Changing hyperlink color and format in numbers 3

Hi all!
I want to change the automated color (and format: underline etc.) that is assigned to hyperlinks.
In my file I use vlookup to get the email and webadresses from a different source table. In the source table, I've tried disabling the hyperlinks and give different colors. In the destination table (different sheet), it keeps reformatting the @'s and www to hyperlinks. Smart link substitutions are off..
Manually changing the text color in the destination cell doesn't work, probably because of the vlookup formula?
hope you guys can help me out, thnx in advance!

Hi Eliakim,
Turning off Smart Link Substitutions does not 'kill' existing active hyperlinks. It prevents the automatic conversion of an address that is subsequently typed or pasted.
I pasted an active hyperlink into a Numbers cell, and it remained active even though Smart Link Substitutions was off.
When I did Menu > Edit > Paste And Match Style the hyperlink was not active.
Try this. In your source table, select and copy the hyperlinks. While they are still selected, Paste And Match Style. They will still appear to be hyperlinks (blue text underlined) but will be inactive (I assume that is what you want).
See what that does to the text inserted by vlookup in your destination table.
Regards,
Ian.

Similar Messages

  • Hyperlink color and publishing wierdness

    I've used the tutorial at 11Mystics to change hyperlink colors in my blog templates and in the existing pages. In each case, I made the changes one at a time and then checked in iWeb to make sure they worked. Every page displayed in iWeb exactly as I wanted.
    Then I published all to .Mac. Viewing the blog entries in Safari, some of the links appeared blue while others were still the default gray. In at least two blog entries this is true within a page - some are blue some are gray. I tried recreating those pages thinking that the newly edited template would fix it. Again, in iWeb everything appeared fine but in Safari the same result. I cleared the Safari cache and relaunched with no change.
    Then it occured to me to check in Firefox. There all of the links are perfect. If this was as far as it went I'd attribute it to Safari problems. But I also checked using Firefox on my office PC and there most of the links are correct but a couple are still gray. So that is three different results. I'm very perplexed. The only thing I can think of is that in the two browsers where it isn't quite right, I've viewed some of these pages before whereas in Firefox on my Mac I hadn't (I rarely use Firefox on the Mac). On the PC and in Safari I've cleared the cache so I don't see why previous viewing would be an issue.
    In case anyone wants to have a look:
    http://web.mac.com/dmath/iWeb/Woodworking/Blog/Blog.html
    Choose the top entry. There should be three blue links. In Safari on my iBook only the first one (Bridge City Tool Works) is blue.
    I'd appreciate any help with this. Thanks.
    David
    Message was edited by: dmath

    More information: I just tried it on my kids' Mac Mini running an old version of Safari. All of the links display perfectly. It must be a cache issue. I'll have a look around on the Safari discussion board to see if I can find anything.
    David

  • How do I copy a document from pages into email (not pdf) and have color and format the same as the document created in pages?

    How do I copy an entire document from pages into email (not pdf) and have color and format the same as the document created in pages?

    Pages ’09 v4.3 and Pages v5.2.2 are entirely different document architectures. Consequently, copying and pasting a table from Pages ’09 circumvents the customary translation process  that would occur if you opened that Pages ’09 document in Pages v5.
    Make a backup copy of the Pages ’09 document that has the table in it, and then open this document in Pages v5.2.2. The table is translated into Pages v5 document format and displayed correctly. You can even select this Pages v5.2.2 table, and then copy/paste it into another Pages v5.2.2 document with accurate results.

  • Hover over image will change background color and size since IE8

    Hello,
    I have a problem that only occurs in IE8 without compability view.
    I have in CSS set all textlinks to change background color on hover.
    Now my sliced imageslinks also change background color and for a larger background area than the actual image.
    It filles out the area outside the sliced image.
    This hasnt happened before in any other versions of IE and it looks fine in Firefox.
    Please can some one help me !
    I have been searching net for hours.
    I tried to change the background color when hovering imagelinks. Maybe I did something wrong but it didnt help.
    BR,
    Peter

    Noone that can give me a clue?
    I have been trying to figure this out all day

  • Changing hyperlink color

    I've put a hyperlink on a blue background and want to make it white instead. I cannot figure out how to do this. (I do know how to change colors of everything else.)

    I recently discovered how to do this in iWeb & thought it might work the same in Pages. It doesn't, but I actually discovered it is easier. Select the text of the hyperlink & change the color of the text using the box on the format bar or the text inspector.

  • Make whole Text clickable (or change Hyperlink color)

    Dear madams and sirs,
    the issue is the following: I have some text that needs to respond to MouseClicked.
    This text NEEDS to be orange - that's why i use a Text control.
    Problem: it only catches a click on the strokes and not inbetween.
    Possible solution: Use a Hyperlink control. But I cannot work out how to change it's color to orange.
    So how on earth can I either make the whole Text clickable
    OR change the color of the Hyperlink (any other way apart from css?) ?
    p.s.
    is it possible here to confine the search to specific forums?

