Changing iDVDs default drive

My 104 superdrive went bad and will not burn discs any more, though it will still read discs fine. I now have an external LaCie drive, with works wonderful.
My issue is that I now need to create a OneStep disc, and iDVD wishes to use only the internal (non-working) drive.
Does anyone know how to change the default drive that iDVD uses, so that when I do a OneStep disc, it will allow me to use the external drive?
Thanks.

Hi Michael:
This is one way-
1. Edit your movie in iMovie and put in your iDVD chapter markers.
2. Save the iMovie project and exit.
3. Open iDVD and create a new project. You can now choose where the project will be stored.
4. Go to File => Import=> Video
5. Navigate to your iMovie project folder and select the .mov file that has the same name as your iMovie project.
6. It will ask you whether to import chapter markers, which, if you made any, you do.

Similar Messages

How can I change the default driver to OracleXADataSource in JDeveloper

Hello,
How can I change the default oracle driver: oracle.jdbc.OracleDriver to oracle.jdbc.xa.client.OracleXADataSource in JDeveloper Studio Edition Version 11.1.1.0.2, Build JDEVADF_MAIN.BOXER_GENERIC_090328.0229.5205.
If I modify the file connections.xml from jdeveloper\system\system11.1.1.0.31.52.05\o.jdevimpl.rescat2\connections in the sense that I change the driver class, then in JDeveloper when I test my connection I have this problem: Test failed: oracle.jdbc.xa.client.OracleXADataSource cannot be cast to java.sql.Driver
Why do I need this XA version of the oracle driver? Well I tried, from a book to reproduce the model of an application: entities, stateless and stateful session beans, mdb, web services and a client to test one part of the model.
And because of the JMS server I need an XA driver.
I deployed to the integrated wls 10.3 and when I test my client, if I use the default driver for the connection the an error message appears tell me either to emulate two-phase commit or to use XA driver.
My application works very well, if I configured in the console of the integrated wls 10.3 a datasource with the same name as my ide/application connection that has for the Driver Class Name: oracle.jdbc.xa.client.OracleXADataSource in the Connection Pool tab.
Thank you.

Open DIsk Utility and in the toolbar select Disk Image. The file selector will open and you'll have to do three things: 1) just as with any file, name it and point the file selector to where you want it to be saved, 2) near the bottom you'll see name - type iWork 2013 and 3) below that select the image size. Click on size, choose custom and type 1500 MB then click on the Create button.
Some time will pass and then you'll see an external disk pop up on your desktop and/or the Finder window sidebar. Drag the three programs into it and eject it like any other external disk. Now delete the programs from your applications window.
Where ever it was you pointed the file selector to you'll see the file you created. Double click on it and the disk image will mount again.

Change iDVD default folder?

How can I change the default iDVD project folder to something else than ~/Documents?
I could not find any options that would let be set the default for this.

Chapters are set in iMovie, and the buttons for them created automatically in iDVD.
If you haven't yet had an opportunity to fully familiarise yourself with these applications, perhaps these tutorials may be useful:
Ken Stone's iDVD 7 manual:
http://www.kenstone.net/fcphomepage/idvd_07stone.html
iMovie 6 (and iLife 6) tutorials:
http://www.apple.com/support/ilife/tutorials/imovie/
iMovie 9 tutorials:
http://www.apple.com/ilife/tutorials/#imovie

I went to do an Itunes update, got error mssg and I needed to uninstall and reinstall. It's is on an external hard drive so I changed the default drive that and I'm getting this error mssg:"Apple Mobile Device failed to start. Verify sufficient privileges

I went to do an iTunes upgrade and got an error message that it could not be found? It suggested I uninstall and reinstall my iTunes. After a failed attempt, I realized the location was set to the default hard drive of C:, so I tried again by changing the location to my external hard drive. Now I get an error message that says:
Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.
Help! What's the deal?
Stacey

Hello staceonbass,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario

How do I change the default drive downloads are saved to?

because my c SSD is full

'''You can check these in about:config entries documentation'''
*browser.download.dir user set C:\download_win7
*browser.download.downloadDir user set C:\download_win7
*browser.download.lastDir user set C:\download_win7
Move your cache to out your profile, so you don't backup as part of profile
*browser.cache.disk.parent_directory user set string c:\\temporary\\Firefox-Four_cache
You might also clear cache with at end of each session to speed things up.
:http://img232.imageshack.us/img232/4928/clearcachew.png
'''More information on configuration variables''' available in
[http://kb.mozillazine.org/About:config_entries about:config entries] and for users not familiar with the process there is [http://kb.mozillazine.org/About:config about:config] (How to change).

