Changing fps but not time

OK, i have to do a project that has to be done SOON, so the
faster the response, the better.
Is there any way for me to make the fps larger but keep the
time the same? e.g.: a 30 second clip at 10 fps, but changing it to
30 fps while still maintaining 30 seconds

not that easily, you can change your fps whenever you want
but then you need to move all the keyframes as well.

Similar Messages

[solved] Changing date but not time

Hello,
I already searched the web but all examples how to change date involved changing time as well.
date -s "7 April 2008 20:42:45"
date -s "7 April 2008 20:42:45"
I need a script that does the follow.
1. Save the current date
2. Change the date to a defined one (but not the time because that conflicts with NTP)
3. Start a program
4. Wait for the program to be closed to restore the original date saved in 1.
How would you write such a script in Bash without changing the time?
Last edited by orschiro (2013-04-07 21:22:52)

Thanks for your replies. I did not know that time and date are inevitably connected to each other and that changing date does always mean changing time as well.
@Trilby,
I indeed want to circumvent a trial-period. I am working on a Linux compatibility version of Prezi Desktop which is no longer provided in an official version. Many people contacted me with issues they are facing that I cannot testify as I do not have a 'Pro' account for which one has to pay. I generally pay for software but in this special case I do not want to pay for an account realising that in fact I cannot use the software due to compatibility issues.
As such, I already tried libfaketime but I failed to get it working with Adobe AIR 32bit on my 64bit system. I am aware that I am doing something that I ought not to do but I am not willed to pay for broken software.
@moetunes
[orschiro@thinkpad ~]$ date -s '7 April 2008'
date: cannot set date: Operation not permitted
Mo 7. Apr 00:00:00 CEST 2008
You see, date -s would reset the time to 00:00 which is not what I was looking for. I want to save my current time to restore it again after closing the program.

Batch Change Photos' Date - Not Time

Is there a way to change a bunch of photos' date, but not the time?

Neil:
Not in iPhoto. Unfortunately you've go to change the time as well. If there are not too many of them you can do it this way.
1 - move all that you want to redate to the same date to a new roll.
2 - in the Finder copy the folder in the Original folder that represents the roll with the files to be redated to the desktop.
3 - using an application like PhotoInfo batch change the date to whatever you need. It can just add or subtract a specific number of days, months or years to the date as you see fit.
4 - change the name of the folder and import back into iPhoto.
5 - delete the original roll of photos with the incorrect date.
That's about it. It's not too convoluted and can be done. This way the new date will be embedded in the file and stay with it if needed in a new library or other application.
Do you Twango?

Quickest way to change speed but not clip duration

I'm trying to determine the fastest method for changing the speed
of a clip already in the timeline, but not the clips duration. Primarily, slowing a clip down.
The best I've come up with so far is to put the timeline playhead over the
clip and hit X to get the clips IN and OUT points placed in the timeline. Then,
drag the clip into the Browser, effectively making a copy of it there. Then bring the clip into the Viewer, then hit APPLE J to bring up the speed change window, affect the change, then overwrite the change you've made in the viewer back down into the timeline where you placed the original IN and OUTS. Seems like alot of step.
Is there a faster way? Any change I try to make in the timeline itself results
in a clip duration change. The only other way I've found it to use the time remap tool put that is even more complicated and is alot less exact when trying to make something, say, 50% slower.
Any input would be appreciated.

Another, close but not quite there method I've tried is the TIME REMAP tool
that lives with the SLIP AND SLIDE.
I can affect speed changes, and see what percentage speed change I'm
trying to make, but it wants to change speed on both the left and right side
of the clip. In other words, I can't place the timeline playhead or Time remap tool at the beginning or end of the clip and only effect the speed of the entire
clip unless there is no clip adjacent to the clip I'm trying to change.
Otherwise it changes the speed as I want for 99% of the clip and then during
the last several frames I've accidentally sped up up those frames. I can't position it to just change the speed for the entire clip.

