Changing hostname to Virtual ip hostname in weblogic (FMW)

Hi,
Can anyone let me know how to change the weblogic hostname to viphostname?
Regards,
RKA

Go to admin console --> servers --> server name --> Listen Address. Set your listen address here to vip hostname and try restarting the server.
If the viphostname you provide is already available on the network interface cards on the machine on which the weblogic server is suppose to run, then your server will start.

Similar Messages

What needs to be changed if we change hostname in linux

Dear all,
I have a question and will appreciate for appropriate answer(s).
My machine name was lxcms120.cern.ch and Oracle 10g DB was running fine on it (listener, DB, Enterprise Manager). It is not a production system rather a test system.
Now, i changed its name to docms11.cern.ch
I change hostname in listener.ora & tnsnames.ora and listener started successfully.
I started db from sqlplus and it started without any complaints.
Now, when i tried to start Enterprise Manager (emctl start dbconsole), it didn't and return this error.
OC4J Configuration issue. /localscratch/orahome/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole_docms11.cern.ch_oralxcms120 not found.
Now, i know that when the machine name was initially lxcms120, it was /localscratch/orahome/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole_lxcms120.cern.ch_oralxcms120
and if i go to that directory, i could see OC4J_DBConsole_lxcms120.cern.ch_oralxcms120 but of course there is no OC4J_DBConsole_docms11.cern.ch_oralxcms120
My dbname instance is oralxcms120 and has nothing to do with hostname.
So, what is the solution to the problem. Moreover, are there any steps to do while changing hostname of the oracle database like in my case which i can follow to make all required changes.
Best regards,
Anjum

You will need to do a little more than just directory rename,
From Oracle document,When the database host name (including the domain name) or the IP address changes, deconfigure and then reconfigure the Database Console with the repository create command. Run the following command:
emca -deconfig dbcontrol db -repos drop
emca -config dbcontrol db -repos create
or
emca -deconfig dbcontrol db
emca -config dbcontrol db -repos recreate
http://download.oracle.com/docs/cd/B19306_01/em.102/b40002/structure.htm#CACBBFGI

How to repair Open Directory Master after Changing Hostname

Summary:
How to repair Open Directory after Changing your Server's Hostname (see separate post)
Problem:
I had to change our server's hostname from a private hostname (server.name.private) to a public hostname (name.dyndns.org).
Procedure:
1. Precautions:
Since I was anticipating major dramas I tested the change of hostname on a clone ( I used Super Duper, and I very strongly advise everybody to heed this warning because a change of hostname will corrupt your server services, in particular Open Directory)
Second, I exported the network users from Server Admin and copied the archive to the Drop Folder of the server's local account (because the network accounts will be unavailable after demoting the OD Master.)
2. Change hostname and demote OD Master
a) I re-booted the server from the clone
b) I changed the hostname in Server App and I noticed that the Open Directory Password and the Kerberos database were still stuck with the old hostname.
c) I then demoted to a standalone directory (Server Admin) and I tried to promote the server to an OD Master using the Server App (Manage Network Accounts). Server App always returned an error saying I should check my network settings.
3. List of 'fixes'
I tried the following fixes to no avail (which does not mean that you can skip them)
a) I checked the DNS entries, forward and reverse were working fine (sudo checkip -changehostname)
b) Checked with Lookup in Network Utility, all was fine
c) I deleted all system certificates (Keychain) which showed the name of the previous hostname
( N.B. you need not delete email certificate and private/public keys)
d) I tried to assign a new static IP in Networking Preferences (had no visible result)
e) I re-booted from the working drive and I re-paired permissions on the clone; I ran disk repairs.
Despite all this I could not re-create an OD Master.
I then looked for this dubious folder /var/root/Library/Application Support/Certificate Authority.
I could not find this folder when using the Finder's Go To Folder, nor did "Easy Find" see this folder.
I was about to give up when I read the posts on this page and I entered the Terminal commands
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
I had not much hope when I set about to re-create the OD Master from the Server App.
But lo and behold !!! I did not trust my eyes when Server App claimed that the OD Master had been successfully created. And indeed, Server admin showed a running OD Master, LDAP, Kerberos and Password Server all running again !
Final touch: re-import the user accounts.
Epilogue:
I woud not have been able to fix this issue had not so many others shared their experience and the working solution.
(Refer : https://discussions.apple.com/thread/3219325?start=0&tstart=0 )
Thank you all !
Let's hope that Apple will fix this annoying issue in the next server update.
Regards,
Twistan

