Changing latency type to interleaved

How could I get that done?
Thanks for assistance

ADSL Line Status
Connection information
Line state:
Connected
Connection time:
0 day, 17:13:09
Downstream:
15,892 Kbps
Upstream:
992 Kbps
  ADSL settings 
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Fast
Noise margin (Down/Up):
6.4 dB / 5.2 dB
Line attenuation (Down/Up):
30.5 dB / 16.3 dB
Output power (Down/Up):
21.0 dBm / 12.1 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
1690 / 3885
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
15105 / 3884
Error Seconds (Local/Remote):
0 / 3573

Similar Messages

  • I'd like to change my latency type from Interleavi...

    I would like to change my latency type from Interleaving to Fast. How would I go about doing so/who do I contact.
    I have checked previous threads, but old links on such threads do not work anymore.
    Solved!
    Go to Solution.

    Thanks for the quick reply. Things make more sense now. I read up about the DLM and yes apprently it must have changed it over around the time I had a lot of visitors with their laptops and what not. This is just an educated guess here but a lot of resetting of the router went on during their visits, at least once or twice a day for a while now and it's possible THAT is what made the change of the latency setting.
    It may be fine if I just advise everyone to not touch it at all and it will change back in a period of time. But just to check because I do know myself that the line and connection was pretty stable even before all this, with a lot better latency (which is what I want the most). Is it possible to force change it back? Thank you.

  • How to change latency type to fast?

    How to change latency type to fast?

    ADSL Line Status
    Connection information
    Line state:
    Connected
    Connection time:
    5 days, 03:08:00
    Downstream:
    16,403 Kbps
    Upstream:
    948 Kbps
      ADSL settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    3.1 dB / 4.7 dB
    Line attenuation (Down/Up):
    30.5 dB / 16.2 dB
    Output power (Down/Up):
    20.9 dBm / 12.2 dBm
    FEC Events (Down/Up):
    313987846 / 3701
    CRC Events (Down/Up):
    2155 / 18271
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    HEC Errors (Down/Up):
    49173 / 14016
    Error Seconds (Local/Remote):
    0 / 17361

  • BT Infinity - Changing Latency type

    Hello!
    I have read a few articles that say that you cant change your latency type from Interleaved to Fast Path with BT Infinity because the modem is in a little white box and not part of the HH.
    This is only the case for some people though. I still connect with the telephone wire and not the WAN port. I have always had a brilliant connection (noise wise etc.) and have always hit the theoretic max of my broadband on ADSL2 and now VDSL.
    Would I be able to request my latency type be changed to Fast Path (as I assume it isn't that, although you can't tell with modern HH's) as I do not have this seperate modem box?
    Thanks,
    Craig

    That's right, you can't. DLM handles the transition automatically.
    If you found this post helpful, please click on the star on the left
    If not, I'll try again

  • Changing latency type to fastpath

    I would like to have my latency type changed from interleaving to fastpath I have asked previously via live chat and they didnt end up changing it for me, thanks.
    Solved!
    Go to Solution.

    You would need to provide connection information here, and get advice from forum members before anything could be done.
    What are your ADSL Statistics  and BT Speedtester results please?
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Want to change latency type on my line

    Last year I had a new line laid into my home after 3 years of problems with the old one. Earlier this year I opted for the upto 20 Meg speed, my line is outputting around 18.6 which is fine however recently i've been experiencing disruption to my line.
    Sometimes the Hub will reset itself, then when it comes on the broadband light flashes yellow for ages whilst the other lights are blue sometimes upto 5 mins will go by, requiring me to reset it manually to achieve a stable blue light & connection.
    I've checked my latency type and found its interleaved. My old line was Fast type as I a game alot and I need a fast stable connection. I think it must have been an oversight when they connected my new line at the exchange they forgot to use the same settings, I do have an I-plate installed so its not an interference thing either.
    Is there anyway I can get my Latency set to Fast type please?. My download speeds are stable although sometimes erratic so its not a line problem I have just an exchange setting.

