Changing from Menu Based to Auto Play

How do I change from menu based to auto play when burning a project to DVD. It used to and some how it changed to menu based, and I wan autoplay. Thanks

Gink
The bottom line is at the end of this whole write up...
Are you expecting to see a button, like in earlier versions, that specifically is labelled AutoPlay?
If so, Premiere Elements 11 and 12 does not have such a button.
Once you hit Reset, that resets back to the no menu stage which represents AutoPlay. In that state, when you click Done, your project has no menus and is classed as AutoPlay.
Are you trying to get navigation of the DVD-VIDEO using the TV Remote and just the Timeline markers with no menus in the project? Or are you content to place your DVD-VIDEO on DVD disc in the DVD player and let it play out to completion without any TV Remote Navigation?
I will stay with you on this until we figure out where we are differing in the discussion exchange.
WAIT - Light bulb may have just lit...
I think that I see where you are coming from on this. Is this it? Given that you have burned your Timeline to DVD-VIDEO as AutoPlay and that you go back into the program and decide to burn another "AutoPlay" DVD-VIDEO. You have long since click Done to the Movie Menu section.
If you click Tools Menu/Movie Menu, you will be faced with menu choice which do not include an AutoPlay one.
So what you can do instead, keep away from Tools Menu/Movie Menu, go directly to Publish+Share/Disc. In that process, you will be greeted by the following pop up
Just click No and proceed with your burn to DVD-VIDEO on DVD disc.
What that it?
Looking forward to your reply.
Thanks.
ATR

Similar Messages

  • Audio selection in Cs5.5 Encore auto plays rather then just changes audio track

    I am an Encore newbie after moving from DVD SP to Encore for blu ray menu authoring. Ive read and re-read the help files and they seem to be the same for Encore versions going back to at least cs3 for this issue ... so i must be doing something wrong or Encore just cannot do a very basic thing...
    I am building a blu-ray with a singel video track and 2 audio tracks. I am trying to link a menu to allow a user to select a 5.1 or 2ch version of audio for a feature film. All shoudl be straightforward. i have a menu with several buttons. Each button links to an audio track in my timeline.
    However, when i test my links, instead of just changing the audio and returning to the menu (as per the instructions in the help files ), the film plays from the beginning.
    The correct audio track is played, but that is not my intention at that point. I want the user to choose the audio track and then allow the user to press another play button or go to another menu and back again before the film starts.
    So how do i just change the audio track but not play it there and then ?
    The help says use 'specify link' so i choose that option and select the timeline, yes, select the audio track 1 or 2, yes. But there is no different way to do this if i actually wanted to play the track at that time as well. What is the fundemental bit i am missing here ? Something to do with button type or some werid overide setting i am missing ? Can Encore actually do this ? its rather frustrating having come from using DVD SP which allows you to script everything and set gprm/sprm registers, to a program that does not seem to allow you to do anything beyond very very basic authoring.
    Any help would be appreciated. thanks.
    mark

    maniac101maniac wrote:
    However, when i test my links, instead of just changing the audio and returning to the menu (as per the instructions in the help files ), the film plays from the beginning.
    The correct audio track is played, but that is not my intention at that point. I want the user to choose the audio track and then allow the user to press another play button or go to another menu and back again before the film starts.
    To return to menu after changing the audio or any subtitle track, you should select the desired menu in the Specify Link option and change the audio and subtitle accordingly.
    In the example above, what I have done is, I went to the Specify Link, chose the menu as the target and also changed the audio track there and clicked OK
    So here, after pressing Button 3 (Item 3), I would return to the menu and my aduio would be reset to audio track 2.
    After that, whatever timeline I play, that would be played with audio track 2.
    That is just a small example to show how it is done. Set the navigation as you like.

