Changing LEAD info using BAPI_LEAD_CHANGEMULTI

I have tried to change the status and product info. using BAPI_LEAD_CHANGEMULTI. I am able to change status and volume unit, but not the quantity of product.
How can I change the quantity of the product ??????
how do I add more than one product ???
regards,
Ashish Walke

Hi,
I did this before.
Search "Quantity change using CRM_ORDER_MAINTAIN" in the forumns and you will see my reply.
Thanks
kamal

Similar Messages

Deleted e-mail account used for Icloud--now I cannot change my info without having that e-mail but it's gone! What do I do?

Deleted e-mail account used for Icloud--now I cannot change my info without having that e-mail but it's gone! What do I do?

Please answer me .
Now I created iCloud Mail Alias on iCloud which name [email protected] Then I want to switch iCloud Mail Alias to be iCloud IMAP.
My problem is I don't want that old mail which my boyfriend used to created - [email protected] and [email protected] - .
How can I do?
Please.

A student has changed something while using an iPad so that the iCloud is using her personal imail account for the other 90 iPads. I've tried to change the preference in iCloud to no avail please help

While in Apple ID, the primary address is correct which is our college. The iCloud however is using the icloud email address of the student who formerly borrowed the iPad. I have gone to preferences in an attempt to change the email address, thinking she may have used this as an alias, but it is not posted as an alias. I am stumped on how to fix this. Each time she does something via her personal account, it affects the other 90 iPads in the program & whenever any email is involved it lists her as the sender.

What you have described above contradicts to my information. If you did delete icloud account, there is no way you should see her iclud mail account and if it is not icloud - you just need to delete it as well.
Most likely you just receiving her emails right now and after you delete mail account you should be all set.
Go to settings - mail contacts calendars. Find her account and click - you will see delete button below. When done - e-mail that you changed billing info should disappear. Check it.
Other ipads are not affected and you didn't show in anyway that they are. That is the article that will allow you to check if school billing info is still the same in itunes store.
iTunes Store: Changing account information - Apple - Support

ITunes denies me the ability to change the info of my media. Anyone have the same problem?

Whenever you desire to change the information on a certain music file or movie you've saved to your apple device (In my case, an iPhone 4S), the only things that pop up on screen are the "Play (Insert name of media here)" or below that: "Get info". And even if you do click on "Get Info", you can only LOOK at the info already there and you can't change it! Before this problem arose, there used to be a long list of options you could select from for that specific media file you chose. Things like ratings, copy, delete, consolidate files, get artwork, etc. were at my fingertips, and now iTunes has refused me these luxeries! The thing I miss the most is being able to click on the "Get Info" option and actually CHANGING THE INFO of the media file instead of just looking at it with the color of the font being gray and not allowing you to change it! If I wanted to rename a video I got from the internet or give proper credit to the person who uploaded said video, I could do so in the past, but not now! Also, I cannot drag a music track or video file from my Video files of my computer's hard drive and place them into my Movies of iTunes or my iPhone 4S! It used to be so quick and easy to click and drag what you wanted into your device, But now it's just such a pain! I ask if anyone has this same problem and better yet, if anyone has a solution to this? All considerate thoughts and actions are appreciated. Thank you.

When you click Write and open the new message editor, press Alt to show the Menu Bar, then enable all the toolbars under View/Toolbars. Plus, press F9 to show the Contacts sidebar.

Icloud lists 2 email addresses. How can I change it to use just one.

icloud lists 2 email addresses. How can I change it to use just one?

Sign out of iCloud on the iCloud system prefs. Then, sign in with your new.
However, purchases from iTunes and the Mac App store are forever tied to the old AppleID. There is no way to change that short of deleting the old purchases and purchasing new under the new AppleID.
Based on everything that has happened lately with people using social engineering to gain access to other people’s AppleID’s, you need to speak to someone at Apple regarding your account. If you think you knew the answers to your questions and you are not getting emails anymore, someone may have gained access to your old account and has changed all of that info.