    DC74 wrote:
    Right, then clearly theres something not quite right with my line then, shouldn't be taking ages to re-sync after a reset. Is fast latency still better for gamers though?
    Depends on your definition of "better for gamers".....
    You either have an interleaved connection that affords stability, maintained IP profile, and maximum sync rate, with maybe the addition of roughly 20-40 milliseconds latency to server connections, as a worst case scenario.
    Or you have a slightly lower latency connection, with no forward error correction, possible rise in noise margin, resulting in lower sync speeds and associated IP profile and throughput.
    A no brainer really ....  over to you.   

  • Latency type changed from fast to interleaved

    My Latency type as changed from Fast to Interleaved, why?
    From - Latency type: Fast
        To - Latency type: Interleaved
    Can it be changed back to fast ?
    Since it as changed, it feels like my broadband is now being capped. It as become slow  .5mb when usually I was getting 1.9mb.
    ADSL Line Status
    Connection information
    Line state: Connected
    Connection time: 3 days, 11:47:08
    Downstream: 19,661 Kbps
    Upstream: 1,164 Kbps
    ADSL settings
    VPI/VCI: 0/38
    Type: PPPoA
    Modulation: G.992.5 Annex A
    Latency type: Interleaved
    Noise margin (Down/Up): 2.6 dB / 6.2 dB
    Line attenuation (Dwn/Up): 22.0 dB / 10.9 dB
    Output power (Dwn/Up): 0.0 dBm / 12.3 dBm
    FEC Events (Down/Up): 117943179 / 717
    CRC Events (Down/Up): 220069 / 238
    When using Facetime,the conversations on the devices have become very broken!!
    Thank you
    Solved!
    Go to Solution.

    I did a quiet line test and the result was Ok, no noise on the line.
    Here are my stats including the hidden errors:
    ADSL Line Status 08:43 on the 13/03/2013
    Connection information
    Line state:
    Connected
    Connection time:
    0 day, 19:38:32
    Downstream:
    19,075 Kbps
    Upstream:
    1,197 Kbps
    ADSL settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    3.4 dB / 5.9 dB
    Line attenuation (Down/Up):
    22.0 dB / 11.0 dB
    Output power (Down/Up):
    0.0 dBm / 12.7 dBm
    FEC Events (Down/Up):
    18336078 / 133
    CRC Events (Down/Up):
    78366 / 37
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    HEC Errors (Down/Up):
    10689528 / 29
    Error Seconds (Local/Remote):
    0 / 17

  • Latency Type Change Request - Interleaved to Fast ...

