Changing host computer name

When I first set-up my iPad3, the computer [windows] I used was named "eyore1. I recently changed computers [Windows]; the new computer is named "eyore" My ipad will not sync. It seems to be waiting until it's connected to "eyore1". How can I change the setings in the iPad to reflect the new pc computer host name?
tia
mcm

Hello.
Using DHCP you may really have problems changing the hostname.
The fact is: The DNS server may assign your machine a host name which has nothing to do with the host name you sent to the DHCP server. Depending on the server (typically DHCP and DNS server are the same machine) nothing will really work. (This is the case with my configuration where the servers are located on a DSL router.)
I solved the problem the following way:
* I created two host names (MyMachine and MyMachineNet) in the /etc/hosts file (Solaris 10 and newer: /etc/inet/ipnodes must be changed, too.)
* "MyMachine" is 127.0.0.1 (localhost):
127.0.0.1 localhost MyMachine
192.168.178.100 MyMachineNet* I assigned the name "MyMachineNet" to the network interface in /etc/hostname.networkcard.
* I use DHCP
The computer name (in /etc/nodename) is "MyMachine". Some programs (e.g. Gnome !) establish a TCP/IP connection to "MyMachine" instead of "localhost" (I do not understand why). These programs are now satisfied because the host name "MyMachine" represents 127.0.0.1 (localhost).
I know that there is a switch that tells Solaris to take the machine name from DHCP/DNS instead of /etc/nodename. Unfortunately I forgot where it is.
Martin

Similar Messages

Changing the computer name in SAP R/3

Computer Name of the SAP R/3 server has been changed after the full installation of Oracle 9i and SAP R/3.
How to change the computer name after the SAP R/3 can start-up sucessfully?

Hi
it is not possible after installing R/3, you cannot change the host name , as per my understanding because when you install it generates a solution manager key based on host name SID and instance number.
Regards
Subhash

Change NETBIOS (Computer Name) of a computer under a domain controller by SCCM 2012 colsole

Is it possible to change NETBIOS (Computer Name) of a computer under a domain controller via SCCM 2012 Console?
example:
Domain Name: viyella.com
current Computer (FQDN host) name: vtgit-shohal.viyella.com
New Computer (FQDN host) name: vtgit-moin.viyella.com
if so, I will organized all computer of my organization and managed.
please help.
Thanks,
Shohal Bhuiyan
Shohal Bhuiyan

Hi,
Netdom is
a command-line tool that is built into Windows Server 2008 and Windows Server 2008 R2. It is available if you have the Active Directory Domain Services (AD DS) server role installed. It is also available if you install the Active Directory
Domain Services Tools that are part of the Remote Server Administration Tools (RSAT).
Netdom renamecomputer
http://technet.microsoft.com/en-us/library/cc788029.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How automatically change the computer name as VM name

Hi All,
I need to deploy lot of VM via one VM ,i need to use the newsid with change the computer name like VM name.
i want to script this by geting the VM name and send it to newsid to change the computer name.
there is a way to get the VM name from running guest or host.
Thanks,

Hi All,
i can't use template since i have check point on that VM.
i have one vm called goldenimage load to lib and i have to deploy 8 vm per one host,i must use newsid before i connect that guest machine to network domain,so i what to add to runone registery some script that run the newsid in first time but for each vm am i need to change the computer name according to vm name.
if the vm name is XPPro-xx-yy(xx-host name yy-vm num) i want that will be also the name of computer name.
Thanks,

How to change the computer name

I need to change the computer name but after this I cannot access to the historical data (printing alarms).
I have already changed the settings in Options->System and restarted the system.
With MAX 3.0 I can see that all the alarm records are stored with the old computer name \\computer name\process\....
How can I do to read the old alarms with the new computer name?
Thank you
Michael

Hi,
When you change the computer name in Options>>System, you are not changing the name of the computer. Rather, you are telling Lookout to log to either a remote or local system. Here are the specifics:
1. Computer Name: Name you want the traces to appear with (\\computer_name\process\...)
2. Default Computer: Computer you want to log to. If the name listed here is different than your computer's name (as seen by Windows), then it will attempt to log directly to that remote machine.
3. Default Path: Directory on either your local or remote machine that you want to log to.
To change the name of your local computer, you will need to do that in Windows. If you have WinXP, you can do this by right-clicking on My Computer and selecting Computer Name.
Go
od Luck
Mike

Changing the Computer name with ARD

Hello, I am new to mac but I am now in charge of running a mac network or machines for an art department. I see that with ARD you cna change the computer name. If you change the computer name does it just change anything on the client machine? I just want to change the name in my All computers name so its easier to identify each users machine.

There are four User-fields that you can enter information into with ARD. What I've done in the past is put the primary user of a computer into one of those fields. That way the user doesn't appear in the machine name, but I can still easily access this information.
Note that if these computers are also in a Workgroup Manager group, that WGM will just change the name back on you. You would need to rename the computer through Workgroup Manager for this name change to take affect.

