Changing Frame Size in MPEG_Streamclip for FC

I have a 4 cameras shoot with 3 cameras filming in PAL at 1920x1080 interlaced, and a different 4th camera filming at 1440x1080 interlaced. I'm trying to convert the 4th camera to match the others, and do a Multiclip editing. So I used MPEG Streamclip for conversion and opened a Destination Folder. But when I imported the 1920x1080 converted files from that folder into my project they were 1440x1080 ! Does anybody have a solution please? Thank you in advance.

Similar Messages

Successfully changing frame size of footage shot portrait on iphone4

ive been fighting the iphone embedded orientation lock for shot footage.
i have a clip i hit record at the beginnin gthe the phone didn't realize i was recording it widescreen (landscape).
i tried rotating in final cut, but since the frame size is 720x1080 and not 1080x720 after the footage has been rotated the original size of the frame is naturally cropped it.
i transcoded the orig clip in compressor to the correct frame size, but it's now squeezed.
how can i get this clip to be 1080x720 non anamorphic?

You can't add what's not there...
You will have to scale up the video to the width of your canvas... being that the original source is not really a decent camera (and you wouldn't want to do this with a decent camera either), your resulting video will look fuzzy and/or pixelated...
Or you can also change your sequence settings to SD (720 x 486)... but it all depends what is the end use of this video...

Changing Frame Size in MPEG2

I'm using compressor to change less than stellar VHS video to MPEG2. I see that compressor has an option for frame size, but its ghosted out for MPEG2, can this be overridden in any manner? MPEG2 can be resized to LoRes MPEG2, with other programs, to 352x240 which is VHS quality and would make the video look generally better on a TV.

MPEG-2 (or MPEG-1) output file frame size can't be altered in Compressor. Sorry.

Help! Trying to change frame size of project/sequence

I have tried everything I can to change my project's frame size to 320 x 240 from 720 x 480--modifying sequence settings (nowhere to change size, just "timeline options" and "render control" tabs), clicking on the sequence's frame size in the browser (even with option and command), going into user preferences, system preferences, item properties, project properties without any dialog box that will help me make the change. I checked off "Prompt for seeings on New Project/Sequence" in User Preferences, but it only gives me a pop-up menu with the Easy Setup options. What's happening? This is taking me forever to figure this out. Any help would be greatly appreciated. Thanks.

Hi Bob,
Why do you want a project at 640 X 480 ? You will not be able to print it to your camcorder.
Just put those values in quicktime conversion box, and your exported movie will has this frame size.
May be the confusion become from the aspect ratio of pixel...
DV pixel are displayed "as square pixels" in Final Cut Express, if you uncheck this option in viewer, you will get a horizontal squashed image.
That's because TV set do not handle pixel like computer monitor and your camcorder record it with this aspect.
So don't be concern with the 720 or 640 question: just export your movie using quicktime conversion set to 640X480 for viewing on computer (like I suggest earlier) or simply "print to tape" from FCE to your camcorder (with stretched pixel for TV monitoring).
Michel B.

How to Change Frame Size in FCE 2

Hi,
I'm very new to this video stuff. Is there a way to change the frame size in FCE 2? When creating a new project there are different options for the type of video but there does not appear to be a way to change the frame size from 720 x 480. I would like to use a different frame size.
Thanks!!
john

Tom Wolsky wrote:
FCP can. What size is the material and where is it coming from?
The material is 360 x 243, it is a .mov file from a SVHS transfer. Is 360 x 243 a standard size for an SVHS transfer? I expected the frame to be 640x480.

How do I change frame sizes to user-defined frame sizes

Hi,
I hope someone can help me. I dont know how to change my project frame size to a user-defined frame size.
( like from 1920x1080p to 575x900p ) Ive found nowhere a answer to this question.

You can try this workaround:
http://library.creativecow.net/payton_t/FCPX_Custom-Resolution-Timelines/1

In IOS7.1.2 how can I change the size of type for Photo Album?

I want to change the size of the type of a name of a Photo Album to match the size of earlier albums. How can I do this?

I am not sure, if this Will work on the title page:
Edit text on a page
Tap Projects, and tap the photo book to open it.
Double-tap the page containing the text you want to work with.
Do the following:
Align the text: Tap the text box, and choose an alignment style from the menu that appears directly above the text box.
Choose the font size: Tap the text box, and tap the font size you want.
Make changes to the text: Double-tap the text box, and type.
You may need to change the Book Theme to have a different title font size.

What settings are needed for Flip 4 Mac to change frame size?

I just installed Flip 4 Mac Studio Pro so that I can make wmv files in different sizes. It works in 340x240 and 480x360, but freezes up when I choose the preset 384x288. Are there other settings that need to be changed to make this work. I thought this version of Flip would allow me to do most anything.
I'm exporting a short 4 min sequence from FCP using Quicktime conversion.

This will give you the instructions on how to set it up step by step.
http://community.virginmedia.com/t5/Email/Setting-up-access-to-Virgin-Media-NTLW ORLD-email-on-iPhone-or/td-p/883445

Changing Page Size and Margins for existing document

Hi, really new at using InDesign and have a question.
I have an existing document about 40 pages containing text and graphics.
I need to change the page size from the original 8x10 to 8.5x11 as well as change the left margin from 0.5" to 1"
If I simply change these in File>Document Setup and Layout>Margins will everything change and convert?
Or put another way will I have to move everything around on all the pages once the new sizes are input?
Thanks!

