Changing host name of JDI server

Hi,
during installation of JDI I used ip-addresses as host names for defining the domain host, the SLD server in domain definition, the dtr server URL in track definition, the CBS server URL in track definition.
I know that one shouldn´t use ip-addresses at all but we did have some trouble with the network infrastructure (DNS-Server, ...) at the beginning and the start of the project couldn´t be delayed.
Now, for any reason, the network department gave our server a new ip-address.
I then opened the CMS configuration tool and tried to change the host names (this time not to ip-addresses because DNS-Server works properly in the meantime).
Changing domain data is no problem. But when I try to save the changes of my track(s) I get an error message that says I should contact my administrator. I am the administrator
My Questions:
How is it possible to change the host names of JDI tracks?
What is to do at client side? There are already some developers working with the dev. configurations. Is it sufficient to change the according entries in the .confdef file or do the clients have to donwload the new dev. configuration from CMS host?
Thanks in advance
Helmut

Hello Helmut,
it should be possible to change the host names for tracks. You can get more error message details in the trace file of the Engine. To do so connect to your engine with the J2EE Administration Tool and check the defaultTrace.trc File in the Log Viewer.
For more details how to find this trace information have look into the Change Management Server Problem Analysis Scenarios (Link: http://help.sap.com/saphelp_nw04/helpdata/en/81/4bce4016d28031e10000000a1550b0/frameset.htm). In the first Scenario Incorrect Initial CMS Configuration you can also find the general information how to read and find the CMS trace files.
Please open a CSN message for the component BS-CTS-CMS if can not find the reason for the error message or if it is real problem in CMS.
Best Regards, Michael

Similar Messages

I want to change IP and Host Name of application serve

our application server is on IBM AIX platform and now i want to change IP and Host Name of application server?

Hi Again;
For Ip please see:
How to change the IP Address for a Release 11i Instance ? [ID 364099.1]
How to Change IP Address in an Oracle Applications Environment [ID 553318.1]
PS:Please mention your EBS version
Regard
Helios

Change IP and Host name of the server

Hi,
Db :11.2.0.3
Os:Aix6
OS team are going change IP address and host name of the server which has ASM and DB.
What are the things we need to follow for this?
Thanks & Regards,
VN

OS team are going change IP address and host name of the server which has ASM and DB.
What are the things we need to follow for this?1. TNSNAMES.ORA files everywhere
2. LISTENER.ORA on server
If there are thin JDBC clients, change IP/hostname in their connection URLs.

10.5 server changes host name when changed to be member of 10.4 OD Master

Hi,
I have a Xserve with 10.4.11. This is my working OD master hostname: AAA, FQDN: AAA.domain, realm DOMAIN. Now I have a PowerMac G5, hostname BBB, FQDN BBB.domain, where I install 10.5 server.
When it comes up as stand alone, the hostname is BBB (FQDN BBB.domain), but when I then connect it (as domain member) to my OD master, it promts me to say that "AAA" is a used hostname and that it changes hostname to" AAA (2)".
In my DNS it is still identified as BBB.domain, and it is bind to the realm as BBB.
Why does it act like this?
Subsequently I can't get kerberos to work and SMB does not want to be a member of the domain (always get back to standalone instead of becoming member of the domain).

Here comes a bit more on this one. I waited and maybe this had to do with having a OD master in Tiger and the OD member on Leopard. But now both are in Leopard. And things are the same.
I have thou been studying the Console after some tips. And I'm changing the host name in Server Admin/Network to BBB (what it should be). And it seems to work fine. Name of the server changes where supposed to (what I can see). And in Console I can se that the administration tool changes host name in a variety of places.
And now I wait.
If I do nothing (the network is pretty small), nothing happens. But after a while, I login with for example Remote desktop the followingapears in Console:
+Jan 3 12:58:02 emil mDNSResponder[30]: User updated Computer Name from AAA (2) to AAA+
+Jan 3 12:58:02 emil mDNSResponder[30]: afpovertcp.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: ssh.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: sftp-ssh.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: servermgr.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: rfb.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: ldap.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: net-assistant.udp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: adisk.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: User updated Local Hostname from AAA-2 to AAA+
+Jan 3 12:58:03 emil mDNSResponder[30]: Local Hostname AAA.local already in use; will try AAA-2.local instead+
+Jan 3 12:58:03 emil mDNSResponder[30]: afpovertcp.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: ssh.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: sftp-ssh.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: servermgr.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: rfb.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: ldap.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: net-assistant.udp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: adisk.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: User updated Computer Name from AAA to AAA (2)+
+Jan 3 12:58:03 emil mDNSResponder[30]: User updated Local Hostname from AAA to AAA-2+
+Jan 3 12:58:03 emil mDNSResponder[30]: mDNS_SetFQDN - hostname unchanged+
"AAA (2) to AAA" may as well be "BBB to AAA". But I'm very surprised over that the logg claims that "User updated Computer name..." For all I know, I haven't. And note in the middle here that the mDNSResponder changes to AAA (which indeed is used - it's the OD master!!!), discovers that the name is in use, and then changes to "AAA (2)".
But why does it at all initiate a change from AAA to "AAA (2)"?
Why can't I call the server BBB?

