Changing homedirectories from AFP to NFS cures all Office Problems?
Hi all,
well a lot of us do have a lot of problmes using Microsoft Office. New files can't be copied to the server (with unknown error -50), saving files fail because of wired netwrok errors or full disks, duplicating files cause complete file loss (the copy and the oridignal file itself), wordfiles seem to be locked (should i make a copy?) trying to open them, over and over there are Word Work Files and uncountable nummers auf Autorecovery files with zero bytes, Word bothering you to many files are open (with not a single file opend) ...
Well this all seems to be a problem of office combined with homedirectory shared through AFP. A Friend of mine told me, that he has no problems with office. The only difference betwenn his infrastructure and mine is, that he uses NFS for sharing homedirectories.
So i did the Following:
I created a new sharepoint for homedirectories and shared it through NFS. Created a new user, using this sharepoint for his homedirectory. Then i worked with the NFS-User on an AFP-sharepoint (like creating a Word file, doing changes and saving it). Then i worked on the same document with an user thats homedirectory is shared through AFP. Everytime i did a change to the document and saved it, a new Word Work File was created next to the original file. After several iterations with the AFP-user there error that the document is allready opend came up...
So my first findings comparing NFS users with AFP users is, that the problems using Office are completely gone when using NFS for homedirectories.
Now the questions for me are:
1.) is anybody there that can approve my findings?
2.) are there any reasons not to use NFS for homedirectories?
3.) which protocol do you use for sharing homedirectories?
4.) what would be the smartest way to change / move APF shared homedirecties to NFS?
I allready did the following to change an AFP shared homedirectory to NFS:
- Set the users home dir from /Users/ to none (in Workgroup Manager)
- as root via terminal mv /Users/myuser /NFSUsers/
- in Workgroupmanager set the useres homedir from none to /NFSUsers/
This worked well (for a short look on it). The only problem was, that the subfolders in the sidebar of the Finder window did not work, and had to be reseted.
Any other suggestions?
Greetings
MacSEK
Hello,
Today a friend reported this problem to me. This problem was only to Word, to Excel no.
In my case the guilty was the add-in PDFCOMPLETE in WORD 2013.
I saw it in programs list on Control Panel. It belong to PDF Complete, Inc.
They have a HP computer. When I uninstalled this add-in from programs list the problem solved !
I did that today. Now they are able to change language and also to put tone on Greek vowels.
When I uninstalled the PDFCOMPLETE I saw on uninstallation window the HP icon !
It seems a file related with HP programs created the problem.
Similar Messages
-
Itunes sent email that said I had to change username from aol account. I have logged out, logged in again and no cue to change this pops up. I have attempted 3 different times to get help and each time, someone tells me to do the SAME EXACT THING THAT I HAVE DONE 20 TIMES AND HAD NO EFFECT. The only thing that itunes allows me to do is change my password NOT MY USERNAME.
Details of the upgrade process are at Convert your AOL Username to an Apple ID, however you only need to make this change if your AppleID is based on an AOL screen name rather than an email address that ends in say @aol.com or @aol.co.uk.
The fact the you've tried signing out and in again without being promoted suggests your Apple ID is based on your email address and therefore nothing needs to be done.
tt2 -
Plz change code from inner join to for all entries
REPORT : ZSD00009 *
DESCRIPTION : REPORT FOR TRACTOR ON STOCK AGING *
CODED BY : DINESH AGARWAL *
SPECS BY : AJAY KOTHI *
START DATE : 07TH JUNE , 2000 *
CHANGED : MANOJ SINGH 01/02/2001 *
CHANGED : YOGINDER KAURA 27TH JULY 2001 *
REPORT ZMUSA_SD00009 .
TABLES : vbrk,vbrp,vbfa,ser01,objk,knvv,mara,mbew, t005u,
t171t,kna1,equi,ihpa, cabn, ausp.
DATA : BEGIN OF itab OCCURS 0,
bzirk1 LIKE vbrk-bzirk,
bzirk LIKE KNA1-regio, "added by dhiraj - 23.11.2007
LAND1 LIKE KNA1-LAND1,
kunde LIKE equi-kunde,
vbeln LIKE vbrk-vbeln,
fkdat LIKE vbrk-fkdat,
matkl LIKE mara-matkl,
sernr LIKE objk-sernr,
equnr LIKE objk-equnr ,
matnr LIKE vbrp-matnr,
spart LIKE vbrp-spart,
vbelv LIKE vbrp-vbelv,
posnv LIKE vbrp-posnv,
days1(1) TYPE n ,
days2(1) TYPE n ,
days3(1) TYPE n ,
days4(1) TYPE n ,
days5(1) TYPE n ,
werks like vbrp-werks,
END OF itab.
DATA : BEGIN OF itab_grp OCCURS 0,
werks like vbrp-werks,
matkl LIKE mara-matkl,
bzirk1 LIKE vbrk-bzirk,
bzirk LIKE KNA1-regio, "added by dhiraj - 23.11.2007
kunde LIKE equi-kunde,
vbeln LIKE vbrk-vbeln,
fkdat LIKE vbrk-fkdat,
sernr LIKE objk-sernr,
equnr LIKE objk-equnr ,
matnr LIKE vbrp-matnr,
spart LIKE vbrp-spart,
vbelv LIKE vbrp-vbelv,
posnv LIKE vbrp-posnv,
days1(1) TYPE n ,
days2(1) TYPE n ,
days3(1) TYPE n ,
days4(1) TYPE n ,
days5(1) TYPE n ,
END OF itab_grp.
