Changing from 3 columns to 1 column in iWeb causes program to shut down.

Changing from 3 columns to 1 column in iWeb causes program to shut itself down. Is there a fix or a way around this? Using OS 10.7.2 on a MacBook Air.

To anyone else who has had this problem, the only work around I've found is to duplicate older web pages or sites on iWeb that have one column. I then only had to change the words and pictures. It was a bit more work, but a lot less than the frustration of learning a new program on the fly.

Similar Messages

I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down and dont work anymo

I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down by itself and dont work anymore. From apple say even a year has not passed it is not under garancy and I should pay to fix it without ans issue.

I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down by itself and dont work anymore. From apple say even a year has not passed it is not under garancy and I should pay to fix it without ans issue.

After updating my software from snow leapord to mountain lion my MacBook Pro suddenly keeps shutting down without any reason no warning suddenly just restarts... Can someone help

After updating my software from snow leapord to mountain lion my MacBook Pro suddenly keeps shutting down without any reason no warning suddenly just restarts... Can someone hel

Note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.

Form 16A changed from 6 columns to 11 columns

Hi all
i was using program J_1IEWT_CERT for form 16A it was having 6 columns in it now there are changes in the form 16 A there are 11 columns, is there any program for it or suggest me what r the required changes to be done in previous program.
Thanks

changes will comes with Master Notes and Support packages ? so search in service.sap.com.
<b>u cannt copy and paste the Porgram , Withhold taxes data should come from SAP itself.
tell me whats ur Support Pachage Level ? ask ur basis for the same.</b>
i think Govn.of. india released new Format in the fiscal year 2006-07, so i think SAP come with standard solutions?
Regards
prabhu

Blank page showing when changing from two column to one column pages

This is the scenario:
Document with two master pages - Page1 has two content areas - left column and right column, Page 2 has one content area the full page width named 'FullPage'
One page set named PageSetOne - with multiple subforms, each with Pagination setting of Following Previous and Continue filling parent.
Second page set named PageSetTwo - this has a single subform with Pagination setting of place on Page2. The child subform has itself a subform with Pagination setting of Place in Content Area 'FullPage'.
     This page set is initially set to be Hidden.
Third page set named PageSetThree - this has a single subform with Pagination setting of place in Page 1 and a child subform with Pagination setting of Following Previous.
[Obviously I am simplifying names and content here].
The problem is this: when in design mode, there is a blank page showing at the end of the document whenever there are sufficient subforms in PageSetOne such that subforms are displayed in the right hand column.
When subforms are removed so that nothing is showing in the right hand column then the blank page goes away.
I have put a marker subform immediately after the last subform in PageSetThree and can see that the blank page is showing after this.
Also, the following problem:
     When in preview mode, the extra blank page at the end does not display (which is good)
     BUT if the hidden PageSetTwo is made to be visible AND there is content showing in the right hand column prior to it,
     THEN a blank page is displayed just before the newly displayed PageSetTwo page (a single column page on Master page Page2).
I have tried every combination of Pagination Place before and after settings and can find no way to avoid the blank pages.
Does anyone have a clue as to what is going on and how I can avoid these blanks showing up?

I have finally managed to solve this problem.
The issue was not a subform extending too far out, it was a pagination setting, as Niall suggested.
I created a blank document to analyse the issue closely, and lo, my new blank doc with all default settings, worked perfectly.
So I revisited my forms and compared the pagination settings subform by subform.
This is what I had to change to ensure that all pages flowed with no extras:
PageSetOne (which is supposed to show using the two column master)
set the top page Place = ‘In Content Area Leftcolumn’ and After=Continue filling parent
All child subforms each with Pagination setting of Following Previous and Continue filling parent.
PageSetTwo (to show in the full page column Master)
set the top page Place = ‘In Content Area FullPage’ and After=Continue filling parent
All child subforms each with Pagination setting of Following Previous and Continue filling parent.
PageSetThree ( back to two column master)
set the top page Place = ‘On Page1’ and After=Continue filling parent
All child subforms each with Pagination setting of Following Previous and Continue filling parent.
I discovered that the critical setting was for PageSetOne. The After setting needed to be Continue filling Parent
Once I had those settings in order then the form performed as required.
This has been a frustrating learning experience but at least ultimately successful.
AJ

I am trying to download pictures from my camera to Iphoto and all of a suddent it shuts down after showing a few of the pictures from the camera. This never happened before

Any ideas

There are 9 different versions of iPhoto and they run on eight different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.

