file and he could not open it. This same thing happened to two other people I sent the photo to. My question is how come it changes format and how do I stop it????

    Good luck, I have been asking this question for a couple of weeks now. Safari changes my downloads to HTML. Nobody is good looking enough to give the answer. Maybe I will try another forum

  • How do you transfer files from mac to word pc for school?  Paper keeps changing format when professor opens it on PC

    I have Word 2011 on Mac 10.6.8.  I write my papers and save them as .docx  I submit them to my school online but every time My professor opens them he says the margins are set wrong.  He said to save them as a Word-Pc format.  How do I do this? Do I save it as RTF or as PDF?  He has to be able to make comments on the paper after along the right side.  I can not ask him to download anything t make it easier for me. I should be the one doing it correctly. I just do not know how.  Can you please tell me how I should be saving my papers so that they do not change format when he opens them on his PC?
    And I do recheck and open and repen my paper to check and recheck my margins before I submit it and all is fine on my end.
    Thanks for your help.

    nnigel, Welcome to the discussion area!
    I've been reading thru the discussions and yet to find a clear answer on how to transfer files from my external HD to time capsule.
    If it is directly connected to your Mac via USB or FireWire, Time Machine will include it in the backup.
    ...but is it difficult to point the library to the music file on the Time Capsule?
    iTunes for Windows: Moving your iTunes Music folder

  • How to change format of text in ticker view?

    Hi all,
    How to change format of text in ticker view?
    Thanks

    Hi,
    If you want to format the entire ticker with particular format then put in the Beginning text
    before Table tag
    put the font tag with needed attributes
    <Font> <table....>
    In the end text after table tag
    <table> close the font tag
    Thanks,
    Vino
    Edited by: Vinodh NK on Mar 18, 2010 4:36 AM
    Edited by: Vinodh NK on Mar 18, 2010 4:36 AM

  • Who change format date?

    hi,
    who i can change format date in servidor ORACLE for all client?
    Thank´s

    The default format can be set by changing the NLS_DATE_FORMAT initialization parameter and restarting the database, alter system set nls_date_format = "YYYYMMDD" scope=spfile; and the database has to be shutdown and restarted to enforce the change. It might be alter database instead of alter system, I usually try the wrong one first.
    But the setting can be overridden in the client setup or changed in a user session, there's no way to enforce a particular format on the client environment.

  • Exporting to CSV, a number field is changing format

    Post Author: MELANIE ELIASON
    CA Forum: Exporting
    Exporting to CSV, a number field is changing formats.  I have it excluding the decimals places and commas.
    Can anyone help?  I am using version 10.
    Mel

    Post Author: V361
    CA Forum: Exporting
    If you are exporting to Excel, it may be Excel that is changing the number format.
    you could totext , but then Excel will treat it as text and not as a number.
    May not be what you want.

  • In arobat the mail button changes format to .fil what to do

    plaese tell me what to do
    arobat changes format from pdf to .fil when mail button is pushed

    MAPI is typically required (Outlook generally uses MAPI for communication with other applications). You will have to check your mail client. It should also be defined as the default in your OS. I have one machine I could never get it to work on, but I have the advantage of just doing it on a different machine in that case -- typically a different version of Acrobat (I generally do not have upgrades).

  • Changing format of all graphics files is very cumbersome - how to make it less so?