Mountain Lion 10.8.2 Heavy background disk activity but not time machine

Since accepting the Software update that puts my version of ML as 10.8.2 I have began to notice a regular (every hour) constant heavy activity in one of my drives (yet to identify which one).
The said drive(s)?? whirr up and carry out activity that sounds as if it were carrying out a time machine backup BUT there is no indication that time machine is carrying out its job nor are any of the backups date/time stamped for the activity taking place.
Any ideas as to what is happening would be greatly appreciated as it is becoming rather annoying to listen to heavy background activity without being able to identify what is happening.
Thanks in advance
Les

Hi, Was looking through the forum because of a similar issue that occured twice yesterday. I was cleaning up and consolidating my externally connected disks (too many backups) 1 x USB connected, a NAS store and my Airport time capsule. After a long session of deleting files I got the spinning globe on the finder window, I could not access other apps to look at what was going on, but I could here the Time Capsule rattling away. Left it for 20 mins still the same, so had to crash the system to recover (hold power button in). Four hours later and more tidying up, went to shut down and again heard the Time capsule rattling away but this time I got to the white screen and the spinning circle. Twenty minutes later still not shutdown so another crash of the system.
I am not sure whether this problem is the same as you have described but there are similarities hence I thought I would post.
Hope we can find a resolution
Apologies need to update my profile, have iMac 27inch with 10.8.2
Jim

Help: Changing city but wrong time shows up!

My Nano syncs up the time and date when I connects to my computer...but when I try to change the city the time adjust to that city time. Is there a way to set my home city time?
Thanks
Derek
Toronto

Hello Derek,
First step, is your time zone setting correct? My Mac says you should be in the EDT zone.

When downloading/uploading any file with Firefox, Finder shows date but not time

On my iMac, as I either upload or download a file using Firefox after installing Lion, the Finder window that opens for me to tell it where to either download the file to or upload it from, shows dates of all the existing docs there, but not the time. How can I make it show the time as well?

I have found the problem.
A download manager had been installed for a specific website and it was butting in all the time. Even after removing it with 'Add or remove software' it still had its hooks into the system and it was impossible to download anything as it now would not run.
Had to do an XP 'System restore' before I could get rid of it.
The offending program was MD_setup.exe size 3,045KB from the themediadownloader.com

How to change tone but not colors?

Hi,
I am a big fan of color fidelity - i.e. of preserving the colors as they were in reality when the picture was taken. I do not like for instance when a red sign in a building looks orange-red in my calibrated monitor. I have taken the steps to photograph the ColorChecker at both temperatures and create a profile with the DNG profile editor. In general, the colors look accurate, but once in a while, for some reason, the color is off (even with custom WB). This is a problem...
A related problem surfaces when I want to change the tone of a picture, be it because it is too dark or too light to begin with...or, a change in the contrast also. I am never sure if I am changing the color when I change e.g. the Exposure, the Blacks, the Brightness, the Contrast slider, the Tone Curve. As to what defines color, I am not even sure what constitutes a change of color: whether keeping the Hue but not the Saturation or the Brightness (in HSB coordinates) is enough to not change the color (at least its essence which seems to me is given by the Hue), or whether I need to preserve the Saturation as well as the Hue allowing the tonal changes to change the Brightness of the color only.
Once I get an agreement about these concepts from other people in this forum, then my obvious next question would be, which sliders or controls in which panels in Lightroom 2 can I use that would guarantee the not modification of color in my images (which might vary with the definition of color)?
It is very likely that I will get responses saying that the color is not defined by only its Hue, nor only its Hue and Saturation but by its Brightness as well. Why did I not consider that as an option to keep a color constant when making tonal changes? Simple: I do not see how I could change the darkness/lightness/contrast of an image if the HSB of each color must remain constant. If I keep all triplets constant in an image, then how can I modify that image? Therefore I have deduced that at least one of each triplets' values MUST be allowed to change and those values are 1st Brightness and 2nd Saturation. Hue, I feel, is one aspect of color that must remain unchanged by tonal manipulations.
So, what are your thoughts on this, everybody?
Thanks,
Juan Dent

hI,
Thanks for the responses -- and I understand your points. However there is at least a scenario where one needs to have accurate color in a verifiable way:
reproduction of art works
reproduction of printed photographs
Agreeing with your comments, how can I achieve the above tasks, accurately? How can I measure my accuracy?
Thanks,
Juan