  • My lap top wont import pictures from auto play. it keeps saying there is a file error and a device connected to the computer isnt working properly. i have tried going into the internal storage to copy and paste the pictures but this wont work either.

    my pictures from my i phone 4s wont import from auto play. a message keeps coming up saying there is an error and a device is not working properly. also i have tried going into the internal storage to copy and paste them but that wont work either. the page either stops responding or the picture simply dont copy. does any1 have any idea why this is happening. it has never happened before and only seems to be happening since i started using i cloud storage instead of synching my phone with the lap top.

    I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
    Today I discovered a new treasure of doggie poop in Lion. No Save As......
    I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
    So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in  mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
    are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
    I am starting to believe that Apple is Satan.

  • Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up allright, but the programs don't start when I press any buttons. How do I fix this problem?

    Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up alright, but the programs don't start when I press any buttons. How do I fix this problem?

    If Layers is greyed out it possibly means that you are in Quick Mode. Select 'Expert' and all the options should become available.
    Try permanently associating psd files with C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe and see if that fixes the issue. Instructions here - http://windows.microsoft.com/en-gb/windows-8/choose-programs-windows-uses-default.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Auto play dvd without main menu

    greetings,
    what im wanting to do is create a dvd that auto plays with no menu and repeats. i have succeded in the auto start and the loop part but the disc i have created still returns to the main menu if you hit the menu button. i don't want a main menu at all. bare bones is what were lookin for.
    thanks in advance,
    kyle

    thanks for the reply shepp.
    i tried toast but i couldn't find the .mov file in imovie. didn't the older imovie leave you with a .mov?
    here in the future we don't eat meal we take pills.
    here in the future we don't make love, we take pills.
    here in the future we don't have joy, we take pills.
    i miss the past.

  • I just changed the hard drive on my computer and my music and videos that I got from my friend will not play because I don't remember his password.  Any solutions????

    I just changed the hard drive on my computer and my music and videos that I got from my friend will not play because I don't remember his password.  Any solutions????

    If you are talking about your friend's iTunes password, you are not supposed to use or have his password or even his music,etc. in your computer...

  • Return to previous menu from video while it is playing

    DVD SP 3 I want the person playing my project to be able to terminate his viewing of a video and return to the menu from where he has just come, wherever that is depending on where the viewer is.
    Pressing the Return button in the Simulator and also while the (physical) DVD is playing have no effect. The button on the Simulator's remote control is greyed, and while the DVD is playing on a TV a flattened hand symbol appears on the screen. I have tried setting Disc Inspector > General Tab > Remote Control > Return: to "xyz Menu", but no effect, and in any case would not do what I want (please see italics above and below). (I know that nearby in the Disc Inspector I can set the Remote's Menu and Title buttons to go to suitable menus, which helps but ony a very little because the setting is fixed.)
    Many DVDs have several long videos and surely there must be a way of terminating, perhaps after a mistake was made in choosing it, or boredom etc. and allowing the viewer to retun to his last menu which will sometimes be two or more depths below "xyz Menu" and different from it and indeed different every time, depending on where he is.
    Any ideas please?
    G5/2.0 GHz Mac OS X (10.3.9) 1 GB RAM, 150 GB HD, Sony DCR-HC96 mini DV, FCE HD 3.0 DVD SP 3

    Steve - Drew has already got this covered, I'm sure... the answer is to use a simple set of scripts. The problem facing any author using multiple menus to access the same basic track asset is how to know which menu to go back to.
    On some players, using the menu key will go to the last viewed menu, but not all will work this way - some manufacturers seem to invoke their own practices rather than the spec. guides.
    What you do is really quite easy... every time that you send the viewer to a menu (be it the start up menu or whatever) you first of all send them to a script. In the script you set a value into a GPRM and that way you can keep track of where the user came from.
    For example, your disc starts with a menu... but you set the first play to go to the following script:
    mov GPRM0, 1
    Jump Menu1
    From the main menu you want to go to a features menu - set the button on menu1 to go to the following script:
    mov GPRM0, 2
    Jump Menu2
    As you can see, GPRM0 (the memory space) has a new value in it. If you want to go back to the main menu from the features menu then set the button on menu2 to go to the first script. This will reset the GPRM value back to '1'.
    Now, all you need to do is create a final script which you set to be the menu call and end jump for your track. You do this from the property inspector for the track - use the drop downs for 'Menu' to navigate to your scripts and choose the following script:
    Jump Menu1 If (GPRM0 = 1)
    Jump Menu2 If (GPRM0 = 2)
    Now you have a system in place which will take the user to whatever menu they were last on regardless of anything else. You can expand this system indefinitely to accommodate many more menus, and also build it to send you back to the exact button you were last on as well. It's a flexible system!
    Keep in mind that the menu button on your handset is intended to act as a resume function as well - don't fall into the trap of believing you can move from menu to menu by pressing using that handset button more than once - a second press will take you right back to the track you were last watching.