I have a new iPad 4 from Christmas and suddenly the sound stops. I have to shut down the iPad to restore it. Has anyone else had this problem?

I am interested in knowing if anyone else has had a sound problem with a news ipad4. In the last two days, my IPad sound has just stopped. I can get it back by doing a complete shutdown of the iPad. I will be returning it to the store since I am certain this should not happen. Just wondered if this is a common problem. Thanks!

Is it formatted Mac OS Extended (journaled)? If not do so using Disk Utility.
P.S. If you store live fies on an external disk you need to back it up just like data on your internal disk or if and when that disk crashed then, poof, all your music will be gone.
If you do not already have one, purchase an external drive to dedicate to Time Machine backups. Then in the Time Machine exclusions list, remove the image of the music offload disk. Then both your internal and external live drives will be backed up to the Time Machine disk.

HT5622 I forgot my ID and password and asked and received new ones. Now my applepro is not willing to shut down for a restart as it does not want me to loose data because of unsaved changes. I cannot use my new ID and password to force shut down. How to p

My question is about starting again of the Macbook Pro.

You need to use the Apple ID originally used to setup your Mac.
Apple ID: How to find your Apple ID
If that doesn't help, contact Apple > Contacting Apple for support and service

How do I prevent windows from shutting down ITUNES with a Data Protection Execution error when trying to sync with my Iphone 4S in a 32 bit windows environment?

I first was not able to install ITunes 10.5. Apple upgrade installer caused a data protection execution error and windows reverted the process back to the original software. I then removed ITunes through the control panel ap. I removed Bonjour and quicktime. I could not use the windows uninstaller to remove the apple upgrade installer and had to find a fix it program on the microsoft web site to fully remove this program. After doing this, I was able to load and install itunes 10.5. However, now when I try to sync my new 4S phone, the sync only goes to the 2nd or 3rd step before eliciting a DPE error and causing itunes to shut down. I tried making a new user profile. Opened I tunes in the new profile and began to search for music on my computer. The program again elicited a DPE error. I looked to see if quicken was still on the computer and maybe causing a hangup, but it is no longer installed. Ok, I am at wits end and have spent much too much time on this issue. Please help.

I was able to finally stop ITunes from crashing after many days of searching n restarting my computer many times.
a) First I went to this site ->http://forums.techarena.in/guides-tutorials/1119812.htm that showed me how to disable DPE. Please make sure that u have good virus...etc.. protection first before doing this. I have Avast Internet Security. RESTART UR COMPUTER..
b) I then uninstall ITunes by following this site ->http://support.apple.com/kb/ht1923 RESTART UR COMPUTER..
c) I then downloaded a beta version of ITunes. I happen to download beta 7 before the final of 10.5 version came out. Installed it. After installing I click on it n it said somewhere along the line of "this ITune ver. expired" I checked in my Programs n Features n notice that QuickTime was installed w that beta version.
d) Go online n download the final version of ITunes ->http://www.apple.com/itunes/download/ ...... After u finish dling install that. After that's done connect your IPod, IPhone...etc... n click on ITunes, it should sync all the way.
I was finally able to sync all thru the steps insteading of it crashing on me midway. Hopefully this will work for you. Good luck !
IPhone4, Gateway Windows Vista 32bit

