Changing hosts, artwork and podcast description.

I currently have a podcast on iTunes that was until recently hosted using Audio Acrobat. I've discontinued that podcast and will be starting a new podcast using Blog Talk Radio (BTR) as my new host.
The new podcast on BTR will be different in brand and scope than the old/existing podcast. What I want to do is change the artwork, description, delete the old shows (that seems easy enough) and yet keep the existing iTunes feed.
Is it as easy as entering the existing iTunes feed that I have into the spot where BTR asks for it, or do I need to submit a new RSS URL to iTunes and start over with a new feed. The BTR people were not able to help on this.
Also, just how does a person update the podcast info if they're not going to this extreme? Does it automatically update if you change it on the host page at BTR, or wherever one might host?
Thanks!
Dave

iTunes takes all the information from the feed. If you keep the feed at the same URL, change the title and all the episodes, then after a day or two the changes will be reflected in the Store (just as episodes can be added and others removed without having to resubmit, you just change the feed).
If you wanted to move the feed to a different server while keeping the podcast the same, there is a definite procedure for this:
http://www.apple.com/itunes/whatson/podcasts/specs.html#changing
Note that this entails leaving the old feed in place until the change has been registered.
If you want to change the name and scope of the podcast, and change the feed URL, then frankly you will find it easier to start over from scratch and submit the new feed as a new Podcast.

Similar Messages

How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
Thanks in advance!!!
Sincerely yours
Sergey Bondarenko

Hi
Thanks for your attention for my humble problem.
I have performed Meeting Place Express configuration through the “net” command.
But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
Have you any idea?
A lot of thanks in advance!!
Sincerely yours Sergey Bondarenko
Here I have printed the net configuration output of Cisco meeting Place Express:
[root@cumpxvoice root]# net
This is the MeetingPlace Express network configuration utility.
Up to the point where you save changes, it is safe to hit ^C to get
out at any time, in which case nothing will have changed.
1) List current configuration
2) Configure Ethernet port 1
3) Configure Ethernet port 2
4) Configure service bindings
5) Set host names
6) Set domain name
7) Configure DNS service
8) Configure NTP service
9) Configure routing
10) Done
Select: 1
Primary/audio host name: cumpxvoice
HTTP host name:          cumpxvoice
RTMP host name:          cumpxweb
Domain name:             uclab.com
Service bindings:
Audio:                   port 1 (eth0)
Web browsing (HTTP):     port 1 (eth0)
Web conferencing (RTMP): port 2 (eth1)
Port 1 (device eth0):
IP Address:      10.62.60.116
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Port 2 (device eth1):
IP Address:      10.62.60.117
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Static routes:
Destination      Gateway          Network mask     Port
0.0.0.0          10.62.60.1       0.0.0.0          1
DNS Servers:
10.62.60.115
10.0.1.4

Change Host Name and IP Address on machine running WLS 9.2

Hello,
I am new to this community, so please forgive any unintended missteps.
I have an installation of BEA WebLogic Server 9.2 running on Windows 2003 Server SP2. This installation is running on a virtual server, which was created using some VMware product that copies or clones production environments. The purpose of this new, cloned environment is to act as a development environment. This new DEV server has a different host name and IP address from the source PROD server.
WLS is not starting up properly. It complains about the license.bea file not being valid. To try to fix that, I manually changed the IP address listed within that file, from that of the original system to that of the current system, but that did not change the error message I get during startup.
I imagine that this instance of WLS needs to be re-licensed to account for the change in IP address. Besides that, are there any other configuration parameters in text files, registry settings, etc., that need to be modified in order to allow the new instance of WLS to work the same as the old instance?
Please note that we want both DEV and PROD to run simultaneously, so we need to take steps to ensure they (and the applications running on WLS) don't talk to each other.
I tried to search the BEA sites and found a few resources, but related to some other products (ALES?), not WLS.
Thoughts, suggestions, feedback, or pointers to documentation would be greatly appreciated.
Thanks,
JPG.

Hi JPG,
The BEA license files are tied to IP address. Editing the license.bea to change the IP address file will not work.
Any reason why you cannot use a 5 user dev license for your environment?
If you break the 5 user limit then use IIS or Apache to front-end the the WLS instance.
Cheers
Mike

Apps 11i , Need to change Host Name and Domain Name after Install

Hi,
I have installed 11.5.10.2 on Windows. Now I need to change the Host and Domain of the instance.
Please advise.
Regards
Tauseef

Hi,
Please refer to:
Note: 338003.1 - How to change the hostname and/or port of the Database Tier using AutoConfig
Note: 341322.1 - How to change the hostname of an Applications Tier using AutoConfig
Regards,
Hussein

How to change the author and "podcast website," in iTunes store?