DATA : BEGIN OF dealer ,
days1(3) TYPE p ,
days2(3) TYPE p ,
days3(3) TYPE p ,
days4(3) TYPE p ,
days5(3) TYPE p ,
END OF dealer .
DATA : state LIKE dealer .
DATA : matgr LIKE dealer .
DATA : plant LIKE dealer .
DATA : BEGIN OF us,
days1(4) TYPE p ,
days2(4) TYPE p ,
days3(4) TYPE p ,
days4(4) TYPE p ,
days5(4) TYPE p ,
END OF us .
DATA : lin TYPE i , check_box(1) ,
dealer_total TYPE i,state_total TYPE i,
matgr_total TYPE i,plant_total TYPE i,
us_total TYPE i .
DATA vobjnr(22) .
DATA no_of_days TYPE i .
DATA flag_fkdat.
DATA atinn1 LIKE cabn-atinn.
DATA atinn LIKE cabn-atinn.
DATA : atflv LIKE ausp-atflv.
DATA : atflv1(8) TYPE n.
DATA : invdate TYPE sy-datum.
DATA invoicenum(10) TYPE n .
DATA : BEGIN OF it_regio OCCURS 0,
regio LIKE kna1-regio,
END OF it_regio.
data : it001w like table of t001w with header line.
TABLES vbpa.
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : werks FOR vbrp-werks,
vkorg FOR vbrk-vkorg,
vtweg FOR vbrk-vtweg,
spart FOR vbrp-spart.
SELECTION-SCREEN END OF BLOCK block1 .
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME TITLE text-002.
SELECT-OPTIONS : matkl FOR mara-matkl,
bzirk FOR vbrk-regio," changed by dhiraj - 23.11.2007
kunrg FOR vbrk-kunrg ,
fkdat FOR vbrk-fkdat.
SELECTION-SCREEN END OF BLOCK block2 .
SELECTION-SCREEN BEGIN OF BLOCK block3 WITH FRAME TITLE text-003.
PARAMETERS : days1(2) TYPE p OBLIGATORY DEFAULT '90' ,
days2(2) TYPE p OBLIGATORY DEFAULT '90',
days3(2) TYPE p OBLIGATORY DEFAULT '180',
days4(2) TYPE p OBLIGATORY DEFAULT '270',
days5(2) TYPE p OBLIGATORY DEFAULT '365'.
SELECTION-SCREEN END OF BLOCK block3 .
SELECTION-SCREEN BEGIN OF BLOCK reptype WITH FRAME TITLE text-201 .
PARAMETERS : detail RADIOBUTTON GROUP rep ,
summary RADIOBUTTON GROUP rep ,
grp_summ RADIOBUTTON GROUP rep .
SELECTION-SCREEN END OF BLOCK reptype .
*start of code by Kalpana for Authority check for REGIO */
AT SELECTION-SCREEN .
SELECT regio FROM kna1 INTO TABLE it_regio
WHERE regio IN bzirk
AND kunnr IN kunrg.
CLEAR it_regio.
LOOP AT it_regio.
AUTHORITY-CHECK OBJECT 'Z:AO_REGIO'
ID 'REGIO' FIELD it_regio.
IF sy-subrc NE 0.
MESSAGE e173(zma) WITH it_regio.
ENDIF.
ENDLOOP.
*End of code by Kalpana for Authority check for REGIO */
IF days1 NE days2 .
MESSAGE e000(8i) WITH text-004 text-009 text-005.
ELSEIF days3 LE days2 .
MESSAGE e000(8i) WITH text-006 text-010 text-005 .
ELSEIF days4 LE days3 .
MESSAGE e000(8i) WITH text-007 text-010 text-006 .
ELSEIF days5 LE days4 .
MESSAGE e000(8i) WITH text-008 text-010 text-007 .
ENDIF .
START-OF-SELECTION .
select abzirk akunrg avbeln afkdat b~matnr
cmatkl dvbelv dposnv fsernr f~equnr
into corresponding fields of table itab
from ( ( ( ( ( vbrk as a inner join vbrp as b
on avbeln = bvbeln )
inner join mara as c on cmatnr = bmatnr )
inner join vbfa as d on dvbeln = bvbeln
and dposnn = bposnr )
inner join ser01 as e on elief_nr = dvbelv
and eposnr = dposnv )
inner join objk as f on fobknr = eobknr )
where a~vkorg in vkorg
and a~vtweg in vtweg
and a~bzirk in bzirk
and a~fkdat in fkdat
and c~matkl in matkl
and a~kunrg in kunrg
and b~spart in spart
and c~mtart = 'FERT'
and d~vbtyp_n = 'M'
and a~vbtyp = 'M'
and a~fksto = ' '
and b~vgtyp = 'J' .
REFRESH itab.
CLEAR itab .
CLEAR cabn .
select * from t001w into table it001w where werks in werks.
SELECT SINGLE atinn INTO atinn1 FROM cabn
WHERE atnam = 'INVOICEDATE'.