IMac shuts down when trying to upgrade from Tiger to Leopard

My iMac, purchased in November of '07, came installed with Tiger but also came with a Leopard OS update disk. When trying to upgrade to Leopard last week, every time I rebooted off the disk the computer would run for a minute in the gray screen and then suddenly shut off with no warning message. I checked HD in disk utilities, repaired my permissions and tried again with the same results. I've got 30 gigs of free space and 4 gigs of RAM which should be plenty. I talked to Apple support who walked me through the installation procedure with the same results and ended up shipping me a new install disk which came today. I am getting the same shut down on reboot with their replacement disk. Apple actually sent me two white disks. The first is labeled "For Mac Computers, Mac OSX Install disc 1" The second is labeled "MacBook, Mac OSX Install Disc 2" Since the second disc is label "MacBook" is it possible they sent me the wrong set of discs?
Thanks

rk87,
Thanks for replying. I have a 500 gig hard drive which yields a 465gig usable capacity, so, at 30 Gigs available, I don't have 10% of the drive free. This may be an issue, but my more immediate problem is that I can't get the install disk to boot up at all.
I called apple support again see what I could find out about the install disks which wouldn't work. The support guy seemed like he had a lot of knowledge about the system and suggested trying the Tiger install disk (that came with the machine) to see if it would boot up, which it did. After that success, I tried the Leopard update disk in another iMac I have at home and it worked as it should. Since the disk worked fine on the other mac, the guy at tech support speculated that there is some sort of hardware issue causing the install shut down on the computer in question.
His speculation was about the memory installed in the machine which might be the issue. I had bought the computer from an Apple Authorized store here in town who upgraded the RAM to 4GIGs using third-party memory. Even though the memory seems to have functioned properly for the past year, apple support says that there could be some sort of incompatibility with the third party product causing the install disk not to work.
Apple support told me about running a memory diagnostic off of the Tiger install disk by rebooting with the disk in the computer and hold down the "D" key. After I got off the phone I ran the test which turned out to take an hour in its long version. The test indicated no problems, but apple had told me that it might not be totally conclusive. At this point, I'm taking the computer back to the store where I bought it and will let them figure it out.

Shut down Windows 8.1 embedded from within an app

I am developing a windows 8.1 app with microsoft visual studio. The app shall run in an embedded box PC. From within this app I want to be able to completely shut down the computer. Is there some simple way of simulating or acessing windows/shut down function
inside my app? If so, how could I write this in visual studio?

This forum is for Windows POSReady. You might want to try the Mobile Development forum:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=windowsmobiledev
Sean Liming - Book Author: Starter Guide SIM (WEI), Pro Guide to WE8S & WES 7, Pro Guide to POS for .NET - www.annabooks.com / www.seanliming.com

Elements 13 continually get message"Elements 13 organizer has stoppped working" then program shuts down. Have re-booted computer ....Uninsatalled program and reinstalled from disc ..nothing works

just purchased elements 13 ..... Get message "elements 13 organizer has stopped working ..... Program then shuts down Re booted computer .... Uninstalled program and reinstalled from disc ... nothing works

Please try out the instructions mentioned in RESET PREFERENCES and RESET SAVED PREFERENCES sections of article:
https://helpx.adobe.com/elements-organizer/kb/organizer-crashes-launch-does-not-start.html
Thanks,
Anwesha