Reverse changes made but not published

I’ve made three calls to Apple Care tech support who give me the IWEB support people but I’m not getting a satisfactory answer to my question. I built a nice little website for my pet sitting business using the IWEB application and was happy with it. But everyone complained I was not being found in any search engines and that I had to bypass the IWEB application and use an SEO tool to add “key” words into the script.
I started out OK, but couldn’t do the whole site in one sitting including updating all the links etc., so I saved but DID NOT publish. I now no longer want to try and bypass the IWEB app because its just too confusing to me to try and make minor changes when I want to regarding the content and now the links are all screwed up because I was instructed to bypass Apple’s navigation bar and put in one with the SEO tool. Anyway, my question is, how can I revert back to my original site (which appears to the public) but not on the IWEB files I have to work with on my computer?
I saved copies of the site before I tried to change it, but the Apple people say that the HTML files are gone and can’t be retrieved because I don’t have a copy on my IDisk anywhere. Not sure what that is. Other than starting from scratch and building an entirely new site, is there anyway to retrieve the html files from what I saved and be able to just copy them back into the IWEB application? I am a major computer dyslectic when it comes to understanding all this stuff, so I’m totally confused and would appreciate any help you can offer.
Thank you very much.

Welcome to the discussions.
SammamishLady wrote:
...is there anyway to retrieve the html files from what I saved and be able to just copy them back into the IWEB application?
No — only iWeb's Domain file can be opened in iWeb. See this Apple doc on How to back up MobileMe data. It says:
“Any websites you have published with iWeb should still be available within iWeb. iWeb stores everything in a Domain file, normally located in the ~/Library/Application Support/iWeb folder (although it can be moved). If you no longer have this file, you can view your currently published pages and manually recreate them within iWeb, but *there is no way to import published pages back into iWeb*. You can manually back up the Domain file, or use Backup to back it up.”
Consider using another site builder — weebly.com is a popular, free web-based builder which works via drag & drop in your web browser. Here are some links to just a few of the features Weebly provides:
_Visitor Stats & Search Engine Optimization_
Sub-Pages
_Photo Slideshows_
_Photo Galleries_
E-commerce
And Weebly sites are now mobile friendly — click here:
http://blog.weebly.com/2/post/2010/12/your-websites-are-now-mobile-friendly.html http://blog.weebly.com/2/post/2010/12/your-websites-are-now-mobile-friendly.html

Muse updates the changed text but not the images

Hi,
So I love muse, but I have a big problem, which is that when I publish changes to the site (using BC) it updates the text changes I have made, but not the images.
I have tried everything, including deleting the original files and creating new buttons, I have created images behind the text buttons instead of having the images as backgrounds in the text.
Still nothing (I have cleared my caches and checked on other computers too)
published site:
in muse, and what I want it to be:
The weird thing is that it updates the text, which unfortunatly makes it look worse than if it did nothing.
Any advice and help would be greatly appreciated.
Anders

Hi,
It is advisable to use the latest version of adobe air with Muse. You can download the latest Air from https://get.adobe.com/air/
Regards,
Aish

Can't send messages on mac. Changed phone but not number

Immesages say they have sent on mac but not received by conatct and do not pop up on phone

Hello,
If you open the Activity viewer (click on Window in the menubar and choose Activity) and watch when you try to send, what phases if any are indicated are taking place before failure?
What type of authentication is required for this SMTP? When using in Entourage, what are the selections in Advanced sending options, particularly regarding the box beside Use same settings as receiving mail server?
Ernie

How do you Change Pitch but not Tempo in Time Machine?