*************************modified by dhiraj - 23.11.2007*****************
SELECT kbzirk aatflv ekunde eequnr esernr ematnr m~matkl
INTO CORRESPONDING FIELDS OF itab
FROM ( ( ( equi AS e INNER JOIN ausp AS a
ON eequnr = aobjek )
INNER JOIN mara AS m ON ematnr = mmatnr )
INNER JOIN knvv AS k ON kkunnr = ekunde
AND kspart = mspart )
WHERE m~mtart = 'FERT'
AND m~spart IN spart
AND m~matkl IN matkl
AND e~kunde <> ' '
AND e~kunde IN kunrg
AND k~bzirk IN bzirk
and a~atinn = atinn1
AND k~vkorg = 'M001'
AND k~vtweg = '90'.
SELECT kbzirk nregio nland1 aatflv ekunde eequnr esernr ematnr m~matkl
INTO CORRESPONDING FIELDS OF itab
FROM ( ( ( ( equi AS e INNER JOIN ausp AS a
ON eequnr = aobjek )
INNER JOIN mara AS m ON ematnr = mmatnr )
INNER JOIN knvv AS k ON kkunnr = ekunde
AND kspart = mspart )
INNER JOIN kna1 as n ON nkunnr = kkunnr )
WHERE m~mtart = 'FERT'
AND m~spart IN spart
AND m~matkl IN matkl
AND e~kunde <> ' '
AND e~kunde IN kunrg
AND nregio IN bzirk "k-bzirk changed to nregio by dhiraj-23.11.2007
and a~atinn = atinn1
AND k~vkorg = 'F041'
AND k~vtweg = '01'.
added by krunal for plant as select-option
clear ausp.
select single * from cabn where atnam = 'DELIVERINGPLANT'.
SELECT SINGLE * FROM ausp
WHERE objek = itab-equnr
AND atinn = CABN-ATINN.
CLEAR CABN.
read table it001w with key werks = ausp-atwrt.
if sy-subrc <> 0.
continue.
else.
itab-werks = ausp-atwrt.
endif.
*end addition
CLEAR : ausp, knvv .
SELECT SINGLE * FROM ausp
WHERE objek = itab-equnr
AND atinn = atinn1 .
MOVE ausp-atflv TO atflv1 .
MOVE atflv1 TO invdate .
MOVE invdate TO itab-fkdat.
CLEAR : cabn, ausp, atinn.
SELECT SINGLE atinn INTO atinn FROM cabn
WHERE atnam = 'INVOICENO' .
SELECT SINGLE * FROM ausp
WHERE objek = itab-equnr
AND atinn = atinn.
MOVE ausp-atflv TO invoicenum .
MOVE invoicenum TO itab-vbeln.
IF NOT fkdat-low IS INITIAL .
IF invdate GE fkdat-low AND invdate LE fkdat-high .
APPEND itab.
ELSE.
CONTINUE.
ENDIF.
ELSE.
APPEND itab.
ENDIF.
ENDSELECT.
SORT itab BY sernr matnr .
DELETE ADJACENT DUPLICATES FROM itab COMPARING sernr matnr .
SORT itab BY equnr .
LOOP AT itab .
CONCATENATE 'IE' itab-equnr INTO vobjnr .
SELECT SINGLE * FROM ihpa WHERE objnr = vobjnr
AND parvw = 'RE'
AND obtyp = 'IEQ'
AND kzloesch EQ space. " Yogi on 27/06/2001
IF sy-subrc EQ 0 .
DELETE itab INDEX sy-tabix .
CONTINUE .
ELSE .
no_of_days = sy-datum - itab-fkdat .
IF no_of_days LE days1 .
itab-days1 = 1 .
ELSEIF no_of_days GT days2 AND no_of_days LE days3.
itab-days2 = 1 .
ELSEIF no_of_days GT days3 AND no_of_days LE days4.
itab-days3 = 1 .
ELSEIF no_of_days GT days4 AND no_of_days LE days5.
itab-days4 = 1 .
ELSEIF no_of_days GT days5 .
itab-days5 = 1 .
ENDIF .
MODIFY itab INDEX sy-tabix .
ENDIF .
ENDLOOP .
END-OF-SELECTION .
DESCRIBE TABLE itab LINES lin .
IF lin GT 0 .
SORT itab BY bzirk kunde vbeln .
IF detail = 'X' .
PERFORM disp_list .
ELSEIF summary = 'X' .
PERFORM summary_list .
ELSEIF grp_summ = 'X' .
PERFORM grp_summ_list .
ENDIF.
ELSE .
MESSAGE i000(8i) WITH 'No Records exist as per Selection Condititon' .
ENDIF .
TOP-OF-PAGE .
WRITE : / text-011 , ' - ' , sy-datum .
*& Form DISP_LIST
text
--> p1 text
<-- p2 text
FORM disp_list.
LOOP AT itab.
********changes made by dhiraj - 23.11.2007********************
AT NEW bzirk.
SKIP .
SELECT SINGLE * FROM t171t WHERE bzirk = itab-bzirk
AND spras = 'E' .
SELECT SINGLE * FROM t005u WHERE spras = sy-langu
AND BLAND = itab-bzirk AND LAND1 = ITAB-LAND1.
PERFORM list_heading.
FORMAT COLOR 4 INTENSIFIED ON.
WRITE :/ 'Sales Region : ',itab-bzirk,30 t005u-BEZEI
,81 ''.
ULINE .
ENDAT.
AT NEW kunde.
SELECT SINGLE * FROM kna1 WHERE kunnr = itab-kunde .
FORMAT COLOR 3 INTENSIFIED ON.
