Changing horisontal line thickness in equations

Hi,
Is there a way to change the horisontal line thickness for divisions in equations?
I tried doing it on the Reference page, thinking that "Single line" was perhaps used for the lines in divisions, but to not avail.
Thanks,
Mats

Mats, I was hoping that one of the FM math-using folks here might have an answer for you, but perhaps they're all at "summer math camp" right now <g>. Unfortunately I've never heard of it being possible to change the line thickness -- or any other display characteristic of equations, for that matter. If you didn't see this on the Framers list recently, Winfried Reng posted a link to a working search on a FrameUsers repository, here: http://www.mail-archive.com/[email protected]/ Sheila

Similar Messages

Why do borders for some cells allow changes in line thickness, but other cells are locked in only one thickness?

It looks like you should be able to choose different line thickness for cell borders, but for some cells you can get three choices (0.5, 1, 2 pt), but in other cases you can only do 0.5?
I can't make a consistent thickness border around the outside of all my cells!

VS,
Yes, I have lots of ideas. After all that work you probably don't want to hear them.
1. I would use PDF versions of rotated text boxes, inserted into the cells as background Fill rather than floating the actual text boxes over the table.
2. I would never merge a cell, or divide, a cell. Too many problems await you down the road if you do that. There are many ways in Numbers to avoid having to do those things. These are things we must do in Excel to get by, but we don't have to do them in Numbers.
3. There is a Line Type called "Thin" that has only one size, and another line type shown as a heavier solid for which the weight can be adjusted. It's possible that you have some places where you need to change the line type.
I believe that your difficulty may come from the merging of cells causing some ambiguity as to which border needs to be selected to change the display. This would be a bug, because you should be able to just select the border and edit it, but your table may have become so complex that the program has lost track of things in the course of all your changes.
My suggestion is to print your table just as it is, for reference, and start over in a new document, not an imported one. Don't merge or split. Use multiple simple tables and the occasional text box for annotation. You will be on your way to doing things the "Numbers Way".
Jerry

Using a slider to change line thickness

Hi,
This is a continuation of a project I have been posting over the last week.
My latest problem is trying to make a slider that changes the line thickness in a drawing app that I would to share with my students. When moved from left to right a circle changes scale. This circle would act as a visual reference on the stage telling the viewer that the line thickness is changing. Right now I just want to figure out how to connect the slider so that the circle changes dynamically. Once I get that I feel I can figure out how to connect it to lineStyle().
I hope I'm explaining this clearly.
The current code I am attaching has the circle change size at onle two points-the far left and far right.
I keep trying to write something that uses mouseX properties but so far nothing is working.
Thanks

Hi,
I appreciate the help and, yes, that pretty much looks like what I was going for.
Your solution looks clean!
The trick seems to be to connect the value change in that line to the drawing line which is mouseX and mouseY.
A couple of errors have me wondering if it is possible to change the lineStyle() dynamically. This is vector based and I think I might have to swtch over to a bitmap and use a Sprite, whichhas more of a chunky look tio it - based on a few previous attempts I made.
I switched gears today and tempoarily and made a lot of buttons that change the line thickness. A swf file is attached.
I will take your code and see if I can use it as a building block to change the line dynamically.
If I figuret it out I'll post it.
I also just ran into info on the Adobe website regarding the strokeObject, which is nowhere to be found in my reference manuals for AS3.I think the strokeObject allows you to make creative changes to a drawing line. So much to learn but hey that's what it's all about
Cheers

Changing Line Thickness on Grouped Objects?

So I'm changing my style of animation from hand-drawn art to the usage of things such as the line and pen tool, in Adobe Flash CS3. I am drawing characters that have segmented parts, I.E. the arms, legs, head. body, ect are all separate grouped objects with a set line thickness. The problem is that when I try to shrink or grow the character, the lines making up their body is either too thick or too thin, depending on whether I make him bigger or smaller. It seems that I am unable to change the line thickness of grouped objects, or dare I say it, a group of grouped objects. The properties panel greys out when I select an object, so I have no access to it at all. I dont want to have to go and change the line thickness individually on each object, whose lines are all the same thickness to begin with.
Is there any trick or plugin I can use to change this, so the line thickness of grouped objects can be changed? Or am I just ignorant with the answer just staring me in the face? Either way, I would REALLY appreciate the help any of you could provide!

