Changing IP addresses (and OpenVPN)

I tho't there was a thread on this subject, but it seems to have disappeared. Anyway....
Our network uses 192.168.1.0/24. We are now trying to set up OpenVPN but have "discovered" (what someone must have known) that it will not work from the outside from any location that is also using 192.168.1.0/24. If I had known that prior to setting up the new servers, it would have been somewhat easy to make a transition to another subnet for the internal network. (Why doesn't the documentation explain this a little better?) Now to change internal subnets will also require changing IP address on 2 SBE servers, 5 printers, a Win server, etc. It seems that common opinion about changing IP addresses on Linux is "don't try it."
If anyone has any suggestions, great. If not, then perhaps someone can pass this on to Novell so that others might be aware of this issue.
End of rant #114.

Originally Posted by danareedy
I tho't there was a thread on this subject, but it seems to have disappeared. Anyway....
Our network uses 192.168.1.0/24. We are now trying to set up OpenVPN but have "discovered" (what someone must have known) that it will not work from the outside from any location that is also using 192.168.1.0/24. If I had known that prior to setting up the new servers, it would have been somewhat easy to make a transition to another subnet for the internal network. (Why doesn't the documentation explain this a little better?) Now to change internal subnets will also require changing IP address on 2 SBE servers, 5 printers, a Win server, etc. It seems that common opinion about changing IP addresses on Linux is "don't try it."
If anyone has any suggestions, great. If not, then perhaps someone can pass this on to Novell so that others might be aware of this issue.
End of rant #114.
Here's the thread you were looking for:
http://forums.novell.com/novell-prod...server-ip.html
At this time, the OES2/SP2 script does not know about NOWS SBE. All I can say is Novell NTS is aware of the issue and so far there is no resolution.
You can open a Service Request and I suggest you do so. When several SR's are opened against the same issue it gives it more visibility and will attract more attention relative to other issues.

Similar Messages

  • HI, i bought my i touch 4th gen from the philippines, and i transferred here in the US. i would like to purchase an application here in the US but i wont allow me to. and i have been trying to change my address and country but it wont let me too.

    HI, i bought my i touch 4th gen from the philippines, and i transferred here in the US. i would like to purchase an application here in the US but i wont allow me to. and i have been trying to change my address and country but it wont let me too.

    What happens when you change your address in your iTunes account? You also have to have a payment method associated with the USA, For example gift cards are restricted to the country of their purchase.

  • How to change IP address and hostname in solaris 9

    Hi experts,
    I want to change IP address and hostname of the server , Plese give steps, or any precise document .
    Thanks
    Mohan
    Message was edited by:
    mohan_sr

    did you already change your ip and host?
    if not, do the following instructions:
    * verify your hostname
    - uname -a
    - cat /etc/nodename
    both should show your hostname
    * alter your hostname
    - uname -S newname
    * verify the hostname
    - uname -a
    - cat /etc/nodename
    both should show your newname
    * edit /etc/hostname.ce0 (type ce0 depends on your net device)
    - echo 'newname' > /etc/hostname.ce0
    * verify /etc/hostname.ce0
    - cat /etc/hostname.ce0
    should show your newname
    * edit the following files
    - /etc/net/ticlts/hosts
    - /etc/net/ticots/hosts
    - /etc/net/ticotsord/hosts
    replace old with new hostname
    * edit /etc/inet/hosts
    replace ip and hostname
    * you have to look for
    - /etc/inet/networks
    - /etc/inet/netmask
    fit yout data
    After doing all changes you have to reboot your system.
    Use ipconfig to verify network data

  • HT202274 Apple ID has my old email address. It will not allow me to change the address and will not accept my password or ID questions.   I recently upgraded to OSX Yosemite 10.10.1.  I also have an Apple ID that works with iTunes and would like to keep i

    Apple ID has my old email address. It will not allow me to change the address and will not accept my password or ID questions.   I recently upgraded to OSX Yosemite 10.10.1.  I also have an Apple ID that works with iTunes and would like to keep it as my primary.

    To change the iCloud ID on your devices you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted (if using iOS 7), then sign back in with your current ID.
    If you don't know the password for your old ID, or if it isn't accepted, you will have to temporarily recreate it in order to delete the existing account.  To do this, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • I tried to change my address and it says please contact you support and i cant download

    I tried to change my address and it says please contact you support and i cant download or purchurse any music

    Then contact iTunes Support...this is a user to user technical support forum.