IPhoto shuts down over-and-over when importing from iPhone

When trying to import photos from iPhone to iPhoto, iPhoto begins the import but then immediately shuts down. over and over again. I've looked online for a solution but have not found anything that I have tried. I am not very comfortable with technology so hesitate to try anything without some direction.
iPhoto 7.1.5
Max OS X version 10.7.4
Error Report:
Process:         iPhoto [10596]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         7.1.5 (7.1.5)
Build Info:      iPhotoProject-3780000~2
Code Type:       X86 (Native)
Parent Process: launchd [132]
Date/Time:       2012-07-31 11:01:54.073 -0700
OS Version:      Mac OS X 10.7.4 (11E53)
Report Version: 9
Interval Since Last Report:          677058 sec
Crashes Since Last Report:           11
Per-App Interval Since Last Report: 584991 sec
Per-App Crashes Since Last Report:   10
Anonymous UUID:                      92C8D8A3-29DF-40C3-8BCD-DD0608B6198D
Crashed Thread: 7
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000020
VM Regions Near 0x20:
--> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL /Applications/iPhoto.app/Contents/MacOS/iPhoto
    __TEXT                 0000000000001000-00000000006b2000 [ 6852K] r-x/rwx SM=COW /Applications/iPhoto.app/Contents/MacOS/iPhoto
Application Specific Information:
objc[10596]: garbage collection is OFF
Thread 0:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib                  0x98114c22 mach_msg_trap + 10
1   libsystem_kernel.dylib                  0x981141f6 mach_msg + 70
2   com.apple.CoreFoundation                0x973869da __CFRunLoopServiceMachPort + 170
3   com.apple.CoreFoundation                0x9738fb04 __CFRunLoopRun + 1428
4   com.apple.CoreFoundation                0x9738f1dc CFRunLoopRunSpecific + 332
5   com.apple.CoreFoundation                0x9738f088 CFRunLoopRunInMode + 120
6   com.apple.HIToolbox                     0x98810723 RunCurrentEventLoopInMode + 318
7   com.apple.HIToolbox                     0x98817a8b ReceiveNextEventCommon + 381
8   com.apple.HIToolbox                     0x988178fa BlockUntilNextEventMatchingListInMode + 88
9   com.apple.AppKit                        0x9a4780d8 _DPSNextEvent + 678
10 com.apple.AppKit                        0x9a477942 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 113
11 com.apple.AppKit                        0x9a473cb1 -[NSApplication run] + 911
12 com.apple.AppKit                        0x9a704bd9 NSApplicationMain + 1054
13 com.apple.iPhoto                        0x00002ce6 0x1000 + 7398
14 com.apple.iPhoto                        0x00002c0d 0x1000 + 7181
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib                  0x98116b5e __select_nocancel + 10
1   libdispatch.dylib                       0x90f80cc9 _dispatch_mgr_invoke + 642
2   libdispatch.dylib                       0x90f7f85f _dispatch_mgr_thread + 53
Thread 2:: com.apple.CFSocket.private
0   libsystem_kernel.dylib                  0x98116b42 __select + 10
1   com.apple.CoreFoundation                0x973dde15 __CFSocketManager + 1557
2   libsystem_c.dylib                       0x97588ed9 _pthread_start + 335
3   libsystem_c.dylib                       0x9758c6de thread_start + 34
Thread 3:
0   libsystem_kernel.dylib                  0x9811683e __psynch_cvwait + 10
1   libsystem_c.dylib                       0x9758ce78 _pthread_cond_wait + 914
2   libsystem_c.dylib                       0x9758cf7b pthread_cond_timedwait_relative_np + 47
3   com.apple.CoreServices.CarbonCore          0x95e903a7 TSWaitOnConditionTimedRelative + 178
4   com.apple.CoreServices.CarbonCore          0x95e9011d TSWaitOnSemaphoreCommon + 490
5   com.apple.CoreServices.CarbonCore          0x95e8ff2e TSWaitOnSemaphoreRelative + 24
6   com.apple.QuickTimeComponents.component          0x91a64516 0x91478000 + 6210838
7   libsystem_c.dylib                       0x97588ed9 _pthread_start + 335
8   libsystem_c.dylib                       0x9758c6de thread_start + 34
Thread 4:
0   libsystem_kernel.dylib                  0x9811702e __workq_kernreturn + 10
1   libsystem_c.dylib                       0x9758accf _pthread_wqthread + 773
2   libsystem_c.dylib                       0x9758c6fe start_wqthread + 30
Thread 5:
0   libsystem_kernel.dylib                  0x9811702e __workq_kernreturn + 10
1   libsystem_c.dylib                       0x9758accf _pthread_wqthread + 773
2   libsystem_c.dylib                       0x9758c6fe start_wqthread + 30
Thread 6:
0   libsystem_kernel.dylib                  0x9811702e __workq_kernreturn + 10
1   libsystem_c.dylib                       0x9758accf _pthread_wqthread + 773
2   libsystem_c.dylib                       0x9758c6fe start_wqthread + 30
Thread 7 Crashed:
0   com.apple.ImageIO.framework             0x9a3f5fdb _JPEGFile::writeToStream(__CFWriteStream*) + 151
1   com.apple.ImageIO.framework             0x9a3f7ed9 _JPEGWriter::writePropertiesAndData(__CFWriteStream*) + 99
2   com.apple.ImageIO.framework             0x9a3f7f4f _JPEGWriter::writeToPath(__CFString const*) + 109
3   com.apple.ImageIO.framework             0x9a3f9c5b CGImageCopyFileWithParameters + 2588
4   com.apple.iPhoto                        0x001a0c02 0x1000 + 1702914
5   com.apple.iPhoto                        0x00103555 0x1000 + 1058133
6   com.apple.iPhoto                        0x0029cbc4 0x1000 + 2735044
7   libsystem_c.dylib                       0x97588ed9 _pthread_start + 335
8   libsystem_c.dylib                       0x9758c6de thread_start + 34
Thread 8:
Thread 9:
0   libsystem_kernel.dylib                  0x9811683e __psynch_cvwait + 10
1   libsystem_c.dylib                       0x9758ce78 _pthread_cond_wait + 914
2   libsystem_c.dylib                       0x9758cf7b pthread_cond_timedwait_relative_np + 47
3   com.apple.CoreServices.CarbonCore          0x95e903a7 TSWaitOnConditionTimedRelative + 178
4   com.apple.CoreServices.CarbonCore          0x95e9011d TSWaitOnSemaphoreCommon + 490
5   com.apple.CoreServices.CarbonCore          0x95e8ff2e TSWaitOnSemaphoreRelative + 24
6   com.apple.CoreServices.CarbonCore          0x95ec2e53 AIOFileThread(void*) + 1019
7   libsystem_c.dylib                       0x97588ed9 _pthread_start + 335
8   libsystem_c.dylib                       0x9758c6de thread_start + 34
Thread 7 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x21ce05f0 ecx: 0x12ddf250 edx: 0x0052c600
edi: 0x12df52e0 esi: 0x00000001 ebp: 0xb041f8b8 esp: 0xb041f890
   ss: 0x00000023 efl: 0x00010293 eip: 0x9a3f5fdb   cs: 0x0000001b
   ds: 0x00000023   es: 0x00000023   fs: 0x00000023   gs: 0x0000000f
cr2: 0x00000020
Logical CPU: 0