Okay, so I seem to have found an even better solution to my problem than what I was hoping for. I can just convert the lines into fill by going to Modify > Shapes > Convert Lines to Fill. This makes it so the lines will now change in relative size depending on how much I shrink or grow an object.
Thanks for trying everyone, but I found my solution!

PSE 8 brush strokes randomly change to heavy line thickness

I installed PSE 8 on a trial offer and when I use my Wacom stylus, the line thickness randomly changes to a heavy line. I've cleared prefrences, and reloaded the Wacom drivers and messed with sensitivity. Any suggestions?

Hi,
PSE allows user to change various parameters by the Pen pressure of the Wacom Tablet.
While using Brush tool, You will find an arrow icon on the tool bar at the end, Opening it, you will find several parameters whicj can be controlled by Wacom tablet Pen pressure. So while you are using brush with the Pen, the pressure you apply on the Wacom, increases the brush size.
In case you need to change the Opacity of the brush, you can set it from the options bar and continue using and do Wonders.
Try it. This is really good.
Thanks,
Swarnima

Line thickness change is moving item. Help! Never done that before!

I have a simple box.
I copy it and paste it in back (done this 1,000 times before with no problems)
I change the outline thickness on the box in the back. Expecting to see the outline evenly grow behind the front box.
Instead of keeping the box exactly behind the one in front... the changing of the outline is MOVING THE BOX.
I don't know what setting I hit to make this happen. It has never happened to me before.
I don't know where the setting is to take it off.
I don't want the thickness of the outline to move the actual item.
It is ridiculous but I cannot figure out what is doing this.
Please help!
Thanks

A million thanks!! That was it!!! Thank youuuuuu!
Whew. I thought I was going crazy!
Thanks again!
MICHELLE MARTORELL
Creative Director, Creative Ideology
Outside Sales Contractor - Wacom
Websites | Advertising | Marketing | Consulting
Ph: 585-319-2839 (txt/call)
Email: [email protected] <mailto:[email protected]>
Personal Page: mmartorell.com <http://creative-ideology.com/michelle-martorell>
Company Website: creative-ideology.com <http://www.creative-ideology.com/>

Office PDF Print and office PDF creator(adobe plugin) create different line thickness result

Hi together,
Office PDF Print and office abobe PDF creator(adobe plugin) create different result. It seems that Adobe PDf creater improves line thickness to 1pt instead of 0,3pt. Is there a setting to change to original 0,3 because this 0,3 are standard line thickness for our documents. with adobe V9 the line was 0,3pt. (we need thin, mid and thick lines)
After 2 day's google searching this is the last change for hope :-)
Software Versions
Windows 7
MS Office 2007 (12.0.6668.5000) SP3 MSO (12.0.6662.5000)
Adobe Acrobat X (10.1.7)
Left: MSO Adobe Plugin / MId: MS Word / Rigth: PDF printed over "print" AdobePDF printer

Hi Bill,
Thanks a lot for the fast reply, i have tested it with 300dpi but I didn't get a different result. The bad thing is that not all lines getting thicker. if there is no arrow or ball at the end of the line the line thickness will not change (see Pic). I think this is a Acrobat error, i don't think that this will improve the pdf quality if the progam changes only some lanes and not all to 1pt.
I Think we must downgrade to version 9.

Formating Line thickness for lines in graphs with more than 6 lines.

I have a line graph with more than 6 lines on it and I'm trying to make them all 1px.
I can specify a line thickness for the first 6 lines but after that, the lines go back to the default thickness.
Is it possible to change the default line thickness for a graph or format the line thickness for the 7th line and more?