You may get different advice from someone else, but if you want to make a global change like this to an existing file, I think the easiest way is to use the Layout Adjustment feature which has been deprecated in favor of Liquid Layout, and is now hidden away in the Liquid Layout panel flyout menu.
In order for it to work, two things must be true BEFORE you make changes to the file: Layout Adjustment must be turned on, and the text frames must be fully snapped to the existing margin guides, so you may have to adjust the margins BEFORE you make other changes so they surround the frmaes with no gaps.
Once margins are correct and Layout Adjustment is enabled, you can change the page size in Document Setup, then go to your master page and from the Layout menu choose Margins and Columns and reset the margins to whatever you like. The change should be reflected in all pages to which that master is applied, and your frames snapped to the old margins should change size/shape to remain snapped to the new ones.

Cannot change font, size or anything for typewriter tool

Hello all,
I am having an issue with the typewriter tool. I cannot seem to change my font on about 95% of my PDFs? Every once in awhile I am able to change the font and size. But I cannot find a consistancy and cannot figure out the issue? When I want to write on the PDFs to change size or font, it won't allow me to. Any ideas?
Thanks,
Lorne

I believe I have good news for all who have this trouble. It's been annoying since day one.
I accidentally discovered that by setting your cursor just off the edges of the document and begin your typing, the font properties always remain easily available!
Once you have created a typed message (any number of characters is okay), you can then drag the filled-in Typewriter Text Box to any location on the document; and you can continue to edit, at will!
Using the Typewriter Tool, I've had less than 05% font selection success when I type directly on/in the document.
Using the Typewriter Tool, I've had 100% font selection success by starting my typing in this space just off the document surface. Once finished typing, I just drag the box to the document surface. I hope this works for you, too!
See image. To enlage this image, press your Ctrl key and scroll. Good luck!

Can't change image size % in save for web

Hello,
I'm using Photoshop CC. When slicing a web mockup, and saving for web, the image percent is blocked at 58.49% and I am not able to increase it to 100%. So my original image of 1024px wide comes out at 600px
I haven't changed any settings (that I know of) and do not have this problem on any other mockup files I have. What setting do I need to adjust in order to save for web my slices at 100%?
Thanks!

I worked out what the issue was, my document height was over 8000px tall which is causing the issue, even though my slices are less than 2000px tall. When I temporarily crop the document to below 7000px, I can save out the slices at 100%. Annoying work around.
It seems a bit random.

How do I change the size of images for a collage?

I am trying to create a collage in Photoshop CS4. I have found info on this and know that I need to create the background layer and then drag the images I want onto the background layer, then free transform the images to make them the sizes that I want. However, when I do this the image becomes distorted. Is there some way to make the images smaller and still retain the integrity of the image? As it works now the people in my images are getting stretched out one direction or another. Any information, or direction to information would be greatly appreciated!! Thanks!

I'm not the most experienced yet, so there may be an easier way. But, first, the images and the background should be the same resolution...which you can check/change by going to Image-->Image Size. Then after dragging to your background use the free transform from the corner, while holding down the shift key. This will keep it proportional.

Changing frame size in avi

I'm editing a number of clips (different sizes) and I to save all of them in the same size. When importing I could only convert all their sizes to the projects size (which I couldn't change). When exporting, the feature enabling saving in a different size was disabled.
I used the scaling option, but then the movies are saved in the same size, only with a black background. Is there any way to actually set the movies to the size I want?
The clips are AVIs (could it be a codec issue?)
The operating system is windows XP
I'm using Adobe Premiere CS3
If it is not possible to save the movie with smaller dimensions - is there at least a way to determine the background color?
Thanks,
Aya

Thanks! The GSpot looks like a good program to have
The codec is MP42 (S-Mpeg 4 version 2)
And the initial settings are the default ones - DV-PAL 48kHz
What I would really like to do is to crop (and resize) the videos, then save them all in the same size (smaller than the default 720x576), without a black background. Is it possible?
Thanks!

Resize of picture changes frame size

Hi,
I put an 8 point stroke around my photos and if I resize by using command option shift while draging the corner the stroke changes too.
This is a new behavior for me and I am not sure of the terms to use to look it up in help. How do I resize without changing the stroke weight?
Thanks,
Garrett

Where specifically in the upper control panel?
I'm assuming you mean the lower of the two upper control panels?
So, in the upper control panel there is a button that says "?" click that exact particular button and the window that says Stroke Styles will open.
Alternatively, please tell me what terms to use to look up "Stroke Styles" in help.
Thanks,
Garrett

JFrame content displayed only after changing frame size

Hello everybody,
could someone explain to me why the content in this frame:
public class PHPTableReport extends JFrame {
     public PHPTableReport() {
          getContentPane().setLayout(null);
          final JLabel newAppletLabel = new JLabel();
          newFrameLabel.setBorder(new BevelBorder(BevelBorder.LOWERED));
          newFrameLabel.setBackground(Color.BLUE);
          newFrameLabel.setText("New Frame");
          newFrameLabel.setBounds(10, 10, 50, 58);
          getContentPane().add(newAppletLabel);
     }when invoked like this (in a JApplet):
PHPTableReport pHPTFrame = new PHPTableReport();
pHPTFrame.setVisible (true);
pHPTFrame.setBounds(300, 300, 800, 600);only displays after dragging the window/frame bigger or smaller?
Thanks in advance again
Jan

Change this :
pHPTFrame.setVisible (true);
pHPTFrame.setBounds(300, 300, 800, 600);To:
pHPTFrame.setBounds(300, 300, 800, 600);
pHPTFrame.setVisible (true);

Changing Frame Size in MPEG_Streamclip for FC

Similar Messages

Maybe you are looking for