  • I don't know why I can't buy an app it always says that I have to change my address and the thing I I can't change my address due to that I have money in my accunt that they won't let me spandet

    I don't know why I can't buy an app it always says that I have to change my address and the thing I I can't change my address due to that I have money in my accunt that they won't let me spandet

    Your payment method must be associated withe same country where you reside in order to update your apps.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    The Complete Guide to Using the iTunes Store
    Same policy for the Mac App Store.
    Open the App Store then scroll to the bottom of the window then select the round flag icon on the right to change the country.

  • Our home address changed and our AMEX card identity has been stolen.  So when i edit to change my address and AMEX number it won't let me and get this message: "YOUR SESSION HAS TIMED OUT.  TRY AGAIN.  How do I access the store to change my account????

    We moved and our address has changed.  Also our AMEX card identity has been stolen twice and AMEX has changed our number and security code twice already.  Now i am trying to edit my account at Itunes.  Every time I try to edit our account at Itunes,  I get this message: "YOUR SESSION HAS TIMED OUT. TRY AGAIN"  Anything i am doing wrong?  How do I get to the accounting department without getting this message?
    Thanks

    I am having this problem too. I recently changed ISP b/c I wanted the iPhone, so I had to update my iTunes username to my Gmail account.
    In fact, I logged in HERE using it as my new Apple Id... so it works!
    But for some **** reason that is driving me nuts my iPhone will not connect to the iTunes store using my new Apple Id. It keeps saying my email has changed or is invalid and asks me to sign in to change it. So I do that, and it lets me in USING MY NEW Apple ID!!!! Then I go back out to the buy the App and the madness starts all over.
    Come on Apple, do you want me to buy your apps, or what?

  • HT201320 icloud - changing email address and password on iphone 4s

    i have changed my apple email address and password but cannot change it on icloud on my phone .I have tried deleting the icloud account but cant because the password does not match the old email address . i have tried old passwords also.

    Try putting the device in Airplane mode, may not work.
    A restore of the device may be necessary.  If Find My iPhone is enabled, it would be necessary to wipe the device via www.icloud.com if unable to disable the feature on the device.
    Ideally, the user would delete the iCloud account on the device prior to changing the email account linked to it.  Simply changing the password should not have resulted in this issue.  It is most likely the combo of changing the email and password.

  • Changing email address, and reconfiguring iCloud

    Hey you guys! I recently changed the email address that I was using for my iCloud. Now my iPhone still has the iCloud information with my old email address, and to change that, it appears that I have to delete the iCloud account and re-add it. The only problem is: when I try to delete the account, it asks me for my iCloud password, but it's still linked to the old email address, so even though my password is correct, the email address no longer is, and thus it tells me that the password is incorrect, and I can't delete the account, and reconfigure iCloud on my phone. Suggestions s'il vous plait?

    Welcome to the Apple community.
    If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID and that ID is a previous version of your current ID, not an entirely different one.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
    You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.

  • Changing IP Address and ports in Directory Server 5.1 SP 4 and 5.2 SP4

    I have installed multiple instance of Sun Directory Server 5.1 and 5.2 on ports 389 and 390,now I want to change the IP Address and ports, I am able to change the directory server port from 389 by editing the dse.ldif file, now I want to change the port 390 and the IP address same as directory server, can someone expert from the forum guide me.
    Thanks in Advance.
    Mukesh Kumar

    1) I don't know what you've typed in when installing... but I've never seen that message. Are you using any language specific characters ?
    Do you get the error after this screen ?
    <b>
    The suffix is the root of your directory tree. You may have more than
    one suffix.
    Suffix [dc=sun,dc=com]:
    </b>
    If yes, then this means that the value you typed in is not a valid DN... and you must enter a valid one.
    2)The Directory Server is installed under /usr/iplanet but the database is under /var/iplanet/ds5 and configuration is under /etc/iplanet/ds5 ...
    You can use symbolic links if you want to move things around.
    3) You mean you downloaded the tar.gx file of iDS 5.1 and install it on Solaris 9... No problem, I do this every day. As long as you have right to create directories and files, you should be able to install as anyone. If not, you should install as root and then let the server run as a special user.
    4) Solaris 9 comes with iDS5.1 packages already installed. But the server is not configured at all.
    Running directoryserver setup allows you to configure it and create the database, accounts...
    Running directoryserver uninstall remove the instance of the installed database... It doesn't remove the packages. You can start again a setup...
    By the way, I think that iDS 5.1 on Solaris 9 comes with the full documentation... May be you should start by reading it.
    Regards,
    Ludovic.