WRITE :/ 'Dealer : ',itab-kunde,30(25) kna1-name1,
60 'City : ' ,kna1-ort01, 81 ''.
ULINE .
ENDAT.
AT NEW fkdat .
FORMAT COLOR OFF INTENSIFIED OFF .
WRITE : /5 itab-vbeln,
20 itab-fkdat .
CLEAR flag_fkdat .
ENDAT .
at new matkl .
format color 2 intensified on.
write :/ 'Material Group : ',itab-matkl, 81 ''.
skip .
endat .
mcnt = mcnt + 1 .
dealer-days1 = dealer-days1 + itab-days1 .
dealer-days2 = dealer-days2 + itab-days2 .
dealer-days3 = dealer-days3 + itab-days3 .
dealer-days4 = dealer-days4 + itab-days4 .
dealer-days5 = dealer-days5 + itab-days5 .
state-days1 = state-days1 + itab-days1 .
state-days2 = state-days2 + itab-days2 .
state-days3 = state-days3 + itab-days3 .
state-days4 = state-days4 + itab-days4 .
state-days5 = state-days5 + itab-days5 .
IF flag_fkdat EQ 'Y' .
NEW-LINE .
ENDIF .
WRITE : 35 itab-matnr, "krunal
55 itab-sernr,
72 itab-werks, "krunal
83 itab-days1 ,
93 itab-days2 ,
103 itab-days3 ,
113 itab-days4 ,
123 itab-days5 .
PERFORM get_musa_ta.
flag_fkdat = 'Y' .
at end of matkl .
skip .
format color 2 intensified on.
write :/ 'Total For : ',itab-matkl, ' - ' , mcnt .
clear mcnt .
uline .
endat .
AT END OF kunde.
dealer_total = dealer-days1 + dealer-days2 + dealer-days3
+ dealer-days4 + dealer-days5 .
FORMAT COLOR 3 INTENSIFIED ON.
WRITE :/ 'Total for : ',itab-kunde,' - ' ,
79 dealer-days1 ,
89 dealer-days2 ,
99 dealer-days3 ,
109 dealer-days4 ,
119 dealer-days5 ,
129 dealer_total .
CLEAR : dealer_total , dealer .
ULINE .
ENDAT.
AT END OF bzirk.
state_total = state-days1 + state-days2 + state-days3
+ state-days4 + state-days5 .
FORMAT COLOR 4 INTENSIFIED ON.
WRITE :/ 'Total for : ',itab-bzirk,' - ' ,
79 state-days1 ,
89 state-days2 ,
99 state-days3 ,
109 state-days4 ,
119 state-days5 ,
129 state_total .
CLEAR : state_total , state .
ULINE.
ENDAT.
ENDLOOP.
ENDFORM. " DISP_LIST
*& Form LIST_HEADING
text
--> p1 text
<-- p2 text
FORM list_heading.
DATA : text1(7) , text2(7) , text3(7) , text4(7) , text5(7),
text11(4) , text12(4) , text13(4) , text14(4) , text15(4) .
text11 = days1 .
text12 = days2 .
text13 = days3 .
text14 = days4 .
text15 = days5 .
CONCATENATE : '=<' text11 INTO text1 ,
'>' text12 INTO text2 ,
'>' text13 INTO text3 ,
'>' text14 INTO text4 ,
'>' text15 INTO text5 .
ULINE.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE :/5 'Invoice No.',
20 'Invoice Dt',
34 'Material',
55 'Serial No .' ,
72 'Plant',
79 text1 ,
89 text2 ,
99 text3 ,
109 text4 ,
119 text5 ,
129 'Floor' ,
139 'Total' .
ULINE.
ENDFORM. " LIST_HEADING
*& Form SUMMARY_LIST
text
--> p1 text
<-- p2 text
FORM summary_list.
CLEAR : us, us_total .
LOOP AT itab.
AT FIRST.
SKIP .
******modified by dhiraj- 23.11.2007*******************************
SELECT SINGLE * FROM t171t WHERE bzirk = itab-bzirk
AND spras = 'E' .
SELECT SINGLE * FROM t005u WHERE spras = sy-langu
AND BLAND = itab-bzirk AND LAND1 = ITAB-LAND1.
PERFORM list_heading_summary.
format color 4 intensified on.
write :/ 'Sales District : ',itab-bzirk,30 t171t-bztxt
,81 ''.
ULINE .
ENDAT.
AT NEW kunde.
SELECT SINGLE * FROM kna1 WHERE kunnr = itab-kunde .
format color 3 intensified on.
write :/ 'Dealer : ',itab-kunde,30(25) kna1-name1,
60 'City : ' ,kna1-ort01, 81 ''.
uline .
ENDAT.
AT NEW fkdat .
format color off intensified off .
write : /5 itab-vbeln,
20 itab-fkdat .
CLEAR flag_fkdat .
ENDAT .
at new matkl .
format color 2 intensified on.
write :/ 'Material Group : ',itab-matkl, 81 ''.
skip .
endat .
mcnt = mcnt + 1 .
dealer-days1 = dealer-days1 + itab-days1 .
dealer-days2 = dealer-days2 + itab-days2 .
dealer-days3 = dealer-days3 + itab-days3 .
dealer-days4 = dealer-days4 + itab-days4 .
dealer-days5 = dealer-days5 + itab-days5 .
state-days1 = state-days1 + itab-days1 .
state-days2 = state-days2 + itab-days2 .
state-days3 = state-days3 + itab-days3 .
state-days4 = state-days4 + itab-days4 .
state-days5 = state-days5 + itab-days5 .
us-days1 = us-days1 + itab-days1 .
us-days2 = us-days2 + itab-days2 .
us-days3 = us-days3 + itab-days3 .
us-days4 = us-days4 + itab-days4 .
us-days5 = us-days5 + itab-days5 .