Hi,
my itunes store page is http://itunes.apple.com/gb/podcast/the-fallacy-a-day-podcast/id469610386 and my podcast is hosted on a free account at Podomatic.
It seems that the information on that page is drawn from the data on my Podomatic feed, including the "iTunes" page in my Podomatic account. All I ever did on iTunes is to go into the store section of iTunes and submit the rss URL.
I've read the FAQ but can't see how to change these features of my iTunes store page:
1. On my itunes store page the title is: "The Fallacy-a-Day Podcast By The Fallacy-a-Day Podcast" but I would rather it be "The Fallacy-a-Day Podcast by fallacaday.com"
2. Also on that page, under "Links" on the right, if you click Podcast website it takes you to fallacyaday.podomatic.com but I would prefer that iTunes store visitors are directed to my podcast's home page at fallacyaday.com.
As it stands, my homepage is being completely bypassed by some downloaders (although I do mention it in the podcast episodes themselves) and I have no metric on how many people are downloading the podcast. My Google Analytics indicate a constant number of visitors each day while the Podomatic bandwidth usage is increasing. I have no idea of what proportion of downloaders are doing so on Podomatic vs iTunes. Podomatic's own statistics (for the free account) are almost totally useless because they oscillate wildly from one day to the next.
Thanks to anyone who can offer help on these two questions!

Everything in the iTunes Store about your podcast is carried in the feed: the title is in the 'title' tag and the link in the 'link' tag. Although I'm not familiar with Podomatic my understanding is that you don't have access to the feed yourself, but have to set the details within Podomatic.
It should be easy enough to change the title by changing it wherever you originally set it. As to the link, I've seen others complaining that it directs to the podomatic site and can't be changed. Obviously they want to attract attention to their own service. I imagine this can't be changed but it's something you would need to take up with Podomatic.
Even if you had the correct link most visitors probably won't bother with it. If they are interested they will subscribe to your podcast in iTunes and listen to the episodes there - there's no reason to go to the site. iTunes does not provide usage statistics, and visits to your website aren't really relevant.
I'm afraid that the problem with all these online services is that they are what they are - they make it easy to get a podcast up and running but the facilities they provide may not always be exactly want you want and can't be changed.

Change host name and url of Oracle Application

Hello, I need help in changing the url of Oracle Application
OLD url - http:// appssvr.XYZ.com:8007
NEW url - http://erp.XYZ.co.in:8002
Please help

Richa wrote:
Hello, I need help in changing the url of Oracle Application
OLD url - http:// appssvr.XYZ.com:8007
NEW url - http://erp.XYZ.co.in:8002
Please helpOr, you could use Rapid Clone -- Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
Run preclone, change the hostname at the OS level and in the hosts file then run postclone.
Remember to clean FND_NODES table as per (How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]). You may also need to run cmclean.sql as per (Concurrent Processing - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables [ID 134007.1]).
Thanks,
Hussein

Changing Infoobjects Short and Long description on mass level

Hi,
We are trying to change the descriptions for infoobjects on mass level. We dont want to change the same in dev system and transport since its not feasible to check the consistency of the objects.
Kindly let us know if there is any other alternative for the same.
Thanks,
gaurav

Hi Siggi,
We tried changing the description using this function module and it worked in our DEV system. The concern here is when we check the attribute for this SAP standard function module it shows status "Not Released" under General Data tab.
Can we follow this appraoch as we could not find any other impacts since it changes only the text part of infoobject.
Thanks for the inputs!!
Regards,
Gaurav

Changed hosting company and blog no longer allows comments to be left

Since Mobile Me will no longer be hosting websites I have jumped the gun and purchased hosting from domain.com. Now the blog area i had that was able to leave comments no longer allows comments. Is there a way to fix this

Blog comments were a MobileMe only feature so there is no way to fix it in iWeb when you then publish your site via ftp - you can't get the blog comments full stop.
What you can do though is use a comments system like http://www.intensedebate.com which is free. Incorporate this where you want your comments to appear.
Either this or you change your blog to WordPress or http://www.posterous.com and create a link from your site to your new blog.
These are your only options really.

Changing track speeds and podcast to mp3 conversion

Two parts to this:
1)I am learning Spanish and have several podcasts in the language for which I would like to slow down the speech slightly (without affecting pitch) is there anyway of doing this without converting the file?
2) I am sure this is possible with a standard mp3 file. Is there a way to convert a podcast into standard mp3 format? and any suggestions of software that will perform the task above.
shuttle Windows XP

http://homepage.mac.com/major4/
http://www.hairersoft.com/Amadeus.html
http://www.freeverse.com/apps/app/?id=5012

Podcast description gone in iTunes

I created the website for my podcast in iWeb, and then uploaded it to iTunes. Everything went fine, until somewhere along the process the "podcast description" in iTunes disappeared. Is it possible to fix this? I think I understand the problem, as at one point I messed with the first paragraph on the "podcast" page in iWeb. This is the paragraph that iTunes turns into the podcast description.
Basically, I'm just wondering if anyone knows how I can manually change or fix the podcast description in iTunes using iWeb.
Thanks,
henroast