    Hello,
    This problem is happening in FM 8, running on Windows XP.
    I have recently converted all the image files referenced in a book, from one format to another. When I open a chapter (.fm) file in that book, FM looks for the graphic file that has been referenced in the first frame it finds (I import all graphics by reference). It opens a navigation dialog so I can locate the missing file, at which time I select the new file instead. Unfortunately, I have to do this over and over, for each graphic referenced by the FM file. Isn't there a way for me to tell FM to look for the same base filename, but with a new extension? A default file type for imported files? Is there a way to modify the .fm file itself to change the reference to the imported graphics? Having to tell FM the new filename for every graphic in the book is cumbersome and time-consuming (and I will be doing the same thing for about 75 manuals!). If FM can remember the location of an imported file and look for subsequent files in the new location, can't it do something similar for file types?
    Compounding this problem is the fact that when the navigation dialog opens, the files in the current folder are automatically listed in "List" form, and are not in alphabetical order. If there are many graphics in that folder, it takes extra time to hunt for the desired file, so I usually change the listing format to "Detail" and then sort on "Name". But even that takes time. Are there defaults I could set so that the folder's contents are listed in the navigation dialog in the format I choose? I'm not even sure whether this is a FrameMaker or a Windows issue, so I don't know where to look for option settings. (I have poked around in FM options dialogs, and also the help files, but haven't found any references to this.)
    Help with even one of these would save me a lot of time.
    Thank you!
    Joyce Wermont

    Error7103 -
    Thank you for a quick response. I just tried this, and it seemed to work - I was able to edit the .mif file and change all the format extensions. Then I opened the .mif in FM and it looked OK, it loaded the correct graphic files automatically, and there didn't appear to be any scaling problems. But when I tried to save it as an FM doc file, it wouldn't allow that. Error message: "Filenames ending in .mif cannot be saved in Document format". I used Save As, btw. But it didn't work with plain Save either.
    It sounds like you've been successful in saving .mif to .fm - any tips?  Again, I'm using FM 8.
    Thanks,
    Joyce

  • Pulling my hair out: Change format from date to number format?

    I was recently sent a formatted Excel spreadsheet in which to enter my own numbers.  The format is date and duration, but the last column is the total number of hours and minutes converted into decimals, e.g. 3hrs. 30mins. = 3.5 hours.
    It was going fine until last night when I tried to enter 5:73 as a number, not a duration, but Numbers keeps changing it to 6m 13s.  I've tried changing the format from Duration to Number but although the cell will say 0:00, when I enter the number 5:73 it automatically switches back.
    The weird thing is that it's only happening on about one-third of the cells.  I even cut-and-pasted a section of the spreadsheet that didn't have this problem, cleared the contents and then typed my info into the same lines and rows and it's still doing the same thing.
    How can I see the hidden formatting in Numbers cells to see if I can figure what needs to be changed?
    Thank you.

    Hi Jane,
    dragging on bottom right corner but all that does is increase the range, not the size of the actual cell itself.
    Hover the cursor over the right of a column (Column B in this example) until the cursor becomes a cross with arrows pointing East and West. Drag right to widen the column.
    Or use the Format Panel > Table > Row & Column Size
    (You may have to drag the panel up to see this)
    I really miss in Numbers is being able to edit cell contents in a formula bar.
    Here is the formula bar in Numbers 3.2 after clicking twice on a cell
    The formula bar is moveable. Hover over the left of the bar until the cursor changes to a 'hand' and you can drag it.
    Resize the formula bar by hovering over any edge and drag
    Tricky with a trackpad, easier with a mouse .
    Also, the cell contents appear at bottom left of the Numbers window
    If you prefer Numbers 2.3, I agree it is much more user-friendly version.
    Regards,
    Ian.

  • How to change format of OOB columns in sharepoint 2010?

    Hi,
    I have an requirement of changing of date format from 12/05/2014  to 12 May 2014 in a list for 2 Out of Box columns: Created , Modified. Can some one please help me on this.
    Please find the screenshot in which columns are highlighted:
    Badri

    Hi,
    Please check below:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/ade1b4a2-7eac-479a-9dde-baa66eb18e36/how-to-change-date-format-of-sharepoint-list
    http://www.sharepointusecases.com/2009/01/customizing-datetime-format-on-a-list-view-web-part/
    Hope it helps!
    Thanks,
    Avni Bhatt

  • Changing format to an external hard drive

    so my external hdd is in NFTS and i want to change it to FAT32 so i can modify some files in my mac aswell as in my pc, but i'm scared of changing my disk format because i have a lot of important files in there which i cant backup because of its size and im not sure if changing the disk format with disk utility will erase my files
    http://www.macworld.com/article/1165513/how_to_share_an_external_drive_between_a _mac_and_a_pc.html
    I'm following this tutorial
    can i change my hdd format without deleting all my files in it?
    does the files inside are in any danger when changing the hdd format?