IF flag_fkdat EQ 'Y' .
NEW-LINE .
ENDIF .
write : 42 itab-sernr ,
59 itab-days1 ,
69 itab-days2 ,
79 itab-days3 ,
89 itab-days4 ,
99 itab-days5 .
flag_fkdat = 'Y' .
at end of matkl .
skip .
format color 2 intensified on.
write :/ 'Total For : ',itab-matkl, ' - ' , mcnt .
clear mcnt .
uline .
endat .
AT END OF kunde.
dealer_total = dealer-days1 + dealer-days2 + dealer-days3
+ dealer-days4 + dealer-days5 .
format color 3 intensified on.
write :/ 'Total for : ',itab-kunde,' - ' ,
57 dealer-days1 ,
67 dealer-days2 ,
77 dealer-days3 ,
87 dealer-days4 ,
97 dealer-days5 ,
107 dealer_total .
CLEAR : dealer_total , dealer .
uline .
ENDAT.
AT END OF bzirk.
**************modified by dhiraj - 23.11.2007****************
SELECT SINGLE * FROM t171t WHERE bzirk = itab-bzirk
AND spras = 'E' .
SELECT SINGLE * FROM t005u WHERE spras = sy-langu
AND BLAND = itab-bzirk AND LAND1 = ITAB-LAND1.
state_total = state-days1 + state-days2 + state-days3
+ state-days4 + state-days5 .
FORMAT COLOR 4 INTENSIFIED ON.
WRITE :/10 t171t-bztxt, " 'Total for : ',itab-bzirk,' - ' ,
57 state-days1 ,
67 state-days2 ,
77 state-days3 ,
87 state-days4 ,
97 state-days5 ,
107 state_total .
CLEAR : state_total , state .
ULINE.
ENDAT.
us_total = us-days1 + us-days2 + us-days3 + us-days4 + us-days5 .
ENDLOOP.
SKIP 2.
FORMAT COLOR 5 INTENSIFIED ON.
WRITE :/10 'Total for US : ' ,
55 us-days1 ,
65 us-days2 ,
75 us-days3 ,
85 us-days4 ,
95 us-days5 ,
105 us_total .
ENDFORM. " SUMMARY_LIST
*& Form LIST_HEADING_SUMMARY
text
--> p1 text
<-- p2 text
FORM list_heading_summary.
DATA : text1(7) , text2(7) , text3(7) , text4(7) , text5(7),
text11(4) , text12(4) , text13(4) , text14(4) , text15(4) .
text11 = days1 .
text12 = days2 .
text13 = days3 .
text14 = days4 .
text15 = days5 .
CONCATENATE : '=<' text11 INTO text1 ,
'>' text12 INTO text2 ,
'>' text13 INTO text3 ,
'>' text14 INTO text4 ,
'>' text15 INTO text5 .
ULINE.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE :/10 'State',
57 text1 ,
67 text2 ,
77 text3 ,
87 text4 ,
97 text5 ,
110 'Total' .
ULINE.
ENDFORM. " LIST_HEADING_SUMMARY
*& Form LIST_HEADING_SUMMARY
text
--> p1 text
<-- p2 text
FORM list_heading_grp_summary.
DATA : text1(7) , text2(7) , text3(7) , text4(7) , text5(7),
text11(4) , text12(4) , text13(4) , text14(4) , text15(4) .
text11 = days1 .
text12 = days2 .
text13 = days3 .
text14 = days4 .
text15 = days5 .
CONCATENATE : '=<' text11 INTO text1 ,
'>' text12 INTO text2 ,
'>' text13 INTO text3 ,
'>' text14 INTO text4 ,
'>' text15 INTO text5 .
ULINE.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE :/10 'Material Group',
57 text1 ,
67 text2 ,
77 text3 ,
87 text4 ,
97 text5 ,
110 'Total' .
ULINE.
ENDFORM. " LIST_HEADING_GRP_SUMMARY
*& Form GET_MUSA_TA
text
--> p1 text
<-- p2 text
FORM get_musa_ta.
CLEAR vbpa .
SELECT SINGLE * FROM vbpa
WHERE vbeln = itab-vbeln
AND parvw = 'RE' .
and kunnr = 'TA001' .
IF sy-subrc = 0 .
IF vbpa-kunnr = 'TA001' .
WRITE : 129 'TA ' .
ELSE.
WRITE : 129 'MUSA' .
ENDIF.
ENDIF.
ENDFORM. " GET_MUSA_TA
*& Form grp_summ_list
text
--> p1 text
<-- p2 text
FORM grp_summ_list .
CLEAR : us, us_total .
itab_grp[] = itab[] .
sort itab_grp BY werks matkl.
LOOP AT itab_grp.
AT FIRST.
SKIP .
PERFORM list_heading_grp_summary.
ULINE .