How do you change the default save as directory when saving a PDF file to your hard drive?

This is the on-line help instructions on this site:
Downloading a PDF file to your hard drive
You can download a PDF file to the hard drive from a web page's link. Downloading PDF files doesn't require the ActiveX plug-in file to be installed. (If you want to open and view the PDF file after downloading it, you must have Acrobat, Adobe Reader, or Acrobat Reader installed.)
To download a PDF file from a link:
1. Right-click the link to a PDF file, and then choose Save Target As from the pop-up menu.
2. In the Save As dialog box, select a location on your hard drive, and then click Save.
My issue: I want to save several pdf files (from the Adobe Reader in my browser) one at a time and each time it defaults the save as directory to the desktop and I have to go looking for the directory I last saved a pdf file in. I got lots of directories and I wish I could change the default setting for the save as directory. Just a minor thing but irritating as other programs usually will allow you to switch the default save as directory to one of your choosing.

There is not a way to set the default location from all the forums i searched in the last couple days.
Russ

File === Open (Drive Designation)---Changing Default Drive and Path

Within Oracle SQL Developer, Version 3.0.03, when I perform a ...
File ===> Open
It is defaulting to A: Drive. How can I change the default path and directory location of where my SQL Scripts reside???
Thanks in advance for your review and am hopeful for a reply.
Thanks!
PSULionRP

I'm afraid you can't, but do I remember some threads here to disable using the A: drive - try the forum's search.
Regards,
K.

Changing default drive

Recently installed, mounted and named an external drive. Can iPhoto, iTunes (and other applications) have their libraries and additions thereto be assigned to the external hard drive as the default drive?

Welcome to Apple Discussions!
They can, but there is a significant problem with this. Data backup becomes difficult as you now have your data on two different drives. It no longer becomes simply a matter of cloning, especially if you have issues daisy chaining the drives on your Mac Mini. If you can get two drives to reliably daisy chain via the Firewire port, great. Otherwise it may be time to consider someone helping you install a larger internal drive for your Mac Mini.
For iPhoto you can put the entire Users -> yourname Pictures folder on your external hard drive, and empty it on your internal drive. When iPhoto asks you if you want to locate a library have it navigate to your external drive.
For iTunes you can set in its preferences which folder it reads the library from and then tell it to manage all the files there.

Changing the Default name of DVD Disk in OneStep

Is it possible to change the default name of the disk that is burned on iDVD 6 "OneStep DVD" ???
the default disk name becomes "IDVDONESTEPDVD"...
I make lots of DVD with OneStep and would like the name created to be different.
Is this possible and if so...How??
Thanks for your advice...
STDigital

Not sure if this is possible or not but did you already check the iDVD6 Help Menu and try the following?
Choose Project > Project Info. Type the new name in the Disc Name box.
If this approach isn't possible, then it's likely not a very good idea to change its default title. Good luck.
(3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8) My ichatav AIM account is: SDMacuser1 (Please use Text chat prior to video)

Power view in SharePoint - Changing the default save location?

Is it possible to change the default location when saving Power view back into SharePoint?
Our users are creating their own power view reports by clicking a power view shared data source in SharePoint document library.
When saving their reports, the default location is always the same location where the data source is. This is described here also:
https://support.office.microsoft.com/en-us/article/Power-View-in-SharePoint-Server-Create-save-and-print-reports-f616575e-02bf-46cd-b94a-b744245ef9d1?CorrelationId=a852221e-b063-4020-a20a-53d8e8fb8b8b&ui=en-US&rs=en-US&ad=US
Quote from the link: "The first time you save the
report, the default location will be the folder where the model is located."
Ok, understood. But is it possible to change this???

Hi again
Ouch! Not the network!
One of the hard learned issues that folks are unaware of until they encounter problems is that Captivate does not do well when a project is stored on a network. It's fine to keep projects there in order to back them up or as a transfer pivot location to allow others to edit, but you never want to open Captivate, click File > Open and browse to a network location to open a project for editing.
Best practice at this point is to keep projects on your local C drive when you make edits.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Office 2013 - Is there a way to when installing that you can change the default save location without having to configure it within the client?

