Changing "Icon size" causes .ARW thumbnail image in folder to disappear and icon to appear

Is this a bug everyone is getting?
Have .ARW files in a folder and it shows thumbnail images of the .ARW files, but if I increase or decrease the slider to different sizes (to view better), a icon will appear instead of the . ARW preview image. Out of all the sizes on the slider only 2 or 3 sizes will show the .ARW thumbnail image.
Any ideas? known issue?
thanks

The method I use is to open the jpeg file Command+A (select all) then Command+c (copy) close the jpeg preview window. Select the small icon on the top left corner of the get info window for the perspective folder. Command+v (paste) puts the copied image in and it then becomes the icon. If you want to use the drag and drop method you will need to convert the image file to an icon which can be done with automator. The icon however is less clear when you do that.

Similar Messages

Lightroom 5 Help says that to change the size of filmstrip thumbnails: "Place pointer over top edge of filmstrip; when pointer changes to doublearrow, drag the filmstrip edge up or down." However I never get a double arrow. Instead I get a hand icon tha

Lightroom 5 Help says that to change the size of filmstrip thumbnails: "Place pointer over top edge of filmstrip; when pointer changes to doublearrow, drag the filmstrip edge up or down." However I never get a double arrow. Instead I get a hand icon that allows me to drag the thumbnails to right or left. How can I change the filmstrip thumbnail size?

It works for me. Are you sure you are hovering in the right spot? It's the dividing line between the filmstrip and the Toolbar.

How to change the size of the thumbnails in Firefox 33?

In Firefox 33, the thumbnails on the new tab are huge. i want to see 9 but i only see 3. How can I change the size of the thumbnails to restore the way they llok like in earlier Firefox versions?

It works for the case only when I open a new window, but doesn't remember it for any new tab I open later.

TS3276 Mail images disappear and Base64 code appear in-place.

After receiving and viewing a mail with inline images, I close the message and when opening it again, images disappear and Base64 code appear in-place.
How to revert that?
I don't use any plug-in, running Mail 6.6 (1510) and OSX 10.8.5

>Only if your network is unstable. For most groups, it's not only
acceptable but in fact is the only way to work especially if there's an
InCopy element to the workflow.
This will always come back to bite you eventually. Maybe not today and maybe not even this year, but eventually.
http://blogs.adobe.com/jnack/2008/06/filesaving_issu.html
Why not set up a good system to deal with file check-outs instead? We link directly to all of the graphics across the network, but the actual InDesign files that are going to be edited and saved are all edited locally after check-out.
Just my $.02 on the matter...
EDIT: Oops, I see you tried the INX export already! Were these files perhaps pasted directly into InDesign? If so, you can copy them out and save them as graphics and relink to the graphics, but otherwise they are just a part of the file.

CR2 file icons not always showing thumbnail image depending on view.

I have some CR2 files which behave oddly. Some show an icon which is a thumbnail of the image when in list view but a blank icon when in icon view? While others show a blank icon in both list and icon view?
Doing a get info and they all show a preview image and quick look displays the image, it is just the icons in icon view which are blank.
Is this something that can be fixed?
Phil

Yes it can, as I have found out!
I opened the folder which contained files which were displaying a plain icon when in Icon View. I then selected from the View Menu 'Show View Options', it was here that I discovered the check box for 'Show Icon Preview' which in this case was unchecked. When I checked this box the blank icons changed to a preview.
So problem solved.
Thanks to myself.

Can you change the size of the preview images on an Apple TV without changing video resolution?

I have a 32 inch LCD TV. My room is relatively large and I can't easily see the preview images or read the text on the TV across the room. Is it possible to change the size of preview images in the menu screens without increasing the resolution of the TV itself? I think this should be possible, but can't seem to find a way to do it.

No that's not something you can do on the Apple TV.
If you have any suggestions that you think might enhance the Apple TV you can send Apple your feedback here.

For the second time today images in Firefox have disappeared and, as I was Sincing two computers at the time, now they BOTH have the same problem.

Earlier today, the images on Firefox completely disappeared. Nothing I did fixed this issue; not restarting in Safe Mode, not disabling individual add-ons, nothing. No other browser was affected. After a little over an hour of this, the images suddenly came back with no changes from me. A little less than an hour ago, the same issue started happening, this time, though, I was using Sinc to transfer data to another computer and now both of them cannot display images in Firefox. Please fix this.

Make sure that you do not block (third-party) images, the permissions.default.image pref on the about:config page should be 1.
*http://kb.mozillazine.org/about:config
Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
Make sure that you allow pages to choose their own colors.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
Note that these settings affect background images.
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong
There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*http://kb.mozillazine.org/Websites_look_wrong

Can I change the size of a photo image to less than 6KB?

I am trying to reduce the image size on i photo to less than 6KB or to less than 80x80pixels,
on a photo that was imported from photo booth, is that possible?

You can certianly get the 80 x 80. Crop the image to square, then File -> Export and you can set the maximum dimension in the Size field in the Export dialogue.
Regards
TD

I can't change font size. It goes only from 1 to 9 and can't enter an especific number.

I use Mac and for the first time I face this problem... I used to be able to enter the font size lik 32, 48, 96... any number in flash CC I can't. Is there any way I can change this? I looked in preferences and found nothing!