ENDAT.
matgr-days1 = matgr-days1 + itab_grp-days1 .
matgr-days2 = matgr-days2 + itab_grp-days2 .
matgr-days3 = matgr-days3 + itab_grp-days3 .
matgr-days4 = matgr-days4 + itab_grp-days4 .
matgr-days5 = matgr-days5 + itab_grp-days5 .
plant-days1 = plant-days1 + matgr-days1 .
plant-days2 = plant-days2 + matgr-days2 .
plant-days3 = plant-days3 + matgr-days3 .
plant-days4 = plant-days4 + matgr-days4 .
plant-days5 = plant-days5 + matgr-days5 .
us-days1 = us-days1 + itab_grp-days1 .
us-days2 = us-days2 + itab_grp-days2 .
us-days3 = us-days3 + itab_grp-days3 .
us-days4 = us-days4 + itab_grp-days4 .
us-days5 = us-days5 + itab_grp-days5 .
IF flag_fkdat EQ 'Y' .
NEW-LINE .
ENDIF .
write : 42 itab-sernr ,
59 itab-days1 ,
69 itab-days2 ,
79 itab-days3 ,
89 itab-days4 ,
99 itab-days5 .
flag_fkdat = 'Y' .
AT END OF matkl.
matgr_total = matgr-days1 + matgr-days2 + matgr-days3
+ matgr-days4 + matgr-days5 .
FORMAT COLOR 4 INTENSIFIED ON.
WRITE :/10 itab_grp-matkl, " 'Total for : ',itab_grp-matkl,' - ' ,
57 matgr-days1 ,
67 matgr-days2 ,
77 matgr-days3 ,
87 matgr-days4 ,
97 matgr-days5 ,
107 matgr_total .
CLEAR : matgr_total , matgr .
ULINE.
ENDAT.
AT END OF werks.
plant_total = plant-days1 + plant-days2 + plant-days3
+ plant-days4 + plant-days5 .
FORMAT COLOR 4 INTENSIFIED ON.
WRITE :/10 itab_grp-werks, " 'Total for : ',itab_grp-werks,' - ' ,
57 plant-days1 ,
67 plant-days2 ,
77 plant-days3 ,
87 plant-days4 ,
97 plant-days5 ,
107 plant_total .
CLEAR : plant_total , plant .
ULINE.
ENDAT.
us_total = us-days1 + us-days2 + us-days3 + us-days4 + us-days5 .
ENDLOOP.
SKIP 2.
FORMAT COLOR 5 INTENSIFIED ON.
WRITE :/10 'Total : ' ,
55 us-days1 ,
65 us-days2 ,
75 us-days3 ,
85 us-days4 ,
95 us-days5 ,
105 us_total .
ENDFORM. " grp_summ_list{SELECT OBJEK CUOBJ
INTO CORRESPONDING FIELDS OF TABLE TAB_INOB
FROM INOB
WHERE OBJEK IN R_MATNR.
SELECT ATWRT OBJEK ATINN
INTO CORRESPONDING FIELDS OF TABLE TAB_AUSP
FROM AUSP
FOR ALL ENTRIES IN TAB_INOB
WHERE OBJEK = TAB_INOB-CUOBJ.
SELECT ATNAM
INTO TABLE TAB_CABN
FROM CABN
FOR ALL ENTRIES IN TAB_INOB
WHERE ATNAM = 'ZCURSEASON'
OR ATNAM = 'ZCURYEAR'
AND ATINN = TAB_AUSP-ATINN.
after this you can gether the data into one internal table.
Form one inter nal table it_final.
loop at TAB_INOB.
it_final-OBJEK = tab_inob-OBJEK.
it_final-CUOBJ = tab_inob-CUOBJ.
READ TABLE TAB_CABN WITH KEY OBJEK = TAB_INOB-CUOBJ.
IT_FINAL-ATWRT = TAB_CABN-ATWRT.
IT_FINAL-ATINN = TAB_CABN-ATINN.
DO SAME FOR THIRD TABLE
AFFTER DO ALL
APPEND IT_FINAL.
ENDLOOP.} -
How do I change language from english to swedish in all toolfields?
I would like to have all text in the tool"bar"? in swedish instead of english. Even when I click on the curtains I would like to have it in swedish.
If the Firefox user interface (menu bar) is in the wrong language or if you want to change the current language then you can get Firefox in the language of your choice here:
* Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox -
Change NLS_LENGTH_SEMANTICS from BYTE to CHAR on Oracle 9i2 problem!
Hi,
I have created a new database on Oracle 9i 2, I did not find the correct pfile parameter for the NLS_LENGTH_SEMANTICS setting.
So have created a standart UTF8 database and now I am trying to change the standard NLS_LENGTH_SEMANTICS=BYTE to CHAR. When I execute the following command in SQL PLUS "ALTER SYSTEM SET NLS_LENGTH_SEMANTICS=CHAR SCOPE=BOTH"
The system is tells me that command is successfully executed.
But when I look at the NLS_DATABASE_PARAMETERS table I do not see any change for the NLS_LENGTH_SEMANTICS parameter.
I have also restarted the instance but still everything is the same as it was before.
Do you know what I am doing wrong?
Regards
RobHHi,
Yeah you are right, the nls_session_parameters "NLS_LENGTH_SEMANTICS" for the app user is set to CHAR.
This means that NLS_DATABASE_PARAMETERS is from the SYS or SYSTEM user view?
Thanks a lot
Regards
RobH -
How to change email "From" field???