So, What I am trying to do is deploy Office 2013 throughout our company, and I do not want the users to save their business or personal files created within Office 2013 on the C: drive or Sky Drive. We have what is called the U: drive and I'd like to know
if there's a quick registry tweak that I can use to not only change the default location upon setting up a computer, but to deploy through Group Policy?
One other question perhaps; Is there a way to change not only the file location to default to only the one place, but also is there a way to also set a specific size limit to folders and prevent certain files from being saved (videos and personal pictures).
I have our network pretty tight as to what or who can go where, and what not, I am just really for an answer or some help to the default location...anything you have GREATLY APPRECIATED!

You can use the OCT and/or domain Group Policy, to customise the Office experience and settings for your users:
https://technet.microsoft.com/en-us/library/ee460874.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How to change the Default Password on AP1131AG

Hi all :
I tried to change the default password Cisco to other by command line but the password cannot work out.
The command line I used are as below :
AP#conf t
Enter configuration commands, one per line. End with CNTL/Z.
AP(config)#enable pass
AP(config)#enable password 4dMINO123 ?
LINE    <cr>
AP(config)#enable password 4dMINO123
AP(config)#exit
AP#wr
*Mar 1 04:39:23.902: %SYS-5-CONFIG_I: Configured from console by console
Building configuration...
[OK]
AP#exit
This still cannot cahnge. Below I do again below commands :
AP(config)#enable secret
% Incomplete command.
AP(config)#enable secret ?
0      Specifies an UNENCRYPTED password will follow
5      Specifies an ENCRYPTED secret will follow
LINE   The UNENCRYPTED (cleartext) 'enable' secret
level Set exec level password
AP(config)#enable secret 5
% Incomplete command.
AP(config)#enable secret 5 ?
LINE The ENCRYPTED 'enable' secret string
AP(config)#enable secret 5 LINE
ERROR: The secret you entered is not a valid encrypted secret.
To enter an UNENCRYPTED secret, do not specify type 5 encryption.
When you properly enter an UNENCRYPTED secret, it will be encrypted.
AP(config)#enable secret LINE
AP(config)#exit
AP#
*Mar 1 04:40:53.021: %SYS-5-CONFIG_I: Configured from console by console
AP#
AP#exit
After that when I access with >en again as below with correct password of 4dMINO123 and it always fails as below :
Can anybody help to provide correct way of changing the default password of Cisco to another password? Many thanks!
AP con0 is now available
Press RETURN to get started.
AP>en
Password:
Password:
Password:
% Bad secrets
AP>en 0
AP>en 5
% No password set
AP>en 15
Password:
Password:
% Password: timeout expired!
Password:
% Bad secrets
AP>
AP>
AP>en
Password:
Password:
Password:
% Bad secrets
thanks and best regards,
tangsuan

Hi, I have even the worst problem,
that seems probably to to be never asked on Internet. After quick learning how to reset this creapy device, I can't get by no means the enable password in default config for this box, having read everywhere from Cisco guide through community pages to Google pages.. NOWHERE.
Question is : what else except Cisco, cisco, root, password... can solve this stupid issue?!? I expect some guru from responsible AP BU to answer this with definite answer, or someone from Cisco having mercy with me to contact such guy(s).
Here is my desperate situation :
Nothing from this page helped :
http://www.cisco.com/en/US/partner/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml#reset_ap_newer
Situation after hard reset:
Xmodem file system is available.
flashfs[0]: 26 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6879232
flashfs[0]: Bytes available: 9119744
flashfs[0]: flashfs fsck took 43 seconds.
Base ethernet MAC Address: 00:22:55:9f:fc:a0
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
button pressed for 1 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
Loading "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"...#########################################################################################################################################################################
File "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
Image text-base: 0x00003000, data-base: 0x0035E440
Initializing flashfs...
flashfs[1]: 26 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 6879232
flashfs[1]: Bytes available: 9119744
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC12354426
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1238Q0HK
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
Press RETURN to get started!
*Mar 1 00:00:08.354: %CDP_PD-4-POWER_OK: Full power - AC_ADAPDOWN: Line protocol on Interface FastEthernet0, changed state to up
Press>en
Password:
Password:
Password:
*Mar 1 00:00:27.393: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
% Bad secrets
Press>en
Password:
Password:
Password:
% Bad secrets
Press>
*Mar 1 00:00:36.530: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.1.2, mask 255.255.255.0, hostname Press
Press>en
Password:
Password:
Press>sho ver
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
Press uptime is 17 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC12354426
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1238Q0HK
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
Configuration register is 0xF
Press>