Hi Agda,
This is a truncation issue which we are investigating, however the functionality should work as expected as the size filed still has the information that you have entered say if you enter 12 you might see only 1 in properties panel whereas it has the value of 12 and your text on stage should get applied with 12 pt size.
Hope this helps.
Thanks!
Mohan

ON NEW TAB MY THUMBNAILS HAVE DISAPPEARED AND ONLY AOL APPEARS, HOW TO CORRECT

on all new tabs my ao news appears and not my thumbnails , need to get my thumbnails back , and my firefox is the latest version

You can check the browser.newtab.url pref on the about:config page and set that pref to your preferred new tab page.
* the default home page is about:home
* the default new tab page with the tiles is about:newtab
* for a blank page you can use about:blank
See also this article about the New Tab page (about:newtab):
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config

Changing the size of images displayed when a thumbnail is clicked

In an Aperture gallery, how do I change the size an image is displayed when a thumbnail is clicked. There are sliders for changing the size of the thumbnail; I can't find an adjustment anywhere for the size an image is displayed when the curved arrow in the upper left hand corner is clicked.
Help!
--Kenoli

Hi Kenoli,
In an Aperture gallery, how do I change the size an image is displayed when a thumbnail is clicked.
Do you mean "double-clicked"? In "Browser" mode, when I click on a photo, nothing changes. However, when I double-click on a photo, it switches to "Viewer" mode.
However, I'm missing the curved arrow that you mention. I can't find any photos with a curved arrow over them in any mode. In fact, the only overlays are the badges in the lower right.
Can you be a little more specific about exactly what mode you are in?
nathan

Adobe Reader PDF Desktop Icons No Longer Thumbnail Images

Hi...
I am running Windows 7 Home Premium x 64 - and thanks to a fix for this I found somewhere a while ago, it's been working fine for the longest time. In the past week, I see that my Adobe Reader desktop icons are no longer thumbnail images - they are back to the old standard Reader icons. I've tried uninstalling / reinstalling Adobe Reader - unapplying / reapplying this x64 thumbnails fix - and combinations of the two. Nothing has worked thus far.
Does anyone have a suggestion / fix / etc. on how I can get my PDF icons back to the thumbnail images - NOT the standard gray .PDF reader icons?
Thanks so much!
Andy

Hi Jnicholas330,
I need your XFA form file to investigate the issue. I sent a separate mail to you.
Thank you.

How to change icons size? - lollipop update

Sony recently gave an update on the Xperia Z Ultra which brought a new launcher as well, which unfortunately introduced extremely huge icons.Is there any way to reduce the icon size or downgrade the verion of the launcher as I would like to stick to the Sony Xperia Home Launcher. Kindly advise.

Hi, I've got problem after my lollipop update (I've updated my mobile yesterday), the icons are very big the same as before lollipop update. Is there any possibility to change the size? I've been searchin in the Internet and in my mobile settings, but I cannot find it. Any idea?Or should I stay with my Nova Launcher forever? My mobile: Xperia Z 2, D6503,Android ver: 5.0.2compilation nr: 23.1.A.0.740 Thanks in advance!

Changing Thumbnail Image Location

Is it possible to change the location of the thumbnail images on the enlarged photo page (second page in on the Photo Page)? By default they reside horizontally above the enlarged picture. I would like to move the thumbnails vertically to the left or right of the picture.

Welcome to the Apple Discussions. No. That being said Cyclosaurus has posted numerous javascripts to modify iWeb in a number of ways. He's posted a script to remove the thumbnail strip from the photo page: http://discussions.apple.com/thread.jspa?messageID=8318600&#8318600 .
I've not found any scripts to move the strip to the side.
However, it can be done with java based slide shows like those shown in these demo pages which has a variety of configurations available:
SimpleViewer
Flash Album Exporter Postcard and AutoViewer Slideshow Themes
Jalbum - there are over 100 skins/themes for this application, many of which will have what you want.
OT

Icon sizes for Windows 7

My application is running in Windows 7 Ultimate 64-bit and I'm using LabWindows/CVI 10.0.1. I created an icon file in the included icon editor. I kept the default 32x32 and 16x16 sizes and added 48x48 and 256x256 versions, all with 32-bit color. I set the Target Settings to use this new icon.
When I look at the folder containing my application's executable in Windows Explorer and go through the various methods of viewing the folder, not all of the sizes show my icon. The 16x16 image is used for the List and Details views, and as I increase the icon size the 32x32 and 48x48 versions seem to kick in. Then when the icon size gets to medium, I see the default LabWindows/CVI icon (the one that looks like a window with the "cvi" symbol in it). As I make the icons even larger, eventually the 256x256 version of my custom icon takes over.
MSDN seems to say that those three sizes are all the sizes required for Windows 7. How can I override the default "cvi" application icon for all sizes? Is it necessary to use a different icon editor to create some different size of icon image?
Thanks,
Brian
Solved!
Go to Solution.

What is probably happening is that your icon cache is corrupt. Searching online, I found many different ways to resolve this issue and none of them "official" from Microsoft, so I am hesitant to recommend any one way to rebuild your icon cache. However, all I did to resolve this was delete C:\Users\<user>\AppData\Local\IconCache.db and restart my system. The IconCache.db was rebuilt and the correct icon shows for larger sizes rather than the default. It seems that the first icon you view at the medium/large size gets stuck in the IconCache. For instance, I changed my icon before viewing it at a larger size (never saw the CVI icon) and the icon I used was the one stuck for the medium/large size.I don't think it will be an issue on a target system because you will not be changing the icon one you distribute the application.
It is not clear to me if this is an issue with a Windows bug (I did see similar reports on various forums, but nothing official), with our icon editor, or with the way CVI attaches icons to executables. I have filed bug report 354481 to investigate this issue.
National Instruments
Product Support Engineer

Changing "Icon size" causes .ARW thumbnail image in folder to disappear and icon to appear

Similar Messages

Maybe you are looking for