I have a MacBook Pro, how to change the computer name in the "Find Iphone"

I have a MacBook Pro, how to change the computer name in the "Find Iphone"?

Thank you for help! I was inattentive reading your answer. The thing which confused me was that I noted in blue. I had to just write in a red box and close the configuration window.

I changed the Computer Name and i can not run EM.

I had to change the computer name in order to connect to the intranet.
I updated the listener.ora and tnsnames.ora with the new computer name.
I can run SqlPlus but i can not run EM on http://tahirpc.isu.intranet:1158/em *
I checked Services and I saw that OracleDBConsoleorcl service do not work. I get error code:2 when i try to run it manually.
What should i do?
New computer name: tahirpc.isu.intranet
Old computer name: mtkeskin.isu.intranet
OS: Win 7
Oracle: 10.2.3
------------------------

Thank you Jean-Valentin . I tried those but unfortunately this did not work.
Here is what i did on CMD:
RECREATE
C:\Users\mtkeskin>EMCA -CONFIG DBCONTROL DB -REPOS RECREATE
STARTED EMCA at 28.Oca.2010 11:28:43
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: ORCL
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user: l
Password for SYSMAN user:
Password for SYSMAN user: Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ D:\oracle\product\10.2.0\db_1
Database hostname ................ tahirpc.isu.intranet
Listener port number ................ 1521
Database SID ................ ORCL
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: Y
28.Oca.2010 11:29:07 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-01-28_11-28-42-AM.log.
28.Oca.2010 11:29:24 oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
28.Oca.2010 11:32:09 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
28.Oca.2010 11:32:10 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
28.Oca.2010 11:37:14 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
28.Oca.2010 11:37:34 oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing CMD /C D:\oracle\product\10.2.0\db_1\bin\emctl.bat depl
oy dbconsole D:\oracle\product\10.2.0\db_1\tahirpc.isu.intranet_ORCL tahirpc.isu
.intranet:3938 tahirpc.isu.intranet ORCL
28.Oca.2010 11:37:34 oracle.sysman.emcp.EMConfig perform
SEVERE: Error instantiating EM configuration files
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2010-01-28_11-28-42-AM.log for more details.
Could not complete the configuration. Refer to the log file at D:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-01-28_11-28-42-AM.log for more deta
ils.
DROP
C:\Users\mtkeskin>EMCA -DECONFIG DBCONTROL DB -REPOS DROP
STARTED EMCA at 28.Oca.2010 11:47:57
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: ORCL
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: Y
28.Oca.2010 11:48:13 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-01-28_11-47-56-AM.log.
28.Oca.2010 11:48:17 oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
28.Oca.2010 11:48:18 oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
28.Oca.2010 11:50:35 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
Enterprise Manager configuration completed successfully
FINISHED EMCA at 28.Oca.2010 11:50:35
CREATE
C:\Users\mtkeskin>EMCA -CONFIG DBCONTROL DB -REPOS CREATE
STARTED EMCA at 28.Oca.2010 11:54:55
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: ORCL
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ D:\oracle\product\10.2.0\db_1
Database hostname ................ tahirpc.isu.intranet
Listener port number ................ 1521
Database SID ................ ORCL
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: Y
28.Oca.2010 11:55:19 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-01-28_11-54-55-AM.log.
28.Oca.2010 11:55:32 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
28.Oca.2010 12:00:13 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
28.Oca.2010 12:00:27 oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing CMD /C D:\oracle\product\10.2.0\db_1\bin\emctl.bat depl
oy dbconsole D:\oracle\product\10.2.0\db_1\tahirpc.isu.intranet_ORCL tahirpc.isu
.intranet:3938 tahirpc.isu.intranet ORCL
28.Oca.2010 12:00:27 oracle.sysman.emcp.EMConfig perform
SEVERE: Error instantiating EM configuration files
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2010-01-28_11-54-55-AM.log for more details.
Could not complete the configuration. Refer to the log file at D:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-01-28_11-54-55-AM.log for more deta
ils.
I checked log files but i did not understand anything of 'em :(
Edited by: NaKKaSh.TR on 28.Oca.2010 12:12
Edited by: NaKKaSh.TR on 28.Oca.2010 12:14

Changing my computer name after registration

Guys, I do need help please.
I got my macbook Air & I made the registration on imac.
Now I need to change my computer name & I can not do it!
Can anyone help me please.
Thx

Thank you it helps now I can see from my other devices my computer name as I wished.
But when I open finder & I go to places still the old name exists. I tried to change it but a message shows telling that this name can not be changed cause it is required by Mac os.
Can U please help me to change this name 2.
Thanks again

Can I change my computer name?

Hello all,
I just replaced my Power G5 with a Mac Pro, however, the computer name of the new Mac Pro is quite too long, therefore I am thinking to change it.
I have not set up the network connection yet with my other computers at home. Do I have any risk by changing the name?
Thank you in advance

You can change the computer name in the Sharing system preference. There should be no negative consequences.

How to change your 'computer name' ?

