Changing from DWmx on xp to DWcs5 on Windows 7

I've just jumped from servicing sites built with DWMX to building future sites with DWcs5 on Windows 7. Does anyone know if it's possible to import the old working sites into CS5 on Windows 7?

The operating system or the different versions of DW have no effect on the files.

Similar Messages

W520 active partition changed from lenovo 100MB internal to C: with Windows. Can't boot windows.

Hello!
I moved active system partition in diskmgmt.msc from lenovo 100MB internal partition (actually I'm not sure with the default size of the partition it migth be 1000MB or so I just remember visually digits, but I quess the partition is 100MB) to my C: partition. In result I can not boot up my system. All I can do after turning on notebook is to enter the bios.
I didn't remove lenovo partition I just clicked RMB on my C: partition in diskmgmt.msc and made it active. After reboot I can not load windows any longer.
How can I restore lenovo partition to be active?
Got Windows 7 64 bit.
Thanks in advance for any ideas
Kindest Pawel
P.S. I'am writing on Lenovo T400 which doesn't contain that lenovo internal partition, so I'm even more confused what is the purpose of it, maybe for security reasons or so...
Solved!
Go to Solution.

The "active" partition is where Boot Manager lives. The BIOS goes to the "active" partition to start the boot process, i.e. to launch Boot Manager which may utilize a boot manager menu to select which OS you want to boot to, if you have more than one bootable OS installed in multiple partitions. The boot manager menu also resides in this "active" partition.
If you install Windows7 from scratch on an empty drive, by default it will create a 100MB "system reserved" partition (i.e. the "active" partition, and which does NOT get a drive letter assigned to it when Windows comes up), along with a second large system partition for Windows itself (i.e. what you see as C). The entire rest of the drive is allocated to C by default, if you don't make any changes at cold install time.
So although it's possible to relocate Boot Manager and the boot manager menu into that large C partition (corresponding to changing that partition to be "active" and also de-activating the small "system reserved" partition which is no longer going to be used to begin the boot process), that is NOT the way the Windows installer builds things. And it's NOT the way Lenovo delivers the factory setup.
The Lenovo "system_reserved" partition from Lenovo is actually about 1.4GB rather than the usual 100MB. In it Lenovo places other utilities which get utilized during the system recovery process (which also uses the third partition Lenovo puts on the drive, i.e. the "recovery" partition). This is what allows you to truly recreate the factory-provided original hard drive steup if you need to or want to.
Anyway, it is possible to relocate the Boot Manager files into the C-partition if you had a true retail Windows 7 installation DVD. You could run "system repair" (rather than "install") three times in succession, and this would accomplish the deed. There are also utilities like EasyBCD which can relocate Boot Manager into the C-partition. Both of these processes would then allow you to delete the original "system reserved" partition (either the small 100MB one from MS, or the 1.4GB one from Lenovo... realizing of course that you would then lose the ability to use the "recovery partition" to restore Lenovo factory setup).
Also, if you install Windows 7 as a second bootable OS on a drive where WinXP was already installed, the Win7 installer would NOT create a "system reserved" (active) partition, as the existing WinXP partition is already marked as "active" and is where the current Boot Manager (from WinXP) lives. The Win7 installer replaces this (in the WinXP system partition itself, which is left untouched as the "active" partition) with the Win7 Boot Manager and menu, and creates a separatte new partition with Win7 in it. So now you have two bootable OS's, and no small "system reserved", and the WinXP partition contains Win7 Boot Manager and 2-OS boot menu, and is the "active" partition where the BIOS goes to start the boot process.
But honestly, there is really no reason to do any of the above with your W520. Just stick with what came from Lenovo. Some partition on the boot drive MUST be marked "active", and that's where Boot Manager and its menu MUST reside. Who cares whether that's in a small separate partition (which doesn't get a letter anyway), or in C? There's really very little to gain from changing this, other than a very small amount of additional hard drive space becoming "usable".

Issue on payroll area which is changing from biweekly to monthly in Mid of

Dear Experts,
I have an issue on payroll area which is changing from biweekly to monthly in Mid of the Month.
One employee was retired on 29th of March, so his payroll area was changed from biweekly to monthly on 29th. For retire we are running the payroll on 8th of every month. When we are running payroll for April he has received only 29th and 30th retire salary, by the time he is not yet retired also.
In this case the main problem is monthly payroll time is early then biweekly. so the employee is getting retire salary then his regular pay.
Can you guide me where we can control that monthly payroll area should not be triggered at this movement.
Thanks
Chandra

You can do that but it is not that easy as it sounds if you have to do that over a period of say 10-20 years...lot of operational work!!
Also say if you load the retiree action one month ahead say on 03/01/2011. And the employee is retiring on 03/29.
Retire payroll is on 04/08
Biweekly is on 04/15
Now you decide to lock the employees after the 1st biweekly check of March...say which was process 14 days before 04/15 would be 04/01. The employee number is locked between 04/01 to 04/15. For 14 days you have locked these employees!!
What happens if there is adjustment pay...you have to manually go and unlock the employee and lock him after the adjustment check.
I will let you decide based on the comfort, SAP effort, Operational effort and system maintenance.