Hi Rhyan,
Please try clearing the security cache
http://www.sharepointanalysthq.com/2014/05/active-directory-groups-and-sharepoint-security/
https://sergeluca.wordpress.com/2013/07/06/sharepoint-2013-use-ag-groups-yes-butdont-forget-the-security-token-caching-logontokencacheexpirationwindow-and-windowstokenlifetime/
http://webactivedirectory.com/active-directory/windows-active-directory-cached-user-credentials/
Please remember to click 'Mark as Answer' on the answer if it helps you

Changing hostname on Callmanager 6.1 and generate new SSL

I'm looking to change the hostname of our Callmanager because of a change in the naming convention for all our servers.
Is it as easy as it seems or are there any precautions I need to be aware of?
My thoughts were to just Change hostname under Cisco Unified CM Configuration for both PUB and SUB
Since I use mostly IP address for most of my configuration, are there anything else I need to be concerned about?
Also, how do I generate a new SSL cert based on this change so admins and users won't get a certificate mismatch prompt?
Thanks!

Hi Ken,
Thought you might want to see this
CSCtf23432 Bug Details Bug #11 of 38 | < Previous | Next >
CUCM Hostname change does not update self-signed certificates
None
Symptom:
After a hostname change, self-signed certificates are not regenerated. Web browser may indicate
that the CUCM certificate is not valid.
Conditions:
hostname change procedure.
Workaround:
From the os admin page:
1) security->certificate management
2) select "find"
3) for all the self-signed certs (identified by the description field),
select regenerate.
Further Problem Description:
n/a
Status
Fixed
Severity
3 - moderate
Last Modified
In Last Year
Product
Cisco Unified Communications Manager (CallManager)
Technology
1st Found-In
7.1(2)
Fixed-In
8.0(2.98000.25)
8.0(2.10000.4)
7.1(4.98000.167)
8.0(2.98000.31)
8.0(2.10000.24)
7.1(5.10000.12)
Cheers!
Rob

Change hostname/domain in ebs 12.0.6

Hi All,
I have single node installation of EBS R12 (12.0.6) and database version is 10.2,
I want to change hostname and domain name of application and database.
I have found this document (ID 341322.1). i think this document is for EBS 11i ,
may i follow this document on EBS R12 ?
Thank & Regards
Ravi Kumar

Hi Ravi,
Please have a look at the following notes, applicable to r12:
How to change the hostname and/or port of the Database Tier using AutoConfigNote (338003.1 )
How to change the hostname of an Applications Tier using AutoConfig (341322.1 )
You may follow link:
CHANGE HOSTNAME OR IP-Address OR DOMAIN NAME ON APPS-TIER OR DB-TIER in R12
http://applicationsdba.blogspot.com/2011/04/r12-iphost-name-change.html
Additionally, 2nd step would be..
- Run preclone script on DB and Apps Tier
- Change network necessary changes
- Run the post clone script.
Hope this helps!
Best Regards

Cluster changing hostname & Logical host

hello I have sunCluster 3.1 update 4.
the cluster is 2(v440) + 1(v240) installed on solaris8.
Did anyone actualy succeeded to change the hostnames of all the nodes & Logical host on SunCluster system like above?
I saw a procedure that is not realy supported :
1. Reboot cluster nodes into non-cluster node (reboot -- -x)
2. Change the hostname of the system (nodenames, hosts etc)
3. Change hostname on all nodes within the files under /erc/cluster/ccr
4. Regenerate the checksums for each file changed using ccradm -I /etc/cluster/ccr/FILENAME -0Reboot every cluster node into the cluster
is it works?
Thanks & Regards

So if I understand you correctly, you have two metasets already created and mounted. If so, this is a fairly tricky process (outlined from memory):
1. Backup your data
2. Shut down the RGs using scswitch -F -g <RGnames>, make the RGs unmanaged
3. Unmount the file systems
4. Deconstruct the metasets and mediators
5. Shutdown the cluster and boot -x
6. Change the hostnames in /etc/inet/hosts, etc
7. Change the CCR and re-checksum it
8. Reboot the cluster into cluster mode
9. Re-construct metasets and mediators with new host names
10. scswitch -Z -g <RGs>
If you recreate your metasets in the same way as they were originally created and the state replicas haven't changed in size, then the data should be intact.
Note - I have not tried this process in a long time. Remember also that changing the CCR as described previously is officially unsupported (partly because of the risks involved).
Regards,
Tim
---