These text are usually stored in an XML file.
On your webserver/iDisk, navigate to the podcast page and see if there is such file. Open it in an texteditor and find the tag where the description should be.
It should look like:
<item>
<title>Title</title>
+<itunes:author>Your Name</itunes:author>+
+<itunes:summary>A short description.</itunes:summary>+
+<enclosure url="http://url/to/sound.mp3" length="600000" type="audio/mpeg"/>+
+<guid>http://url/to/sound.mp3</guid>+
+<pubDate>Fri, 01 Jun 2005 10:20:00 CET</pubDate>+
<itunes:explicit>no</itunes:explicit>
<itunes:duration>0:12</itunes:duration>
+<itunes:keywords>one two three</itunes:keywords>+
</item>

Conditional Header and Footer description print in Report

Hello,
Is it possible to print different header or footer of a report depend on condition.
My requirement to change the header and footer description on a fly depend upon the parameter passed to the report.
Any soultion ...
Sam

hello samar
of course this is possible. paint your first desidered header/footer, place it in frame and add format trigger on this frame to display it when you want it, otherswise return false. the same is for other possible headers/footers. then place all those frames on same position. look at conditions to display only one header/footer at a time :)
or seccond (in case of simplier structure) is to place in header/footer only one bolierplate text with value f.e. &p_footer and then send value you want to see in footer n parameter p_footer ...
hth
Petr Valouch, Brainbench MVP for Oracle Programming, http://www.brainbench.com

Can't change music artwork!

A few albums in my Music Library have wrong artwork, so i tried to change it, but when i change the artwork and then restart iTunes, the artwork goes back to the previous one! Any sollutions?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Keywords and page description in Contriubte 4

I'm trying to change the keywords and page descriptions on a
site set up by our system administrator in Contribute 4. I can get
to the dialog box to update these items, but when I press the OK
button I get the error message "You cannot perform this action in
this region of the page.". What do I (or my system administrator)
need to do to allow me to update the page keywords?

I'm having the issue. Have you found a solution.(other than editing the export file)

Solution Manager 7 EHP1 - Chage Host name and IP Address

Dear All,
I have installed Solution Manager 7 EHP1 (ABAP+JAVA Stack) on Windows 2003 64bit and working fine.
I need to change HOST name and IP Address of the machine.
In SAP where I need to change or reconfig ?
Thanks in advance,
Nirav

Hello Nirav,
first of all: welcome to a big adventure!
There are some configurations you should face and prepare yourself before you change the hostname, or IP-Adress.
1. Be aware of the SMD-Agents. You should activate the Maintenace Mode in Diagnostics just before changing the hostname.
2. Do the changes in ABAP (profile parameters, transport configurations, RFC-connection settings, reorganization of table entries). The systemcopy guide is a good place for informations. Don't forget to recreate the trusted connections to and from the connected managed systems.
3. Do the changes in Java (use system copy guide for informations).
4. Every SMD-Agent in your system landscape must be reconfigured after you change the hostname and did the adjustments in ABAP and Java. Have look into the Diagnostics setup Guide for a detailed information about changing the conection parameters
5. If you are using a central DBACOCKPIT management in SolMan and Oracle, the TNSNAMES entry should be changed.
6. SAP likes to connect to SolMan, so the SAPROUTER entries schould be changed also.
7. Perhaps you are monitoring your system landscape with SAPCCMS Agents, then all agents in your landscape have to be changed in their configurations.
8. I have BI installed within SolMan and got an error page after changeing the hostname. Try this URL to make some corrections:
http://<hostname>:<Port>/webdynpro/dispatcher/sap.com/tcsmde2ewa/E2ewaConfig
Changing the hostname of SolMan isn't a small job and done in 60s. I suggest a detailed planning and to make a roadmap of all doings.
Have a lot of fun!
Sascha

E-books and podcasts in french and NOT automatically in german in Switzerland

How to get e-books and podcasts in french and NOT automatically in german, even living in Switzerland, but in the french part of Switzerland?
In Switzerland, 70% speak german but there is a large part speaking french.
As I am living in the french part of Switzerland, I speak french and NOT german. How to change my ebook and podcast applications from german to french? I don't want to see a book or à podcast in german anymore on those apps. In french, please! Or possibly in english. But NOT in german.
Thank you in advance and kind regards.

This is a user to user forum. You are not addressing Apple here, but you can offer feedback here: http://www.apple.com/feedback/.
However, Apple does not control the laungages that e-books or podcasts are published in for a given itunes store. That is up to the publisher. Perhaps you should reach out to them.

Changing hosts, artwork and podcast description.

Similar Messages

Maybe you are looking for