Change the info. in control record?

hi...
how 2 change the information in control record?Not in ALE?
bye.

you can use the various options in the IDoc adapter and change the info in the control record.
http://help.sap.com/saphelp_nw04/helpdata/en/96/791c42375d5033e10000000a155106/content.htm
The options like;
1. Apply Control Record Values from Payload
If you set the indicator, the conversion of communication parties to the IDoc partner is only possible for systems that are not logical systems.
If you do not set the indicator, all combinations of communication parties and services are handled as services without party.
If the IDoc XML structure contains a control record during outbound processing on the Integration Server, it is rejected and created again by the IDoc adapter. If you want to include additional values in the control record, set the indicator and provide an appropriate mapping for the values.
Take Sender from Payload
If you want to take the sender of the message from the payload and not from the configuration information in the Integration Directory, set this indicator.
If you do not set the indicator, the information is taken from the configuration in the Integration Directory.
Take Receiver from Payload
If you want to take the receiver of the message from the payload and not from the configuration information in the Integration Directory, set this indicator.
If you do not set the indicator, the information is taken from the configuration in the Integration Directory.
To know more abt the control records, ref: http://help.sap.com/saphelp_nw04/helpdata/en/13/95244269625633e10000000a155106/content.htm

How can I edit my EXIF Date info without changing Time info?

I recently went on a shoot with three cameras, one of which was set at the wrong date (sometime in 2012). I now want to correct all the date stamps on the photos taken by the camera with the bad date settings but am finding this next to impossible to do quickly - I have 416 incorrectly dated photos.
In iPhoto '06 you could go to Photos - Batch Change and a dialogue would pop up with separate Date and Time boxes; I am using iPhoto '08 which has merged these two fields into one, meaning I now lose the correct Time of Day EXIF metadata for each photo I try to change the incorrect Date EXIF metadata on.
I have googled for a separate app to do this, but none do this - they all seem to change everything in one go.
How can I fix my problem and change only the Date info while keeping the existing Time info in a Batch process?

Like I say it's a while since I used 08, but I can certainly roll back 365 or even 400 days on iPhoto 11, without changing the time using the adjust date and time command.
Aperture uses exactly the same mechanism.
It's even longer since I used iPhoto 6.
I did a quick google search and found this:
http://joemaller.com/970/date-shifting-in-iphoto-08/
This shows exactly the same process as iPhoto 09, 11 and Aperture, and exactly what I can use to time shift a group of photographs.
I don't think that the 08 apps were "dumbed down" at all. If I recall correctly, iPhoto gained lossless editing at that point - a very significant enhancement, and no, I don't think there was any effort to push people to change to more expensive products. IIRC every version of iPhoto since then has been less expensive. Apple did do a major rewrite of iMovie at the point, but left iMovie6 available for free as a download for two years. iMovie 11, though a very different interface, has long since overtaken iMovie 6 in capability.
Regards
TD

I just downloaded an iphoto update and when I tried to share my photos was asked for email and password. I must have typed in the info wrong because I keep getting an error message. I don't see how to change the info to the correct mistake..

I just downloaded an iphoto update and when I tried to share my photos was asked for email and password. I must have typed in the info wrong because I keep getting an error message. I don't see how to change the info to the correct mistake..

I too added 2nd apple ID when I tried to get Free app from apple store just to get to NONE on the credit card needed. It said it sent confirmation email to my new apple ID email that I have to confirm. Problem is I can not get to the new apple ID email account. On my ipad it logs into my original email account and I see no where to log into another email account. If I go to my laptop, the new apple ID I created does not let me log into email where apple said it was sent to. It did not send to back up email account either.
Can I log into 2 email accounts on my ipad where it says mail at bottom?
Can I have 2 apple ids?
If I created a 2nd apple id to get to NONE on credit card needed, can't I log into it also on another laptop in gmail?
(won't let me)
If I used my original apple id I created when I got my new ipad, it will not let me get free app without credit card, there is no where it says NONE needed. I am too new to apple to start with credit cards etc until I get use to it.

Changing Lead Status

Hi All,
I am trying to change lead status when saving. I have configured action profile as follows:
Created new action in action profile
Processing type: Method Call
Method Used: Complete_document ( Am I using right Method?)
Processing Parameters: PROCESS_TYPE = LEAD (LEAD is my TX type)...Here I have dout ...which parameter I have to pass here.
Created new condition
Defined start condition as follows:
&CRM Lead.System Status& = I0802 ( I0802 = Complete).
Gun....Thanks for your inputs to my previous question...I have given max points..
Please help in this issue.
Thanks,
Ajay

Hi again Ajay,
Using method COMPLETE_DOCUMENT, you don't need to set any parameter.
I still don't get you for start condition :
&CRM Lead.System Status& = I0802 ( I0802 = Complete).
Because using COMPLETE_DOCUMENT, once you run it, it will set the document
system status to I1005 - COMPLETED.
Is &CRM Lead.System Status& = I0802 your last system status you want to
change to I1005 ?
Hope this could help.
Gun.