  • Ipad is showing connected to wifi but it is saying its not connected to internet.  I have reset all settings, tried to change IP address and subnet mask and nothing is working.

    My ipad mini 3 is not showing that it is connected to the wifi, but it is saying it is not connected to the internet.  I have reset network settings and then reset all settings and it has not worked.  I have tried to change it to static and change the IP address and the subnet mask and that is not working either.  I have also tried to use the wifi in different places and that doesn't work either.  Please help!!!!  iPad is useless without the internet.

    1. Set router back to Auto DHCP.
    2. Turn off router for 30 seconds and on again.
    3. Re-boot iPad.

  • Unable to change registered address and credit car...

    My company recently moved and I as a Skype Business account admin trying to update the registration address and input new credit card with the new billing address. When I try to change this from the Company Details page I keep getting the following message.
    Important: If you want to change your company's registered address you'll need to contact customer support to make the change.
    I have spent more than 1 hour so far on Skype Chat support and sent a couple of emails. No help whatsoever. Can someone assist me with this. 
    Thanks

    TechAffinity wrote:
    My company recently moved and I as a Skype Business account admin trying to update the registration address and input new credit card with the new billing address. When I try to change this from the Company Details page I keep getting the following message.
    Important: If you want to change your company's registered address you'll need to contact customer support to make the change.
    I have spent more than 1 hour so far on Skype Chat support and sent a couple of emails. No help whatsoever. Can someone assist me with this. 
    Thanks
    unfortunately, they are the only ones who can help you regarding this matter.  may we know what did the customer say about your concern?  
    IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
    ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

  • Had to change email address and now can't update apps?

    I had to change my email address and now I can't update any apps?

    Hey ellen1411!
    You may wan tot make sure you are signed in to your Apple ID using the new email address in this section of your iOS device:
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Linking ipad, icloud, iphone and computer with changed email address and password?

    I changed my email address and password on Apple and am now having trouble getting my ipad, iphone, icloud and computer to accept changes. What should I do? Thanks.

    Hello gmille1,
    It sounds like you no longer have access to the email address that is also your Apple ID and you cannot remember the password for it. According to the following article you may be able to reset the password either by answering your security questions or sending a password reset email to your rescue email address if you had one setup.
    If you forgot your Apple ID password
    Answer your security questions
    Select “Answer security questions,” then select Next.
    Select your birth date, then select Next.
    Answer your security questions.
    Set a new password and select Reset Password.
    Use email authentication
    Select “Email authentication,” then select Next. Apple will send the email to your primary or rescue email address.
    Open the email and select the link to change your password.
    When the My Apple ID page opens, set a new password and select Reset Password.
    Use these steps if you didn't get the email or can't find it.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I changed email addresses and now I can't get messages on my iPad anymore. I can't figure out why.

    I changed my email address and now I am not receiving text messages on my iPad. Email address has been updated on iPad and iPhone

    Hello Kfswift,
    Thank you for the details of the issue you are experiencing with iMessage on your iPad.  I recommend the following steps for the issue you described:
    To resolve issues with sending and receiving iMessages, follow these steps first
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more abouttroubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
    Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
    iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you are still unable to send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Verify that the contact you are attempting to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up orforward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • Creative Cloud wont open or install

    I'm running a 64 bit windows 8 Alienware 17 and I'm had the program for about 6 months now. I admit I havent used the desktop program much, instead just pinning photoshop etc to my task bar. But my school required me to download another app from the

  • XI 7.0 passing attributes between java mapping and message mapping

    Hi all, Here's a newbie question. There is a scenario where an interface mapping has several stages of java mapping and message mapping I would like to know how to set attributes in the java mapping so that it can be accessed in a message map (or vic

  • RMA FORM USING SMARTFORMS

    I have been requested to make a Return Material Authorization RMA form using smartforms. My questions are: Is there any standard template/format in SAP I can use. And if there is, is there any standard ABAP program which i can use with the form (if o

  • Sony VAIO Flip 15 no longer booting

    Hi all, Here's my problem: First it started as the touchpad not functioning after powering on from sleep mode. So I uninstalled and reinstalled the touchpad drivers and it works again after a reboot. But the next time I power it on from sleep mode it

  • Execute in background, selecting target server

    Hi Gurus, System with DB-server and one applicationserver. for TC ZDOP, we increased Extendmemory on applicationserver only. With F9 - execute in background, there is no choice  to select the targetserver - like in SM36 for jobscheduling. Is thare a