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Boot Problem! Slow start up, shut down and wake from sleep mode.

I have a MBP late 2009. I used it a long time whit Snow Leopard, few month ago i did an upgrade to Mavericks.
To start up it takes 30-40 seconds until appear the apple logo. Then 2 minutes more to start up the sistem.
When I wake the machine from sleep mode it takes 40 seconds to be working.
Shut down 40 seconds.
Even sometime it get frezze using only Safari.
Things I have tried:
Reinstall Snow Leopard (clean install)
Install Mavericks (clean install)
Replace the HD
¿Any idea?
Sorry for mi poor English

Chepoka,
have you ensured that all of your installed software is compatible with Mavericks?
If you boot into Safe mode, does it still take 40 seconds to awaken from sleeping, or to shut down? (It will take longer to start up in Safe mode because it will perform “sanity checks” on your boot disk.)
If you have a bootable external disk with Mavericks installed, use Startup Manager to boot from the external disk. Does it take just as long to boot, awaken from sleep, and shut down from the external disk as it does from the internal disk?

How do i change the number of columns within a text box? I need to go from three columns to one.

How do I change the number of columns within a text box? I need to go from 3 columns to 1. The insert column is highlighted and column break does not work for this.

Pages '09 does not seem to allow layout breaks in Textboxes.
Pages 5.2 has the same limitation.
Use multiple linked Textboxes in Pages '09 to get the layout you want or create your layout in a Word Processing template in the document layer.
Peter

Changing from 3 columns to 1 column in iWeb causes program to shut down.

Similar Messages

Maybe you are looking for