Oracle 11.2 standalone grid infrastructure - change hostname

Hi
I have changed hostname of my server running RHEL 5.3 with Oracle 11.2 Grid Infrastructure (standalone). After I changed the hostname of the server, the crs daemon stopped working and I cannot connect to my +ASM instance any longer.
In Oracle 10g2it was enough to run localconfig delete, localconfig add
What should I do in 11.2 ?
Thanks for help
Groxy

Hi Groxy,
I recently found myself asking the same question and after a fair amount of digging around I found a way to do it. Your question is now a few months old, so maybe you have found the solution already, but if not the key is using roothas.pl rather than localconfig. I have written a brief blog post covering the approach I used, so please check that out if you want more information.
[http://oraganism.wordpress.com/2009/12/20/11-2-changing-hostname/|http://oraganism.wordpress.com/2009/12/20/11-2-changing-hostname/]
I hope this helps.
Martin

How to disable auto-changing hostname?

I set my computer a hostname (let's say "MyComputer"), but when I connect to wired network, it changes hostname to whatever reverse DNS IP lookup turns out (let's say "Workstation312").
I know I can change the hostname using "hostname" in terminal- but is there a way to disable auto-changing hostname?

Hi,
Please try the steps in the following thread to see whether it could help:
Remove IE10's “clear field” X button on certain inputs?
http://stackoverflow.com/questions/14007655/remove-ie10s-clear-field-x-button-on-certain-inputs
Regards,
Vincent Wang
TechNet Community Support

R12 Change Hostname

hi,
I want to change hostname of R12 Database and Application servers
Ebiz R12 is running in 2 RAC DBtier and 2 appstier
Can anyone share a documents on how to configure this
Can this be done without a downtime?
regards,
rose

Hi,
You will have to follow the steps in these documents (it is applicable for 11i and R12).
Note: 338003.1 - How to change the hostname and/or port of the Database Tier using AutoConfig
Note: 341322.1 - How to change the hostname of an Applications Tier using AutoConfig
Regards,
Hussein

Change hostname of MaxDB server.

Dear All,
I want to change hostname of MaxDB server.
For the Oracle, some parameter should be changed. (ex.listener file).
What about MaxDB?
Regards,
Kim

Hi,
this link may help you...
[Hostname change on R/3 hosts running SAP DB or MaxDB.|Hostname change on R/3 hosts running SAP DB or MaxDB.]
AND
[http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
Regards.
Rajesh Narkhede

Error (23317) The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks. Recommended Action The operation Change properties of virtual machine is not permitted on a virtual machine that h

Experts !
Error (23317)
The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks.
Recommended Action
The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks.
Is this limitation by design? If we have a shared VHDX between two VMs, then I am not able to change the VM properties from SCVMM.
SCVMM 2012 R2 with Windows Server 2012 R2 Hyper-V.
Appreciate any help !
Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
InsideVirtualization.com

Hello,
that is a VMM issue.
If you did not deploy your virtual cluster from a VMM service template, VMM doesn't recognize the configuration.
Until MS got it fixed, you could use the workaround from system center central:
http://www.systemcentercentral.com/tag/shared-vhdx/
This posting is provided >AS IS< with no warranties.

How to setup alias or virtual dirs in the weblogic webserver

Hi
I am trying to setup alias or virtual dirs for my images. How do I do that in
Weblogic webserver. I am currently using 6.1. My JSP's also may reside in a virtual
directory. Can weblogic handle that or should I deploy them under the web application.
Any pointers
Vasu