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?
I need to be able to send it to a PC in order to print it.

Hard to say what is happening without examining the file.
If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
Peter
ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version.

TS3899 I changed from an Iphone to a Android. I can't get my email from other Iphones

I changed from an Iphone to a Android. Now I can't recieve emails from other Iphones.

Email should not be a problem, text messages can be but not email if it is set up correctly on your new phone.

I have changed from an iPhone to a Sony but when my wife send a message on her IPhone it still gets sent as a iMessage how do I change the settings

I have changed from an iPhone to a Sony but when my wife send a message it still gets sent as an iMessage how do I change the settings

Hello, Vespa Boy125.
Thank you for visiting Apple Support Communities.
Here are the steps that you will need to process on your line to remove your number from iMessage.
iOS: Deactivating iMessage
http://support.apple.com/kb/ts5185
Cheers,
Jason H.

'CHANGE' event not triggering for BTE 2214 on park/change from FBV1/FBV2

I have designed a workflow template for FI parking. If the parked document is rejected, i need to trigger FIPP 'CHANGE' event for sending workitem to approver when someone changes the parked document. In SWEL event trace, the 'CHANGE' event is not getting raised.
So i implemented a BTE 000002214 and now i am able to raise 'CHANGE' event and capture it in workflow. But this is only working when i park a document using FV50 transaction and later change it.
But when i park a document using FBV1 and then make changes from FBV2, the 'CHANGE' event is not being triggered in SWEL. Should i implement some other BTE like 2218 etc? Can you please help?

Hi Gokul,
You can try handling the SAVE event instead of the CHANGED event.
T-code FBV2 will not allow you to save the document unless you make some changes.
Try implementing BTE 2218 and revert.
Thanks,
Sreekanth

I changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

i changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

In your case you can only restore from a backup that has been created with the same iOS version. An iPhone 4 can only run 7.1.2, and, unless your iPhone 5 did not run the same version, you can't use a newer iOS backup of the 5 on the iPhone 4

Downloads changing from "Downloading" to "waiting to download". Why?

Tonight while downloading a HD movie I was watching a couple episodes of a TV show I have on my ATV. Between episodes I would check my download progress and find that the status had changed from "Downloading" to "waiting to download". Can't you watch videos and download something else at the same time?
I did update a photo library and perform a sync during one of the shows I watched. Does that indefinitely pause a download. The sync took less than one minute.
I'm glad there are a few people here that know everything about the ATV. Very helpful. Thanks, KMA

Have you included an href in the jnlp element ?
are you trying to version the jnlp file too ?
/dietz

Have a 1st generation Apple TV, which is not showing as a device in iTunes. Had no problems with Apple TV until I changed from a Windows PC to an iMac. I have changed my IP address, sub mask address and router address in the Apple TV, Can anyone help?

I have a 1st generation apple TV, which was working perfectly until I changed from a Windows PC to a Imac. The Apple TV will not show in Itunes. I have changed the IP address, sub mask and Router IP address. Since changing I have switched everything of and on again. Can anyone help?

I have a new router and computer. I have just remembered that just before my old PC died on me, I transferred my iTunes library to a hard drive. I can't remember exactly just how I got my library back, but there are definately things in my library now that were in my library on my old PC! Hope this makes sense. What do you mean by same location? Do you mean in the same place in the house?
Another difference I have just thought of was my old router was connected directly to the computer bu I have not been able to do this with Sky as my PC is not near a phone socket! Will this make a difference?

Status keeps changing from invisible to online: why the issue is ignored?

There is a serious issue raised in the parallel thread, which is critical for many people: "Status keeps changing from invisible to online" (initiated on ‎16-11-2014 by b.agne, Mac section). In short, when starting using a device, the Skype status changing from "invisible" to "online" - sometimes just for a moment, though enough for others to notice you. These affects very much any type of devices. I am sure the issue has already led to multiple personal crisises and potentially financial losses due to buseness partnership issues (I came close to that myself, and now use anything but Skype for business). The question is: WHY the issue is completely ignored by Skype, Microsoft and expert comunity? Please post the solution if anybody knows how to fix the issue, or suggest how to make Microsoft to know that it should be fixed. Kind regard...

Hi, I also have the same issue. I change the status to Invisible and a later on it is already as "Online", without having even touched/opened Skype. The only way that I see this may happen is that I have the app installed on the smartphone, but before it never had this issue, but from some month ago it started. Any correction or suggestion to work around this issue? Regards

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
Menu > Format > Import Styles
The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
Peter

Silly question, maybe. I want to change from Verizon DSL to cable, but cable company doesn't supply router. can I use my Airport Extreme as wireless router?