    After hours I finally found a way to work myself around these two still unsolved questions:
    instead of the Hyperlink or Text simply take a Label, insert text, give it a color
    and put a transparent Rect on top of it. The Rect does the mouse listening.
    so another question arises:
    Why does the Label not respond to any mouse event? In my case it did not even support the change of cursors?

  • Having trouble changing hyperlink color

    Hey everyone. I've been working on customizing one of the default themes and I can't seem to change the color of the hyperlinks to better suit my page. The desired color only shows up when I put the mouse over the hyperlink itself, rather than being displayed as that color without being indicated. The color it is looks particularly awful with my page, so I'd really appreciate some help. Thanks.
      Mac OS X (10.4.8)  

    Have you seen this resource page from Michael Wong? It might provide some hints to you. I don't know if you are trying to edit the xml or just the published css, though.
    http://www.rowan-cottage.co.uk/Site/CSS%20in%20iWeb.html
    Anyways, it looks like the hyperlinks have 3 distinct states: unvisited, rollover, and visited, and the one it sounds like you want to edit is the unvisited state.

  • ScrollPane - Changing various colors and appearance

    I am trying to change the color layout of my ScrollPane boxes.  My website (removed) has a clean, white background.  The default white and light grey color of the standard ScrollPane scheme blends in too much.  I would like to change the color of the vertical scrollbar so that it stands out more.  Also, maybe have the background of the text box a light blue hue with black lettering to give it some "pop" also.
    I am running Flash CS5 in AS 2.  I have read on another website to do the following in ActionScript:
    ScrollPane.setStyle("themeColor", "haloOrange")
    ScrollPane.setStyle("borderStyle", "none")
    ScrollPane.setStyle("scrollTrackColor", 0CC333)
    ScrollPane.setStyle("symbolColor", FF00FF)
    ScrollPane.setStyle("symbolDisabledColor", FFFF00)
    This did not work.
    Look at the bottom of the website for "Terms - Credits - Policies".  On this page there are three scrollPanes.  This is where I want to create these colorful ScrollPanes.  Please help.  If you want me to send you screenshots, I can do that, but looking at the live website might be all you need.  By the way, I am a novice in ActionScripting.  Thanks.  djm

    Thank you.  We are one step closer....
    Here is what I have done with its results.
    I removed the action scripting in the ScrollPane page noted in previous replies.  I left in your original step of "backgroundColor".  This is the only step that works.  I altered the "ThemeColor" from "haloBlue" to "haloOrange" to see if the buttons change, and they do.  So that is a good thing.  I then removed the scripting altogether because they are not the corect color selections for my website.
    Now, I followed your suggestions found on both links noted above.  There must be something I am missing. 
    I opened the HaloTheme.FLA file and FLASH opened it in a separate window.  From that window, I located "VScrollBarAssets" movie clip.  I dragged that movie clip into my document's library.  FLASH created a new folder with the following format:
          Flash UI Components 2 >  Themes > MMDefault > Scrollbar Assets
    In the last folder, VScrollBarAssets Movie Clip exists with "States" and "Elements" folders.
    I am able to change the colors in "VScrollBarAssets", but when I test the movie (either by Publishing (F12) or selecting "Control -Test Movie"), there is no change in the tested version.
    I do the same by changing the colors of  "ScrollThemeColor1" and "ScrollThemeColor2" in Elements folder.  Still no change when tested.
    I made the color choices a brown color to make it obvious.  The default light blue and grey colors remain.  What am I missing?  THANKS!!  djm

  • How can I change the color and size of the freehand tool in Adobe Reader on the IPAD?

    How can I change the size and color of the freehand tool in Adobe Reader for IPAD?

    One more step I didn't mention. After making your freehand drawing, you need to click Save (upper right) to let Reader know you're finished drawing. Then click on it, and the contextual menu will look like this:

  • Data model automatically changes the color and the report corrupts.

    we want to run six reports in a single report and users can run the report they select . So,We have 23 simple queries in datamodel and 20 pages of layout,
    it was working fine.but now if we make some changes the color in the datatmodel changes,when we try to save this the file corrupts.when we try to open the
    file it says some information missing in the report.we have reports builder10g.Is there any size limit for rdf file? because our rdf file size 944kb.
    Thank you.

    No.

  • Changing hyperlink colors for the navigation bar

    hello all i am trying to figure out how to change the color of the links that are the top of my page in the navigation bar. i know how to do it with the ones in my text- but i cannot figure out how to do so for the ones at the top of each page in the navigation bar.
    any help would be much appreciated!

