Changing key in Logic Loops...

I'm able to change key in the loops, but once I drag that loop, in it's changed key, to my track, the sound reverts back to the original key. How do I record the loop in the changed key? Thanks!

Select the region and choose Region > Bounce in place
or solo the track and set the cycle area to fit the region (apple loop) and choose file > Bounce

Similar Messages

  • Changing key of a loop?

    Can I change the key of a loop (say, from A to D) to accompany tune, so that the same loop is used in the track in different keys?

    Yes, you can.
    Add a new copy of your loop to the track in the timeline, select it, and in the track editor enable "follow tempo and pitch" (for real instrument loops) and adjust the pitch slider. You will see the transposition in the lower left corner of the loop (in half note steps).
    Regards
    Léonie

  • Changing keys in apple loops

    I just bought GB3. I can make simple songs with loops and I have no problem using my guitar via Imic. Is there a way to change the keys on the loops? For example, if I am recording a simple blues progression of C,F G and using the same drum loop I want to use C, D, G, C. So far, I haven't figured out how to do this. Is it possible?
    Thanks
    Kenny

    You can adjust the loop's pitch in halftone steps with a slider in the editor window. So if you have a loop in C, setting the slider to +5 (or -7) will turn it to F, +7 (or -5) to G.
    Don't expect spectacular results, though. Pitch-shifting an audio loop also alters its tonal characteristics, anything beyond 2 steps tends to sound unnatural.

  • How change key of a loop?

    When I audition loops -- both MIDI (green) and Audio (blue) -- I see that I can play them in a different key than how they are listed.
    Once I drag that loop to a track, how do I then manipulate the key that it is in?
    Thanks.

    Select the region (loop) in the Arrange. On the left is Region Inspector with settings to transpose the region up or down.
    Or in Global Tracks right click and select to show the Transposition global track. Here you can transpose all regions in specific parts of the arrangement.
    JG

  • Assigning Keys to Apple Loops in Logic

    I am creating Apple Loops in Logic by selecting an audio region and then selecting "Add to Apple loops library" under the mini region menu.
    The manual states that whatever key I set in Global tracks is the key that is assigned to the loop. This works well for pitched material, but for non pitched material I don't want a key designated. I have noticed that when I set a tag to the loop of "Drums" no key is assigned, but when I set a tag of "Percussion" the key does get assigned to the particular loop. This is a problem because the pitch of the percussion changes when that Apple Loop is brought back into another Logic session that has a different key assignment the a particular loop on the Global Track.
    I understand I can designate "No Key" in the Apple Loops utility, but I prefer to make my loops straight from the Logic arrange window. I am finding the Apple Loops Utility a bit buggy. Does anyone know the most recent version of the Apple Loops Utility?
    Thank you for your help.

    Any word on a fix for this?
    I've found Apple Loops VERY buggy in L9! Not only do they not loop correctly in the browser when your project is at a sample rate other than 44.1 (for example, working for broadcast at 48k as I mostly do), but I've also seen them behaving weirdly in the arrange page.
    Today I had a truncated Apple Loop in a project which would play back differently on subsequent attempts. Sometimes it would get to bar 4, for example, and other times it would only get midway through bar 3...! And this is with basic Apple factory installed loops.
    What's up with this? I've already re-indexed and re-installed the loops. No change. No fix.
    Totally unprofessional, Apple.

  • Is there somebody out there to shed some light on this? Change keys, tempo in Soundtrack Pro greyed out?

    From the amount of posted unanswered questions like mine one should be able to see that there are more than a few people confused about the greyed out "Change keys, tempo in Soundtrack Pro" (and for that matter in Apple Loops Utility, Logic, GarageBand)! What does it take to help out the less adept budding beginners? Please don't post read the manual or search for... we all know you can spend days with no results. There is nothing better than a friendly person (wizard) who knows and has done it all, giving clear step by step instructions. Please lay it out for us lesser brains. Thank you so much for your time and patience.

    rs = stmt.executeQuery("SELECT gender FROM gymuser WHERE Username= 'userName' ");
    in this line i think there is some error put it like this
    rs = stmt.executeQuery("SELECT gender FROM gymuser WHERE Username= '"+userName+"' ");
    Try to put some SOPs in between, so that u can check in logs(if using tomcat)where u r making mistake.