Hi Everyone,
New to blackberry. I would like to know how I can change the "From" field when you send an email from the phone to a name or email address I want it to say.
Here is my email situation:
My email address is ''[email protected]" (which i purchased) and anbody who sends an email to me gets forwarded to my yahoo email account. In yahoo I created an "alias" "[email protected]" so when I send an email, nobody sees my actual yahoo account which I want to keep private. How do I do this?
I searched in the forum but coudn't find any solutions. Thanks so much for any help.You couldn't find any solution because there is none given your current configuration.
You're receiving your email from your Yahoo account - not your peronal domain account. It's kind of a security issue for you not to be able to forge an email address on your BlackBerry. In fact, you can't change the FROM address when replying at all on a BlackBerry. You can forward using another email address that's set up on the device, but you can't manually enter a FROM address even when forwarding.
First thing to do is to set up your personal email account through your BIS setup.
Once you've done that, you can either stop forwarding your personal email to your Yahoo account, OR filter your personal email to NOT be forwarded to your device through your Yahoo BIS setup, OR have your personal email filtered on your Yahoo account and delivered to a folder other than the Inbox and it shouldn't be seen by your BIS setup.
Jerry -
OS X 10.6.5 Server AFP share - can't change group from 'staff' ???
Hi,
I'm running a new 10.6.5 XServe within a corporate AD environment. Well, when I say 'running' I mean testing - I could never let this odd beast loose on anyone with the awful state it's in.
Trying to set up the AFP shares, I simply wanted to assign one of our AD groups as the POSIX group for the share, just as I do on our existing Tiger server. 'simply' he says... oh I wish!
Server Admin 'lets' me change the group, then puts it right back to 'staff' again as soon as I hit Save. Same result when trying to change the Owner too, but I'm not needing to change that.
From Terminal, the usual permissions commands have no effect either. Try chgrp MyGroupName MyFolderName.
Tried changing while logged in as either root or admin, no difference.
So, all I want to do is change the group that's assigned to a share's POSIX permissions. Am I expecting too much from SL? Anyone else had this problem, and know the trick to solving it?
Can't believe this is happening - something so basic and important. I've wasted countless hours already with numerous other SL issues. Wish I'd never set eyes on the thing but it's been forced down my throat - we needed a new XServe, which turned up with SL installed of course. I'd gladly do a clean install of plain Leopard over the top, but apparently that's asking for (even more) trouble.
This POSIX nonsense is just the latest obstacle I need to get sorted.
Thanks for any help,
Paul.Hi,
I'm running a new 10.6.5 XServe within a corporate AD environment. Well, when I say 'running' I mean testing - I could never let this odd beast loose on anyone with the awful state it's in.
Trying to set up the AFP shares, I simply wanted to assign one of our AD groups as the POSIX group for the share, just as I do on our existing Tiger server. 'simply' he says... oh I wish!
Server Admin 'lets' me change the group, then puts it right back to 'staff' again as soon as I hit Save. Same result when trying to change the Owner too, but I'm not needing to change that.
From Terminal, the usual permissions commands have no effect either. Try chgrp MyGroupName MyFolderName.
Tried changing while logged in as either root or admin, no difference.
So, all I want to do is change the group that's assigned to a share's POSIX permissions. Am I expecting too much from SL? Anyone else had this problem, and know the trick to solving it?
Can't believe this is happening - something so basic and important. I've wasted countless hours already with numerous other SL issues. Wish I'd never set eyes on the thing but it's been forced down my throat - we needed a new XServe, which turned up with SL installed of course. I'd gladly do a clean install of plain Leopard over the top, but apparently that's asking for (even more) trouble.
This POSIX nonsense is just the latest obstacle I need to get sorted.
Thanks for any help,
Paul. -
Please help!
It would be tremendously helpful to be able to access, set restrictions, and make changes from the parents device, to all devices under the same iTunes account, so that I could make changes to my kids devices without physical access.
I understand that I can set up a different Apple ID for the kids devices, or take physical control of the device and make the changes myself. However, my teenage son is technically savvy enough to have a job in Silicon Valley, as are most young people these days. However, in order to access his devices the current way, I first have to bypass the four digit pass code. This starts a fight of why I need in the device and continues to escalate. The argument that I am the parent will gain access but the fight is simply exhausting, and quite frankly shouldn't have to happen at all. He is not yet an adult, he did not pay for his iPad or iPhone and I, as a parent, should have not only have the right to change options at will, and from anywhere, but look at history or current activity when I feel like it.
I currently have the settings where app and in-app purchases require my password to be put in, and he must come to me to type it in, but I need more control and would like, and should be able to access any of our six devices and make individual changes simply by logging in to my account, with my password.
If I can see all my devices on the "Lost My iPhone" app, this technology should be easy to make happen.
C'mon parents! I have a pretty good kid, given all things that they can get into, but I am not stupid. For everything I see has been done, there is much more I haven't seen. I want my children to be kept safe and be able to know what they are looking at or listening to. We parents are the only ones who know our beliefs and what our kids can handle and when.
Thanks for any support or information that I may be missing in order to fulfill my request.There are mobile device management solutions that can do this, including in Apple's OS X Server system, but most parents generally find that setting this up is more work than it's worth. If you're interested, though, there are a couple that at least purport to be free (I don't know if there are any hidden "gotchas"):
http://www.unwireddevicelink.com/features/
https://meraki.cisco.com/products/systems-manager
and Apple's system:
http://www.apple.com/osx/server/features/#profile-manager
I don't think any, however, allow you to see current activity or browser history. iOS doesn't expose those to access from MDM solutions, to the best of my knowledge.