    Welcome to the Apple Discussions. Here's a link to a post by Cyclosaurus, the resident java script expert, about changing the font, etc. in the navbar with java script and a HTML snippet.. Don't know if includes color also.
    http://discussions.apple.com/thread.jspa?messageID=8600361#8600361
    OT

  • Thunderbird changing existing color, and occasionally font, from original messages in replies

    Hello,
    Thunderbird keeps consistently changing text color (always) and font (sometimes, intermittently) when I reply to a message. I hope the attached images will make clear what I mean.
    I have many e-mail exchanges where individuals involved use both font and color to make it instantly possible to distinguish who said what, and often in what order, based upon the font being specific to the individual and the color specific to the response given.
    You will see in the attached screen shots that the original message contained two different fonts in dark blue colors. When I hit "Reply" the compose window switches all the text from the old messages to black. In this case it wouldn't matter much, but it can be very disorienting when you have an e-mail exchange going on that's got more participants all of whom use signature fonts and change either the font and/or color as the conversation progresses. Having everything "go black" removes essential context.
    I also find it odd that when you place your cursor in the middle of existing text and open up a new line to insert your own material that the new material always mimics the last font that was in the material you've just "split open" to add your own reply. In virtually every other e-mail editor I've used when you place yourself in existing text and split it apart by hitting a return the opened area typically would use the font and font color you currently have specified in the compose window.
    If there are settings I need to tweak to:
    1. Force Thunderbird to maintain all existing fonts and font colors when replying to an existing e-mail message,
    2. Get Thunderbird to use the font and font color I have chosen in the compose window any time I split existing quoted material to add new material,
    I'd love to know what those settings are.

    Matt,
    I decided to do some experimentation with creating multiple messages and replies strictly within Gmail's web interface and then to reply to same from Thunderbird. After that, I attempted to start the same sort of chain strictly using Thunderbird to create the messages. The difference is pretty stark.
    The first attachment is how the multiple fonts and colors that originated from Gmail show in Thunderbird's reading window. They are all correct here.
    The second shows how the multiple fonts and colors that originated from Gmail show up when I reply from within Thunderbird. Again, all of those fonts and colors are maintained as sent and the font and color I designated in my Thunderbird options are what get used when composing the reply.
    The last shows what happens when I sent a message created in Thunderbird with one font and color and then go to reply to it from within Thunderbird after having switched my default font and color choice for composition intentionally prior to replying. The font from the original message is retained in the reply, but the color is converted to what has been selected for composition. This suggests to me that Thunderbird is not retaining color information at each "level" within a reply. It has to have sent color information in the original message because it shows up in that color on receipt when reading (I didn't bother with a screen shot, but if you want one I can get one). When replying it is stripping or overwriting the color information from the original message and using the current compose color and applying it to everything in the window.
    As far as I'm concerned, that's a bug.
    Brian

  • How do i change marker color and fill in a chart

    Hi,
    In a chart in keynote - I am struggling to find a way to change the color of the marker of a data series. Also cannot seen to customize the fill and line of the marker.
    Can someone provide guidance.
    Y

    Keynote has a few ways to change colors, but markers are tricky as only the center color can be easily changed.
    Using the Chart > Inspector > Change Color option is hit or miss - sometimes you get what you want, but many times you don't.
    To change the color of a series line perhaps the easiest way is to click on the chart series (line, wedge, column, etc.) so that it is selected then click on the Color Picker Tool on the Tool Bar, select the color in the color array, (gamut, crayons, etc). you wish for the series and then drag that color from the Color Picker Well onto the series line.
    Note: Changing the color of the Data Symbol (triangle, circle, square, etc.) seems to defy all attempts to change the color of the actual Symbol, but you can change the color of the inner dot fairly easily using the methods described here.
    There is a  useful Video Tutorial that shows how this is done:
    http://www.apple.com/science/productivitylab/#researchpresentations
    Note: the tutorial was prepared for Leopard, but the methods still apply - look around 1:30 (1 minute 30 secs) through about 2:30 for details. Watch the whole video - it's interesting.
    Good Luck.

  • Working with Edge Animate, how do you change layer colors and and names of layers?

    For many years, I have worked with Adobe Photoshop, and the ability to change layer color or the name of layers is quite easy. I have been reading around about how to do this with Edge, but, can't find any information on how I might be able to do this. Can you help?
    Thank you!
    LainKennedy

    Hi Darrell,
    Thank you for your answer. When I double click on the layer name, it opens for a second, then closes. I have tried to close the app, shut down my workstation, throw out the preferences, and, nothing seems to work. Am I doing something wrong?
    Thank you, again, for your timly answer. Really appreciate your help.
    Lain

  • TS3999 ios7 iCloud Calendar changed calendar color and won't let me select a different color.

    I updated my iphone 4s to ios7 without issue, then I got my iphone 5s and restored from my 4s' backup. Everything worked smoothly and great, except that one of my calendars had their color changed (from orange to purple).  Now I already have a purple calendar, which is why this is problem.  I have attempted to change my calendar color several time, and I get no error and it look like it works great but a few seconds later it changes itself back to purple.  Not the most critical bug, but very annoying.  I have attempted to change the color both on my phone and on icould.com, but neither work.

    Quit iCal.
    Drag the folder ~/Library/Application Support/iCal to the desktop.
    Delete the iCal preference files (again).
    Delete folder ~/Library/Application Support/SyncServices.
    Restart iCal.
    Verify that you can add and modify calendars.
    If you can, open the Sources folder in iCal folder that you put on the desktop. There will be one folder in it for each of your former calendars. Open each in turn and drop the corestorage.ics file onto the iCal icon. This should import your former calendars.
    AK

Maybe you are looking for