We currently have the following wireless home-network configuration, powered by Verizon DSL.
2 macbook pro’s
1 emachine
HP PhotoSmart 6122 all-in-one printer
Apple TV
Apple Airport Extreme Base Port A 1408
Westell 7500 router
Thinking I’d get wider wireless coverage throughout my 2 bedroom home, I purchased the Airport Extreme. It is connected to the router via its sole usb port. The result was only a tiny increase in speed, and no increase in coverage, so I don’t know why I have it.
We now want to change from DSL to cable, thus ditching Verizon. Our new cable provider supplies the cable box, but no router for wireless networking.
Here are my questions.
Can I use the Airport Extreme (AE) as a wireless router?
If so, how should I hook it up? Should the usb cable go from the AE to the cable box, and all the other devices connect wirelessly?
If not, how should I be using the AE to some advantage? What can I get out of the investment?
Thank you very much for your help! Beatriz

What I wrote has nothing to do with what the cable company charges for their installation. And, usually they will help with the router setup even if you supply your own router. I don't know what they will charge for the modem.
Note that you need to get just a modem. You don't want a modem/router combination. That will make using an AEBS effectively nearly impossible. You will need to ask specifically for just a standalone modem, and that you will supply your own router.

HT201304 It would be tremendously helpful to be able to access, set restrictions, and make changes from the parents device to all devices under the same iTunes account, so that I could make changes to my kids devices without physical access.

Please help!
It would be tremendously helpful to be able to access, set restrictions, and make changes from the parents device, to all devices under the same iTunes account, so that I could make changes to my kids devices without physical access.
I understand that I can set up a different Apple ID for the kids devices, or take physical control of the device and make the changes myself. However, my teenage son is technically savvy enough to have a job in Silicon Valley, as are most young people these days. However, in order to access his devices the current way, I first have to bypass the four digit pass code. This starts a fight of why I need in the device and continues to escalate. The argument that I am the parent will gain access but the fight is simply exhausting, and quite frankly shouldn't have to happen at all. He is not yet an adult, he did not pay for his iPad or iPhone and I, as a parent, should have not only have the right to change options at will, and from anywhere, but look at history or current activity when I feel like it.
I currently have the settings where app and in-app purchases require my password to be put in, and he must come to me to type it in, but I need more control and would like, and should be able to access any of our six devices and make individual changes simply by logging in to my account, with my password.
If I can see all my devices on the "Lost My iPhone" app, this technology should be easy to make happen.
C'mon parents! I have a pretty good kid, given all things that they can get into, but I am not stupid. For everything I see has been done, there is much more I haven't seen. I want my children to be kept safe and be able to know what they are looking at or listening to. We parents are the only ones who know our beliefs and what our kids can handle and when.
Thanks for any support or information that I may be missing in order to fulfill my request.

There are mobile device management solutions that can do this, including in Apple's OS X Server system, but most parents generally find that setting this up is more work than it's worth. If you're interested, though, there are a couple that at least purport to be free (I don't know if there are any hidden "gotchas"):
http://www.unwireddevicelink.com/features/
https://meraki.cisco.com/products/systems-manager
and Apple's system:
http://www.apple.com/osx/server/features/#profile-manager
I don't think any, however, allow you to see current activity or browser history. iOS doesn't expose those to access from MDM solutions, to the best of my knowledge.
Regards.

Changing from Periodic inventory system to SAP

Hi All,
I have an accounting questions regarding company that switching from Periodic Inventory system to SAP's perpetual inventory system.
For company that practices Periodic Inventory System, the method to calculate cost of goods sold = opening stock balances + purchases - closing stock balances. All these is reflected in the P&L statement.
When they switch to SAP, do they need to enter all these figures into SAP for the opening balances?
As SAP will not have opening balance stock, closing stock and purchases accounts, do they have to create these accounts in P&L just to take in the balances?
Does anyone have implemented for company that changing from periodic to perpetual inventory system? How do you take in the opening balances? if possible please give example, thanks in advance.
Regards,
MH

Hi All,
Thanks for the reply. But what is the variance that you guys are talking about? Take example:
Old system:
Opening Stock balance = $ 5,000
+Purchases = $20,000
-Closing Stock balance = $ 9,000
Balance = $16,000
The amount that goes into Asset is Closing Balance $9,000 and the amount goes to P&L as COGS is $ 16,000? The rest for $20,000 and $ 5,000 can be ignore?
Thanks in advance if anyone can answer my question here.
Regards,
MH

Changing from DWmx on xp to DWcs5 on Windows 7

Similar Messages

Maybe you are looking for