Regards. -
I did not do my research before changing my Apple ID from an outdated email address to a current one. I just changed and verified and though I was all set. WRONG! Now I cannot sign in to iCloud because it will not let me enter the new Apple ID. I read the 10/30/13 randers4 post to just change your Apple ID back then sign in and change it to the new email address again and then you can sign in, but I cannot change back to the prior email address Apple ID because that is no longer an active email account (or at least not mine). Any thoughts on how to get signed into iCloud when it does not allow me to type in the new Apple ID and the old Apple ID no longer exists.
I see that many people have asked, but no one has come up with a solution that I found.
Thanks for any help!This did not work for me. My old email account for iCloud still pops up on my screen every time I open my macbook. I've deleted it, reset it, every thing I can think of and it still shows up. I think six months of this is more than enough time to wait.
RDG -
I have pdf file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method? alternate method? I have Adobe Acrobat X Pro and Windows -7 platform.
Yes, I just want to cover up all the pages for those particular area of document numbers.
Nothing sensitive about it. I just want to show the correct document numbers on all pages in print out.
So, I wanted to cover up by comments, but commenting on each page will be difficult. So, I wanted to comment the same on all pages. -
How to change the "from email id" of all the notifications in the instance
Hi,
I have a requirement to change the from email address of all the outbound notifications in an instance.
Presently our notifications are having from address as R12 Workflow Mailer ["[email protected]"]
We want to change this to ABC. So that all the outbound notifications will have
ABC as from email address.
How do we achieve this ? Is there any mailer level setting for this ?
Thanks in advnace.
Regards,
PrabhuHi,
The 'From' value in the email notification is derived from 'From' parameter value, but the actual email address used for 'From' field is the 'Reply-to Address' parameter value that is specified for the mailer. If you want to specify a different email address you can change the 'Reply-to Address' parameter value.
You can also specify the From value based on the kind of notification you send, you can do it by defining the #WFM_FROM message attribute as specified below
• #WFM_FROM - Define this attribute for a message to specify the value that appears in the From field of the message header when the e-mail notification message is delivered to a user. If the #WFM_FROM message attribute is defined for a notification, the notification mailer that sends the message will use the #WFM_FROM attribute value in the From field for that message, overriding the mailer’s From parameter value
regards
saroja -
Our picture transfer from iphone, ipads and or Sony DSC-W150 camera ended when we changed int providers from xfinity to frontier. All attempts to troubleshoot have not corrected problem. The only changes to the system that was functioning properly are Fios int service and router. All apple components are using the fios router. Can anyone Help get us up and running again? Thanks
How have you been making the physical connection from:
iPhone
iPads
Sony DSC-W150 camera
...to your Mac?
If WiFi, have you changed the WiFi encryption method or WiFi password? If so, each device need the new information netered into it manually to get onto your "new" WiFi Network. -
I have an Adobe Flash Professionals digital classroom book and was following all steps easily until it ask me to select the text tool and change it from classic to tfl in the property inspector. I looked and all that drops down is dynamic, static, and input. Where is the TFL and Classic ? I watched adobe learning center but he was using CS5. Can anyone please help?
Hi,
Do you use Flash CS6 to follow the instructions in the classroom book? If yes, then you can find it under text drop down for an AS3 Document as shown below
If you follow the instruction in Flash CC or Flash CC2014 then you will not find this option as this is deprecated.
Thanks!
Mohan -
Framemaker v11 Books unable to clear all change bars from documents
I have converted all Framemaker v10 documents to v11 by opening and saving. However when opening the Book v11 for these documents and applying the 'clear all change bars' option a book error log message advises that the documents cannot be opened as they are in a previous version! When performing the same function on the individual documents outside of the Book this works fine. But unable to clear all change bars within a book when selecting all the files in one go. Is there a bug with Books in v11?
My version is FM11.0.0.380 so I will install the patches. I did open all documents up from within the book and then individually saved them, then i applied the 'clear all change bars' and this worked. It just does not seem right that you can clear the change bars from the documents from outside the book but when you try it from within the book it says cannot open document as it was created with a previous version. I have managed to get it working but would be good to know if it is a book bug or not. I will try it on another Book when I have upgraded to the latest patch.
-
My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore
Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H.
Maybe you are looking for
-
How to add a field in dynamic selections
HI, There is a requirement in which i need to add a field in existing program of dynamic selections. I have added a field in the screen.But I was not able to write the label and is not displaying. I ahve copied evrything from existing coding.but stil
-
Why did my voice texting stop working on all devices?
All of a sudden my voice for texting and IMessage stopped working on both my ipad mini and iPod touch. It is enabled in settings and I have tried a hard boot.
-
MacBook to Projector--- Cables?
I need to connect to a projector, with sound and video. Any tips on cords I need? Thanks, Erin
-
Issue services with different Internal Orders within a Plant from one PO?
Hiii... Please advice me of issuing services through one purchase order (one vendor comes and do the service to different machines of different internal orders in a plant) to different internal orders within a plant. Thanks Manoj
-
Why am I unable to login to Apple Support site from my iPhone, but have no problem from my desktop?
Why am I unable to login to the Apple Support site from my iPhone, but have no problem from my desktop?