Good news! I found out how to format more than 6 lines of data and it's really simple to do!
In the bottom left hand corner of the Format Chart Data, next to the Clear All button, is a button marked ADD.
If you click this button, another row is added allowing you to format the 7th line of data.
Click again and you get a row for the 8th line and keep clicking to add more lines.
I'm making a note of it here in case it is useful to someone out there who searches on this problem in the future.
Edited by: user2052587 on Jan 6, 2010 2:45 PM

How to increase line thickness in line charts?

Hi,
I am using Crystal Reports 11.
I can change line thickness for only 4 series using "Format connector line" in the Design window. When the chart has more than 4 series, I can't change the thickness of lines except for the default 4 series.
I try using the other method to change the thinness of line, i.e.:
Got to the Preview window - click the line in chart - right click and go in Format Connector Line - change the thickness.
But, when I close the Preview window and re-open it again, I find that the situation is the same: line thickness is changed for only 4 series.
It looks like this way is effective just in computer memory.
Is this caused by the old version of CR?
If not, any approach to handle this problem?
Thank you in advance.

Thank you.
It is a group level chart.
I find "Apply Changes to All Charts" under Chart Menu, but after I made some changes on the chart, it is still grey and I could not use it.
How to do?
Edited by: Holdup on Feb 23, 2012 7:27 PM

How to set line thickness in line chart?

There's really no upper bound on how many series might be displayed on my graph, but say I'm graphing 52 series.
Is there a way to set the thickness of the lines without generating a graph of 52 things and settting the thicknesses individually?
What I'm doing now: preview the report with parameter that will make for a lot of series. Then click each series, set the width, then when done tell it to apply the customization to all graphs. Is there a speedier way?
Thanks

Sorry for re-surrecting this old thread, I could not find anything mroe recent on this topic. If I have 4 data series, I can easily change the line and marker format for each series in the Design window. My chart however has 6 series. How do I format the line and markers of the 5th and 6th series? It appears that any changes that I make in the Preview window, is not carried over to the Design window, and regardless of how many data series there are, the standard 4 are all that is displayed in the Design window. (I am also using Crystal XI)
Edited by: VanWykie on Mar 30, 2010 2:15 PM
Edited by: VanWykie on Mar 30, 2010 2:16 PM

3d plot line thickness

How does one change the thickness of individual lines in 3DLine Plot? I am able to use 3D Graph Properties -> Plots -> Overlay to change the thickness of all lines, but can't figure out how to change individual lines. Is it even possible?

Hello jmountney,
The overlay for a line can be set on a plot-by-plot basis, and you can do this either via the 3D Graph Properties window (right-click>>3D Graph Properties) or via property nodes. There are a couple things to keep in mind:
1) The overlay is assigned to a given plot index. The best way to set up indices is in the 3D Graph Properties window. The Plots tab will allow you to assign plot IDs and overlay styles for each index.
2) You'll need to build each line you want to manipulate separately as its own plot. This is done by specifying a Plot ID when using the create_plot_line function. I would recommend pre-assigning Plot IDs for the range of plots you anticipate using in the 3D Graph Properies window.
3) You can configure overlays dynamically (at runtime) via property nodes. Set the plot index you want to modify using the Active Plot property, then change the overlay parameters. Any changes you make will affect the current Active Plot.
4) The plot ID is NOT equivalent to the plot index. The plot ID is the number displayed in the 3D Graph Properties window and is the number you use when specifying a plot to add a vector to (This can be any positive or negative integer). The plot index is the index of the plot ID array. If you specify a Plot ID that's not currently in use at runtime (wire an unused number to the create_plot_line function), it will create and occupy the next available plot index. This means that unless you assign plot IDs in sequence (0,1,2,3...) the Plot IDs will not match the plot indices. Just something to keep in mind.
Hope that helps!
Tom L.

White horisontal line

I've just bought iPhone 3G. After 2 hours of use in the middle of the screen I saw a white horisontal line.
I tried to switch off, reboot and restore iPhone, but the line is still on the screen. What can I do?
Thanks in advance!