    Hey there I would like to request to have my Latency Type changed to Fast Path for better gaming experience 
    here is my HH4 stats:
    Thanks
    Darren
    1. Product name:
    BT Home Hub
    2. Serial number:
    +068343+NQ41704711
    3. Firmware version:
    Software version 4.7.5.1.83.8.173.1.6 (Type A) Last updated Unknown
    4. Board version:
    BT Hub 5A
    5. WAN:
    PPP Connected
    6. Data sent/received:
    1.0 GB / 1.5 GB
    7. Broadband username:
    [email protected]
    8. BT Wi-fi:
    No
    9. 2.4 GHz Wireless network/SSID:
    BTHub5-KP2X
    10. 2.4 GHz Wireless connections:
    Enabled (802.11 b/g/n (up to 150 Mb/s)) 20 MHz, WPS enabled
    11. 2.4 GHz Wireless security:
    WPA2
    12. 2.4 GHz Wireless channel:
    Automatic (Smart Wireless)
    13. 2.4 GHz Wireless network/SSID:
    14. 2.4 GHz Wireless connections:
    Disabled
    15. 2.4 GHz Wireless security:
    None
    16. 2.4 GHz Wireless channel:
    Automatic (Smart Wireless)
    17. 2.4 GHz Wireless network/SSID:
    BTWifi-with-FON
    18. 2.4 GHz Wireless connections:
    Disabled
    19. 2.4 GHz Wireless security:
    None
    20. 2.4 GHz Wireless channel:
    Automatic (Smart Wireless)
    21. 2.4 GHz Wireless network/SSID:
    Auto-BTWiFi
    22. 2.4 GHz Wireless connections:
    Disabled
    23. 2.4 GHz Wireless security:
    None
    24. 2.4 GHz Wireless channel:
    Automatic (Smart Wireless)
    25. 2.4 GHz Wireless network/SSID:
    26. 2.4 GHz Wireless connections:
    Disabled
    27. 2.4 GHz Wireless security:
    None
    28. 2.4 GHz Wireless channel:
    Automatic (Smart Wireless)
    29. 5 GHz Wireless network/SSID:
    BTHub5-KP2X
    30. 5 GHz Wireless connections:
    Enabled (802.11 a/n/ac (up to 1300 Mb/s)) 80 MHz, WPS enabled
    31. 5 GHz Wireless security:
    WPA2
    32. 5 GHz Wireless channel:
    Automatic (Smart Wireless)
    33. 5 GHz Wireless network/SSID:
    34. 5 GHz Wireless connections:
    Disabled
    35. 5 GHz Wireless security:
    None
    36. 5 GHz Wireless channel:
    Automatic (Smart Wireless)
    37. 5 GHz Wireless network/SSID:
    BTWifi-with-FON
    38. 5 GHz Wireless connections:
    Disabled
    39. 5 GHz Wireless security:
    None
    40. 5 GHz Wireless channel:
    Automatic (Smart Wireless)
    41. 5 GHz Wireless network/SSID:
    Auto-BTWiFi
    42. 5 GHz Wireless connections:
    Disabled
    43. 5 GHz Wireless security:
    None
    44. 5 GHz Wireless channel:
    Automatic (Smart Wireless)
    45. 5 GHz Wireless network/SSID:
    46. 5 GHz Wireless connections:
    Disabled
    47. 5 GHz Wireless security:
    None
    48. 5 GHz Wireless channel:
    Automatic (Smart Wireless)
    49. Firewall:
    Disabled
    50. MAC Address:
    40:f2:01:16:3a:d2
    51. Software variant:
    52. Boot loader:

    What device does the Homehub5 plug into on the WAN side?
    Some sort of modem?
    If you found this post helpful, please click on the star on the left
    If not, I'll try again

  • Latency type change (Slow speeds)

    Hi there,
    I would like to request to have my Latency Type changed to Fast Path please, I understand the mods are able to help with this - here are my HH4 stats if they're needed?
    Thanks in advance
    1. Product name:
    BT Home Hub
    2. Serial number:
    +068340+NQ31922187
    3. Firmware version:
    Software version 4.7.5.1.83.8.130.1.17 (Type A) Last updated 03/05/14
    4. Board version:
    BT Hub 4A
    5. ADSL uptime:
    0 days, 00:18:20
    6. Bandwidth:
    1163 / 6648
    7. Data sent/received:
    0.3 MB / 0.5 MB
    8. Broadband username:
    [email protected]
    9. BT FON:
    Yes
    10. 2.4 GHz Wireless network/SSID:
    BTHub4-ZFGN
    11. 2.4 GHz Wireless connections:
    Enabled (802.11 b/g/n (Recommended)) 20 MHz, WPS enabled
    12. 2.4 GHz Wireless security:
    WPA and WPA2
    13. 2.4 GHz Wireless channel:
    Automatic / 6
    14. 5 GHz Wireless network/SSID:
    BTHub4-ZFGN
    15. 5 GHz Wireless connections:
    Enabled (802.11 n 40 MHz (Recommended)) 20/40 MHz, WPS enabled
    16. 5 GHz Wireless security:
    WPA2
    17. 5 GHz Wireless channel:
    Automatic / 40
    18. Firewall:
    Default
    19. MAC Address:
    cc:33:bb:1a:67:e4
    20. VPI/VCI:
    0 / 38
    21. Modulation:
    G.992.5 Annex A
    22. Latency type:
    Interleaved
    23. Software variant:
    24. Boot loader:

    can you go to troubleshooting then logs/wan and post the 2 lines of stats which would be very recent  look something like this
    17:36:06, 23 Feb.
    (580656.970000) DSL noise margin: 6.00 dB upstream, 9.70 dB downstream
    17:36:05, 23 Feb.
    (580656.900000) DSL line rate: 352 Kbps upstream, 928 Kbps downstream
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Slow Speed after Latency type has been changed

    Hi,
    the last few days I have noticed that my broadband speed has gone down hill big time.. according to speedtester.bt.com my DSL connection rate is: 20504kbps (down-stream) and my IP Profile is 18090kbps, but my download speed is 2411kbps which is below the acceptable range for my connection. 
    I logged onto my BTHH3 and found that my latency type has changed from Interleaved to Fast, I have noticed that my CRC & HEC (down) are much higher than before..
    Should I leave it for a few days to see improvment or ask the mods to change the latency type back to Interleaved
    Thanks in Advance
    Andy
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Fast
    Noise margin (Down/Up):
    3.7 dB / 5.0 dB
    Line attenuation (Down/Up):
    18.2 dB / 9.4 dB
    Output power (Down/Up):
    16.4 dBm / 12.7 dBm
    FEC Events (Down/Up):
    0 / 21224
    CRC Events (Down/Up):
    102683 / 4252
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    722956 / 10595
    Error Seconds (Local/Remote):
    2061 / 2095

    Results from Speedtester.bt.com
    Download speedachieved during the test was - 3887 Kbps
     For your connection, the acceptable range of speeds is 4000-21000 Kbps.
     Additional Information:
     Your DSL Connection Rate :20376 Kbps(DOWN-STREAM), 1176 Kbps(UP-STREAM)
     IP Profile for your line is - 17976 Kbps
    Upload speed achieved during the test was - 917 Kbps
     Additional Information:
     Upstream Rate IP profile on your line is - 1176 Kbps
    I also re-installed my BT HH2 and that connects using Interleaved as to Fast via BT HH3, while my HH2 is connected I get 15.82mbps via speedtest.net but I keep losing my connection - don't think my HH2 likes 3.7 dB (down) noise margin.. but if I re-connect my HH3 I have a steady connection but 1.6 to 2.2mbps via speedtest.net
    I think its time to get a new non-bt router/modem....?

  • Latency type change

    Hi Folks thanks for reading. I have tried to ring the BT brioadband help line but found it very difficult to comunicate what I want to happen. As an Avid gamer I would like to change my lattency type to Fast please see me connection Details Below 
    1. Product name:
    BT Home Hub
    2. Serial number:
    +068340+NQ31921469
    3. Firmware version:
    Software version 4.7.5.1.83.8.130.1.17 (Type A) Last updated 11/09/14
    4. Board version:
    BT Hub 4A
    5. ADSL uptime:
    5 days, 19:48:17
    6. Bandwidth:
    448 / 8128
    7. Data sent/received:
    493.5 MB / 214.1 MB
    8. Broadband username:
    [email protected]
    9. BT FON:
    No
    10. 2.4 GHz Wireless network/SSID:
    BTHub4-NTW5
    11. 2.4 GHz Wireless connections:
    Disabled
    12. 2.4 GHz Wireless security:
    WPA and WPA2
    13. 2.4 GHz Wireless channel:
    6
    14. 5 GHz Wireless network/SSID:
    BTHub4-NTW5
    15. 5 GHz Wireless connections:
    Disabled
    16. 5 GHz Wireless security:
    WPA2
    17. 5 GHz Wireless channel:
    Automatic / 0
    18. Firewall:
    Default
    19. MAC Address:
    cc:33:bb:1a:35:68
    20. VPI/VCI:
    0 / 38
    21. Modulation:
    G.992.1 Annex A
    22. Latency type:
    Interleaved
    23. Software variant:
    24. Boot loader:
    Thanks 
    BenandG