Want to change the default save location- users have networked home dirs

I am doing some work for a school which is still using iMovie HD because it allows them to save their movie projects wherever they want. The issue is that iMovie 08 and 09 do not allow you to change the location in which they save their movies. Currently all users/students have network home folders, so their home directory, documents, etc all pull across the network. All students are limited to 1GB of space, and the system is an older G4 Server- 2GHz with 1GB of RAM and 2x 500GB hard drives. Since the students can make some large projects transferring that data back and forth can kill the server. Currently they are staying with iMovie HD so they can save it to the local hard drive, and when the student comes back in for class they sit at the same machine- thus giving them access to their stored movie files.
This summer they plan to upgrade both Xserves, but again internal storage in the Xserve is a joke and in my opinion not planned out properly. Which might require them to use one of the Apple Promise RAID units- major financial burden on a school.
I wanted to see if there was a way to change the default save location for iMovie 08 or 09 to the local storage rather then the "Home" folder for each user.
Thanks so much!

hackths wrote:
.. The issue is that iMovie 08 and 09 do not allow you to change the location in which they save their movies. ..
wrong info.
iM08/09 has a different file concept than iMHD6.
Both versions allow to store Events (=huge files) 'anywhere' to usb or firewire connected, hfs(+) formatted harddrives. the Project files (=small files) can be de-located from 'internal' drive with vers09, for 08 you have to use a socalled symLink to de-locate Project files.

Need help changing the default Save Path

Hello,
We are implementing SAP, and will be using Citrix as the source for the GUI. One of our requirnments are, that we need to change the default "Save Path" that users save documents too. By default, this is to the C drive, but, we need it set to a different drive (i.e. V: on the citrix server).
We found this note on SDN (see below) - however, it does not explain how to change or add this registry value? Is this done in the GUI options, or in regedit? If in reg-edit, where abouts in the tree does it go?
Thanks guys, and any help would be greatly appriciated.
Richard
(As of SAP GUI 7.20, patch level 4) the REG_EXPAND_SZ registry value InitSaveDir can be used to configure the default path and folder for users to save the reported information in case of an access denial due to security rules. If users change the default path and save the information to an individual location, this new path will be kept as long as the user does not terminate the program. When starting SAP GUI again, users will get the configured default path again to store the reported information, the individual path changes will be lost. If the registry value does not exist, the default directory is the document directory of the SAP GUI.
By default none of the above registry values exists. In order to change the behavior of the security module, the registry values need to be created and set to the desired value. A not existing registry value means use the default.
In this doc:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/002444be-7018-2d10-e18e-a8c537198ef6?quicklink=index&overridelayout=true

Hi,
"Security rules that are created for a large number of users can be centrally stored on a server by an administrator. The administrator can use the registry values below under the registry key
[HKEY_LOCAL_MACHINE\Software\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module.
Note: For 64 bit operating systems please use the following registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module."
You can use regedit for installing this values.
Best Regards,
Aleh

To change the JDBC driver for a single OC4J instance

Hello,
I implemeted an app with oracle adf (Jdeveloper 10.1.2 ) and it use Oracle Domain objects.
I have an oas 10g (9.04.1) in windows
and I want to change the default jdbc driver for a single oc4j instance
in metalink i found the following information:
1.- From OTN, download and copy the 10.1.0.x JDBC driver to a directory on the server. E.g OH/newjdbc
2.- Opening EM-Website, navigate to the OC4J instance that should be altered.
3.- Find the "Java-Options" and, add the -Xbootclasspath option to it, pointing to the new JDBC driver.
E.g. -Xbootclasspath/p:$OH/newjdbc/ojdbc14.jar
4.- Restart the OC4J instance
my 'Java-optios' default is
-server -Xrs -Djava.security.policy=C:\oracle\904\j2ee\test_adf\config\java2.policy -Djava.awt.headless=true
my new 'Java optios' now is
-server -Xrs -Djava.security.policy=C:\oracle\904\j2ee\test_adf\config\java2.policy -Djava.awt.headless=true -Xbootclasspath/p = D:\jdev1012\jdbc\lib\classes12.jar
is this correct?
now I cannot deploy my app
Rigoberto

Seems you missed something in step 3. From those steps the driver should be installed under C:\oracle\904\newjdbc and used in classpath, not d:\jdev1012.

Changing iDVDs default drive

Similar Messages

Maybe you are looking for