  • So in the last few days I've noticed that pressing my volume change keys actually isn't changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squar

    So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
    I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
    I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
    Please help!

    You migh give resetting your NVRAM a try:
    http://support.apple.com/kb/ht1379

  • What is the use of logical key in logical tabls in bmm

    hi
    can any one tell me why we have to create logical key for logical table in bmm
    Thanks
    sreedhar

    See the links below
    why we have to create logical key at  levels in Hierarchies
    Re: Business Model - Logical Primary key
    Regards,
    Sandeep
    Edited by: Sandeep Saini on 15-Sep-2010 05:17

  • Ho to change the old Logical System in the new Client?

    Hi All,
    after a Client copy, I've to change the old Logical System in all the relevant SAP tables in the new client.
    In the Co tables too, such as CSKS.
    Could anyone tell me hoq to do it?
    Thanks
    G.Rossi

    Hi,
    So the only solution would be to rename the SID of one portal.-> Yes,Rename the SID of on portal
    Can this be done ? -> Yes,It can be done
    How is it done ? -> Use Export/Import method.Export the database of one SID. Import the same with different SID.
    Thanks and Regards,

  • How do you make a photo in DW that changes automatically in a loop and needs  no visable buttons

    How do you make a photo in DW that changes automatically in a loop and needs  no visable buttons?

    I'm sorry to be so vague. I have recently found out that what I want 
    to do is put my images in a javascript image rotator. I have looked 
    this up on google and have now tried about 6 different codes. I try to 
    follow the insert directions but I must be doing something wrong. I 
    get the first photo linked up but can never make the picture change to 
    show the other two photos in the image folder.
    Can you direct me as to how this works in dw?
    Thank you so much for helping.
    Pam

  • Foreign keys in logical fact

    Hi,
    Should I define foreign keys in logical fact table? I need to use "aggregation rule=count distinct" of the foreign key column in my reports.
    Thanks.
    Andy

    Hi Andy,
    You can add the foreign keys to your fact table as a measure column (count distinct aggregation).
    Do not use these foreign keys to create foreign key joins in the logical layer. Always use complex joins (http://obibb.wordpress.com/2010/08/06/joins-in-oracle-bi-ee/)
    Good Luck,
    Daan Bakboord
    http://obibb.wordpress.com

  • Avoiding Logical Loop Error while defaulting values

    Hi Experts,
    We have a requirement where lets say Attribute A and Attribute B are displayed on the screen, we need to default value for Attribute B to NA if value of Attribute A is set by the user to "XYZ", else whatever value user enters in Attribute B will be set. To achieve this, we are setting the value of the Attribute B in the rule document. If we use the validation rule table like mentioned below, it throws a logical loop error:
    Attribute A
    “NA”
    Attribute B = "XYZ"
    Attribute A
    otherwise
    To avoid this, we are using a dummy attribute for Attribute A (which is not displayed on the screen) to set in the rule document as mentioned below and this attribute will be shown in the decision report:
    Attribute A Dummy
    “NA”
    Attribute B = "XYZ"
    Attribute A
    otherwise
    The issue is, we are sending the Session data to Siebel through OPA connectors. Now these dummy attributes as mentioned above (which are not displayed on UI) are not sent as part of the Session data as these are inferred attributes.
    Is there any way to:
    1. Solve the logical loop error issue so that we dont have to use the dummy attribute
    2. If we have to use dummy attributes, then how to send them to Siebel as part of session data.