  • Problems auto-connecting after sleep & startup (Changed from WPA to WEP)

    Okay, I know there have been several issues similar to this, but after two days of sifting through posts, I still can't resolve this.
    A few days ago I switched my AirPort network security from WPA to WEP-128. This was required to allow my Nintendo DS to connect to the netwrok, by the way. After the change, two similar, but slightly different problems started:
    My 15" PowerBook G4 no longer auto-connects to the network at startup. The network is listed in the drop-down, and connects with no problem when I choose it manually. The computer seems to have no problem re-connecting after waking from sleep, which is odd because...
    My other PowerBook, a 12" G4, won't auto-connect at startup AND won't re-connect after sleep. As above, it has no problem connecting using the Keychain once the network is selected from the drop-down.
    So far I have tried, on both machines:
    - trashing the system airport prefs
    - deleting and resetting the network's keychain entry
    - repairing the keychain (no errors found)
    - turning off some unneeded power mgt options
    - disconnecting USB peripherals
    I have also reloaded the software on both my AirPort Extreme base and my AirPort Express hub, as well as restarting both hubs. I've also made sure that AirPort is at the top of the network connection list.
    Both laptops are running 10.4.3 and have all the latest software updates installed.
    What am I missing?
    Thanks.

    Both of these replies are helpful, in that they help confirm something I figured out this morning, almost accidentally.
    One thing I didn't mention was that during the change from WPA to WEP I changed the network password. Now, I assumed that since the Keychain seemed to be working and I could get on the network manually without needing to enter the password each time, that meant the new password had correctly propagated throughout the system.
    So, this morning I go into the Network settings, switch from Automatic to Preferred, select my network, look at the properties, and notice that somehow it has way too many bullets for that to be the correct password. I re-entered the password and that seems to have solved the problem. The new password I had entered somehow didn't make it into this setting. I guess trashing the network prefs, or renaming the network would have had the same effect.

  • How to stop MP3s from auto playing?

    When I download an MP3, it starts auto playing in iTunes once the download finishes.  I called Apple support but as usual, they had no idea.  Any one know how to turn off auto play?  This started once I upgraded to Yosemite.

    G,
    You might try downloading Bluetooth Connect & Stop Play from the playstore.
    I found this on the web and it may help:
    How to Stop Music Autoplay when Connected to Bluetooth in Car
    S.

  • Change COPA from costing based to account based

    dear friends,
    one of our clients is upgrading from 4.6C to ECC 6.00.  as part of this upgrade they want to change the COPA from costing based to account based.
    Whether this can be done?
    If yes, how it can be done and what all precautions need to be take care of?
    If no,  what are the reasons due to which it should not be done?
    thank you for the help.
    bajee prasad

    Hi,
    Let me try to answer to get full points from you. It is a very tricky question.
    You can add Account based COPA in addition to Cost based COPA. It is advisable not to delete Cost Based COPA.
    Go to Tr. Code KEA0. In the Data Structure Tab, click the change button. Now you can tick the Account based type of PA.
    Then go to Environment tab, click the activation button. System will run for some time and both the types of PA gets the environment. These changes are not transportable. You need to do it by opening the system. You can test this in your quality system and then try in Production. I caution that you need to take a backup of the system so as to meet any worst scenario. All the best.
    Cheers,

  • I use itunes to store my music but I use Virtual DJ Broadcaster to play it. Somehow itunes has changed from Itunes Music Library to Itunes library. Virtual DJ does not Recognize the change.