    Changing a drive's format erases its contents.
    (80436)

  • Trying to download a .tgz file without changing format

    I need to download a file with a .tgz extension, and keep it in this format once it's on my Mac, so I can transfer it to somewhere else. But when I download it, my Mac changes it to a .tar file.
    Is there a way to force it to download as a .tgz file, or is there a way to change it back from a .tar file to a .tgz file?
    Charlie

    Hi Charlie,
    what browser do you use? In Firefox and Seamonkey you can right-click the link and select "Save link target" from the pop-up menu.
    If this answered your question please consider granting some stars: Why reward points?

  • CS5 extended   color picker want to change format

    Color picker box has changed.  I would like to change it back so tones are in big box on left and colors or hues in small box on right

    Here is the link to the  information that was helpful to me: http://planetphotoshop.com/color-picker-versatility.html
    I had deselected the H button (on the right hand box with descending order of H S B  I had instead selected the S button and so the format
    that came up consistently was for Saturation instead of Hue. 

  • Problems to change format for webcam (linux)

    Hi,
    in this forum i found Ownes JWebCam. The code is really great and it helped a lot. In this code he searchs for all supported formats with the method CaptureDeviceInfo.getFormats(). In the program he uses only the formats he found. I thought this is a good idea and coded it myself for my program. My problem is, that changing or setting the format myself doesn't work. I set the format with FormatControl.setFormat() and this method always return null, only the smallest format i find works.. I thought i made some mistake but i couldn't find one. After changeing Owens code for linux and runing the program, i found out, that the captured video is just scaled up and still uses the low resolution of the camera after changing it to 640x480 and the method setFormat() return null, too. With JMStudio i can use higher resolutions, so it must work with the camera. Has anyone some hints for me?
    thx
    markus

    Hi,
    i found the solution on my own in firm this morning.
    For setting a new Format you first have to find all the supported formats with
    Format[] formats = camInfo.getFormats().
    camInfo is instance of CaptureDeviceInfo. After this i need a MediaLocator for my camera.
    MediaLocator ml = camInfo.getMediaLocator()
    With ml you have to create a DataSource with the Manager.
    DataSource source = Manager.createDataSource(ml);
    The next thing you need is a list of all FormatControls. I think you need this, because you need the correct FormatControl instance for the Format you want to set later.
    FormatControl[] formatControls = ((CaptureDevice)source).getFormatControls();
    Now you should have all you need to set a Format of your choice. Choose a Format out of formats[] you want to set. Save it in some variable. In this example i use the Variable myFormat. Now you have the Format you want to set. In the next step you have to find the compatible FormatControl for your wanted Format. To find it, you have to search the formatControls Array.
    Format finalFormat = null;
    for (int i = 0; i <formatControls.length; i++) {
    if (formatControls[i] == null)
    continue;
    if ((finalFormat = formatControls.setFormat(myFormat)) != null)
    break;
    If formatControls[i].setFormat(myFormat) doesn't return null, you found the campatible formatControl for your Format and set the Format.
    All you have to do now is to connect to the source, create a Player and do whatever you want to do with it.
    Player player = null;
    try {
    source.connect();
    player = Manager.createPlayer(formattedSource);
    } catch (Exception e) {
    e.printStackTrace();
    I hope this will help anyone. Owens code (http://forum.java.sun.com/thread.jspa?threadID=570463&tstart=50) is really great and helps a lot, thanks for this, but i didn't find out how to change the resolution for the camera. Maybe i was just too stupid to find it :-) With Owens code i could solve all the other problems i had.
    Have fun with this
    Markus

Maybe you are looking for