    From:http://www.oracle.com/technetwork/apps-tech/policy-automation/documentation/index.html
    Oracle Policy Automation Connector for Siebel 10.4.4 Developer Help (HTML - Please be patient while the help index loads.)
    Full developer help for OPA Connector for Siebel 10.4.4, from getting started with mapping, to configuring and deploying rule projects, and handling session data being passed to and from Web Determinations. Includes information on the new Siebel integration object approach available since the 10.3 version of this connector. Note that only rulebases developed with Oracle Policy Modeling 10.4.0, 10.4.1, 10.4.2, 10.4.3 or 10.4.4 can be deployed to OPA Connector for Siebel 10.4.4.
    Specifically,  see the Topics under "Data Mapping" in the table of contents.

  • Garage Band '11, version 6.0.5 will not change key after new project is started

    Garage Band '11 version 6.0.5:  Cannot change key after new project is started.
    It has always worked ok prior to this. And I have had other issues. How do I reinstall Garage Band '11?
    I have looked in downloads, but can'ty find any download file. I had upgraded to Mac OSX 10.6.8 couple years back, which included
    Garage Band '11, a new ITunes & new IPhoto.

    Before reinstalling I'd try HangTime's fix for "oddball" problems and delete the User preferences and repair permissions, see the FAQ:
    http://www.bulletsandbones.com/GB/FAQPages/OddBallProbs.html
    The GarageBand 6.0.5 update is here: 
    GarageBand 6.0.5
    If you want to reinstall, install again the GaragaBand application from your installation disk and then upgrade again to 6.05 using the link above or Software update from the Apple Menu.
    Regards
    Léonie

  • How to change language in Logic Studio?

    My MacBook is Mac OS X 10.5.6, the system language is Traditional Chinese,
    I want to fill English in my Logic Studio, even though I choose the English when filling software,
    Logic Studio still run Simplified Chinese,
    How to change language for Logic Studio,
    May I have any master help me, Please.
    Thank you.

    Try this.
    Quit Logic
    Open System Preferences
    Click International
    Click Language tab
    Drag English to top of list
    Quit Sys Pref
    Open Logic
    JG

  • Logical Loop Lunacy

    I'm having trouble with something that will inevitably raise the question 'why the heck would you want to do that anyway?', but here goes...
    Entity 'A' has a one-to-many relationship with entity 'B'.
    There are multiple instances of entity 'B', but one is 'special' in that it's always there, let's call it instance '99'. There is always at least one other instance of entity 'B' with a sequence number 1, 2, 3, 4... for as many instances as exist (up to 98 of them, but more usually 5-10).
    I want to assign a value to an attribute of instance 99 based on a rule that looks at the value of the same attribute across all other instances of the entity.
    The rule is easy, but I keep getting a logical loop as I'm using the attribute stated in the conclusion in the condition. However, in the condition I'm actually only using the attribute stated within the scope of the instances of the entity that are specifically not the instance implied in the conclusion (although I know of no way to specify which instance I want in the conclusion, hence the logical loop).
    I think I need some sort of 'conditional scope' function...
    Any ideas? I'd rather not (as I have had to currently) define a new attribute within entity 'B' specifically to be the equivalent attribute to the one I'm trying to derive as the 'IT' side of OPA is outsourced and I'd rather not have the issue of testing they've mapped the 'equivalent' attributes (this is an example of something I need to do for a number of attributes) to the correct fields in the database - those being the same as those fields for the 'non-equivalent' attirbutes!
    My head hurts - apologies if your's does now as well...
    Thanks,
    Alex

    Alex,
    If you are using 10.2, you can just mark the involved rules as being part of a rule loop - it sounds perfectly fine in your example as it is just a rule loop rather than being a data loop.
    Otherwise I would just do it with two attributes - the existing attribute that you collect, with the second one being:
    * the value of the existing attribute if it isn't instance '99'
    * the computed value if it is instance '99'
    That way you at least get a final attribute that splices together the base and computed values.
    Regards
    Andrew

Maybe you are looking for