Changing FPGA target types after Obselescence
Hi. Can anyone advise of a clean way to migrate or copy / paste my CLIP modules between FPGA targets, please? I've about 30 test rigs, each testig a different product. Each contains a PXI-7833R card. We had one fall over recently and I learned that the card is now obsolete. The PXI-7842R is touted as a drop-in replacement. I'm finding the software support for migrating in the project to the new FPGA somewhat cumbersome. I had hoped I could simply change the device type in FPGA target properties, but it appears that I can't change the FPGA target type; apparently the target device can only be set when the target is first created in the project. Normally, this wouldn't be a problem, since the contents of the old (7833) target can be copied and pasted into the new (7842) target within the project. However, my FPGAs are now using VHDL components and the CLIP properties cannot be copied / pasted: they need to be added and configured manually, which is quite labourious. Each of my pijects might have 10 CLIP modules to manually configure and I'm dreading it, but in order to minimise test rig downtime in the event of a failure, I wish to build each of these projects for the new PXI-7842R target hardware in advance of requiring it. Anything the community can suggest would be a help. Thanks.
It probably would have been a good idea to hit "Preview" before posting. This is a re-post, but much more pleasing to the eyes!!
Can anyone advise of a clean way to migrate or copy / paste my CLIP modules between FPGA targets, please?
I've about 30 test rigs, each testing a different product. Each contains a PXI-7833R card. We had one fall over recently and I learned that the card is now obsolete. The PXI-7842R is touted as a drop-in replacement. I'm finding the software support for migrating in the project to the new FPGA somewhat cumbersome.
I had hoped I could simply change the device type in FPGA target properties, but it appears that I can't change the FPGA target type; apparently the target device can only be set when the target is first created in the project. Normally, this wouldn't be a problem, since the contents of the old (7833) target can be copied and pasted into the new (7842) target within the project. However, my FPGAs are now using VHDL components and the CLIP properties cannot be copied / pasted: they need to be added and configured manually, which is quite labourious.
Each of my projects might have 10 CLIP modules to manually configure and I'm dreading it, but in order to minimise test rig downtime in the event of a failure, I wish to build each of these projects for the new PXI-7842R target hardware in advance of requiring it.
Anything the community can suggest would be a help.
Thanks.
Similar Messages
-
Changing a fields type after validation
I am having an issue with trying to figure out how to change a fields type (i.e. User Entered - Required) after I validate a test sheet that the user filled out. It is basically an interactive answer sheet that grades itself when the user is finished answering the questions, I just need to know how to make that field read-only after the user has finished the test. Any ideas on how to go about doing this?
Thanks,
Ryan CrockerNo, it would be
GradeTest.access = "open";
You can see the Object Model reference guide at: http://www.adobe.com/devnet/livecycle/articles/Adobe_XML_Form_Object_Model_Reference.pdf
Chris
Adobe Enterprise Developer Support -
Change RPM Item Type after Item creation
There is a requirement where RPM Item Type needs to be changed for an Item after it is created.
Using the Override in SPRO we can enable field for change. But it does not really change all Decision points etc. I think it would not happen since ITem type drives everything once the item is created.
Please correct me if I am wrong.
Also, any other alternatives for this requirement besides starting all over again to create the Item?
Thanks!Hi,
1 - Map the permitted item types in the path: SAP Portfolio and Project Management > Portfolio Management > Global Customizing > Portfolio-Independent Settings > Define Portfolio Item Types
Select an item type, a decision point and then set the permitted item types for switch to.
2 - Make settings for process flow in the path: SAP Portfolio and Project Management > Portfolio Management > Global Customizing > Portfolio-Independent Settings > Process Flow for Items > Make Settings for the status mapping for itens
3 - In the portfolio item click in the "Change Process" yellow button.
3.1 Chosse the item type
3.2 Select "Delete previous decision points"
3.3 Save
Best regards,
Jonatan -
Changing doc. type after creating a doc. type.
Hi Friends,
We are doing our time ageing from the time of creating the document in DMS. We created a document with particular doc. type wrongly, after two days we found that the DMS creation was done with wrong doc. type. In this how to transfer to new correct doc. Type, if we delete this & create a new we canu2019t get any info that it was created two days back.
We made Z report for this time ageing report.
Regards,
Sai KrishnaYou cannot change the document type after the document has been created. The only way to do this would be with an enhancement and this would create major issues with the integrity of your system
-
Changing Document Type after making progress with project. Is it possible?
Can I still change my document type after I already started my project? I want to change it to print type.
Just what do you mean by "print type"?
Do you mean changing the document Color Mode to CMYK color from RGB color? If so, sure, you can do that at any time.
If you mean changing the "file type" (file format) (say from PSD to TIFF, etc.) you just do a Save As to create a new document in whatever format you want. -
Dear Guys,
how do i change a material type after it is created in material master...?Hi,
Material Type can be changed using transaction MMAM
Menu: - Logistics > Material Management > Material Master > Material > Change Material Type
Refer following link for the same;
[HOWTO change the Materials Type of a material master|http://www.sap123.com/showthread.php?t=21] -
Need to change the targeting group of a Rule or monitor after a alert is created.