Standard troubleshooting steps in the following order:
1. Power the iphone off, then back on.
If no change, continue:
2. Reset: Press the sleep/wake button & home button at the same time, keep pressing until you see the apple logo, then release. Ignore the slide to power off. No saved data or settings will be lost.
If no change, continue:
3. Restore your phone from your most recent backup, Note, however: if the problem is related to corrupt data in your phone's backup, while this will restore a fresh OS, it will also restore the problem.
If no change, continue:
4. Restore as a "new" phone in itunes & re-sync your content. All saved data will be lost.
If no change, make an appointment at an Apple store, as you most likely have a hardware problem. There are no more user troubleshooting steps available.

IMAQ overlay Line Thickness

Hi,
I have used IMAQ overlay to map two line onto an image. But I want to change the thickness of these lines and couldn't figure out any way. Help is appreciated.
Regards.

It looks like IMAQ Overlay Line doesn't let you specify line thickness. You might consider "tricking" it by overlaying two or more lines, displaced slightly from each other but close enough to merge into a slightly thicker line. Note that if you do this, you need to think about the orientation of the line, as you'd want to displace your "sub-lines" at right angles to the original line orientation. For example, if the original line was horizontal, you'd draw two sub-lines a little above and a little below the original line (a vertical displacement), and if the original line were vertical, you'd draw a little to the left and right (a horizontal displacement).
If you decide to go this route, you'll do yourself a BIG favor if you write the "Thick line" function as a sub-VI that looks a lot like IMAQ Overlay Line, but has an additional "thickness" parameter. Hide all of the "messy details" inside this VI, including the calls to IMAQ Overlay Line. This will keep your calling VI "focussed" on the task it is trying to do, without getting "irrelevant" Line-Thickness code popping up and occupying a lot of Block Diagram space.
BS

BAPI to read and change schedule lines in APO

Hello experts,
We want to firm schedule lines inside the firm zone of the APO procurement scheduling agreements with a daily job. For this we are trying to use BAPI BAPI_POSRVAPS_GETLIST3 and BAPI_POSRVAPS_SAVEMULTI3. The getlist one does not return schedule lines, it returns purchase orders and purchase requisitions. Are these the right bapis to read and change schedule lines in APO? or is there anyother one we can use?
Thanks and regards,
Ergul

Hi,
         You can use the below code to read the schedule lines.
Checking a session exists
    CALL FUNCTION '/SAPAPO/RRP_SIMSESSION_GET'
      IMPORTING
        ev_simsession = gv_sims
        es_gen_params = gv_params.
If not create a new session and read it
    IF gv_sims IS INITIAL.
      CALL FUNCTION '/SAPAPO/RRP_SIMSESSION_CREATE'
        IMPORTING
          ev_simsession = gv_sims.
      CALL FUNCTION '/SAPAPO/RRP_SIMSESSION_GET'
        IMPORTING
          ev_simsession = gv_sims
          es_gen_params = gv_params.
      g_cre_chk = 'X'.
    ENDIF.
CALL FUNCTION '/SAPAPO/CMDS_TPSRC_GET'
    EXPORTING
      iv_ebeln                       = p_l_t_acknh_ebeln
      iv_ebelp                       = p_l_t_acknh_ebelp
    TABLES
      et_tpsrc_all                   = lt_tpsrc
    EXCEPTIONS
      matid_not_found                = 1
      locfrom_not_found              = 2
      locto_not_found                = 3
      scheduling_agreement_not_found = 4
      error_selecting_schedagreement = 5
      OTHERS                         = 6.
IF sy-subrc = 0.
reading the scheduling agreement records
    READ TABLE lt_tpsrc INTO ls_tpsrc INDEX 1.
    CALL FUNCTION '/SAPAPO/PWB_BZQID_GET_ORDER'
      EXPORTING
        iv_simid               = '000'
        iv_bzqid               = ls_tpsrc-bzqid
      IMPORTING
        ev_ordid               = lv_iordid
      EXCEPTIONS
        lc_connect_failed      = 1
        no_elements            = 2
        unit_conversion_failed = 3
        OTHERS                 = 4.
    IF sy-subrc = 0.
      CALL FUNCTION '/SAPAPO/PWB_GET_RELATED_ORDERS'
        EXPORTING
          iv_ordid             = lv_iordid
          iv_order_type     = '16'
          iv_simid            = '000'
        IMPORTING
          ev_ordid          = lv_eordid
        EXCEPTIONS
          order_not_found   = 1
          lc_connect_failed = 2
          no_elements       = 3
          OTHERS            = 4.
      IF sy-subrc = 0.
        APPEND lv_eordid TO lt_ordid.
        CALL FUNCTION '/SAPAPO/DM_PO_READ'
          EXPORTING
            iv_simsession     = gv_sims
            is_gen_params     = gv_params
            it_ordid          = lt_ordid
          IMPORTING
            et_schedule       = p_lt_sched
          EXCEPTIONS
            lc_connect_failed = 1
            lc_com_error      = 2
            lc_appl_error     = 3
            OTHERS            = 4.
      ENDIF.
    ENDIF.
ENDIF.
Use '/SAPAPO/CMDS_SNP_MM_ORD_MODIFY' function module to change the schedule lines (Pass '16' to iv_order_type parameter).
Let me know if u have any issues.
Regards,
Siva.