I have an imported audio aiff which i want to put up by 200 cents - the Pitch transposes fine but the Tempo of the track increases.
How do I set Time and Pitch Machine to keep the Tempo the same? In the Tempo Origin and Destination boxes the figure is the same - still Pre Listen shows the Tempo has gone up...
NB I tried 'Detect Tempo' and the audio track to establish the tempo - it said 102bpm ( i.e. not the tempo of the the logic document sequence.. the audio track bears no relation to the existing tempo of 120bpm in the Arrange) I put that Tempo 102bpm into Original and Destination boxes. Still the Tempo did not remain the same

It shouldn't change the tempo if you just change the pitch destination.
I tried it, and when I shift a track 200 cents up WITHOUT changing the tempo section, it does exactly that. No tempo changes.
Mode: Free
Algoritm: Universal
This is in Logic X btw.
PS: if you do keep getting this problem, why not use the Logic pitch shifter?

Changing date but saving time

I have some code where I copy records from one partition to another partition the table has the
followin partition.
PARTITION BY RANGE (CREATE_DATE)
I would like to change the date to a new value for the destination record but keep the time.
Here is my code, can somebody provide an example of how I can do this
CREATE OR REPLACE PROCEDURE C0HARPA.mtas_req_feat_copy_part
(p_create_date in DATE, p_create_date1 in DATE)
IS
-- desc mtas.mtas_req_feat;
-- REQUEST_SEQ NUMBER                           NOT NULL,
-- MTAS_SYSTEM VARCHAR2(15 BYTE)                NOT NULL,
-- FEATURE      VARCHAR2(64 BYTE)                NOT NULL,
-- FLAG         VARCHAR2(16 BYTE),
-- CREATE_DATE DATE
TYPE myarray IS TABLE OF mtas.mtas_req_feat%ROWTYPE;
l_data myarray;
myREQUEST_SEQ mtas.mtas_req_feat.request_seq%TYPE;
CURSOR r IS
SELECT * FROM mtas.mtas_req_feat r
WHERE r.create_date >= p_create_date
AND r.create_date < p_create_date + interval '1' day;
l_start number default dbms_utility.get_time;
rows_processed number :=0;
BEGIN
-- To prevent ORA-20000: ORU-10027: buffer overflow, limit of 2000 bytes
DBMS_OUTPUT.ENABLE (buffer_size => NULL);
select max(REQUEST_SEQ) into myREQUEST_SEQ from mtas.mtas_req_feat;
DBMS_OUTPUT.PUT_LINE('High Value REQUEST_SEQ is '||myREQUEST_SEQ);
OPEN r;
LOOP
    FETCH r BULK COLLECT INTO l_data LIMIT 10000;
    FOR j IN 1 .. l_data.COUNT
    LOOP
      l_data(j).create_date := p_create_date1 || (NEED TIME FROM SOURCE RECORD);
      myREQUEST_SEQ := myREQUEST_SEQ +1;
      l_data(j).request_seq := myREQUEST_SEQ;
      INSERT INTO c0harpa.mtas_req_feat VALUES l_data(j);
      rows_processed := rows_processed+1;
    END LOOP;
    FORALL i IN 1..l_data.COUNT
      INSERT INTO c0harpa.mtas_req_feat VALUES l_data(i);
    COMMIT;
    EXIT WHEN r%NOTFOUND;
END LOOP;
COMMIT;
dbms_output.put_line
     (round((dbms_utility.get_time-l_start)/100, 2) ||' Seconds...' || rows_processed || ' Rows Processed' );
CLOSE r;
END mtas_req_feat_copy_part;
I am calling like this:
sqlplus / <<EOT >> $LOG 2>&1
set serveroutput on
SET PAGESIZE 0
SET FEEDBACK OFF
SET VERIFY OFF;
set heading off;
set line 200
exec C0HARPA.mtas_request_copy_part ( to_date( '2011-09-01', 'YYYY-MM-DD' ),
                                                           to_date( '2011-09-02', 'YYYY-MM-DD' ))
exit;
EOTThanks to all who answer