How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
Thanks in advance!!!
Sincerely yours
Sergey Bondarenko

Hi
Thanks for your attention for my humble problem.
I have performed Meeting Place Express configuration through the “net” command.
But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
Have you any idea?
A lot of thanks in advance!!
Sincerely yours Sergey Bondarenko
Here I have printed the net configuration output of Cisco meeting Place Express:
[root@cumpxvoice root]# net
This is the MeetingPlace Express network configuration utility.
Up to the point where you save changes, it is safe to hit ^C to get
out at any time, in which case nothing will have changed.
1) List current configuration
2) Configure Ethernet port 1
3) Configure Ethernet port 2
4) Configure service bindings
5) Set host names
6) Set domain name
7) Configure DNS service
8) Configure NTP service
9) Configure routing
10) Done
Select: 1
Primary/audio host name: cumpxvoice
HTTP host name:          cumpxvoice
RTMP host name:          cumpxweb
Domain name:             uclab.com
Service bindings:
Audio:                   port 1 (eth0)
Web browsing (HTTP):     port 1 (eth0)
Web conferencing (RTMP): port 2 (eth1)
Port 1 (device eth0):
IP Address:      10.62.60.116
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Port 2 (device eth1):
IP Address:      10.62.60.117
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Static routes:
Destination      Gateway          Network mask     Port
0.0.0.0          10.62.60.1       0.0.0.0          1
DNS Servers:
10.62.60.115
10.0.1.4

Changing Host Name in OCS 10.1.2

I have Installed OCS 10.1.2 on RedHat Linux AS 4.5 (x86) on HP-Proliant DL 180 G5 Server.
I want to configure Apache Server in OCS to launch a web site.
Can anybody guide me with the Apache Configuration,
I have tried but as my site name and Host Name are same i am unable to do it -
Is it possible to change the HOSTNAME on OCS ?
Some guidence on this issue will help me to proceed else i will have to re-install OCS.

Do changing host name effect in google PR update ?

Active Message When you have invalid host name in Proxy Server

I have an issue with one of our customers.
To communicate with any external parties, we have to define the host name in proxy server(Firewall).
I noticed that when we configure a WCF or HTTP adapter with an invalid host name of https url address, the messages remain active.
I am using ESB Toolkit in my implementation but I reproduced same issue using Orchestration with static port and dynamic port.
I traced the message using Fiddler and I noticed that we only have one hit with Status Code 407(407 proxy authentication required) and it is not retrying which is not a risk to my implementation. However, I consumed a web service using a console application
and I set an invalid host name for url but I noticed there are two hits in Fiddler one is 200 http status code and the second hit 407 http status code and I could catch the exception.
The question is: How to enforce BizTalk to suspend these messages or how to handle these messages?
Note that I did the followings trials but no lucks:
- I updated retry count to zero
- Delivery Notification of the Port is Transmitted
- updated closeTimeout, sendTimeout, openTimeout values
Thanks in Advance
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Hi Mohan,
You are getting "The remote name could not be resolved" because you are not using Proxy.
I tried to tweak on Retry Count(tried zero,1,2...). I am sure it is not retrying because there is not any network hits or packets in Fiddler or WireShark and messages stay forever.
ESB is not my issue because I reproduced same issue with a simple orchestration consuming a service with a static send port.
I have the following notes:
- In console application and Biztalk application using WireShark I can see same number and types of network packets in both cases.
- I tried to change https url to http with incorrect host name in this time retrying is working and message suspended after exceeding retry count.
- I tried to use https which is the required one with correct host name and change service name, I could see client OK Hello and server OK Hello and retying working fine and message suspended after that.
I think the issue with handshaking with proxy server because I could not see client Ok and Server ok hello when changing the host name.
There is another thread talking about an issue with active message and handshake.
https://social.technet.microsoft.com/Forums/en-US/736f0f72-ccc9-4a84-802a-7a1ff788a04a/ssl-2way-cert-incident-remains-active?forum=biztalkgeneral
But the question remains open that how we can handle this active message and why BizTalk not throwing an error?
Thanks,
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