    Hi BenandG
    Welcome to the forum and thanks for posting. Please use the 'contact the mods' link in my forum profile to send in your details and we'll be happy to help. You can find the link by clicking on my username.
    Thanks
    Neil
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Latency type changed back to Fast path

    I recently had my latency type changed back to interleaving however i now get daily disconnections (usualy when recieving a phone call) and my download speed isnt any better, the only difference is an increased latency of around 10-20ms so i would like to have it reverted back to fast path.
    Thanks, Rob.

    Hi backie,
    If you fill out the contact form located in the about me section of my profile again we can look at this for you.
    Cheers,
    Chris
    BT Mod Team
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Want to Change Latency from "Interleaved" To "Fast...

    I used to have "Fast" latency which helped smooth play on xbox live, but when i turned my router on and off over a period of a few days (When i was rearranging my room) i noticed that my internet had slowed down, i checked and i had an "Interleaved" latency type! I wish to go back to "Fast" as it helped.
    Thanks.

    Hi Welcome to the forums
    Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
    once you have posted the information asked for then the community members can help you more
    Thank You
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Latency to high - Interleave needs changing to Fas...

    In game pings are generally round 70ms, i need it to be under 20ms or as lo as possible. I restarted the router last night (as per instructions on the router) prior to this the router had and ADSL uptme of greater than 4 days.
    helpdesk tab from the router:
    1. Product name:
    BT Home Hub
    2. Serial number:
    +068340+NQ32405431
    3. Firmware version:
    Software version 4.7.5.1.83.8.130.1.10 (Type A) Last updated 25/09/13
    4. Board version:
    BT Hub 4A
    5. ADSL uptime:
    0 days, 14:49:08
    6. Bandwidth:
    448 / 8128
    7. Data sent/received:
    182.8 MB / 692.1 MB
    8. Broadband username:
    [email protected]
    9. BT FON:
    No
    10. 2.4 GHz Wireless network/SSID:
    BTHub4-M6MN
    11. 2.4 GHz Wireless connections:
    Enabled (802.11 b/g/n (Recommended)) 20 MHz, WPS enabled
    12. 2.4 GHz Wireless security:
    WPA and WPA2
    13. 2.4 GHz Wireless channel:
    Automatic / 11
    14. 5 GHz Wireless network/SSID:
    BTHub4-M6MN
    15. 5 GHz Wireless connections:
    Enabled (802.11 n 40 MHz (Recommended)) 20/40 MHz, WPS enabled
    16. 5 GHz Wireless security:
    WPA2
    17. 5 GHz Wireless channel:
    Automatic / 40
    18. Firewall:
    Default
    19. MAC Address:
    cc:33:bb:5c:44:f0
    20. VPI/VCI:
    0 / 38
    21. Modulation:
    G.992.1 Annex A
    22. Latency type:
    Interleaved
    23. Software variant:
    24. Boot loader:

    please could u enable "fast" as latencey is till too high:
    1. Product name:
    BT Home Hub
    2. Serial number:
    +068340+NQ32405431
    3. Firmware version:
    Software version 4.7.5.1.83.8.130.1.10 (Type A) Last updated 25/09/13
    4. Board version:
    BT Hub 4A
    5. ADSL uptime:
    3 days, 09:14:35
    6. Bandwidth:
    448 / 8128
    7. Data sent/received:
    560.0 MB / 3.2 GB
    8. Broadband username:
    [email protected]
    9. BT FON:
    No
    10. 2.4 GHz Wireless network/SSID:
    BTHub4-M6MN
    11. 2.4 GHz Wireless connections:
    Enabled (802.11 b/g/n (Recommended)) 20 MHz, WPS enabled
    12. 2.4 GHz Wireless security:
    WPA and WPA2
    13. 2.4 GHz Wireless channel:
    Automatic / 11
    14. 5 GHz Wireless network/SSID:
    BTHub4-M6MN
    15. 5 GHz Wireless connections:
    Enabled (802.11 n 40 MHz (Recommended)) 20/40 MHz, WPS enabled
    16. 5 GHz Wireless security:
    WPA2
    17. 5 GHz Wireless channel:
    Automatic / 40
    18. Firewall:
    Default
    19. MAC Address:
    cc:33:bb:5c:44:f0
    20. VPI/VCI:
    0 / 38
    21. Modulation:
    G.992.1 Annex A
    22. Latency type:
    Interleaved
    23. Software variant:
    24. Boot loader:

  • Which latency type

    Hi,
    apologies if the following query is a dumb one, but I am ignorant when it comes to this stuff
    our broadband is used by one pc hard connected to the home hub and 2 laptops wirelessly.  The pc is used for warcraft and the laptops for bbc iplayer streams etc.
    My question is, would having my latency type changed to fast from interleaved enhance/improve the performance of the pc/laptops when gaming and or streaming?
    Current ADSL info is:
    Connection Information
    Line state
    Connected
    Connection time
    0 days, 00:55:22
    Downstream
    12,954 Kbps
    Upstream
    1,108 Kbps
    ADSL Settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    G.992.5 Annex A
    Latency type
    Interleaved
    Noise margin (Down/Up)
    3.8 dB / 6.2 dB
    Line attenuation (Down/Up)
    33.6 dB / 15.4 dB
    Output power (Down/Up)
    20.4 dBm / 1.6 dBm
    Loss of Framing (Local/Remote)
    0 / 0
    Loss of Signal (Local/Remote)
    0 / 0
    Loss of Power (Local/Remote)
    0 / 0
    FEC Errors (Down/Up)
    690 / 0
    CRC Errors (Down/Up)
    29 / 0
    HEC Errors (Down/Up)
    459 / 0
    Error Seconds (Local/Remote)
    17 / 0

    No, changing the latency to fast could introduce a lot of CRC errors, which would slow your connection down.
    You need to avoid all wireless connections if you want good streaming performance.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Maybe you are looking for

  • Can I save acrobat cloud PDF files back to windows phone 8.1?

    I've backed up my (sandboxed) PDF files from Acrobat Reader on my Windows Phone 8.1 to Acrobat.com (Cloud). How Can I restore (save) them back to the phone? I understand I can view them in/from the cloud but how to get them back on the phone locally?

  • Search finds information in notes but when I open the note it's not there.  Where is it?

    I have just upgraded to iOS6 and synced before doing so.  Now my notes are old ones from the computer and new additions not there.  If I search for them on the front screen they are referenced but not on note when I use link.  How do I get back notes

  • MSI GX60 problem sata3 HDD

    I have a problem with with the 500 GB hdd Hitachi Travelstar Z7K500 HTS725050A7E630 in one of the slots in the laptop GX60 (slot DVD drive). The Russian Support Center could not help and advised to contact with support center - "for the objective dia

  • DB12 - Overview of REDO logfiles - Not yetbackedup - 300 Maximum

    Experts............... In DB12.. Under Redo Log Backups on Overview of redo log files ....it shows maximum ...300..... but actually my "oraarch" directory contains 300+ archives , but it still shows "300" as highest number in DB12... How we can fix a

  • ITunes has stopped working - would appreciate assistance

    The only thing that was done was I backed up and synched two iPhone 5's. Several hours later I reopened iTunes and recieved the following error: iTunes has stopped working Problem signature:   Problem Event Name:    APPCRASH   Application Name:    iT