How to make changes to info in iTunes appear on my iPod Classic

What am I missing? In earlier versions of iTunes I could change the info on an imported CD, for instance, and when synced it would appear on my iPod. For instance, if the database doesn't supply a "composer" for an album I could put one in and then find that album by scrolling through composers on the iPod. Now (with a new 160gig Classic and the latest iTunes) the tags just don't seem to "take", although they continue to appear as changed on my iTunes screen. It seems to be a general problem with revising the tags but I choose this as a simple example. Is there some settings procedure I'm not following on either iTunes or the iPod? Or what?

Such changes should be mirrored to the device if you automatically sync the device. What happens if you make sure the *Sync only checked items* option is enabled, uncheck the tracks, sync, recheck them and sync again? Any better? If not the only other thing I can think of is that iTunes seems not to manage files with multiple tags terribly well. It may be possible to rebuild the tags as follows. Selecting some affected tracks, right/cmd click and use the option Convert id3 tags > None. Repeat once or twice. Once you have confirmed that no tags are present (look in Explorer/Finder) you can replace the tag information using Convert id3 tags > V2.3 (I believe it is recommended to avoid using V2.4). You will have to manually repair artwork if was embedded.
tt2

Change brush sizes using [ ] too slow

I've recently swapped from Windows to Mac and I'm glad to be on Mac now. But whenever I'm changing brush sizes using the bracket keys the response time is way to slow.. I search the forum but found nothing on this. anyone have a fix for this..
Running Leopard with OS 10.5.4 three internal harddrives and 10 gigs ram.
All updates and patches were installed prior to photoshop.
Machine is one week old.

I completely remove Photoshop and did a clean install. Before changing anything I opened an image and tried increasing and decreasing my brush size using the bracket keys and everything was fine. The brush changes as soon as you hit the bracket key.
But as soon as you highlight the info palette top right corner and make it active then come back over the picture and try changing the brush size I'm getting a one second delay. If I hit the bracket key three times quickly the brush completely disapears and then reapears at the appropriate size.
This is a clean install with no plugins, no new fonts, no new nothing.
I then downloaded the latest upgrades.. Reset disk permission, ran the chron scripts and I'm getting the exact same reaction from photoshop when attempting to change brush size with the bracket keys.
Can anybody else reproduce this buy highlighting the info palette??
I called a buddy who also recently purchased a new Mac Pro and his machine is doing the exact same thing.

Lead time using credit release date

Hi sap Gurus ,
How the Sap System should have capability to calculate the lead time using credit release date as starting date need flexibility change the lead time and How to configure in sap
Thanks & Regards
rajesh

Hello,
I don't think there is a config provision for the same in R/3. You need to talk to an ABAP expert to check the possibilityof an enhancement.
Prase

Hoy can I change the info in Apple id already created to not include a crédito card

How can I modify an Apple tu use it without a credit card

If you want to remove your credit card then on your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link. If you are doing it on an iOS device (iPad, iPhone or iPod Touch) then you could try tapping on your id in Settings > Store (Settings > iTunes & App Store on iOS 6+) and selecting 'View Apple ID' on the popup - that should also give you a payments link on your account's page.
Changing payment info : http://support.apple.com/kb/HT1918

Making iTunes automatically change track info of playlists

Hello all,
I'd like to know if there is a way to automatically change song info of all the tracks in a specific playlist.
More specifically, I'd like to know how to make itunes automatically change the Grouping of songs as I add or remove them from any given playlist.
Ultimately, what I'd like to be able to do is see which songs are set to sync with my iPhone and which aren't when I'm looking through my entire music library.
Maybe there's a solution using Automator or Applescripts. I tried using smart playlists, but those seem to only be able to populate a playlist based on track info, which is the opposite of what I want to do.
Thank you all in advance for your help,
Scott

I suspect iTunes is revealing "corrections" made by Windows Media Player. If so the damage is done and you'll probably find other tracks have been affected over time.
See my post on Getting iTunes & Windows Media Player to play nicely. Most importantly uncheck the WMP options as displayed in the final image.
tt2

Cant change song info on new ios update

ok ever since i updated to iOS5 i cant change the song info on my ipod touch when i change the info on itunes?!?! it syncs but song info dosnt change ie. the song name,album.

check out does iTunes detect song codec and ID3-tag is v.2.3 or 2.4. If iTunes shows that it's unknow, you can't change tag ..... it's a bug which appeared in 10.5.x
I have the same problem when dropping songs into device, but there is a solution, convert songs in mp3 or other format, use, for example, Xilisoft Audio Converter Pro. So, I've lost over 1 Tb music I have underlined a string where you can see name of codec.

Changing LEAD info using BAPI_LEAD_CHANGEMULTI

Similar Messages

Maybe you are looking for