HOW TO CHANGE HOST NAME AFTER SAP IS INSTALLED?

i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

As far as my understanding goes it can be done. The only problem is SAP is not recommending it. Still if you want to give it a shot please go through the link to learn more and step by step guidance.
[Click Here|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
Also take a look at this SDN thread, you might find something interesting.
[click here for SDN thread|How to change the hostname was set/defined in SAP system?;
Edited by: santra.anirban on Sep 13, 2010 10:45 AM

How to change host name or host ip in AIA after installation

Hi,
we have AIA11.1.1.5.0 and O2C PIP installed.
we need to change host name used in AIA to some different value.
Could you please suggest what all steps are required for this.
Thanks & Regards,
Bob

1) Make a full backup of your XI 3.1 system (both database and file repository)
2) Change the hostname
3) Create a new SIA with all defaults servers using the CCM. Make sure that you instruct the CMS to use the same database connection as before. I ould advise you to change the default CMS and SIA ports.
4) Run the "Update objects" command in the CCM on the new SIA
5) Stop the old SIA and change the ports for the new SIA and the CMS to the default values (if required)
6) Remove the old SIA in the CCM
7) Go into to the CMC and try to delete any remaining servers from the old SIA.
Please note that after completing the above workflow you have to reconfigure some of the servers' settings again in the CMC
Regards,
Stratos

How to change host name for SLD

Hi All,
How is possible to change host name of SLD configuration?
I want to change my portal host name used for SLD configuration from aaa.bbb.net to aaa.ccc.net.
How can i do it?
Thanks a lot!
Alex

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

How to change host name for management agent.

Hi,
I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
I know how to change port number, but I've no idea how to change host name.
Have you got any idea?
Thank you in advance.
Matin

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

Change display name of the server under Equipment

is it possible to change the display name of the LIVE / PRODUCTION blade under equipment --> Chasis -->Servers to our own naming standards.
Attached is the screenshot of current names.
UCS Manager Version 2.1(3a)

Azmathulla,
It is not possible to change the name of the server, but you can add a label to it (see attached screenshot). And yes, it can be done during production hours, this doesn't affect the production data.
Please let me know if this answers your question.

How to get the Host name of Unix server

Hi all,
I am need to use the Host name of application server for some purpose.
where can i see the host name of the unix server ?

SYST-HOST or SY-HOST contain the name of the application server.
You may also use the following internal call to get the actual application server
call 'C_SAPGPARAM'
     id 'NAME' field 'rdisp/myname'
     id 'VALUE' field servername.
For the IP adress
CALL FUNCTION 'DB_DBRELINFO'
    IMPORTING
      dbinfo = dbinfo.
READ TABLE kernel_version INDEX 11.
kinfostruc-ip_address = kernel_version-data.
Regards

MAY I CHANGE HOST NAME AFTER SAP IS INSTALLED?

i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

Hi,
Do not change the hostname after the installation, if you need to then you have to perform system copy.
Refer: Note 8307 - Changing host name on R/3 host: What do you do?
Regards,
SBK

Getting ipaddress or host name for virtual server

I want to get the ipaddress or host name for virtual server in a cluster environment. If i do
java.net.InetAddress.getLocalHost().getHostName()
it returns the ipaddress of the physical node currently running virtual server.
Is there any way to get the ipaddress or host name for virtual server ?

You can get the hostname by clicking on the account properties in outlook, but the port you connect to must be opened by your system admin.

Changing host name of JDI server

Similar Messages

Maybe you are looking for