840386 wrote:
I have some code where I copy records from one partition to another partition the table has the
followin partition.
PARTITION BY RANGE (CREATE_DATE)
I would like to change the date to a new value for the destination record but keep the time.
Here is my code, can somebody provide an example of how I can do this
CREATE OR REPLACE PROCEDURE C0HARPA.mtas_req_feat_copy_part
(p_create_date in DATE, p_create_date1 in DATE)
IS
-- desc mtas.mtas_req_feat;
-- REQUEST_SEQ NUMBER                           NOT NULL,
-- MTAS_SYSTEM VARCHAR2(15 BYTE)                NOT NULL,
-- FEATURE      VARCHAR2(64 BYTE)                NOT NULL,
-- FLAG         VARCHAR2(16 BYTE),
-- CREATE_DATE DATE
TYPE myarray IS TABLE OF mtas.mtas_req_feat%ROWTYPE;
l_data myarray;
myREQUEST_SEQ mtas.mtas_req_feat.request_seq%TYPE;
CURSOR r IS
SELECT * FROM mtas.mtas_req_feat r
WHERE r.create_date >= p_create_date
AND r.create_date < p_create_date + interval '1' day;
l_start number default dbms_utility.get_time;
rows_processed number :=0;
BEGIN
-- To prevent ORA-20000: ORU-10027: buffer overflow, limit of 2000 bytes
DBMS_OUTPUT.ENABLE (buffer_size => NULL);
select max(REQUEST_SEQ) into myREQUEST_SEQ from mtas.mtas_req_feat;
DBMS_OUTPUT.PUT_LINE('High Value REQUEST_SEQ is '||myREQUEST_SEQ);
OPEN r;
LOOP
FETCH r BULK COLLECT INTO l_data LIMIT 10000;
FOR j IN 1 .. l_data.COUNT
LOOP
l_data(j).create_date := p_create_date1 || (NEED TIME FROM SOURCE RECORD);
myREQUEST_SEQ := myREQUEST_SEQ +1;
l_data(j).request_seq := myREQUEST_SEQ;
INSERT INTO c0harpa.mtas_req_feat VALUES l_data(j);
rows_processed := rows_processed+1;
END LOOP;
FORALL i IN 1..l_data.COUNT
INSERT INTO c0harpa.mtas_req_feat VALUES l_data(i);
COMMIT;
EXIT WHEN r%NOTFOUND;
END LOOP;
COMMIT;
dbms_output.put_line
(round((dbms_utility.get_time-l_start)/100, 2) ||' Seconds...' || rows_processed || ' Rows Processed' );
CLOSE r;
END mtas_req_feat_copy_part;
I am calling like this:
sqlplus / <<EOT >> $LOG 2>&1
set serveroutput on
SET PAGESIZE 0
SET FEEDBACK OFF
SET VERIFY OFF;
set heading off;
set line 200
exec C0HARPA.mtas_request_copy_part ( to_date( '2011-09-01', 'YYYY-MM-DD' ),
to_date( '2011-09-02', 'YYYY-MM-DD' ))
exit;
EOTThanks to all who answersince we don't have your tables or data, we can't run or improve posted code.
to_date( '2011-09-02', 'YYYY-MM-DD' ))time component for DATE above will be all zeros (00:00:00)

Editing date but not time

I am trying to alter the date on a batch of photos but leave the time taken the same. Using batch change won't allow me to achieve desired results

Do not use batch change - use adjust date and time - just above batch change
LN

PC can connect to internet but not time capsule

We are having no trouble getting onto our internet or accessing the time capsule with our Mac. However, the PC we have can get onto the internet, but is unable to access the time capsule. We need to be able to backup information from both of our computers.
Please help us!

Did you install the Airport utility onto windows? If not do so.. it should include bonjour which helps greatly. Make sure it does.
TC and wireless names may prevent access to resources.. are your names Apple style with that wonderful apostrophe.. illegal in the windows world?? Spaces in names also not legal.
Change all names to SMB type.. short .. no spaces.. straight alphanumeric.
Do you have permissions issues.. ??
Have you opened file sharing and turned on the guest account.. read and write access.
Do you have the right workgroup..?
Please put in WORKGROUP.. assuming that is the workgroup.
If you still have issues.. are you using homegroup in windows.. well stop it.
If you still have issues .. are you connecting correctly using proper URL in windows explorer, ie \\TCname or \\TCIPaddress (obviously replacing with actual name or actual IP)
If you still have issues.. ping the TC by name and IP and turn off all firewalls.
Do each in turn.. even step 1 might be enough.

Changing fps but not time

Similar Messages

Maybe you are looking for