Hi All,
I have created many alerts and they are working fine. Currently due to business requirement we have installed Windows server 2012 operating systems in our production environment. But we have targeted the
"Windows server 2008 r2 full operation system" group as per the below screen shot. As we now have to import the management pack for Windows server 2012 as well.
What we have planned is to change the targeting group from "Windows server 2008 r2 full operation system"
to "Windows server operating system group" so the alert / monitor or rule will target all windows server which has been discovered in SCOM rather that only the servers running Windows server 2008 r2.
I was also not able to set overrides for this as that server was not coming under Windows server 2008 r2 full operation system as it was a Windows server 2012 agent.
I can also go ahead and create new alerts but i have created custom of 1000 alerts and i cannot go ahead and re create them.
Is there any way to change them. If yes Can i do a bulk change via powershell ?
Below is the screenshot of what i really want. Can any on e please help.
Gautam.75801You can't really change the target class of a monitor in a sealed vendor pack. If this is your own custom pack, then you can change the target class no problem, but this would need to be done on the unsealed XML (using VSAE or some other authoring tool).
Then you can seal the pack and re-import (should be upgrade compatible, since you are just changing the target).
I'm not familiar with this particular monitor in your screenshot, but it looks like this should probably target Exchange? If this is the case, then I would recommend targeting the closest typed class that the monitor should run against. In this case, some
type of Exchange class that is already in the Exchange management pack.
Otherwise, you can also create your own custom class for targeting, which I describe in detail on my blog.
Here are all my sample VSAE fragments.
Here is an example of
using the Application Component base for your new class.
Here is an example of
using Local Application base for your new class.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com) -
Update of project planning after change in activity type
Hello Experts,
we are doing manual activity input planning ( CJ40 ) via customer report per year equal to project dates.
This means if we change activity plan price ( KP26 ) in future years, we need to recalculate the planned values in project system.
If we manually change values in CJ40 after changes in KP26 the system calculates the new monetary value in background
Example: Planned on project 10 Hrs a 20€ = 200€ // change price of activity type to 30€ // Plan 1 additional hour in CJ40: Monetary value changes to 11 Hrs a30€ = 330€ and posts +1 Hr with +130€ price difference.
Is there a opinion to adjust/update the monetary value after changes in KP26 without changing plan values?
ThanksHi Frank,
I am not sure what kind of project cost planning you are using. Usually it is either direct WBS cost planning with CJR2 or cost roll up from Network Activities and Orders or ECP.
The system will take AType price relevant for the period. If you have 100 hours with price 20 for Year N and 50 hours with price 30 for Year N+1, the planned cost will be 2000 + 1500 = 3500.
CJ40 is the Overall Planning, but you still can select a year (as a period). In the Overall view you have no button for Activity Input, it will show up only when you select a year.
Regards,
Paulo -
Change Mvt type after GI.
Dear All,
Can i change movement type after Goods Issue n if not........... what to do? bcoz i entered wrong Mvt type while creating GI.
can delete GI?
or Reversal entry.....
Thanks
M. Zafar SaeedHi,
Instead of Reversal the document, better you can cancel the material document.
During reversal, you have to enter reversal movement type and remaining details manually.
But to cancel the document, just you have to enter document no. Then system will take reversal movement type and other details automatically.
Cancel the material document, which is created at the time of GI using transcation MBST.
Transcation : MBST
Enter material document no and enter.
just save the document. System will cancel the material document.After then, you can do GI with the proper movement type.
Regards
KRK -
Can we change material type after creation of material
hi all ,
can any body tell me how we can change the material type of already created material , i have a material type (do not use raw material) which i want to chage in raw material
please replyHi Manjit
Try transaction MMAM
It may not work if you have some differences in field selection between the old material type and the new material type (e.g. batch mandatory in old material type and hidden in new material type)
It may not allow processing if stock has already been posted
Regards
Steve -
Navigation Bar Entry - automatic change target type
Hi,
A recent post (print friendly remembered me of something strange with the Navigation Bar Entry.
When I create an entry with Target type URL, and I put an URL pointing to my application (ex.: f?p=&APP_ID.:&APP_PAGE_ID.:&SESSION.::::::YES), it is automatically transformed to Target type Page in this Application.
Why is this happening?
Thx,
Louis-Guillaume
Homepage : http://www.insum.ca
Blog : http://insum-apex.blogspot.comIf you provide a URL that is an "f?p" URL to the current application then the edit page simply decomposes it to format it as "Page in this Application". But whether the URL meets that criteria or not, the actual data stored in the application definition for any URL target is the URL provided.
Scott -
Can we change the data type of a field based on the value of the field
HI Gurus,
My Requirement is as below -- Could you please guide me
in the Printable Adobe form -- for ex - as usual for dates fields in the Object Pallette the object type is a date/time field and for quantity/currency fields corresponding fields are taken
now in case the either the date, quantity or currency is initial in place of displaying 0.00 or empty date we need to display N/A (Not Applicable)
for this I would like to change the data type of the field
to put it simply --
we need to change the data type of date field from DATE&TIME to Char type to hold N/A or Quantity field to Char field to hold N/A
how can we realize this in SAP adobe forms
Thanks in Advace
Ramchander Rao.KHello Ramchander,
You cannot change the data type of the field at run time in Adobe forms because the type of field you choose at the time of design level is associated with the data type itself.