I have just 'migrated' ( using the software install - by a firewire cable ) from my old PowerBook G4 to a MacBook Pro - Everything is fine except now my MacBook Pro is called PowerBook G4 15" on the start-up screen and system profiler title.
My question is how do you change this 'computer name' ?
Many thanks in advance.
Ti-Powerbook/MacBook Pro Mac OS X (10.4.9)

You can change your computer name in System Preferences (found under the Apple menu) in the Sharing pane. At the top of the pane it will say Computer Name: PowerBook G4 15".
Note that the name can contain spaces. Mine, for example, is Ministry of Magic.
Delete the current name and enter the new name. Note that you do not have to click the edit button out to the right. That is only useful if you want to change the bonjour address on your local subnet to be something different from NewComputerName.local (where NewComputerName is the new name you just changed it to.
Hope this helps. Good luck.
PM G5, PB G4 17", iMac G5 20", iPod 5G 30GB, iPod Nano 1G, iPod Shuffle 2G Mac OS X (10.4.9) AirPort Extreme (802.11n) WDS with AirPort Express

I am unable to change the computer name.

I am unable to change the computer name of my MBP 9.1.
When I edit the computer's name in settings/sharing the name reverts to
the old name of Bill's MBP (2). I am attempting to delete the (2) portion of the name.
This along with a 27" iMac and a MBP 7.1 are networked wirelessly
through a older AP extreme. What am I doing wrong?

I finaly took the MBP to the Apple Store.
While waiting for the genius, I kept trying to
change the MBP's name in sharing. After trying
several things, control-enter worked. I have no idea why.
The reason I'm posting this is that the genius
reminded me that I could not be certain the change
took until I restarted the MBP. I hadn't seen this
important step before and some may not be aware of this.
I suppose this applies to any change made on your Mac.

What modifications to be done after changing the Computer name..?

Hi all...
What are the modifications to be done after changing the Computer name..(Hostname) to connect the oracle. When i am restarting the TNS Listener manually, it is giving Error 1067.
Please tell me, what are the modifications to be done, if i change the computer name.
Thanks in advance,
Pal

You need to change your hostname/ip in listener.ora

Can I change the COMPUTER NAME of Windows Server ?

Hi all,
Is it possible to change the Computer Name of the Windows Server 2008, if Yes, what's the effect on all terminal profile on each station?
** We have many station that accessing some files thru pipe name ex: \\MyServer\Data\ hard coded on program public folders on server, but the newly installed server was named "MyServer2" can just rename it back to "MyServer" without problems
on client station? " ***
Thanks ^_^y

Yes. You can change the name.
You need to update all reference to new server name. You can try creating an Alias in DNS as a co-existence option.
Santhosh Sivarajan | Houston, TX
Windows 2012 Book - Migrating from 2008 to Windows Server 2012
http://www.sivarajan.com/
This post is provided ASIS with no warran

How can I change my computer name

My work computer is named the previous person who had it who's not hear any more.
Now it says the name is: "his name - my name"
How can I change the name to just my name?
Thx,
Steven

Thanks Eric. I note a few differences though.
First there is no "Users & Groups" icon in the top level of System Prefs. However while exploring I found under "Sharing" you can change the computer's name there. One would think it's in Accounts, but it's not. I did add myself as an Admin when I first got here but that just appended my name with a hyphen to the previous employee name
So I changed Computer name to my name in the field in Sharing and then saw there's an Edit button. There you can change the lost hostname, whatever that is. I shouldn't do these things without knowing, I know, but I changed it but it doesn't allow spaces and adds hyphens. Since I have a Home comper, I named this work computer differently and hypens were added plus the suffix; .local.
There is a "Use dynamic global hostname checkbox which was unchecked so I left it that way. Do you know what the global hostname does and if I need to check it? What happens when you do?
Making the local hostname: my name-V1-Computer.Local, didn't change the Computer name field when you return to it. It still has the name I gave it before assigning the .local name.
But if I go into MM for example and then Advance to see which computers sync to MM, I see my home computer and work computer which is still named: previous emloyee's Computer - Steven Lastname (This Computer). So obviously the complete computer name hasn't changed.
The article you give above gets you to the Directory Utility in Utilities to change the Root info.
It says after open the lock icon: Enter an administrator account name and password, then click OK.
But the only thing to do in the main Directory Utility is: Add/configure a Directory server, again don't know what that does, but clicking it all you can do is set the drop down to: Open Directory or Active Directory, fill in the Server Name or IP Address field.
There are no fields for "enter admin account and pw" which I assume is me since I'm listed that way in Sys Prefs > Accounts, and the only Admin listed for this computer.
So I'm at an impasse. I don't see why this is all sy cryptic, but assume it's for security purposes. Well it's working. I can config my own computer
Am way of the beaten path? In a parallel universe? Or close?
Sorry for long email, but hopefully this will end up being a good tutorial for the next happless chap that can't rename his/her computer.

Changing host computer name

Similar Messages

Maybe you are looking for