Problems with overage charges and making account changes on line

I have quite a bit of history involving my attempts to resolve the problem of catching my account before it goes over the minutes allowed and making the changes on line (to cut down on call volume) to change my account to raise the minutes allowed for that billing cycle. I was given one reason why it didn't work the first time (I didn't print out my confimation proving I made the changes - bit the bullet and paid those charges) and so the second time wanting to avoid the problem from the first time I made sure I printed out my confirmation. The confirmation had an effective date of change of 07/19/2012 the day I was informed I was nearing my allowed minutes. There were only 4 or 5 maximum days left in that billing cycle so I wanted to nip the problem in the bud and make the changes to my account to be made "that" day. My confirmation said the changes were effective 07/19/2012. In plently of time before that billing cycle ended. Again I was told I did something wrong. This time I'm holding my confirmation in my hand even as the person is telling me again I did it wrong. The purpose Verizon wants it's customers to use the available on-line option is to cut down on their call volume. I didn't go to school to get the knowledge apparantly needed to perform these particular tasks in a manner that is acceptable to Verizon. Has anyone else had problems with trying to fix their problems themselves using Verizons "helpfull" on-line choice?

I have an explanation for you by what was meant by "you did it wrong."
When you make a change effective the date you are requesting it and not at the start or end of your billing cycle, your minute usage for that month is pro-rated.
For example, you say you made a change, because you were nearing your allowance limit, on 7/19/2012 and wanted it effective that day with 5 days left in the billing cycle. Lets assume that your allowance is 700 minutes/month and you were at 675 minutes for that month(still under your monthly allowance). If you make a change effective with 5 days left in your billing cycle to the 1400 minute/month allowance, your allowance for the 1st 25 days of your cycle will have been pro-rated to (25/30) * 700 = 583 minutes. This would mean you would have already had an overage of 92 minutes for the 1st 25 days of the month. Additionally, you would have a pro-rated allowance to use the last 5 days of (5/30) * 1400 = 233 minutes. This is how the pro-rating works when you make a change effective during the middle of your billing cycle.
What you need to do next time to avoid these overage charges is to make the change effective at the beginning of your current billing cycle. So if you had made the change on 7/19/2012, but your billing cycle ended on 7/24/2012(5 days later), you should have made the change effective at the beginning of your current billing cycle, or 6/24/2012. This is called backdating the change. In this instance, you would have received a credit on you account for the cost of the 700 minute plan and been charged the full amount for the 1400 minute plan on your next bill, which I believe is a net additional charge of $10 and you would have had the use of 1400 minutes for throughout the entire month. In this example, you would not have had any overage with your 675 minutes during the 1st 25 days of your cycle and would have been able to use 725 minutes over the last 5 days of your billing cycle. This is much better than the overage charge you would receive with 92 overage minutes @ $0.45/minute = $41.40.
I hope this explains it.

Changing horisontal line thickness in equations

Similar Messages

Maybe you are looking for