    I use itunes to store my music but I use Virtual DJ Broadcaster to play it. Somehow itunes has changed from Itunes Music Library to Itunes library. Virtual DJ does not Recognize the change. Virtual DJ  at present seeing an older version of my libraries. Is it possible to Save my last library and Playlist and re-name everything else in my itunes account so it will again show "Itunes Music Library" Past libraries are of no consiquence . I'm hoping removing everything except  the last Library on my computers will make Virtual DJ  recognize it. I tried renameing  the Library to "Itunes Music Library" but it did not work. I fear the problem is in the Registry and without the correct path I am reluctand to play around  in there. Any help would be appreciated.

    Incidentally, my first thought was to map a network share from the NAS to my computer, so that my music files appear on the Z: drive, say on my computer. I could then set up iTunes to store music etc in that folder, and to copy all new items to that folder. However, if I do that, all that'll happen is that on my NAS, the library file will become out of date as I add music to the collection but not to the index.

  • Podcast app no longer auto-plays next episode. Is this a setting that I can change?

    After updating to iOS6 and downloading the app update, the the next episode in the "unplayed episode" list no longer auto-plays. I really liked that feature and would like to be able to turn it on again. Any one know if there is a setting and where it is? I've tried to find it to no avail. Thanks!

    Anyone has a solution for this ?
    I like to listen to podcasts in my car. But my favorite podcasts last 4-6 minutes and the iPhone is in the glovebox
    Needless to say I had to stop listening to podcasts since the podcast App took over the music app.

  • How can I disable the Facebook app from auto-playing videos?

    Is there away to disable Video auto playing in Facebook App on iphone 5, os 7?

    They do not let you disable it- but there is a way sort of to turn the annoyance off part time:
    Settings–>Facebook–>Settings–>Auto-play videos on WiFi only
    Doesn't make it less annoying

  • N96 text messaging Problems auto change from sms t...

    N96 text messaging changes from SMS to MMS when delivering to more than so many people how do i stop this
    i create a text and when i select add recipients if i select so many people it changes the text to a MMS if i add a group of people it does the same too. How do i stop this?

    roll on the firm ware updat from what i can see there a hell of alot of bugs. and i dont know how there logic works out with the MMS being cheaper.
    You send a 1 -3 page SMS text to someone it costs 30p (or free if u have free texts) you send 1 MMS it costs roughly 35p.
    ok the text will be reduced to 1 message when changed to MMS but still cost u 35p instead of 0p.
    Also the N96 at 1st is only available on CONTRACT which means people going to have free texts so i the long run its going to cost people more money the way they have it set up plus if you dont know about this feature and send texts that it changes to mms (WITHOUT IT ALLERTING YOU) it costing people money they got some kind of commision going with the service providers?
    a simple feature would of been to have it so it goes to change it and comes up with a message and the option to keep the same or convert but that would be too simple wouldnt it lol.
    Dont you just love big companies ways of thinking (they dont!!!)

  • How do I turn off the auto-play on the web browser? I'm tired of my computer slowing down because your browser is trying to load some kind of advertisment. I do

    My screens are consistently slow loading because the auto-play is always trying to load some advertisment. If I wish to look at the ad, I'll click on it and open it.

    It's a video? Most video ads probably use the Flash plugin. You could stop sites from using Flash automatically and require them to get your approval. And obviously there's no rush giving approval if it's just for an ad...
    To set "Ask to Activate", open the Add-ons page using either:
    * Command+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click Plugins. Look for "Shockwave Flash" and change "Always Activate" to "Ask to Activate".
    When you visit a site that wants to use the Flash plugin, you should see a notification icon in the address bar and one of the following: a link in a black rectangle in the page or an infobar sliding down between the toolbar area and the page.

Maybe you are looking for