If you want to achieve your requirement, then your main idea should be to set the data type as CHARACTER itself while designing the field in the adobe form itself. CHAR field will comfortably hold the value of Calculation/amount field, Currency field, Amount, Date, Time HHMMSS, Unit Accuracy, Currency key, Floating point number, Numeric text, Client, Language and many other data types.
After designing the field as TEXT field in Adobe form you have two options.
Option 1:
Select the Date field initially as type TEXT field or CHAR field in Adobe forms.
Suppose the name of the field is TEXTFIELD1, then write the Javascript code on this field in Initialize event as below.
if ( this.rawvalue == null )
this.rawvalue = "N/A";
If the field is not blank, then it will show the date. Else it will show "N/A".
Option 2:
Select the Date field initially as type TEXT field or CHAR field in Adobe forms. Do the formatting part in ABAP itself. It will increase the performance. Avoid Javascript as much as possible.
Suppose you have a DATE variable l_dats of type DATS. Then take another variable l_date of type CHAR. Then write the below ABAP code.
MOVE l_dats TO l_date.
IF l_date IS INITIAL.
l_date = 'N/A'.
ENDIF.
Bind the l_date to the TEXT field in the form.
Even in this case, if the field is not blank, then it will show the date. Else it will show "N/A".
But I will suggest you to use Option 2 of keeping the AMOUNT, QUANTITY, DATE, TIME fields etc as CHAR or TEXT fields in Adobe form and do the required formatting in ABAP itself. -
Error while updating to target type INFOCUBE
Hi,
After BI SP16 Upgrade, we noticed that data load to a cube with DTP (7X DS) with partioning active, it would error out saying, "Error while updating to target " " type INFOCUBE....we applied note '1148007' and did reactivation of related structures and objects but still same error....As soon as we deactivate partioning, data load would go thru easily and successfully but we want to have partioning "Active"......I was wondering if anybody ran into this issue and get it resolved...Any help or helpful hints would be appreciated...
Thanks..Hi,
take a look:
Error while updating to target ZXXX (type INFOCUBE)
Error while trying to make infoobject as data target
Regards
Andreas -
How to change the billing type Rv to DG
Dear all,
when ever we are doing the return order to a sales we will create a customer credit memo through the VF01 T-code.where billing type will be customize one that is credit memo..
once we save that the in customer G/L we are getting the document type as RV instead of DG.
please tell me how to change the document Type in customer Ledger.
regards,
chethanHi,
Just to draw your attention that DG is doc.type used to issue credit memo from FI (t.code FB75), where it does not involve the inventory movement.
Whereas the credit memo generated from OTC cycle (i.e.VF01) involves inventory movement. Ideally, both of these types of credit memos should have different doc. types, so that users can distinguish the returns based on doc. types later on.
So, after explaining the above, please check with your business thoroughly if they really need to use DG instead of RV. I would suggest to create new doc. type 'ZC' and set up through VOFA.
Thanks,
Nirav -
Problem when changing the target quantity for a contract
Hello,
I have a problem when i try to change the target quantity for a contract through the BAPI 'BAPI_CONTRACT_CHANGE'.
I filled the tables 'item' and 'itemx' with new values. the BAPI 'BAPI_CONTRACT_CHANGE' returns no error, but after using the BAPI 'BAPI_TRANSACTION_COMMIT' I get an info message from SAP and the modification does not pass.
In debugger I could locate the error. In fact, the appeal of FM 'ME_UPDATE_DOCUMENT is done with a table XEKKN with the new values of the quantity and a KZ code equal to ' I ' to insert, then it must have the value ' U 'for update .
Is someone can help me to solve this problem?
Thank you in advance.Have you tried selecting the page, and then changing the theme directly on that page?
Maybe you are looking for
-
Can't Print to Epson Printers from Photoshop
Hey everyone - for some reason I am unable to print from Photoshop CS6 to two different Epson printers - an Epson 9800 and an Epson 7880. I have tried to print from three different computers (OS 10.6 and OS 10.8) and have also tried three different U
-
Repeated installation freeze (with screen shots)--suggestions?
I have an ongoing issue with Flash installation. Running Windows 7 64bit on a Lenovo T410. Ancient junker, but doing alright other than this Flash issue. The Chrome integrated flash is fully operational. The issue is installation for Firefox 34.0
-
new iMac, old external hard drive - where do I plug it in?
-
IPad to Printer without network or computer - is it possible?
Hi everyone! It is possible to print from an iPad to a Wi-Fi or AirPrint enable printer without a network and without a computer? Direct communication between the iPad and printer wireless? since both have wi-fi. Thanks
-
Problem starting Design Console
I get this error when starting the OIM design console Error Keyword: DAE.CLIENT_NOT_BOUND Description: Database client has not bound to the server-side database object. Either the client database object has never bound to the server-side database obj