BTW use google:
http://groups.google.com/groups?as_q=docHome&safe=off&ie=UTF-8&oe=UTF-8&as_ugroup=weblogic.developer.interest.*&lr=&hl=en
cheers
mbg
"Mark Griffith" <[email protected]> wrote:
>
I think for 6.1 you need to register the FileServlet (weblogic.servlet.FileServlet)
in your webapp with docHome as an init parameter. Where docHome points
to the
rootnode you want to map. Not too sure.. and I haven't tested it.
In 7.0 you can use virtualmapping in the weblogic.xml
http://edocs.bea.com/wls/docs70/webapp/weblogic_xml.html#1037236
Cheers
mbg
"Saran" <[email protected]> wrote:
Hi,
Did you get the answer for your question(creating alias or virtual
directory).
could you share the answer with me.
my mail id is [email protected]
Thanks in advance,
Saran.
"Vasudev Krishnamoorthy" <[email protected]> wrote:
Hi
I am trying to setup alias or virtual dirs for my images. How do I
do
that in
Weblogic webserver. I am currently using 6.1. My JSP's also may reside
in a virtual
directory. Can weblogic handle that or should I deploy them under the
web application.
Any pointers
Vasu

Change OEM to virtual hostname from physical hostname.

Hi,
we access our OEM using physical hostname. It has been working like this from some time now. Is it possible that now we change physical hostname to virtual hostname i.e. we want to access OEM via virtual hostname.
We are concerned about the high availability of our OEM. so in order to install multiple oms homes on different servers we need to have first OEM running on virtual hostname. what changes we need to make on OMS side ?
Let me know if more information is required on this. We are on 10.2.0.3 grid control running on sun solaris and some 100 targets added to it.

See the Advanced Configuration Guide at http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b40002/toc.htm
Also, you may want to view the MAA doc here http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gR2_EnterpriseManagerBestPractices.pdf.
Hope this helps.

How to change hostname on NetWeaver 2004s NW (Win2k3 + MSSQL)

Hi,
I'm a Virtualization expert @SAP IT. I was aked to provide a solution for hostname change process for cloned virtual machines. Here, i'm posting my solution but use it on your own risk and sideeffects can appear too (applicable to NW 2004s - don't know about side effects till now).
1. Change your hostname to a new one (newsid for clonned) and stop SAP services with prefix SAPXYZ_AB
2. open the c:\Windows\System32\drivers\etc\hosts file and add your previous hostname at the end of 127.0.0.1 line:
    127.0.0.1       localhost      youroldhostname
3. Use sql enterprise manager (or other SQL tool) in order to connect NW's database.
4. NW's database is a database with a SAP systemID - XYZ and locate J2EE_CONFIGENTRY table
5. Open a query window and check the following SQL Query for previous appearances of your hostname
SELECT     *
FROM        J2EE_CONFIGENTRY
WHERE     (UPPER(VSTR) = 'YOUROLDHOSTNAME-WITH-CAPITAL-LETTERS')
6. If this query returns results - run the following SQL update command
UPDATE    J2EE_CONFIGENTRY
SET              VSTR = 'NEWHOSTNAME'
WHERE     (UPPER(VSTR) = 'YOUROLDHOSTNAME-WITH-CAPITAL-LETTERS')
7. if step 5 failed try to run query w/oout where statement
Best regards,
Boris Mikhailovski
System & Software engineer
Message was edited by:
        Boris Mikhailovski

> I'm a Virtualization expert @SAP IT. I was aked to provide a solution for hostname change process for cloned virtual machines. Here, i'm posting my solution but use it on your own risk and sideeffects can appear too (applicable to NW 2004s - don't know about side effects till now).
Just as addition:
"Officially" it's not supported to rename instances, this is especially true for Java instances:
Note 757692 - Changing the hostname for J2EE Engine 6.40/7.0 installation
<...>
This note should be applied only when the hostname of a machine where the j2ee engine was already installed has changed. It does not replace the SAP official system copy procedure and MUST NOT be used for copying of an instance to another host and/or with different SID.
<...>
Markus

Change hostname and IP-address by a script

Hey!
I want to migrate a collaboration suite from a standalone machine to a virtual machine. Their I need to change the hostname and the IP-address from the whole collaboration suite.
My question is: Is it possible to change the hostname and the IP-adrdress and if yes! Is their any script from Oracle which I could use?
By the way: I use the same host configuration as before (SLES 9) and have a FULL environment backup.
Thanks ahead..

Hi, try to look here:
http://download-uk.oracle.com/docs/cd/B25553_01/collab.1012/b25490/ch_changing_netconfig.htm#BHBBJEBF
and here:
http://download-uk.oracle.com/docs/cd/B25553_01/collab.1012/b25490/ch_backing_up.htm#i1010667
You can change the ip address but you can't change the hostname

Changing hostname to Virtual ip hostname in weblogic (FMW)

Similar Messages

Maybe you are looking for